Can not update music library

When I connect my ipod to my computer it tells me that I have 5 authorized computers and this device can no longer be updated.  I must deauthorize on of the other computers.  Under support it says that I should deauthorize all of the computers.  Will I lose my music libray if I do that?  Thanks!

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

Similar Messages

  • I can't open my itunes store.  I can open my music library and sync but not open my music store. I have deleted and reinstalled ituens and still not good.  Help

    I can't open my itunes store.  I can open my music library and sync but not open my music store. I have deleted and reinstalled ituens and still not good.  Help

    I assume you are talking about iTunes on your computer, if so, you will have to remove all Apple programs associated with iTunes:
    iTunes, QuickTime, Apple Software Update, Apple Mobile Device Support, Bonjour and Apple Application Support (iTunes 9 or later)
    Make sure everything that is by Apple is removed including Safari. You can sort by "Publisher", when you uninstall programs. Make sure you have at least one other web browser (like Firefox or Internet Explorer) before removing Safari. That way you can go back to the Apple web site and redownload iTunes later.
    Reboot the computer then reinstall iTunes. Everything should work normally.

  • Can not update -'Error -36' I REMOVED Music folder FROM IPod!!!!!!

    Hello!
    I accidentely removed whole folder (directory for music) from iPod several days ago.
    As a result my ipod is just empty- no music inside and I can not update that- because iTunes can't find the way.
    It says : ' unknown error -36 '
    Please tell me how I can resolve the issue?
      Windows XP  
    pc   Windows XP  

    Hi zen-an
    Welcome to Apple Discussions
    Does this link help?
    -36 or "Disk cannot be read from or written to" error syncing iPod in iTunes
    Regards,
    Colin R.

  • TS1368 I can not purchase music on iTunes. I get an error saying "The network connection was reset". But nothing has changed on the computer besides an update to my iPhone. How do I fix?  I have internet connection

    I can not purchase music on iTunes and nothing has changed with my computer. I get an error saying "The network connection was reset. Could not purchase."  I do have internet conncection.  How can I fix this?  I am able to do anything iTunes except purchase.  The only thing done recently was update iPhone and sync the phone. Help please

    Dear Jody..jone5
    Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
    Goodluck
    Atousa

  • I can access my music library, but not the Itunes store. Just getting a white screen. It starts to connect but just stops. Any suggestions?

    I can access my music library, but Itunes Store is not opening. I am just getting a white screen. Any suggestions?

    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that didn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter the Wi-Fi password.
    If that doesn't help, try here >  iOS: Troubleshooting Wi-Fi networks and connections
    No data is lost due to a reset.

  • Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????

    Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????

    Requirements for iPhone 5:
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.7 or later
    The highest version of iTunes you can install is 10.6.3 which will not sync with the iPhone 5.
    Roger Wilmut1 wrote:
    It's always a good idea to check the requirements before purchasing.
    The person I spoke with at 1-800-MY-APPLE gave me totally different info...she said the iPhone 5 would in fact sync with the older version of iTunes and that I could restore from my previous iPhone 4 backup and also bring in my music that way.  Hmmm....
    I'm inclined to go by the published specs, but now I have to jump thru a bunch of hoops I wasn't expecting to.

  • ITunes Library.itl not valid music library file

    "iTunes Library.itl not valid music library file" I get this error almost everytime I restart my computer. When itunes makes the new ".itl" file, not all of my music is listed in the library. I have read through a large amount of the forum posts on this topic and have not found a solution that works for me yet.
    How can I stop iTunes from doing this everytime I restart my computer?
    Is there a way to "repair" the damaged ".itl" so that I do not have to keep remaking my playlists?
    iTunes 6.0.1.3   Windows XP  

    It seems like the ITL file is not being properly written after iTunes closes. Then when you re-open iTunes, it cannot load the ITL file and creates a new one. Forcing you to recreate your Library manually, again and again.
    Several things to check:
    -Double check to see that the ITL file or the folder it resides in is not read-only.
    -Using Windows Explorer, right-click on the file (or folder) name, go to Properties.
    -If it is, then close iTunes, change it, and reopen iTunes.
    See this thread to reset the iTunes preferences: http://discussions.apple.com/message.jspa?messageID=1216090#1216090
    And see this post to use TweakUI to check the location and validity of your My Music 'Special Folder': http://discussions.apple.com/click.jspa?searchID=487067&messageID=1197027
    Once the main cause of the inability to save the ITL file is corrected, you'll need to recreate your Library one last time to finally save it. No way to resurrect the original one, unless you had backup copies of the ITL file.

  • Macbook pro not displaying music library: What do I need to do to show music files in Library? They are not showing up.

    macbook pro not displaying music library: What do I need to do to show music files in Library? They are not showing up.

    If you click View, Show Sidebar you will see the other libraries under Shared in the left hand column. Click on the Library you want and you can expand it to select Music, Movies etc. Select whatever items you want and click import if you want to move them to your Library.
    You will have to have all computers authorised with the relevant Apple ID's
    Store  >  Authorise this computer...
    This is separate from the Home Sharing username and password and is to allow playing of DRM Movies, TV shows etc from the other computer.
    If both Computers use the same apple id this step is not required.

  • Can not Update App Because Never "Owned Major Version"  I never owned any version.  It just appeared and now I cannot get rid of it.

    I cannot delete it with the X because it was never on my phone in the first place.  It doesn't show up when I hook it up to Itunes.  And it doesn't show up on my ipad.  The app is MotionXGPS.  Is it a virus?  Thanks.

    Same here. Just becoming a nightmare. Updated iTunes and now can't update apps it itself is showing as available updates. Count me in on the latest "You can not update this software since you have not owned the major version of this software." bug.
    Next I have to post about a new problem in iPhoto on a new thread.... it lost the "link" between some but not all photos I have in the library and what it itself posted to FaceBook a few hours ago...
    Incredibly frustrating.
    Imran

  • I downloaded the new version of iTunes 11.0.3 and now I get this error when I go to update Apps...any solutions????  You can not update this software since you have not owned the major version of this software.

    You can not update this software since you have not owned the major version of this software.
    any soultions???

    Same here. Just becoming a nightmare. Updated iTunes and now can't update apps it itself is showing as available updates. Count me in on the latest "You can not update this software since you have not owned the major version of this software." bug.
    Next I have to post about a new problem in iPhoto on a new thread.... it lost the "link" between some but not all photos I have in the library and what it itself posted to FaceBook a few hours ago...
    Incredibly frustrating.
    Imran

  • Can not update request in data target

    Hi,
    We have a process chain for master data (10 parallel) loads.  One of the load
    failed with error "can not update request REQU_46xxxxxxxxxxxxxx in data target".
    When I checked the InfoPackage
    (a) update: full load
    (b) it has data selection
    (c) processing :PSA and then to data targets
    (d) Data targets: update in all data targets for which active rules exist.
    But I do not see any list of data targets here.
    Can some one please suggest me how do I correct this load failure.
    Thanks

    Hi Wondewossen, NS and Nagesh,
    Thanks for the information. I am in support, and the developer is
    not here now.
    I have checked Header tab in the monitor, in this there
    is a update symbol and infosource name and an -->
    but after arrow there is nothing.
    when I click on this I get a message
    "No active update rules exist".
    Can you please advice me how to I correct this.
    Thanks

  • Can not update tab if its not the default sub-tab.

    Can not update tab if its not the default sub-tab.
    JDeveloper Version 10.1.2.1.0 (Build 1913)
    Hi. I have a problem with a “lovOpenWindowAction”
    The UIX is created with a master UIX and have several sub-tab that is included as UIX-pages.
    The lovOpenWindowAction lies in the included UIX-page
    The sub-tab I have a problem with has a table with users. Then I have a “Create New” button than I want to click on and select a new user that should be included in the table in the sub-tab.
    When I click on the button I open a LOV-window. Here I select the user that I want to add.
    In the LOV Action-class I save my new value in the database. Then in the method “onLovUpdate” I update the iterator with the new values from the database.
    But in my GUI the subtab is not updated until I click on it.
    But if I make the subtab the default subtab then it all works just fine and the GUI is updated directly.
    Here is the code for the tableAction in the subtab. This code lies in an included UIX-page. Target is the table id.
    <tableActions>
    <button text="Create New" id=" createNewRollperson" accessKey="N">
    <primaryClientAction>
    <lovOpenWindowAction destination="FiskeRollpersonerLOV.do"
    source=" createNewRollperson "
    targets="joinedRollpersfiskeer message"/>
    </primaryClientAction>
    </button>
    </tableActions>
    Here is some code from the master UIX-page
    <subTabLayout id="flikar">
    <subTabs>
    <subTabBar selectedIndex="${ui:defaulting(param.index,0)}">
    <contents>
    <link id="resorFlik" text="Resor"
    disabled="${sessionScope.fiske.id == null}"
    selected="${(param.source == 'resorFlik') or empty param.source}">
    <primaryClientAction>
    <firePartialAction event="changeTab" targets="flikar globalHeader">
    <parameters>
    <parameter key="source" value="resorFlik"/>
    </parameters>
    </firePartialAction>
    </primaryClientAction>
    </link>
    <link id="rollpersonerFlik" text="Rollpersoner"
    disabled="${sessionScope.fiske.id == null}"
    selected="${param.source == 'rollpersonerFlik'}">
    <primaryClientAction>
    <firePartialAction event="changeTab" targets="flikar globalHeader">
    <parameters>
    <parameter key="source" value="rollpersonerFlik"/>
    </parameters>
    </firePartialAction>
    </primaryClientAction>
    </link>
    </contents>
    </subTabBar>
    </subTabs>
    <contents>
    <switcher childName="${param.source}"
    defaultCase=”ResorFlik">
    <case name="resorFlik">
    <include node="${ctrl:parsePage(uix, 'includes/ResorFlik')}"/>
    </case>
    <case name="rollpersonerFlik">
    <include node="${ctrl:parsePage(uix, 'includes/FiskeRollpersonerFlik')}"/>
    </case>
    </switcher>
    </contents>
    </subTabLayout>
    What am I missing?? I can’t have this subtab as the default subtab! Please help me with a solution!

    hi,
    Change the condition type to manual entry.
    or
    for example delivery costs will be different at the time of PO and actual delivery costs then at the time of invoice we select planned delivery costs and settle them first with the actual delivery cost.
    Thanks & Regards,
    Kiran

  • I can not update creative cloud. Stuck at 2% with the following message: attempted connection to the server ... I have a pc

    hello
    I can not update creative cloud. Stuck at 2% with the following message: attempted connection to the server ...
    I have a pc
    pls help me

    restart your computer and retry.

  • My iphone4s can not update any apps. Nor is it able to download any new apps. What should I do?

    my iphone4s can not update any apps. Nor is it able to download any new apps. What should I do?
    I have two Apple Accounts. One in Switzerland and one in China. I used to be able to updates all of my apps by clicking individual apps. One day I clicked update all by accident. Ever since that, my iphone cannot update any of the apps. Nor is it able to download any new apps. Please kindly let me know how to make the phone back into work with the apps.
    Many thanks.

    I find it difficult to believe that it took you a year to realize your phone was defective.
    Restore the phone as new. Wait a couple of days before adding any apps to see if it's running ok. Then, add apps a couple at a time so that, if any of them cause issues, you'll have an idea which one.

  • My iPhone 4s iOS 7.0.4 will not update music or apps from iTunes 11.1.3.  this was true of my pc and the new MacPro.

    My iphone 4s ios 7/0/4 will not update music or apps from itunes 11.1.3.  this was true with my pc since ios 7.0.3 even with update 7.0.4 and now continues with my new MacPro also runing itunes 11.1.3.   as most state in previous threads, syncs all non itunes related data with no issue and appears to work correctly on itunes data but then hangs on the last step of updating until it times out.  i have tried marking specific music to transfer, setting up new playlist, deleting some old playlist on phone but stopped short of restoring my phone back to new due to the amount of non itunes data that i will lose.  The itunes setup on the macpro was completely with the download of all music from a previous external backup and the creation of new playlist - on the first sync with existing phone it did ask to overwrite all phone itunes data with macpro itunes data which i did accept - no different result - no changes on phone.

    Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved. 
    If the problem continues, take the device to Apple for evaluation and possible replacement.

Maybe you are looking for

  • External monitor resolution problem

    Hi, My external monitor's resolution is 1920 x 1080 but the highest I see in resolutions' list is 1600 X 900 or 1344 x 1008.  I am connecting my MacBook snow leopard to Asus ML249H with HDMI cable.  I've tried some suggestions that were posted for Ma

  • Dynamic lists that refresh automatically-advice needed

    I have an insert form with a menu/list box that draws from my main table records. Right now we have over 11,000 records but I created a table that filters it down to about half that. What I want to do, is make it so that as the visitor to the site wh

  • MIGO : Detailed steps for doing MIGO.

    Hi, Please help me with detailed steps for doing MIGO for the  delivery. Thanks, Edited by: hemaraaja on Jul 23, 2008 6:58 AM

  • Need HELP with JTree created by user input

    I have been trying to create code that takes a user input string ex: a:b,c;b:g,h,j;g:k,m;b:u note: (the above string is then stored into a string array such in the format a:bc;b:ghj;g:km;b:u after it is verified that the hierarchy order is correct) T

  • Linking contacts and deleting duplicates

    Hey guys, my contacts list from an old phone are divided between 3 export files and many of the contacts are repeating about 4 to 5 times when i import them to this phone. I have linked the contacts for now but what i really wanna do is delete all th