Can not update Term value for metadata columm field to empty

Hi ,
I have created a TermSet for Sitecollection and created Managed metadata column called Delivery linked with the Term (onsite , online, etc..) in the Term set . If i try to update the Term Value for Metadata Colum field to
blank ( e.g remove onsite so it has blank value) then click Save , it does not save the blank value it reverts back to the original value set for that metadata field. The metadata column is set "not to require to contain information"
& do not force unique value
Any idea
Thanks
mp

Hi,
I understand that you want to change a metadata column to be blank. I cannot reproduce your issue. I can set the managed metadata column to blank as expected. Can you reproduce this issue with another managed metadata column? Or does this happen to the only
managed metadata column?
Here are my steps to achieve this:
Open the root site of the site collection in browser.
Click Site Actions> Site Settings. Click Term Store Management under Site Administration.
Created the term store. Then create a managed metadata column to use this term store(have tested this column with both list and library).
Set "not to require to contain information" & do not force unique value &Allow fill in value& Don’t specify a default value.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

Similar Messages

TS3694 I can not update my iphone for resone 3004

I can not update my iphone for resone 3004

https://discussions.apple.com/thread/4034118
http://support.apple.com/kb/TS3694
https://discussions.apple.com/message/23024319#23024319
https://discussions.apple.com/message/23023773#23023773

How to raise a exception if the incoming value for a source field is empty

Dear all,
I have a scenario where the source and target structures are as follows :
The output for the above transformation logic is
The occurrence for field id in source and target is 1:1 Even if i don't provide the input value for id field,
system is not throwing any runtime exception.But if the field tag id is missing in incoming payload, then
system throws exception.
1) *** How can i raise a exception it the value for field id is empty
2) As the target structure occurrence for field id is 1:1 why system doesn't throw exception for null value
Regards
Koti Reddy

1) *** How can i raise a exception it the value for field id is empty
You need to impliment the check to throw the error
2) As the target structure occurrence for field id is 1:1 why system doesn't throw exception for null value
You are sending a blank value " " and the same is being passed. if you remove the tag from source xml it'll throw the error
Message was edited by: Hareesh Gampa

I can not update the software for my iPad 2 because it comes back with the note that I am not connected

What can I do , I tried to turn the iPad of and hold both. Button at the Same time but it still does not work

You don't need to create another post. Just keep responding to the first discussion that you started. I'm sorry that the restart and reboot didn't work, but it gets a little confusing when you create a new discussion every time you want to respond.

(SOLVED) can not update ArchLinux for about three weeks

Hello, I can not update my system for at least 3 weeks, someone could point me to the right direction? thank you in advance !
[bier@laptop-arch ~]$ sudo pacman -Syu
Password:
:: Synchronizing package databases...
core 103.8 KiB 58.7K/s 00:02 [######################] 100%
extra 1383.7 KiB 58.3K/s 00:24 [######################] 100%
community 1650.0 KiB 58.1K/s 00:28 [######################] 100%
archlinuxfr 32.9 KiB 27.5K/s 00:01 [######################] 100%
:: Starting full system upgrade...
:: Replace gnupg2 with core/gnupg? [Y/n] y
resolving dependencies...
warning: dependency cycle detected:
warning: util-linux will be installed before its udev dependency
warning: dependency cycle detected:
warning: rhino will be installed before its jre7-openjdk-headless dependency
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: jogl: requires java-runtime
Last edited by mabier (2012-03-30 08:15:42)

jasonwryan wrote:There is a heap of threads about this java thing already - please search the boards before posting...
yes, I find the solution here :https://bbs.archlinux.org/viewtopic.php?id=137836, thanks.

Default value for selection screen field

Hi all,
I am using LDB PNPCE. I want to give default value for field Personnel area on selection screen.
How can I do it?
Thanks
Rahul

Hi Rahul,
In the INITIALIZATION event we can set the default values for selection screen fields.
INITIALIZATION.
loop at screen.
if screen-name = 'S_MATNR-LOW'.
CLEAR S_MATNR.
s_matnr-low = '1234'.
s_matnr-option = 'EQ'.
s_matnr-sign = 'I'.
append s_matnr.
CLEAR S_MATNR.
s_matnr-high = '5678'.
s_matnr-option = 'EQ'.
s_matnr-sign = 'I'.
append s_matnr
clear s_matnr.
endif.
endloop.
Hope it helps.
Mark if useful
Regards,
Saumya

Have updated from Snow Leopard to Lion with Safari Version 5.0.5. Now I can not update to Safari 5.1. There is no update in the Software Updater, and on the apple-download page, I only found a Safari 5.1 for Snow Leopard. When executing it, there is an e

I have updated from Snow Leopard to Lion with Safari Version 5.0.5. Now I can not update to Safari 5.1. There is no update in the Software Updater, and on the apple-download page, I only found a Safari 5.1 for Snow Leopard. When executing it, there is an error message, that it is for 10.6 only.
It seems that I should have first updated Safari, and then only to Lion, which I didn't. Any idea how I can fix this now without having to rollback to Snow Leopard, update Safari and then go back to Lion?

Try this Safari5.1 from the installer package
http://www.filefactory.com/file/cc9005d/n/Safari.pkg.zip
The download worked better with Firefox not sure why. At the bottom of the page after the captcha>> slow down load is the Free link, it took about 4 minutes to download on my test.

Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????

Can not update iTunes because I have iMac with 10.5.8 . How I will sync my iphone 6.0 with an older version of iTunes on my iMac???? There is no update for the software of my iMac and no update for the iTunes.... So how can I sync????

Requirements for iPhone 5:
Syncing with iTunes on a Mac or PC requires:
Mac: OS X v10.6.8 or later
PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
iTunes 10.7 or later
The highest version of iTunes you can install is 10.6.3 which will not sync with the iPhone 5.
Roger Wilmut1 wrote:
It's always a good idea to check the requirements before purchasing.
The person I spoke with at 1-800-MY-APPLE gave me totally different info...she said the iPhone 5 would in fact sync with the older version of iTunes and that I could restore from my previous iPhone 4 backup and also bring in my music that way. Hmmm....
I'm inclined to go by the published specs, but now I have to jump thru a bunch of hoops I wasn't expecting to.

HT204053 i'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't upadte my free software, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOTOWNED THE MAJOR VERSION OF THIS SOFTWARE" so how I ca

I'm using same apple id for my ipad & ipod but after start using the same apple id on my ipad, i can't update my free software downloaded on both, it's showing "YOU CAN NOT UPDATE THIS SOFTWARE SINCE YOU HAVE NOT OWNED THE MAJOR VERSION OF THIS SOFTWARE" so how i can update my softwares on ipad & ipod using the same apple id

I think the issue is that iTunes (for whatever reason) thinks I have two Apple ID's.
also, to further complicate the issue, when i try updating the apps from my iPod the iTunes store is still recognizing my old hotmail Apple ID. So when I go to enter my password it won't accept because it doesn't match with the old Apple ID, even though it is the same account (just new Apple ID name).
I have tried signing out within the App Store and re-signing in with my Apple ID but it still brings up my old Apple ID name when I try to update.

HT2968 I can not update several of my apps that i have purchased a while back in my Apps Store on my MacPro. Because it keeps using my old @me account for iTunes and i don't remember the password or security question, Please help?

I can not update several of my apps that i have purchased a while back in my Apps Store on my MacPro. Because it keeps using my old @me account for iTunes and i don't remember the password or security question, Please help?

Hi AlphaCentori,
If you are having issues accessing the Apple ID that was used to originally purchase those apps, you may find the following article helpful:
Apple Support: Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/ht5312
Regards,
- Brenden

Can not Update icloud for win7 Sheep error during transformation. check that the indicated transmitter propagating path is valid. tryet in appel updater and tryet downloading from apple but the same

Can not Update icloud for win7 Gets
Sheep error during transformation. check that the indicated transmitter propagating path is valid.
tryet in appel updater and tryet downloading from apple but the same

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

Installed 11.0.3 today. Tried to update apps. iTunes response was, "You can not update this software since you have not owned the major version of this software." I REALLY don't understand. I paid for MANY applications and stole or borrowed NOTHING.

Installed 11.0.3 today. Tried to update apps. iTunes response was, "You can not update this software since you have not owned the major version of this software." I REALLY don't understand. I paid for MANY applications and stole or borrowed NOTHING.

Hi 969Polyglot969,
You may want to report an issue with the affected apps using the instructions in this article:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/HT1933
I hope this helps!
- Ari

Hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?, hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?

hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?, hey guys . . how come I get updates, but can not updates them as they are "not applicable" for the "version" of the pad?

The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

HT4484 i used to have an app store and lost it and i created a new one and i can not update the iphoto app because it was updated with the old account, is there a solution for this problem?

i used to have an app store and lost it and i created a new one and i can not update the iphoto app on my macbook pro because it was updated with the old account, is there a solution for this problem?

Content and Apple IDs -
Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID.

I would like to inform you that my account suspended and I can not update applications have been refused my credit card and when my review of a bank to get the reason for the refusal card, the bank employee as explained by you please do me a proper soluti

I would like to inform you that my account suspended and I can not update applications have been refused my credit card and when my review of a bank to get the reason for the refusal card, the bank employee as explained by you please do me a proper soluti

We are all itunes users just like you. Informing us is of little use.
Contact itunes support

Can not update Term value for metadata columm field to empty

Similar Messages

Maybe you are looking for