Can not use Blackberry Messenger On Playbook

hi all..... does anyone can explain about my problem......?
i have blackberry 9780 work on the latest OS, Blackberry bridge 1.0.0.83, BBM 6, and i still cannot use my BBM on my playbook. i already try to delete the bridge on my BB 9780 and reinstall it again and again, i still can't do the bbm right. it always shows blank screen when i tried to load it on my playbook.
well i tried to use my friend Blackberry the same 9780 OS and BBM, well it works well....
i also tried Blackberry 9700 with OS 6 and BBM 6 it also do the white screen on my playbook
does this mean that playbook only work on certain blackberry only?
Solved!
Go to Solution.

You have the latest software versions.
Try deleting the bluetooth connection between the
2 devices, and reboot both devices.
Try repairing the devices, this worked for me.
Are you doing this as a BES, u may have an IT policy in place
that needs to be removed.
Be a Shepard and not an iSheep.

Similar Messages

I do not have blackberry messenger in my phone, Can i get a file and install it on my phone

I do not have blackberry messenger in my phone, Can i get a file and install it on my phone

Connect your device via USB-cable to the computer.
Launch Internet Explorer
Open this address: http://na.blackberry.com/eng/services/devices/
Click on "Update Now" button
Popup will be displayed, now open the applications list, find BB Messenger in the apps list and check it to install.

I can't use Yahoo messenger (it doesn't open the dialogue window), but in other PCs with older versions of Firefox I don't have problems

I can't use Yahoo messenger (it doesn't open the dialogue window), but in other PCs with older versions of Firefox I don't have problems
As stated earlier even though when I have an incoming message I hear the "Beep" Firefox does not open the dialogue window as it used to do.
Also I am not able to open a new dialogue window or tab by clicking on an online contact of mine.

Known issue, See:
* https://bugzilla.mozilla.org/show_bug.cgi?id=713014
this issue maybe fixed in beta/ nightly, you should try it
* firefox.com/beta

HT4101 My iPad is tellin me I can not use the camera connector because it uses too much power..... ***

My iPad is tellin me I can not use the camera connector because it uses too much power..... ***

I'm having same problems. If I connect my blackberry it says it uses too much power. If I take sd card out of phone and connect that way I get the same message. The leaflet with the connector says go to Apple.com/support/iPad to find list of compatible cameras.......... I'm still trawling the site to find any such list! Just need to know if it will work with a blackberry ..... If not I've got to take it back. Have been advised by a friend to cut my losses get my money back and use Bump to transfer my pics. I don't own a traditional camera because my phone has a great one. Really don't want to have to carry a camera about with me! They don't make it easy do they!

How can i update blackberry messenger ?

how can i update   blackberry messenger ?

Use your BlackBerry browser to go to www.blackberry.com/bbm
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Can not use all the tools in my drawing markups any ideas on getting them to work?

Can not use all the tools in my drawing markups any ideas on getting them to work?

Hi tonys60181,
Could you please let me know what version of Adobe Acrobat are you using.
What all drawing tools are you unable to access?
Is this issue specific to one PDF file or all?
What exactly happens when you try to use any drawing markup?
Please let me know.
Regards,
Anubha

Can not use TOUCH function on Nokia 6600 slide

Can not use TOUCH function on Nokia 6600 slide-
turned on sensor in phone settings, but when i touch the PHONE it does not work.
Please, tell me how use this function or maybe my phone is out of order

As long as your Sensor Settings are On within Menu, Settings, Phone, Sensor Settings then you just need to do the following -
Tapping
The tap function allows you to quickly
mute and reject calls and alarm tones, and
to display a clock just by double-tapping
the back or front of the phone when the
slide is closed.
Select Menu > Settings > Phone >
Sensor settings to activate the tap
function and vibration feedback.
Mute calls or alarms
Double-tap the phone.
Reject a call or snooze an alarm after
muting it
Double-tap the phone again.
Display the clock
Double-tap the phone.
(If you have missed calls or received new
messages, you must view them before you
can see the clock.)
Simply, if you double tap the screen when the slide is closed and you can see the clock appear then it is working.
I hope this makes it clearer for you.
Full Manual here - http://nds1.nokia.com/phones/files/guides/Nokia_6600_slide_UG_en.pdf

I can not use my mouse or keyboard when I am trying to install windows via boot camp

Please can you help!
I can not use my mouse or keyboard when I am trying to install windows via boot camp

Starting a couple of days ago my mouse and keyboard stopped working suddenly.
How are they connected? In my case they are wireless and their receiver is plugged into my USB hub. After an update I found the OS inexplicably not recognizing my USB hub and hence any devices which were plugged into it. My fix was to
plug the receiver into a different USB port (so I could use the mouse and keyboard; otherwise I would have had to use the OSK via Touch or pen.) Once I had normal access into my machine again I used Device Manager to remove all USB controller and
hubs (including hidden ones) and I then shut down, disconnected all USB devices and powered back up, this time using only Touch to get going. Once the OS had settled down I started plugging stuff back in the way that I wanted it to be recognized.
If I didn't have Touch I would have had to have left the wireless receiver plugged in both places which I assume would be OK. I have no idea why updates have such a catastrophic effect for USB devices.
Robert Aldwinckle

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens, but I get the error next time it opens, and this is going on and on where I can not use LR, any suggestions?

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
Thanks
Carol

The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

In my numeric key pad I can not use the (.) dot because it has a (,) and it is not working in calculations. What I can do?

In my numeric key pad I can not use the decimal dot (.) because it has a (,) and this not work with decimal calculations. What I can do? Help ………

IT NOT WORK IN MEXICO. THANKS A LOT. BEST REGARDS. MANUEL LOPEZ
El 6/2/2015, a las 16:50, Apple Support Communities Updates <[email protected]> escribió:
You received a reply
SGIII has replied to your question. You can view the full discussion in Apple Support Communities.
In my numeric key pad I can not use the (.) dot because it has a (,) and it is not working in calculations. What I can do?
Correct Answer Helpful Answer
Use the buttons above to tell SGIII and the rest of the community if this reply solved your question or helped you get closer to finding a solution.
To reply to SGIII, go to the discussion in Apple Support Communities.
You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to iCloud, following your instructions and now I can not use my mobileme e-mail address. How can I contact directly with Apple, not just an automatic reply phone number

I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to icloud following all your instructions and now I can not use my mobile me e-mail address. I can not activate icloud because when I put my e-mail address it answers that somebody is already using my address. I have my old e-mails, but I can not receive any e-mail or send them.
I have contacted Apple Technical Support in Spain and I was sent an e-mail saying that I have to call a phone number and when I call it is always an answering machine who answers that says that I have to pay 50€ for a consultation or wait for 10 minutes. When I have made the consultation it was never mentioned that I have to pay 50€ for a phone consultation. If I don't want to wait I have to pay for the Apple Tecnical Support which cost 250 €, this was not mentioned in the technical support page.
Can somebody let me know how can I contact Apple in another way in order to talk with a human being or chat directly? I was very happy just using my mobileme e-mails, I didn't need any clouds and I was force by Apple to registered if I want to continue using my mobileme e-mail address.

Sandra,
See this Apple support document for information on reporting an issue with your iTunes purchase.
http://support.apple.com/kb/HT1933
B-rock

I brought a macbook pro, but i can not use my apple id.because its already register onther account.i couldnt found that person.i want reset that account,can tell me how can i do this?

i brought a macbook pro, but i can not use my apple id.because its already register onther account.i couldnt found that person.i want reset that account,can tell me how can i do this?

maxsurovi wrote:
i brought a macbook pro, but i can not use my apple id.because its already register onther account.i couldnt found that person.i want reset that account,can tell me how can i do this?
Restore the Mac to Factorty settings to make it Truly Yours.
Note:
This should have been done before you took possession...
Apple What to do before selling or giving away your Mac
http://support.apple.com/kb/HT5189?viewlocale=en_US&locale=en_US
Also See Thomas Reed's How to Prepare your Mac for sale

I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use

@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

TS3988 My icloud account is not verifying it says check my mail witch I have done and I get a message say your iPhone for has been used to set up and Icloud account but still can not use the icloud can anybody help me.

My icloud account is not verifying it says check my mail witch I have done and I get a message say your iPhone for has been used to set up and Icloud account but still can not use the icloud can anybody help me.

Be sure you are checking the email account that you used to set up the Apple ID you used to create the iCloud account. Also, be sure to check your spam/junk folder as well as your inbox. The email you should receive looks like the image below. When you get it, click the Verify Now link.
If it still isn't there, try going to https://appleid.apple.com, click Manage your Apple ID, sign in, click on Name, ID and Email addresses on the left, then to the right look for a link to resend the verification email.

I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

I have an apple id but ı can not use it for sign in to itunes connect account while publishing my ibook document. Why ı can not login? What can ı do to figure out this problem?

As note already on the iBA forum [ AppleID for ibooks publishing ], you need two IDs. You can't use your developer ID.
If you already signed up for books with that ID, you need to talk to Apple to straighten things out.

Can not use Blackberry Messenger On Playbook

Similar Messages

Maybe you are looking for