Can not use my Satellite A200 with TV

Hi,
sorry to bother you all with this - I recently purchased a Satellite A200-A1L and have been trying to connect it to my TV via s-video leads... I am not new to this and know how to set it up but I seem to be having problems doing it on this laptop.
I have enabled the TV and set up everything to go but my TV will not pick up the signal or the signal is not being put out by the graphics card? My previous laptop worked fine with s-video and the same TV I still own (a 24" Sony Trinitron). I purchased this laptop to do the same but it seems that it will not work - is there anything you can do to help me please?
Despite trying all the functions and reading in depth everything to do with the video outputs AND everything saying its running fine it just wont work HELP ME!!!
PS: I am happy with the laptop in general it is a nice piece of kit, I am just unhappy that the s-video will not run properly.
Kind regards, Lisa.

hi buddy, sorry to say i tried that but i get no signal. i dont have a lcd tv i have a sony trinitron, which worked fine before with s-vid. as i say i have tried everything in the book to get this running but to no avail..... all help would be greatly appreciated. a friend of mine had this exact problem too - he upgraded his laptop and could no longer use the s-vid with his older tv. to solve the problem he went out and bought an lcd tv. working fine now. if i had the money i would have 1 already and know it would work fine but i dont PLS PLS PLS help me

Similar Messages

  • Can not use default screen saver with this version of Mac OS X

    Hello,
    I created a 10.6.4 image on a Mac Pro that I have installed on a new 27" iMac. Every thing works fine, as expected, except the screen savers (all Apple default). All screen savers appear in the list when booted off the Mac Pro, but when booted off the iMac, all but 2 disappear (Computer Name and Flurry). Also, the ones listed under Pictures show up, but when I try to use one it says "Can not use 'screen saver name' with this version of Mac OS X - Contact your vendor."
    Also, the flurry screen saver runs extremely slow.
    Unfortunately, I don't have another iMac to compare versions with, but I've compared with a new Macbook Pro and they are exactly the same. Is there a cache or a pref I can flush?

    The old screensavers were about the first things that didn't work when moving to Snow Leopard, so my guess would be the iMac is booting in 32-bit vs 64-bit mode (or whichever mode is incompatible with your screensavers).

  • I can not use mac book air with samsung galaxy 3 to transfer files. i download the  OS X mountain line version the latest one...how can i introduce them each other?

    i can not use mac book air with samsung galaxy 3 to transfer files. i download the  OS X 10.8.1 mountain line version the latest one...how can i introduce them each other?

    Thanks how do I get the latest version then? online its asking me to submit address details and all sort and I'm not keen to do that, I'm working away from the city I bought it in and there is no Apple Store near me yet?

  • Can not use 'AT LINE-SELECTION' with SET PF-STATUS

    Hi experts,
    my code is like below:
    PARAMATERS: .....
    SET PF-STATUS 'st_nam'.
    Perform Load_data . ' For list display
    START-OF-SELECTION.
    AT LINE-SELECTION.
      Perform list_detail.
    AT USER-COMMAND.
      CALL SCREEN '1001'.
    END-OF-SELECTION.
    When I execute the report , the basic was displayed , but when then i double click on the list to call the next screen '1001'. It did not work , but if i omit the SET PF-STATUS m AT LINE-SELECTION worked week , so in this case what has happened i how can i solve this problem,
    Thaks,
    PS: Reward immediately

    Hi,
    Thank you very much for your helpful answers, I have copied the report downto my system and test it , When i used SET PF-STATUS , i can not use AT LINE-SELECTION to capture events ...May be we can not use these 2 statements in parallel,...:D
    Thanks,

  • Why my iphone5 can not use the weather function with the mobile internet?

    I just bought an iphone5, but the weather software doesn't work if not using wifi, the support people told me that Apple desined this only for wifi, but I don't think so, pls help to find a solution

    As the attached article shows, AirPlay Mirroring requires an iMac to be from mid-2011 or newer.
    You should be able to use AirPlay to send music (but not video or pictures) from your iMac to speakers.
    http://support.apple.com/kb/SP654

  • Using SMTP I can not use a mail server with more than 13 characters. I get an error from TCP open

    I have no trouble sending an email if the mail server name is less than 13 characters long. I get an error 54 from TCP open when it exceeds that length. How do I get around this?

    Don't know what to say, I just tried the SMTP email VI I have with an 18-character mail server address and everything worked fine. The error 54 means that the address is ill-formed.
    The only thing I would suggest is trace the mail-server address down through the hierarchy and make sure nothing is done to modify it. Also try putting a probe on the wire going into the TCP open function and make sure the string you see there is the same one you are using. Finally, change the formatting of the control taking the address into the subvi that contains the TCP open function (SMTP Open Session.vi)to show the slash codes and make sure some invisible characters aren't getting added along the way.
    As a last resort save the vi in 6.0 format and send it to me and I'll
    try it on my system--maybe there's something screwy going on with your computer...
    Mike...
    Certified Professional Instructor
    Certified LabVIEW Architect
    LabVIEW Champion
    "... after all, He's not a tame lion..."
    Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

  • Why i can not use whatsapp in ipad with cellular

    i want to use whatsapp in ipad mini cellular, any body can help me

    Simply because whatsapp doesn't support iPad. And never it will....

  • Why I can not use IPod camera-connector with IPod touch ?

    please help !

    Because Apple didn't make the hardware compatible. No one here is going to have any other answers. I would point out that there are apparently differences in the docking port, either hardware or software. Older third party docks, as an example, don't work properly or at all with the newer iPods. I suspect it's related to authentication/DRM issues for movie rentals. This could be related but we'll probably never know.
    +But why????????+
    Because Steve said so!

  • Satellite P200D-134 - can not use the Toshiba DVD player

    I have the Satellite P200D-134 and can not use the Toshiba DVD player.
    It displays an error message.
    "Required modules missing for this application"
    In Vista it worked everything fine.
    Now I upgraded Windows 7 Ultimate and all Toshiba programs are gone.
    And I can not use the Software HD DVD player or other Software from Toshiba.
    What should I do?
    Does anyone have any advice? Is there any help?
    Please write back in German or English.
    Thank you!
    Rob

    Hi
    Did you install the VAP (value added package)?
    If not do that!!!
    Furthermore I recommend installing the DVD Player Update Check Tool which can be found on the Toshiba European driver page.
    With this tool, you can check your notebook, if your DVD-Player needs a Upgrade and if yes, it gives you the download link for the needed upgrade version.
    By the way: If you cannot find the DVD Player for Win 7 in P200D section then you can download this from the P500 section!

  • I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to iCloud, following your instructions and now I can not use my mobileme e-mail address. How can I contact directly with Apple, not just an automatic reply phone number

    I'm exhausted of trying to find a solution to a problem created by Apple. I have moved to icloud following all your instructions and now I can not use my mobile me e-mail address. I can not activate icloud because when I put my e-mail address it answers that somebody is already using my address. I have my old e-mails, but I can not receive any e-mail or send them.
    I have contacted Apple Technical Support in Spain and I was sent an e-mail saying that I have to call a phone number and when I call it is always an answering machine who answers that says that I have to pay 50€ for a consultation or wait for 10 minutes. When I have made the consultation it was never mentioned that I have to pay 50€ for a phone consultation. If I don't want to wait I have to pay for the Apple Tecnical Support which cost 250 €, this was not mentioned in the technical support page.
    Can somebody let me know how can I contact Apple in another way in order to talk with a human being or chat directly? I was very happy just using my mobileme e-mails, I didn't need any clouds and I was force by Apple to registered if I want to continue using my mobileme e-mail address.

    Sandra,
    See this Apple support document for information on reporting an issue with your iTunes purchase.
    http://support.apple.com/kb/HT1933
    B-rock

  • I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    I was trying to get the iOS 8.2 on my iPhone 5 but then it stopped and my phone is now on recovery mode I have pictures I need and they did not all fit on iCloud  how can I use the phone again with ALL my pictures and videos without restoring it?

    Contacts are designed to be synced to a supported application on the computer or a cloud service.
    Pictures taken with the device are designed to regularly be copied off the device to a computer as would be done with any digital camera.
    If you have failed to use the device as designed it may be too late to recovery anything.
    Is the device regularly backed up to a computer via iTunes?  If so, the most recent backup (when restored to a replacement iOS device) should contain all contacts and pictures as of when the backup was created.

  • I can no longer download and save files. They are now saved with a ".part" suffix that I can not use or open. What happened, I used to do this all the time?

    Downloads seem to be happening normally at first but the file shows up with a file extension of ".part" that I can not use or open. If I refresh the folder where it was downloaded to, it disappears as though it wasn't there at all.
    I used to do this and it just yesterday started to give me problems. It doesn't seem to matter what file type I do this with as PDF, MP3 and EXE files have all shown this problem.
    Please help!

    It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
    Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
    See also "Disable virus scanning in Firefox preferences - Windows"
    * http://kb.mozillazine.org/Unable_to_save_or_download_files

  • Have been having issues with firefox crashing & v e r r y s l o w also sluggish, I removed by the programs & features than redownloaded it, I can not use it.

    Had to remove it for the last & final time. I love & miss my Firefox, but can't take the chance of someone getting into my system. The upgrade had yahoo toolbar which is always easy to get rid of (thank God) but I have this yellow sign in my popup that says something about the system not being safe, & we can not go to any web sites. Why is it everything that is upgraded always turns out to be BULL. I can not use Firefox for anything, so once again had to remove it using the programs & features update/remove. Windows7 Home Premium 64-bit Operating System. HELP.

    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your bookmarks, history, passwords, cookies, and other essential information.
    '''''Note:''' After resetting Firefox, you will lose any extensions, toolbar customizations, and some preferences.'' See the [[Reset Firefox – easily fix most problems]] article for more information.
    To Reset Firefox:
    # Open the Troubleshooting Information page using one of these methods:
    #*Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''. A new tab containing your troubleshooting information should open.
    #*If you're unable to access the Help menu, type '''about:support''' in your address bar to bring up the Troubleshooting Information page.
    #At the top right corner of the page, you should see a button that says "Reset Firefox" that looks like this: [[Image:Button reset]]. Click on it.
    #Firefox will close and reset. After it is done, Firefox will show a window with the information that is imported.
    #Click Finish and Firefox will reopen.
    Did this fix the problem? Please report back to us!

  • I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same displa

    I have a problem with my iPhone 5 stopped working the sleep / power and simultaneously refused to obey the HOME button. I can not use either one or the other. I can not enable or disable the device, display lights up when you plug the charger. same display works fine as it is surprising. or maybe someone knows what is the reason for this? is there any way to solve this problem?

    More than likely its a hardware issue, I have never encountered such a problem and best bet is to just go get it replaced. If you have insurance on your device apple will replace it as long as there was no water damage, if you dont have insurance they will charge $200 more or less. Hope you get it fixed

  • I can not use CanoScan N670U with my Macbook pro. I download canoscan toolbox 4.1 from Cannon website. It keep saying "the scanner plug-in was not found". Please help

    I can not use CanaScan N670U with my Macbook Pro. I download Canoscan toolbox 4.1 from Cannon websit. It still keep saying "The scanner plug-in was not found". Please help

    There is a solution (I'm running Snow Leopard on a Core2Duo iMac, but this problem arose when I was running Leopard on a G4 PowerBook too).
    Problem:
    You download the OS X driver for the scanner from Canon's site. I already had the CanoScan Toolbox (4.1) stored on an external drive.
    You unzip the driver and run the VISE installer. After a search it finds your copy of Photoshop (and maybe even the CanoScan Toolbox), and you click to install on that/those location(s).
    You get a couple of error messages, which you click through.
    You restart your computer and try to run the scanner but you get an error that the driver is wrong or missing and the process will abort.
    Solution:
    BEFORE you restart, and with the installer package still open -
    1. Copy the Into_CFMSupport_Login & Into_CMPrefs folders to
    Applications : Canon Utilities
    Applications : Canoscan Toolbox
    and remove the prefix Into_ from each folder
    2. Check whether the installer placed N067U_Library.shlb into the top level (not User level)
    Library : CFMSupport
    and if it didn't, move it there yourself
    THEN restart, and try again. It worked for me (via Photoshop), but whether it will work for everyone, I don't know.

Maybe you are looking for