Can not use, or open, a recovered project with extension .rcproject

I had been working in a project for a couple of weeks, I was putting together a bunch of clips from different road trips and re-unions that I had with some friends.
One day I was removing video that I had marked as rejected. I selected the rejected video and tried to send it to the trash by selecting Move Rejected Clips to Trash from the File menu. When trying to send it to the trash my project was erased and iMovie froze right away. iMovie restarted but my project was not there anymore. I looked in the iMovie folder and there my project was, with a .rcproject extension. I made a copy of this right away. I tried to open this weird extension project by double clicking it, iMovie opens when I do this, but my project does not load.
So here's my question, how, if possible, can I review my "recovered" project and keep working on it?

So here's my question, how, if possible, can I review my "recovered" project and keep working on it?
I would normally assume that all of your "resource" pointers were "orphaned" by the removing of the project file. While it is theoretically possible to restore the file to its former location and check to see the pointers are re-instated, I personally would not bother to try and manually correct them if the pointers themselves have been changed. The "forté" of iMovie '08 is your ability to quickly edit content and, generally speaking, I find it easier to re-edit the project material than to manually edit all of the individual project package files.

Similar Messages

I can no longer download and save files. They are now saved with a ".part" suffix that I can not use or open. What happened, I used to do this all the time?

Downloads seem to be happening normally at first but the file shows up with a file extension of ".part" that I can not use or open. If I refresh the folder where it was downloaded to, it disappears as though it wasn't there at all.
I used to do this and it just yesterday started to give me problems. It doesn't seem to matter what file type I do this with as PDF, MP3 and EXE files have all shown this problem.
Please help!

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
Try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See also "Disable virus scanning in Firefox preferences - Windows"
* http://kb.mozillazine.org/Unable_to_save_or_download_files

I can not use the adobe reader version 10 with mozilla 4.01 - what to do

i can not use the adobe reader version 10 with mozilla 4.01 - what to do

Here, I finally have a solution.
Gotta love Google.
More helpful than Adobe so far.
Note: Clicking on the link below will immediately open the download dialogue box.
ftp://ftp.adobe.com/pub/adobe/reader/win/10.x/10.1.1/en_US/AdbeRdr1011_en_US.exe
I used this download to install, and the Installer was flawless.
Thanks everyone who contributed ideas and potential solutions.

Can not use the UStream.TV chat feature with Foxfire. Works with Explorer

I can not run the chat feature that UStream.tv provides. One example is here: http://desertsunburn.no-ip.org/tucson.html but all the sites have tried do the same thing. It works fine with Explorer.
Looking at the comments on the web, it is not a new problem and there is somehow something wrong in Foxfire not allowing this chat to work??? It sits at a revolving circle and then times out.
Please help and thank you

HI Jeffrey,
Go to Safari / Preferences. Select the Security tab.
Where you see: Fraudulent sites: Deslect Warn when visiting a fraudulent website.
Restart your Mac.
Now try that website.
Try Safari maintenance also.
From the Safari Menu Bar, click Safari / Empty Cache. When you are done with that...
from the Safari Menu Bar, click Safari / Reset Safari. Select the top 5 buttons and click Reset.
Mac OS: Web Browser Quits Unexpectedly or Stops Responding
Carolyn

After I updated iOS 5 can´t use the "open with" for mail attachments.

After I updated iOS 5 on my iPad 2, I can not use the "open with" for mail attachments. The option is not appearing.
For example, when I try to open an .wmv attachment the iOS 5 doesn´t show "open with". Before update, I was able to open with "AZUL" software.
Can anyone help me?

You did say that the option does not appear at all in mail no matter which file type you want to open correct? I can only assume that something went corrupt in the update that affected your settings and that's why this option no longer appears. For experimental purposes, you could try emailing a PDF to yourself and see if that will allow you to use the Open in function in the mail app.
If nobody else jumps into this discussion with a different idea, then maybe you should try restoring your iPad. The best way to do so is - first backup the device - and then restore to factory settings and then you can try restoring from a backup at the end of the process.
However, if one of your settings is corrupt, the backup will be corrupt as well. It may be that you will have to restore to factory settings and then start all over again - adding your apps and content back to the device to get the best results. I would certainly use this process as a last resort. Restoring from a backup maybe all that you need to do.

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens, but I get the error next time it opens, and this is going on and on where I can not use LR, any suggestions?

I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
Thanks
Carol

The first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.

I subscribe to premium and I can not open the adobe Revel in my ipad I oactualizarlo. I paid through September 2014 -.'s happening I can not use what I have already paid?

I subscribe to premium and I can not open the adobe Revel in my ipad I oactualizarlo. I paid through September 2014 -.'s happening I can not use what I have already paid?

Please see the response at:
Adobe Revel 2.3.2 installation issue

TS3992 I got a problem in my ipad2 due to "icloud backup message". I can't open my unit and am worried that I can not use my ipad anymore. What can I do. Please help me. Thank you & GOD BLESS!

I got a problem in my ipad2 due to "icloud backup message". I can't open my unit and am worried that I can not use my ipad anymore. What can I do. Please help me. Thank you & GOD BLESS!

Try to reset it. just press hold the on/off botton (ignore the red slider) just hold it then the ipad is automatically reset. dont worry about your file, there nothing happen to it. Godbless.

TS3694 I forgot my password and could not open until it is said "connect to iTunes". I connected to iTunes. for three hours, I restored it. But it is still not restarted. what can I do? I can not use my iPad 3 for three days. Please help me!

I forgot my password and could not open until it is said "connect to iTunes". I connected to iTunes. for three hours, I restored it. But it is still not restarted. what can I do? I can not use my iPad 3 for three days. Please help me!

Try and force your iPad into Recovery Mode
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.
3.While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears, release the Home button. iTunes should alert you that it has detected a device in recovery mode. Click OK, and then click Restore to restore the device.

Downloaded 3.6.13 today and now I can not use my right click function when trying to open a new tab!

When browsing the net I can not use my right click function on a link to open a new tab. How can I fix this? It was working fine until I downloaded 3.6.13 Firefox this am.

I un-installed the yahoo toolbar and my problem was solved!!!!

No video output option at movie project setting can not use my blackmagic video card

no video output option at movie project setting can not use my blackmagic video card

There's no change if I hold command-R to boot into recovery. The mac chimes on powerup but nothing else seems to happen.
The machine has an SSD drive in it so I can't even listen to hear if it is loading anything or acting differently when I try different keypresses.
As I had some spare RAM lying around, I've tried swapping that in but no change there either. I still suspect it's a software rather than hardware problem, but without any way to control the boot up, I'm not sure how I can fix it.
I do have remote time machine backups - is there any way of restoring these manually, perhaps by removing the drive from the mac and copying the backup data over using another system? (Unfortunately I don't have any other mac systems to experiment with this, though)

How can I use time machine to recover my iWeb09 files?

I read that iWeb stores one's website pages in the domain folder which can be located at ~/Library/Application Support/iWeb. Can I use time machine to recover my iWeb09 files? If so, how? -I tried. I entered my Time Machine back up, and went back in time and brought the domain file forward but it opened only my current site pages, not the ones I am trying to recover. And it says the Domain file was last modified in October 2007 which is crazy because I've been using iWeb a lot and have published many pages. It seems like the uncorrupted pages, which I am trying to recover, existed somewhere on my computer at one point in time and space, less than a week ago, becuse I just published my site to a new hosting service since Apple will soon stop web hosting. So why can I not find them using time machine?

I continued searching and read another person's advise to down load an app named "Find File," then search for .sites. She said spotlight doesn't always find all files. So I did and sure enough, when I searched for .sites I found another Domain package, which I have no idea how it was created but which, it ends up, was the one actually being used by iWeb. So I went to that package then did the time machine and went back to before my web pages became corrupted. I had to delete corrupt blog pages out of my website menu to get iWeb to upload the other page changes even to a local folder.
So I went to that newly found Domain, went back in time, then brought that forward and as you pointed out the domain package had the parts of the pages, the files and jpegs, but not the structure/layout of the pages. So, I guess I gave up on finding the old pages.
Those pages still exist on the Apple hosting server but iWeb doesn't not reverse publication. Cyberduck would bring back the files and bits and peices but again not the pages as a total entity. I'm preparing for the end of Apple website hosting (next month?) and am republishing my old site. I decided to use a new domain name. So my entire original site is still totally intact on the web under the original domain name, on my mobile me site, I guess it will be there till sometime in June?
My problems started when I tried to publish my website to the new server. It just would not publish the whole website in one session. So I decided to do it a few pages at a time. Some pages went up, but as I added more, for some unknown reason the, blog pages, (about 70 subpages), which had aleardy uploaded just fine to the new server, became corrupt and locked up iWeb. Of course once I deleted the corrupt pages I didn't want to continue publishing the site to the host until I found and reinserted uncorrupted pages, knowing publishing changes would delete the already published pages.
At first I thought it was the hosting server's fault, but when I discovered that it wouldn't publish even to a local fold I was able to locate the cause within iWeb, deleted those pages then tested by publishing to a local folder. iWeb worked locally, so I knew I had found the problem pages. Well this is way more than you wanted to know. Thanks for your advise but I'll just start the blogging pages over.

What program can I use to open BUP files?

Hello,
I downloaded several videos from my camcorder and they came over as BUP files? (also as IFO files and VOB files) What program, if any, can i use to open them? Or what can I do to change them? thanks!!

It's a project manager piece of software from OmniGroup. They are coming out with an iPad version but not soon enough for my needs.

Can I use AdvancedDatagrid in an opensource project?

I have a student Flex Builder education license. Can I use
AdvancedDatagrid in an opensource project?

I am new to Swing, and I would like to know, if is
possible create a application using Swing as view tier
in a J2EE(EJB) project? Yes, it is entirely possible, they are usually called Rich Clients (as in functionality) and may or may not use RMI/EJB. They typically also include the Controller (from MVC pattern) in the Client. The EJB represent the model, remember that the MVC is a Client Server Pattern, not an J2EE pattern.
Did anybody create one yet?Yes, the idea is not uncommon, you can read a more here:
http://www.google.co.uk/search?hl=en&ie=ISO-8859-1&q=Rich+Swing+Java+Client&btnG=Google+Search&meta=
How many J2EE projects do you know which Swing is used
as view tier? Using Swing is so much more complicate
than a ordinary output in HTML? No, just different. Instead of doing each action in your Swing App, use the normal EJB method.
Is there a open source project uses this approach?Probably, checkout the list of Google links above.
Here is a sun tutorial, that introduces the principals.
http://java.sun.com/features/2002/03/whatdev.html
I don't want to use M$
Visual Basic anymore! Please, help me! Good for you :-)

I can not use my itunes on my iphone or ipad unless i am within range of wifi. why??

Please help
I run a PA company (Big sound systems) and at events i play music through the system using my ipad or iphone. this has never been a problem until recently. since i updated my OS on my iphone4 and ipad2 i open itunes like normal, select a song and it tells me i can not play the song because it is on my cloud and i am not connected to the internet. as far as i know i never took my music off my phone or ipad and when i plug them in it even tells me space is being taken up on my phone from all the audio stored on it, yet i can not play a single track without connecting to the internet through wifi.
if i had internet everywhere there wouldn't be a problem but thats just not possible. some of the event i do are in the middle of no where and i cant be without my music. Also i can not use my phone like a personal music player like anyone else would just walking around with earphones because as soon as i go out of wifi range i can not play anything from itunes.
why did it have to change in the first place,
please help.

does that mean I can not buy a movie or tv show from itunes and watch it on my car tv through my iphone? Does that also mean I can not watch any video even the ones I take via the iphone camera? That makes no sense, f that is true what is the rational? And how come it works from the IPOD?

Can not use, or open, a recovered project with extension .rcproject

Similar Messages

Maybe you are looking for