Can not use stored windows credential when running merge agent with agent proxy

I have an account ACCT_A and create a windows credential
CRED_B target to server DISTRIBUTOR_1 (with cmdkey).
And I setup a pull subscription to DISTRIBUTOR_1 and set merge agent run under agent proxy with credential of account
ACCT_A (The sql server agent is running as LocalSystem or Network Service). Then the merge agent job will failed and complain "Failed to connect to distributor
DISTRIBUTOR_1".
However if I change the sql server agent to run as ACCT_A and let merge agent job run as SQL Server Agent Service Account it will successfully connect to distributor
DISTRIBUTOR_1 with credential CRED_B, with other setting unchanged.
Here are the questions:
Is it possible to grant other accounts to access one's stored windows credential in Credential Manager?
I suppose merge agent job will get full security context of ACCT_A when it runs under agent proxy with credential of ACCT_A and should be able to access stored credential CRED_B and
successfully connect to DISTRIBUTOR_1. But nowCRED_B seems can not be accessed by merge agent. Could somebody explain what's the problem here?

Hello,
I am currently looking into this issue and will give you an update as soon as possible.
Thank you for your understanding and support.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

Similar Messages

I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please iPhone 4, iOS 7.0.3

I have the iPhone 4 recently became weak Wi-Fi where I can not use the Internet only when sitting Bejjani router, Can anyone help me in solving this problem please
iPhone 4, iOS 7.0.3

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

HT204053 I tried to buy some thing from APP. But it always show someone else apple ID. there fore I can not use my passward. And I can not use my Apple ID when I want to buy something from App. How can I fix it?

I tried to use my iphone to buy app. But it always showed difference apple ID. Not my apple. Therefore I can not buy app. I dont know how to fix it.

What id shows at the bottom of the Featured tab in the App Store app on your phone ? If it's not your id then tap on it and log out of it and you can then log in with your id.
If you have any apps or other content from the id that is currently showing then that content will be tied to that id e.g. only that account will be able to download updates to its apps and make in-app purchases in those apps

Please help - Can not use stored procedure with CTE and temp table in OLEDB source

Hi,
I am going to create a simple package. It has OLEDB source , a Derived transformation and a OLEDB Target database.
Now, for the OLEDB Source, I have a stored procedure with CTE and there are many temp tables inside it. When I give like EXEC <Procedure name> then I am getting the error like ''The metadata could not be determined because statement with CTE.......uses
temp table.
Please help me how to resolve this ?

you write to the temp tables that get created at the time the procedure runs I guess
Instead do it a staged approach, run Execute SQL to populate them, then pull the data using the source.
You must set retainsameconnection to TRUE to be able to use the temp tables
Arthur My Blog

Can not use chat window on ning sites?

I upgraded to Firefox 4 for Mac. I can no longer enter data in fields on e-junkie.com, my pay-for-download service. Also, I can no longer use the chat functions on any ning.com sites.
Thanks for any advice offered.
This will teach me to upgrade.

im having the same problem i cant write a comment on facebook or even write in the update status part or even send a msg to friends grrr

I have problem with my iphone 5 is screen flicker i can not use my i phone when will u fix it?, i have problem with my iphone 5 is screen flicker i can not use my i phone when will u fix it?

what can i do

Have you contacted your carrier to ensure cellular data is provisioned properly for your account and iPhone?

Can not use SVM disc mirror on Sun X2200 M2 with solaris u7

Last year,I tried to build cluster with solaris u6, but I got this error "Insufficient metadevice database replicas located" after SVM set up.
I tried lastest solaris 10 u7(09/05) with Sun x2200 M2 server again, but I got the same error.
I think it maybe driver's problem,so I tested solaris 10 u7 again with one old x86 machines and this machines has pure scsi card and scsi disc.
Also I tried it with ide drive, and everything is fine without any error message.
I checked that solaris 10 u5 will consider sata disc on x2200 m2 as ide disc, so SVM works fine.
But after I upgrade to solaris 10 u7,system will consider sata disc as scsi drive, and SVM will not work.
So I can see this is a bug of solaris 10 u7?
Edited by: cheung79 on 2009/7/3 ?? 11:04

-bash-3.00# metadb -i
flags first blk block count
a m p lu 16 8192 /dev/dsk/c0t0d0s7
a p l 8208 8192 /dev/dsk/c0t0d0s7
a p l 16400 8192 /dev/dsk/c0t0d0s7
M u 16 unknown /dev/dsk/c0t1d0s7
M u 8208 unknown /dev/dsk/c0t1d0s7
M u 16400 unknown /dev/dsk/c0t1d0s7
r - replica does not have device relocation information
o - replica active prior to last mddb configuration change
u - replica is up to date
l - locator for this replica was read successfully
c - replica's location was in /etc/lvm/mddb.cf
p - replica's location was patched in kernel
m - replica is master, this is replica selected as input
W - replica has device write errors
a - replica is active, commits are occurring to this replica
M - replica had problem with master blocks
D - replica had problem with data blocks
F - replica had format problems
S - replica is too small to hold current data base
R - replica had device read errors
I don't have "set md:mirrored_root_flag=1" line in /etc/system.
Do you mean boot device is scsi hdd? but it is sata hdd.
-bash-3.00# ls -l /dev/rdsk/c0t0d0s0
lrwxrwxrwx 1 root root 51 Jul 7 17:55 /dev/rdsk/c0t0d0s0 -> ../../devices/pci@0,0/pci108e,534b@5/disk@0,0:a,raw

Can I use the Window XP bundled with MS virtual PC in setting up boot camp?

Hi hi,
before having the new 24" iMac, I have MS office professional for Mac running on my 17" G5 iMac it. The bundle pack contains Window xp professional software running on Virtual pc program.
I want to install boot camp on my new intel mac but can i use the window xp program which is bundled with MS virtual pc software for setting up boot camp?
please advise.
iMac 24" Mac OS X (10.4.8)

Technically, so long as your bundled version is XP with service pack 2 then you should be able to use it.
Legally, no. When Windows comes with a PC, even a virtual PC, it's license is for an OEM installation. While it's still functionally the same as a copy you'd buy in the store its license is for use only with that PC it came with and no others.
Hope this helps! bill
1 GHz Powerbook G4 Mac OS X (10.4.7)

Bluetooth Headset Can Not Use on WindowsXP by Bootcamp.

I am using WindowsXP on Macbook Pro by Bootcamp.Now, the problem is that I can pair the bluetooth headset, but I can not use it. What can I do?Thanks.

Bluetooth Headset Can Not Use on Windows XP by Bootcamp.
Remove the last 2 words
Bluetooth Headset Can Not Use on Windows XP
I had one but gave it up, Windows XP can not handle it, Vista can.
There are some hacky ways to install a different BlueTooth stack (not the one from MS):
http://www.windowsdevcenter.com/pub/a/windows/2005/07/05/bluetooth.html
Its a general problem that you even run into with Dells.

Can not use the maps Otherwise iPad will switch off itself

As the question described in the topic, I now want to reinstall this app or delete it from the first page, but I can not a way to do that. Could anybody please tell me how to do it-delete the apps from the first page. When I long tap the apps icon in the first page there is no delete signs appear on the left upper corner but they do from the second page.

My problem is not about reset. I can not use maps app, everytime when I tap the maps, the machine will switch itself off, which means the white apple appears on the screen. Also, I can not search any location by google map. My hypothesis is to delete the maps app then install it again. However, I can not find a way to delete it, as you mentioned it was firmware I could not delete it at all. But I still wonder if anyone here can give constructive suggestions to fix the maps issue.

I can not use my mouse or keyboard when I am trying to install windows via boot camp

Please can you help!
I can not use my mouse or keyboard when I am trying to install windows via boot camp

Starting a couple of days ago my mouse and keyboard stopped working suddenly.
How are they connected? In my case they are wireless and their receiver is plugged into my USB hub. After an update I found the OS inexplicably not recognizing my USB hub and hence any devices which were plugged into it. My fix was to
plug the receiver into a different USB port (so I could use the mouse and keyboard; otherwise I would have had to use the OSK via Touch or pen.) Once I had normal access into my machine again I used Device Manager to remove all USB controller and
hubs (including hidden ones) and I then shut down, disconnected all USB devices and powered back up, this time using only Touch to get going. Once the OS had settled down I started plugging stuff back in the way that I wanted it to be recognized.
If I didn't have Touch I would have had to have left the wireless receiver plugged in both places which I assume would be OK. I have no idea why updates have such a catastrophic effect for USB devices.
Robert Aldwinckle

I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use

@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .

Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.

HT3986 I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 pro

I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem

i try to download now, do you think when i download and install the windows support software, can i fix the problem?

I downloaded the full Ultimate Christmas. I have a corrupt song. I have Windows XP so I can not use the iTunes Cloud. It says that is the only way to re-download songs now is via the Cloud. How do I get a uncorrupted version of my song?

I downloaded the full Ultimate Christmas. I have a corrupt song. I have Windows XP so I can not use the iTunes Cloud. It says that is the only way to re-download songs now is via the Cloud. How do I get a uncorrupted version of my song?
When I thing of the Thousands of dollars I have spent to get a 2000 song library and how Applle keeps screwing Windows users (no back-up of songs) I just think what a fool I was.

I did think about that and if I have to I will do that, however there are about 50 songs. I have closed and reopened iTunes several times and I am sure that I have the latest version. It fails right away but I can click on the cloud download icon and download the song that it failed on ... therefore it is not that song "or any one song" causing the issue. Any ideas?

Since I changed the operating system Windows 7 32bit to 64bit I can not use Firefox browser unless change the browser to safe mode.

Since I changed the operating system Windows 7 32bit to 64bit I can not use Firefox browser unless change the browser to safe mode.When i start it the browser is not open and appears a message
Mozilla Crash Reporter
== Crash ID(s) ==
20100611143157
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E; InfoPath.3)

the 20100611143157 is an update which won't instal automatically on my notebook

Can not use stored windows credential when running merge agent with agent proxy

Similar Messages

Maybe you are looking for