Can not work with BEx Web Analyzer correctly

Hi all,
When I go into the link of BEx web analyzer in portal, an error raised.
<b> URL used, 'http://<myhost>:<port>', is invalid;Distributed session management(DSM) cannot function. See sap notes 596698 and 654326.</b>
And I've seen the notes in SAP, and got the reason why this error happens, but exactly I just install NW2004s in my local PC and did not have any domain name.
What should I do about this case?
Helpful info will be awarded.
BR
Bob

Hi,
Try to set RSADMIN parameter ALLOW_MULTI_DP_RESET=X
This note may give you some insight on the issue.
1581923 - BEx Web: Optimization on Back with Many Data Providers
Regards,
Suman

Similar Messages

Can Coherence work with Spring Web Flow?

Can Coherence work with Spring Web Flow?
Is there any documentation on Coherence with Spring Web Flow

cpereira wrote:
Can Coherence work with Spring Web Flow?
Is there any documentation on Coherence with Spring Web FlowHi,
I do not know if there is direct integration between them out-of-the-box, but you can write an adapter which enables you to store conversation state directly in Coherence. You would need to implement Spring Web Flow's ConversationManager interface.
On the other hand, Spring Web Flow does have a ConversationManager (org.springframework.webflow.conversation.impl.SessionBindingConversationManager) putting conversations into the HTTP session, and Coherence has the Coherence*Web feature out-of-the-box, which allows storing HTTP sessions within Coherence, which should achieve the same purpose, although I am not sure how optimal that approach would be compared to the additional capabilities direct integration provides.
Best regards,
Robert

Mistakenly opened all the folders in my library of music and the Finder stopped working. Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing they reappear

mistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

mistakenly opened all the folders in my library of music and the Finder stopped working.
Now every time I restart the mac, all folders are reopened and can not work with the finder and tried killall-KILL Finder and nothing will reappear

Ear Sir: Yesterday on 18.09.2014 evening, I wanted to install IOS 8.0 according to your instructions iPhone 5S.during installation Stopped working and was closd, I can not work with him. Ibought it in the United States Apple Store Fifth 40venue 767 N

Dear Sir: Yesterday on 18.09.2014 evening, I wanted to install
IOS 8.0 according to your instructions iPhone 5S.during installation
Stopped working and was closd, I can not work with him. Ibought it in
the United States
Apple Store Fifth 40venue 767 New York NY1053
iPhone 5s Spase Gray 32 gb verizon.
Part Number: ME344ll / A.
Serial number: DN*******NjM.
Model A1533. I would like to request a new password for opening the
iPhone. Passwod..... Thank you very much,
Im not difficult for you to request a quick answer.Israel.
<Personal Information Edited By Host>

We are fellow users here on these forums, you're not talking to iTunes Support nor Apple - it looks like somebody has asked the hosts to remove your personal info from your post (it's not a good idea to post any personal info on any public forum).
What do you 'stopped working and was closed, I can not work with him' ? What exactly are you seeing on the phone's screen ?
If it's the activation screen and you can't remember your password for your account then see if you can get it reset via http://iforgot.apple.com

Portal can not work with abnormal increased /usr/sap/SID file space

hi experts,
I got a problem today on our HR portal.
At first I can't login the nwa, then I checked tha OS of portal, I saw that the file system /usr/sap/SID's used spaces increase very quickly, though I increase the free spaces for emergency use, the portal still can not work and the free space is still missing. I just solved by restart the SAP service.
Did anyone face the same problems before?
System information
OS --> AIX v5.3
Database --> Oracle 10.2.0.2
SAP --> netweaver 2004s SP12.

Hi,
This happens when your archive log file of the application increases,
Check the folder usr/sap/sid/instance/j2ee/cluster/server0/log/archive folder this is the reason for your disk space increase. Just take a backup and delete the files in the archive folder (except temp folder).
The deletion of older archive files is not handeled by SAP, you have to manually delete the archive logs.
Regards,
Vamshi.

PowerPoint presentations not working with Office Web Apps

Hi,
I have deployed Lync 2013 and Office Web Apps Server in order to share PowerPoint presentations. All te sharings are working fine (Desktop, Program, Whiteboard, Poll) but PowerPoint presentations.
I have re-installed Office Web Apps Server several times but it doesn't work:
Discovery URL is OK
Event IDs in Lync Server Event Viewer are OK
I have checked certificate and created it twice and that's not the problem (when tried to use a wrong certificate, the behaviour was different).
Tried aspnet_regiis but didn't worked.
Both Lync Server and Office Web Apps Server are updated.
Servers are Windows Server 2008 R2 SP1.
I have tested both Lync 2013 and Lync 2013 Basic clients but no one works.
When I share a PowerPoint, I can see it follows the whole way through LyncShare, Lync Server and Office Web Apps Server. PowerPoint files get to Office Web Apps Server (different name but I can move then to other workstation and check
they are the files shared).
Clients begin showing a "Loading..." but end showing "Network connectivity lost or server too busy" (after 90 seconds more or less).
If I get URL from Lync-UccApi-0:
https://wacserver.domain/m/Presenter.aspx?a=0&e=true&WopiSrc=https%3A%2F%2Flyncpool.domain%2FDataCollabWeb%2Fwopi%2Ffiles%2F11-1-90C848&access_token=AAMFEECCjUt7489YhSlhQY4GBWcGEIsJ8vG8JQH9w0g_TTTVe3aBEECCjUt7489YhSlhQY4GBWeCApwQgyBHjXVmSaUT70sAAlMNX4oAfTt5Nqgy5sJwqlLneNAxGYYIsFS5edC90AgIDURhdGFDb2xsYWJXZWI&<fs=FULLSCREEN&><rec=RECORDING&><thm=THEME_ID&><ui=UI_LLCC&><rs=DC_LLCC&>
If I put this URL in the browser, it turns black and shows "Loading..." and, after a long while, "PowerPoint Web App...", but it remains in this state (loading) without working.
In the Office Web Apps Server Event Viewer there are some errors related to other services I'm not using, as OneNote, or for Monitoring with the "PositiveDirect" and "NegativeDirect" tokens. Machine also answers it's
Unhealthy, but as I have read, this is not a problem.
In the ULS Logs I just see errors related to these events but logs for PowerPoint work fine. And IIS is answering with "200" (although there are a number of petitions that seem to be repeated:
2013-12-02 16:23:15 WACSERVER_IP GET /m/getdata.ashx s=a%3D0%26WopiSrc%3Dhttps%253a%252f%252flyncpool.domain%252fDataCollabWeb%252fwopi%252ffiles%252f11-1-90C848%26access_token%3DAAMFEECCjUt7489YhSlhQY4GBWcGEBpfUkNifoaqnZCEMbqB4haBEECCjUt7489YhSlhQY4GBWeCApwQgyCHF8jSo70Xws4SrDZyRP3zgH8FZLobf75sHXgxfCmyK4YIxsoPfNC90AgIDURhdGFDb2xsYWJXZWI%26rec%3Dfalse%26thm%3D1%26ui%3Des-ES%26rs%3Des-ES%26%3D&n=-1&r=1386001395077
443 - Client_IP Mozilla/4.0+(compatible;... 200 0 0 218
2013-12-02 16:23:15 WACSERVER_IP GET /m/getdata.ashx s=a%3D0%26WopiSrc%3Dhttps%253a%252f%252flyncpool.domain%252fDataCollabWeb%252fwopi%252ffiles%252f11-1-90C848%26access_token%3DAAMFEECCjUt7489YhSlhQY4GBWcGEBpfUkNifoaqnZCEMbqB4haBEECCjUt7489YhSlhQY4GBWeCApwQgyCHF8jSo70Xws4SrDZyRP3zgH8FZLobf75sHXgxfCmyK4YIxsoPfNC90AgIDURhdGFDb2xsYWJXZWI%26rec%3Dfalse%26thm%3D1%26ui%3Des-ES%26rs%3Des-ES%26%3D&n=-1&r=1386001396078
443 - Client_IP Mozilla/4.0+(compatible;... 200 0 0 203
2013-12-02 16:23:17 WACSERVER_IP GET /m/getdata.ashx s=a%3D0%26WopiSrc%3Dhttps%253a%252f%252flyncpool.domain%252fDataCollabWeb%252fwopi%252ffiles%252f11-1-90C848%26access_token%3DAAMFEECCjUt7489YhSlhQY4GBWcGEBpfUkNifoaqnZCEMbqB4haBEECCjUt7489YhSlhQY4GBWeCApwQgyCHF8jSo70Xws4SrDZyRP3zgH8FZLobf75sHXgxfCmyK4YIxsoPfNC90AgIDURhdGFDb2xsYWJXZWI%26rec%3Dfalse%26thm%3D1%26ui%3Des-ES%26rs%3Des-ES%26%3D&n=-1&r=1386001397093
443 - Client_IP Mozilla/4.0+(compatible;... 200 0 0 203
2013-12-02 16:23:18 WACSERVER_IP GET /m/getdata.ashx s=a%3D0%26WopiSrc%3Dhttps%253a%252f%252flyncpool.domain%252fDataCollabWeb%252fwopi%252ffiles%252f11-1-90C848%26access_token%3DAAMFEECCjUt7489YhSlhQY4GBWcGEBpfUkNifoaqnZCEMbqB4haBEECCjUt7489YhSlhQY4GBWeCApwQgyCHF8jSo70Xws4SrDZyRP3zgH8FZLobf75sHXgxfCmyK4YIxsoPfNC90AgIDURhdGFDb2xsYWJXZWI%26rec%3Dfalse%26thm%3D1%26ui%3Des-ES%26rs%3Des-ES%26%3D&n=-1&r=1386001398093
443 - Client_IP Mozilla/4.0+(compatible;... 200 0 0 218
2013-12-02 16:23:19 WACSERVER_IP GET /m/getdata.ashx s=a%3D0%26WopiSrc%3Dhttps%253a%252f%252flyncpool.domain%252fDataCollabWeb%252fwopi%252ffiles%252f11-1-90C848%26access_token%3DAAMFEECCjUt7489YhSlhQY4GBWcGEBpfUkNifoaqnZCEMbqB4haBEECCjUt7489YhSlhQY4GBWeCApwQgyCHF8jSo70Xws4SrDZyRP3zgH8FZLobf75sHXgxfCmyK4YIxsoPfNC90AgIDURhdGFDb2xsYWJXZWI%26rec%3Dfalse%26thm%3D1%26ui%3Des-ES%26rs%3Des-ES%26%3D&n=-1&r=1386001399078
443 - Client_IP Mozilla/4.0+(compatible;... 200 0 0 328
2013-12-02 16:23:20 WACSERVER_IP GET /m/getdata.ashx s=a%3D0%26WopiSrc%3Dhttps%253a%252f%252flyncpool.domain%252fDataCollabWeb%252fwopi%252ffiles%252f11-1-90C848%26access_token%3DAAMFEECCjUt7489YhSlhQY4GBWcGEBpfUkNifoaqnZCEMbqB4haBEECCjUt7489YhSlhQY4GBWeCApwQgyCHF8jSo70Xws4SrDZyRP3zgH8FZLobf75sHXgxfCmyK4YIxsoPfNC90AgIDURhdGFDb2xsYWJXZWI%26rec%3Dfalse%26thm%3D1%26ui%3Des-ES%26rs%3Des-ES%26%3D&n=-1&r=1386001400076
443 - Client_IP Mozilla/4.0+(compatible;... 200 0 0 234
2013-12-02 16:23:20 WACSERVER_IP GET /m/getdata.ashx s=a%3D0%26WopiSrc%3Dhttps%253a%252f%252flyncpool.domain%252fDataCollabWeb%252fwopi%252ffiles%252f11-1-90C848%26access_token%3DAAMFEECCjUt7489YhSlhQY4GBWcGEBpfUkNifoaqnZCEMbqB4haBEECCjUt7489YhSlhQY4GBWeCApwQgyCHF8jSo70Xws4SrDZyRP3zgH8FZLobf75sHXgxfCmyK4YIxsoPfNC90AgIDURhdGFDb2xsYWJXZWI%26rec%3Dfalse%26thm%3D1%26ui%3Des-ES%26rs%3Des-ES%26%3D&n=-1&r=1386001401076
443 - Client_IP Mozilla/4.0+(compatible;... 200 0 0 203
It seems that something is not working between the clients and Office Web Apps Server. There is not a firewall and machines see each other. Certificate is accepted.
I have tried so many thing but none of them worked.
Does anybody have an idea?
Thanks!

Hi Thamara,
There is a HLB but I thought of that and tested both: with HLB and pointing just a Front End, without HLB. In both cases, results were the same.
I can access the Front End pool web services from the WAC server using the IE.
I'm watching now this event:
<?xml version="1.0" encoding="utf-16"?>
<HealthReport xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<HealthMessage>BroadcastServicesWatchdog_Wfe reported status for BroadcastServices_Host in category '3'. Reported status: Contacting Participant.svc failed with an exception: The remote server returned an error: (404) Not Found.</HealthMessage>
</HealthReport>
Reading some posts, it's a known issue fixable by adding HTTP-Activation feature... in Windows 2012. I have a Windows 2008 and .NET Framework 4.5 is installed. I've tried to add HTTP-Activation feature from .NET Framework 3.5, but a number
of format errors appear. I don't know how I could fix it in Windows 2008.
In addition, as I'm making test for share PPT and they aren't finally showed, this error appears also:
<?xml version="1.0" encoding="utf-16"?>
<HealthReport xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<HealthMessage>PowerPointViewingServicesWatchdog_App reported status for PPTConversionService in category '0'. Reported status: AppManager: A request appears to be stuck in the queue. [State: ReadyToWork] [Start Time: 12/03/2013 10:35:07] [CorrelationId:
ec4db345-0e8c-477e-ac0e-71afcb9a8efd] [DocId: https%3A%2F%2FLYNCPOOL.DOMAIN%2FDataCollabWeb%2Fwopi%2Ffiles%2F1-1-2BCF63F] [ClusterId: 0] [RequestId: 51e9263e-fc78-46b0-93ca-de48272dd2bc] [Current InProgress Queue Length: 4]</HealthMessage>
</HealthReport>
It seems that PPTs are being queued as they aren't actually showed.
Does this give you any clue?
Thank you very much.
Kind regards.

Variable Screen Does Not Display in Bex Web Analyzer after first time

We recently upgraded from BW 3.1 to BW 7.0 (without upgrading specifically to 3.5). We are having a problem with our Web Bex Analyzer not showing the variable screen although the variable screen is displayed successfully when running the same query from the Bex Analyzer. Based on feedback from other posts regarding similar topics, we modified the 0analysis_pattern template to ensure that Display Variable Screen was checked on. We are finding that when we open the Web Bex Analyzer and do a New Analysis, the first query we try to run will always have the variable screen displayed successfully. Any susbsequent queries we try to run by clicking on New Analysis in that same open window will not show the variable screen and will start executing open ended. This is occurring regardless of whether the query has mandatory or optional variables and we have confirmed that there is no personalization set for the variables being used. We have tried it with several different queries and the results are consistent. The first query you run shows the variable screen successfully and any queries run after that do not. Any help in resolving this would be greatly appreciated as we have exhausted our resources researching and troubleshooting this problem.

We did open an OSS note and heard back from SAP. We made the recommended setting, see their response below, but as they stated, it will only show variable screens for queries that have at least one mandatory variable entry after the first query is opened.
Response from SAP:
Please check if the following setting is made within your template --
In the 'Standard Actions' of the Web Template, do you have the setting
'Action Before First Display' set to OPEN_VARIABLE_DIALOG
The behaviour of the variable screen is different if you use mandatory
variables and optional variables. If you have only optional variables,
the Display Variable does not force the variable screen.
Also, using the parameter VARIABLE_SCREEN=X only influences the
web application at STARTUP. This would not come into affect when you
use the 'New Analysis' button. This button resets the dataprovider so
this would not affect the variable screen and would not redisplay the
variable screen as you require.

Help,My vc2003 can not work with indesign debug version

Hello everyone, I am a new developer of Indesign plugin, recently I got the problem as follows:
I use vc2003 to open the SDK provided project, and click F5, then selected the Indesign as the programm to load this plug-in. However Indesign did not load the plugin and further more, non of the break-points I setted in the programm worked. It was very strange!
Any one can help me? Thank you very much!

Thank you very much for your reply!
I had solved the problem.
If you just put the plugin in the app's plugin folder, the VC2003 would be unable to work with your indesign.
In order to debug my plugin with VC2003 and indesign, I edit the file in %Documents and Settings%\%user%\Application Data\Adobe\InDesign\Version 4.0 which named PlugInConfig, copy the PlugInConfig.out and renamed it as PlugInConfig.txt and Dlelte the content then add the following lines:
=Path
"your custome plugin folder".
Problem solved!:)

Importing Raw images in Lightroom the image is vertical lines and can not work with it

Nikon 300S. It is set to NEF(RAW) + JPEG fine. When I import to Lightroom I get message "There was an error working with the photo? Does anyone know why or how to correct? And when I try to open it in Develop the image is a series of vertical lines with different colors.

I have a Nikon 300S. It is set to NEF(RAW) + JPEG fine. When I import to Lightroom I get message "There was an error working with the photo? Does anyone know why or how to correct?

Back button does not work with some web sites to return me back too Firefox main page after concluding business on site.

After connecting to a web site and completing tasks, I use back button too return too Firefox main page. After using back button to get back to the original site log in page the back button (after repeated uses) will never get me off the web page and back to the Firefox main page. At this point the only way too get back too Firefox main page is too shut down Firefox wait 60 seconds and restart Mozilla-Firefox.

Some web pages are coded to redirect you forward to another page. In that case, when you go back to the page, Firefox redirects you forward again.
To bypass this, use the history drop-down next to the back and forward buttons. The drop-down has the most recent pages on top, and older pages below. Jump as far down the list as you can, then repeat as needed to get back to the first page.
Does it work?

AME 6.0.2.18 can not work with mpeg2?

There are no mpeg2 presets for exporting as mpeg2 and importing throws an error.
Current version 6.0.2.18 64bit on MacOSX 10.8.4
I read about this problem on some boards more than one year ago. But I have the current version. Why this problem still exists?
I have CS6 and additional Premiere Elements 11; there I can import and export as mpeg2. So the codec seems to be there...

Have you tried downloading/installing the Latest iPod software ?

Using of Bex Web Analyzer as Adhoc query?

Hi,
can we use the Bex Web analyzer as a preferred tool for designing the Adhoc query?
Points willl be definitely assigned.

Hi Vasu,
You can create an appropriate ad hoc query to specify parameters for Web target iViews.
In logical SAP R/3 Systems of Release 4.6B or higher, transaction SPO0 contains an Ad hoc Query tab. This uses the concept of InfoSets, which are usually based on table joins or logical databases, to create abstract definitions for fields that the system can read. You have to enter parameters for the individual fields. The ad hoc query delivers values that can be passed to the portal.
Transaction SPO0 also contains a buffer for ad hoc queries. This improves system performance by avoiding the need to put together the query every time it is used.
You can delete the contents of this buffer by choosing Delete Buffer for AdHoc Query on the start screen of transaction SPO0. This removes the index entry and the generated queries from the system.
Hope this will help you.
Kind regards,
Praveen

WRT54GX4 not working with PDA device

I got problem with my WRT54GX4, it can not working with the PDA device, like the Windows Mobile and Nokia E61 cell phone. The computers are ok. I did upgrade the firmware to the newest 1.00.20 but it didn't help at all. Does anyone has same problem or know how to solve it?

You need to check from the PDA Device if it is showing any option for network connection or wireless connection ...
Search for wireless access point & try to connect to it ....

My print not work with hpeprint on iphone

My printer photosmart7520e work with air print but can not work with eprint
This question was solved.
View Solution.

Hi,
EPrint and AirPrint are two different things. Please try this:
http://itunes.apple.com/au/app/hp-eprint/id299531647?mt=8
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Characteristic attribute does not show correctly on BEx Web Analyzer

Hello everyone!
I'm working on a report in BEx Web Analyzer wich has the characteristic 0EMPLOYEE. When I call the context menu for this characteristic and select properties, I get a list of it's attributes. I select one of them for display.
The problem is, the value shown is not the correct one. It's an "old" value.
I change the employee's attribute in R/3 via PA30;
I succesfully update the change in BW (0EMPLOYEE master data);
The value shown is the previous one.
Is there any buffer between the BW system and a BEx Web Analyzer query wich I need to force-clear in order to see the correct data?
Best Regards,
Luís Andrade.

Thanks for your response!
It was a buffer issue. I solved it by simply refreshing the query with different selection conditions to force the system to read data from the BW system.
Best Regards,

Can not work with BEx Web Analyzer correctly

Similar Messages

Maybe you are looking for