Can NWDS 2.0 and 7.0 exist side by side?

Hi All,
We may have a requirement to do some java 1.5 programming which means we need nwds 7.0 but also need to maintain nwds 2.0 development environment. Can both be installed on the same client and can work be ongoing with both tools used seperately?
Thanks,
Doug

Hi,
You can have both exists side by side. While installing you need to specify different directory for each and create shortcuts from their respective eclipse folders.
Try to make use of different work spaces for each. Else the IDE may not respond.
Pl go through this blog
/people/helmut.tammen2/blog/2005/09/27/running-multiple-versions-of-netweaver-developer-studio-on-one-developer-pc--another-approach
Regards
Ayyapparaj

Similar Messages

Can I simply copy and paste an existing library file from XP to a Mac and then copy and paste the music files themselves? Of course, the music files will be in a different location...

Hello Gurus,
I have an aged XP machine with a large music library in ITunes. iTunes will not run any longer (tried uninstalling and reinstalling etc to no avail) but the music files are backed up onto an external drive so all safe. I have purchased a Mac which of course already has iTunes installed and I can copy the music files onto the Mac, but can I simply copy and paste the iTunes library files from the XP machine to the Mac so that all of the playlists, tags, ratings etc transfer, or do I have to start again?
Thanks for the advice.

Sounds like you have a split library. Ideally you would make this portable before attempting to move it to the Mac. See make a split library portable for details.
Perhaps you can get iTunes running on the old box long enough to sort things out...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
You will also want to deauthorize the XP system once everything is working properly on the Mac.
tt2

Can old compensation module and ECM co-exist in SAP

Hi All,
Do you know if old Compensation module and ECM can co-exist in an SAP instance. My client is on 4.7 and they have implemented one bonus plan using the old compensation module in the past but would like to configure additional comp plans using ECM (new functionality).
Please advise if it is possible as old comp uses info types such as 380 and new ECM uses new info types 758, 759, 761 etc.
Regards,
Sanjay

Thanks Donnie !
Actually, that is what I thought.
But, if they activate ECM now, then what will happen to the old award records (compensation adjustment records) that exist in info type 360 etc. for previous year comps. Any thoughts ?
If you have any documentation on this then please do send me the url.
Regards,
Sanjay Gera

Can Crystal Reports, Explorer, and Dashboards co-exist happily on the same server?

Hi All,
We are currently using BO 4.1 SP2. We have two servers: the main borep server that hosts the BI platform, and a second server that only has Explorer on it just now. We want to install CRE and Dashboards on the Explorer server (on our DEV infrastructure) so we can play around with those tools.
Are there any know issues with this approach?
Thanks everyone!!

Thanks Dell, very useful indeed!
Are you sure there is no server component to CR4E? There is a certainly a Crystal application available within BI Launchpad. When I launch it, it pops open a window prompting me to download a crystal for enterprise file with the extension BCPL. Browsing this forum, it seems that you get this message if you've not installed C4E on the borep server.
So I'm not sure what the inbuilt Crystal app is for - only for viewing but not designing reports within Launchpad?
Any ideas?
Thanks again!

Print Terms and conditions on Back side in Smart Forms

Hi All,
How can we print Terms and conditions on back side of last page. we are using SAP Smart Forms to print Packing Slips now we need to print the terms and conditions on back side of last page. who can we do this ... ?
I have created 2 pages first page and Last page i have selected last page as next page for First page and vice vis and selected duplex printing for first page print option.
Now the problem is the terms and conditions are printed on all the pages but not on the last page. for example if i have 5 pages then all the 4 pages are printed on front and back but the last page(5) is printed only on the front side but not on the back and if we print only 1 page then only front page is printed and no back side is printed.
please let me know what else need to be done in order to print the terms and conditions on the back side of last page.
Thanks,
Praveen Chindam.

Hi,
There is quite a simple solution. We have exactly the same requirements for our invoices.
Create 3 pages in the Smartforms, e.g. FRONT, BACK and LAST.
FRONT has print mode "D" (duplex) and next page "BACK"
BACK has print mode " " (unchanged) and next page "FRONT"
LAST has print mode " " (unchanged) and next page " " (blank)
BACK and LAST are identical apart from that, and do not have a MAIN window - they just contain the T&C in a secondary window.
At the very end of the MAIN window on the page FRONT, insert the command NEW PAGE <LAST>.
This will give you a print out that is
FRONT, BACK, FRONT, BACK,....FRONT, BACK, FRONT, LAST.

How can I remove my account on an iPad and add an existing one

how can I remove my account on an iPad and add an existing one

Or, how can I change the account on an existing iPad without restoring / formatting it?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck

I have just brought 2 mini's for my boys for xmas. 1. can I connect them both to my existing Itunes account or do I need to set up something different. and 2. can they be used on their dads account as well as mine, or only one?

I have just brought 2 mini's for my boys for xmas. 1. can I connect them both to my existing Itunes account or do I need to set up something different. and 2. can they be used on their dads account as well as mine, or only one?

You can set them up with your Apple ID if you want to. You can also set them up with their dad's Apple ID. Depending on how old the boys are, you can even let then have their own Apple ID's. The one thing that you don't want to do is have them use more than one Apple ID on their iPads.
If you want to be able to share purchased content, then setting them up with either your ID or your husband's (?) ID would be the way to go. If the boys share an ID with one of you, they can download content that you have already purchased without having to pay for it again.
If you and have the financial wherewithal to allow them to purchase their own individual content, I would recommend letting them have their own Apple ID. This way, as they grow older and eventually move on, they will have their own accounts, their own purchases .... No ties needed to your ID or to dad's ID. FaceTime and Messages will be a little easier to set up if they have their own ID's and they can have their own iCloud accounts as well. However, they must be 13 years old in order to have an Apple ID and iTunes account. If they are under 13, then it's a no brainer you will have to use yours or their father's ID.
Whatever you decide to do, just don't switch from one ID to another ID on the iPads. That gets confusing and they could end up locking themselves out of one of the ID's for 90 days if they download a past purchase using a different ID.

HT1351 Can you take the music off the existing library on the ipod and sync it to a new itunes library?? and if so how do you do this???

Can you take the music off the existing library on the ipod and sync it to a new itunes library?? and if so how do you do this???

See this excellent User Tip from another forum member turingtest2 on how to recover content from your iPod back into iTunes.
https://discussions.apple.com/docs/DOC-3991
B-rock

Can Actuate and BIP co-exist in a Siebel environment?

Just need to check how we can have both BI Publisher and Actuate co exist in our Siebel environment
thanks.

I doubt that both can co-exists as we have asked Oracle support about this before.
Thank you

How can I add Mail and Notes to my existing iCloud account?

How can I add Mail and Notes to my existing iCloud account?

YesI am using another kinfd of email - becuse calendar was working via ic;oud I hadn't created seperate icloud email.
Taken your suggestion and created email account and activated Notes too.
Just testing it out - seems to work
Many thanks

How can I get GV and HDV files imported to Premier Elements 13. I know now that they are not supported. But does it exist ways to get them. I use camera HDR-HS7E?

How can I get GV and HDV files imported to Premier Elements 13. I know now that they are not supported. But does it exist ways to get them. I use camera HDR-HS7E?

skjeggi
What is this HDR-HS7E - a miniDV camcorder that lets you do DV and HDV capture firewire?
True, the DV and HDV capture firewire into the Premiere Elements 13 Capture window is gone. But, have you
looked at the workaround suggested by PRE_help in this forum. The workaround is found in the following
Adobe document....
http://helpx.adobe.com/premiere-elements/kb/removed-features-formats-elements.html
When your schedule permits, please let us know if that worked for you.
Thank you.
ATR

Can Touch Events and Swipe Events exist in the same frame and/or movie?

After having fully tested a file with touch events I decided to add both a touch event and swipe event to a frame.
I started by importing the following statements:
Multitouch.inputMode = MultitouchInputMode.TOUCH_POINT;
Multitouch.inputMode = MultitouchInputMode.GESTURE;
I then added th appropriate code but only touch events worked. I fiddled so more and only the gesture events worked. So before I move any further, I'm wondering if I'm wasting my time trying to get them to work together.
So my questions are:
Can Touch Events and Swipe Events exist together in the same frame?
Can Touch Events and Swipe Events exist scene?
A reference to more information about this would be helpful, if you know of any.

I am aware of the latest releases of the components along with the plug-ins.
This note is applicable to your scenario but you might face some issues related to organization rule wizard, custom user group creation and EAM DB log collection, as mentioned at the bottom of the note. No matter on what SP level you are with GRCFND_A at 10.1, you would face these issues.
And so far, i don't think there is any more update from SAP on co-existence of plugins of 5.3 and 10.1
Ameet

In my iPad 3 iOS 6 the icons do not vibrate . How I can remove apps. And the ( lock access code ) not exist in setting / general

In my iPad 3 iOS 6 the icons do not vibrate . How I can remove apps. And the ( lock access code ) not exist in setting / general

Did you set any restriction?
Settings>General>Restriction

Can we addnew partition and sub partition in the existing table in one shor

can we addnew partition and sub partition in the existing table in one short

nav wrote:
can we addnew partition and sub partition in the existing table in one shortYes,
You can and below is the example for Range-List partition
ALTER TABLE <table_name>
   ADD PARTITION <partition_name> VALUES LESS THAN (<value>
      STORAGE (INITIAL 20K NEXT 20K) TABLESPACE <TS name> NOLOGGING
          SUBPARTITION Clause
          SUBPARTITION Clause
          SUBPARTITION Clause
          SUBPARTITION Clause
           );

Can NWDS 2.0 and 7.0 exist side by side?

Similar Messages

Maybe you are looking for