Can OAS 10gR2 and R3 coexist?

Hi,
Can OAS 10g R2 and R3 coexist on the same machine?
If so, are there any constraints?
Please share your views abt this.
Regards,
Sindhiya V.

Yes, make sure there's no port conflicts. eg RMI port, JMS port, etc.
-Frances

Similar Messages

OAS 10gR2 and e-Biz app tier on same server

I seem to have some sort of contention on my application server and I was wondering if anybody might have a suggestion on how to verify my setup or troubleshoot.
I have a Red Hat ES 4 32-bit server that is running an 11.5.10.2 e-Biz application tier. This install was done by our e-Biz dba who has since left the company.
I have since installed OAS 10gR2 for another application with the intent that we would share this server.
This has been done successfully on our Test server with no issues but the app tier is not being shutdown every night like it is in Production.
However I have had a couple of situations where after my e-Biz application was restarted over night it was found to not be working in the morning with this error:
'JSP error: Request URI:/OA_HTML/AppsLocalLogin.jsp'
I tired to stop/start the e-Biz app tier but no go. The fix was to stop my oracle OAS server and stop/start the 11i e-Biz applicaztion tier.
CLARIFICATION:
The port pool assigned on this server is 0 I guess (as it uses 8000) and that url always works (servername:8000), it is the E-Business Home Page that fails and generates that JSP error.
I don't think it is HW related but more of a configuration issue. I know I can check my ports assigned in OAS via $OH/install/portlist but I'm not sure how to check the 'port pool' assigned by e-Biz.
Just wondering what I should verify or double-check configuration wise. The e-Biz app stops/starts every night for backups and has worked in conjunction with the OAS for the past week until today. I likely do not need to shutdown the app tier every night for backups but that would just mask the underlying issue.
We use a different userid for the financials configuration versus the OAS config and each env uses it's own oraInventory and directory structure etc.
I was thinking of using netstat to see what ports are in use before and after restarts and look into the 'net.ipv4.ip_local_port_range = 1024 65000' value set in the /etc/sysctl.conf file.
Any other suggestions?
Edited by: user6445925 on Jan 5, 2010 12:03 PM
Added CLARIFICATION section.

My understanding with Financials is when you setup the app tier you pick a port pool (0 corresponds to port pool starting with 8000 etc. and port pool 4 would be 8004 etc.).
So in my case when I launch http://servername:8001 I get the Oracle Rapid Install Portal. So maybe that is port pool 1in my case (I'll research that).
If I pick 'Apps Logon Links' and then E-Business Home Page it takes me to http://servername:8001/OA_HTML/AppsLocalLogin.jsp which normally works.
It only fails sometimes and that seems to be in relation to my OAS install as it was added recently and shutting it down temporarily fixed the problem.
They are both running successfully again now.

Can the ATI and NVIDIA coexist?

Hi everyone,
I recently installed a new ATI Radeon 5770 into my 1st gen MacPro 2006. I moved the original Nvidia GeForce 7300GT into slot #3.
I installed Snow Leopard 6.0 into a new upgraded HDD to tests out the new OS X. My other HDDs are still running Tiger and Leopard.
The problem now is that when I plug my monitor into the DVI of the ATI card, I get a black monitor. When I plug the Monitor cord into the Nvidia's DVI output, I get my normal screen.
How can I get my new ATI working?
I planned on using my old Nividia card for my 2nd monitor since the ATI is not equipped with dual DVI outputs.
What am I missing?
Rio

Hi Grant,
I did notice the possibility of using adapters for the card to support multiple monitors but I don't want to spend more money byuing them. The ATI card already cost a small fortune. I also somewhat failed to notice that the ATI 5770 only supports 10.6.x and up. I have other HDDs running on Tiger and Leopard for testing and software issues. I think I will most likely return this card and opt to find an Nvidia GeForce 8800GT wich may solve all my "issues". We'll what happens.
Regardless, thanks for "chiming" in.
Rio

Can Snow Leopard and Leopard coexist on one machine?

I guess the question is does Snow Leopard update the firmware of exiting machines or is the firmware updated in the new machines so they cannot support Leopard or even Tiger to run on them?
Ideally I would like to install a second bootable hard drive with Leopard so we can run some apps that are not SL ready.
So, can I do that on a machine that already runs Snow Leopard?
Any ideas and suggestions are highly appreciated,
thanks,
NE

It all depends on the build date of the machine. It is unsupported to install any version of Mac OS X on any Mac older than the version it shipped with. So a Mac that came with Snow Leopard installed can't reliably made to run Leopard or Tiger. (It might work, but you will almost certainly encounter issues.)
Snow Leopard itself, however, does not update a machine's firmware when it is installed. Installing Snow Leopard on a machine does not preclude also running an older OS from time to time, as long as the machine was originally designed to run that OS at one point.
http://support.apple.com/kb/HT2186
Edit: Our posts crossed -- hope my reply was still helpful.

Can install APEX in OAS Forms and Reports Services?

Hi, I need to know: Can install APEX in OAS Forms & Reports?, thanks a lot....

Hi,
1. OAS Forms and Repors Services run on Oracle HTTP Server (OHS). You can use OHS to connect to Apex
2. Apex is not installed in the OS, its installed inthe Oracle Database. In other words, you install is by connecting to sqlplus as sys as sysdba
3. Install Apex in the instance that is holding the tables and views that are being used in the Oracle Forms/Reports.
Hope that answers.
Make sure you read the installation guide and follow it verbatim.
Regards,

URGENT!!! Can ATA and SCSI coexist?

hello fellas!
my case is similar of the post "Can SCSI and ATA coexist?', but with some differences:
I own a G4 Dual 500–MHz PowerPC G4, 40Gb ATA + 80GB ATA. (http://support.apple.com/specs/powermac/PowerMac_G4_GigabitEthernet.html)
now I've installed a PCI SCSI card to connect tree more SCSI HDs: two barracuda 18Gb and one quantum 36Gb)
my G4 only reads SCSI drives when I disconnect ATA tape from motherbard...
when I plug ATA to motherboard again, neither SCSI mount on desktop, nor system profile shows it as a device, even when I start Hard Drive Update 1.app...
I've read all manuals from apple, jumped all SCSI HDs, but for some reason, it doesn't work at all!
so, the question, again, is Can ATA and SCSI coexist?
does anyone knows how to config it??
thanks in advance!
b
G4 Dual 500–MHz PowerPC G4 Mac OS X (10.4.8) [email protected]

answering:
- as my primary language is portuguese, i didn't understand when you said 'booting off the OS X disk'. do you mean eject it in the disk utility?
- I have so many drives because e sold another G4 that used those drives atached with the pci card and I simply want to use it, because I'm short on cash... those drives are installed with OS 9.2 (the ATA ones are running OS 10.4.8)
when you said one ATA and 2 SCSI, you mean that if I simply disconnect the slave ATA and one of the SCSI it may works?
thanks again!
b

Can Quicktime X and 7 Pro coexist?

Can Quicktime X and 7 Pro coexist? Can you have both installed at the same time? I would guess not. Man I really had to bite my tongue on this post! Okay, just one word - hodgepodge.

Hold it right there. One issue I found that I is causing me fits right now is that even if you have both X and 7 Pro installed it still has some how corrupted some of my export settings in compressor. Specifically it appears that the FLV quicktime export component is now non-functioning and only produces .FLV's with a very bad flicker in them:
http://www.vimeo.com/6386852
password - flash
In addition and I guess on a tangent I would recommend to any pro editors to do the clean install that so many have suggested for both Snow Leopard and the New FCP Studio as I am already having round tripping issues in color, and have experienced some crashes within Final Cut 7.0
Now I want to make clear that these are my assumptions before some engineer jumps down my throat. It is entirely possible that these issues are solely mine own and are not common or widespread but from a quick review of these forums I am not sure that is the case. But having the issues I have experienced since upgrading both softwares I made the decision today to initiate a 7 pass erase of the HD and a totally new install to achieve the speed and functionality that keeps me sane and not homicidal.
From one Devoted FCP editor to any other that will listen.

Differences between oracle 10gr2 and 11gr2 warehouse bulider

Hi All,
Could you please let me know the main differences between Oracle 10gr2 and Oracle 11gR2 warehouse builder.
Also , it would be great if anyone point me to the document where i can see the major differences.
Thanks,
Naveen.

Hi Naveen,
The major difference between OWB10gR2 and 11gR2 is the target RDBMS.
In 10gR2 you have to use ORACLE as your target RDBMS (unless you are going for DB Gateways, that is a complete different story).
Where as in 11gR2 allows you to use any RDBMS as your target system . This is achieved by Code-Template mapping.
All is needed is that proper jdbc driver for the target system.
Also 11gR2 supports OBIEE RPD creation and etc.
http://blogs.oracle.com/warehousebuilder/2009/09/oracle_warehouse_builder_11gr2.html
http://www.rittmanmead.com/2009/09/a-look-at-the-new-features-in-owb11gr2/
http://www.oracle.com/technetwork/developer-tools/warehouse/owb-11gr2-new-features-summary-129693.pdf
Thanks,
Sutirtha

10gr2 and 11gr2

Hi,
I can to install both the version of Oracle DB 10GR2 and 11GR2 ?
Thank You
Gaetano

883279 wrote:
Hi every one..
I have very few knowledge on linux.
I have downloaded the two linux_11gR2_database_1of2 and linux_11gR2_database_2of2, and I have followed so many forums installation process
but somewhere my linux is getting crashed, each time I am deleting the vmware linux installed and re installing that...
Please let me know the steps as I am a biginner to install this.
Thanks in advance ....
:)Pl do not hijack another post as it is considered to be rude - pl create a new thread for your issue.
In order to get the help that you need, it is best to provide as much specific info as you can. What you have essentially stated is - "Help ! My car won't go ! How can I make my car go ?".
The more specific details you provide, the better the quality of the responses
HTH
Srini

OAS SEOne1012 and Portal question

Hi,
OAS 1012 documentation says that SEOne contains Instant Portal and also Portal.
I just downloaded and installed OAS 1012 SEOne from OTN and it seems like SEOne contains only Instant Portal.
Reviewing all the AS documentation I came in conclusion there is not clear distinction what SEOne exactly is and how to upgrade to the newest SEOne version.
So my question is:
I have license for OAS SEOne.
Can I download and install version 10.1.2.0.2 ?
I need to use these components:
Identity management = LDAP + SSO for my other instance of OAS (10.1.3), Instant Portal - nothing else
thanks,
Branislav

Hi Branislav ,
About the first part of your question, I think it is better to contact Oracle.
For the second part the only thing which I know with protal you will always need to have OID (LDAP) server.
Cheers,
Hamdy

Generate URL with oas,oapc and ti

Hi all,
I am trying to generate a url with oas oapc and ti and pass to javascript for navigating back to that page. When I don't give these parameters I Get the error as You are trying to access a page that is no longer active.- The referring page may have come from a previous session. Please select Home to proceed.
I used some function createURL or something to do this before. But now I totally just cant get this work.
Can someone pls help?
Thanks in advance.

Please update your exact requirement in the post.
What you need? Why you need?
don't mention "ti" parameter in the URL,
BTW, what value you are passing in this?
Are you aware of the importance of this parameter?
-Prince
[email protected]
http://princekapoor82.blogspot.com

How to autostart an OAS midtier and infrastructure???

Hi:
we do have OAS 10 and we need the oas server to estart on boot, but i only can do it with the data base of the infraestructure, and do not find the way to do whit the OPMNL services in both infra and midtier , Thakns

Which operating system are you using?
You can setup your services in a manner where they would startup automatically on reboot if you like. On Windows, you can do it using Administrative Services and configuring the startup_type for the OAS services. On unix or linux systems, you must have root authority to edit the inittab file.
Although, you may want to make a startup script and put it as a cron job for starting up everything in proper order.
AMN

Problems with a New installation on 10GR2 and HTMLDB 2.0

I'm trying to build a new HTMLDB server using 10GR2 on Suse Linux.
The database is fine, and I've pulled the HTTP server from the 10GR2 companion CD which I can connect to ok. I downloaded and installed HTMLDB 2.0 without errors.
Following the 2.0 post install docs, it talks about HTTP 9.0.3 and Oracle 10G Release 1 - nothing about 10G Release 2.
The 10G instructions says to modify the marvel.conf file - except I don't have one anywhere on the server.
Has anyone else managed to build a fresh install using 10Gr2 and HTMLDB 2.0 ? - it looks like something in the config has changed.
Dougie McGibbon

Had exactly the same problem and lot's of people will have it. Just posted the solution here, hope the devs will adjust the manual.
HTMLDB 2.0 Manual is faulty. Install on DB 10.2 and 10.2 Companion
Cheers

To see if you can have XP and Windows 7 on the same computer?

I am new to Forums so I don't know if I am in the right place to ask this question. Can you have the older XP and have Windows 7 programmed on to the same computer? This concerns using an older printer that requires XP.

Hello Joseph Hill.
This question should be asked in the
Windows Answers Forum.
Anyway, two Windows versions can coexist if you choose one of the following options
create a dual boot configuration: create 2 partitions on the hard disk, install Windows XP in the first one and Windows 7 in the second one; the Windows 7 boot loader will detect the Windows XP installation and configure the boot loader to display a menu
that will allow you to choose the Windows version you want to start. You can then install and configure your printer in Windows XP, but it won't be available for you to use it in Windows 7;
install only Windows 7 and create a virtual machine: you'll install Windows XP in the virtual machine and then install and configure your printer in Windows XP.
Bye.
Luigi Bruno
MCP, MCTS, MOS, MTA

Oracle 10gR2 and Forms 6i Combination

One of my company's division after suffering skill gap for many years decided finally to turn their system under my care. This means more work for me but it would be a welcome change since it will give back some exposure from my past life using SQLForms, CDE and Designer 2000 etc.
As a prerequisite I got involved to provide technical direction to a project to "modernize" their system with the "almost" current version that is still supported or "almost" supported by Oracle.
My question is this : ( In reference to Note 229929.1 Stating that Oracle 10GR2 and Form 6i combo is not supported as a combination ( because Form 6i is already desupported ) Is there anyone here have that combination running on production ?
Was there any problem ?
At the back of my mind I am very confident that I can make this combination work .
It would be useful if someone can confirm this combo. (ie 10gR2 and Forms 6i).
You may ask "Why not go with the latest ? ".This was for many reasons. I don't want to introduce shocking changes to the developers (they are already behind on technology and skillset), also Forms 6i is still Client-server which where they want to remain at the moment. The project was given a very short time to convert the system.
Introducing a new architecture will definitely introduce more task than these guys can handle in such short period.
Feedback for any real life experience on this combo is appreciated .
Thanks in advance.

Go to Community Discussion Forums » Developer Tools » Forms and post your question there.

Can OAS 10gR2 and R3 coexist?

Similar Messages

Maybe you are looking for