Can one change a color pdf to a grayscale document in OS 10.9?

I have a pdf color document, that I'd like to distribute as a grayscale document.
I can't seem to find how to do this in OS 10.9 with Preview 7.
Can anyone help?

This solved it for me
If you hold down the Option key while selecting the File menu, Duplicate will change to Save As…
Then you can use the quartz filter to grayscale again.

Similar Messages

How can one change the color of JToolTip background

how can one change the color of JToolTip background from Purple to user defined ? I am using setToolTipText() method to set the text required but here the background color of the ToolTip is Purple and i wish to change it to white.. how can i do it ?
i tried to change the color by defining a seperate class JToolTip but i don't know how to set it with a JButton..
can someone help..
thanks in advance ..
avinash

How can I change the text size and font?Give a man a fish.... Check out UIManager.

How can I change the color of birthday calendar?

The birthday calendar in the new iPhone OS gets it color automatically. How can I change the color? It does not correspond to the color in iCal on my Mac.

I figured out a solution for changing the other calendars but not the birthday calendar. Although it's not the most direct fix, it worked for me. Apparently Apple didn't think to give us the ability to choose the calendar color. I use Entourage and sync over the air. When I upgraded to iOS 4 my calendar turned bright red and the birthday calendar was blue. I don't use the birthday calendar so it isn't even enabled in my case. What finally worked was to go through the calendar colors one at a time by disabling and re-enabling the calendar in my mail account settings. I would double click the home button to quickly switch between settings and calendar to check the color each time I enabled the calendar. I had to do this 4 or 5 times to cycle through until blue came back up.

Can't change the color of a symbol I created

I am a beginner in illustrator, and I have been doing some online tutorials. I have run into a problem that I can't seem to find the answer to. I'm hoping you guys can help. I am doing a basic tree, I made a couple leaf symbols so that I could just easily duplicate the leaves. However, now I am going back and adding color and while some of the leaves I can change from black to green. Other leaves will not change color, they stay black to matter what I do. I am not sure what I am doing wrong or what I need to do to fix it. I am wondering if I did something wrong when I made the symbol. I am able to put a new color on the leaves that I made first. I made about 5 then I made a new symbol with the leaf a bit smaller and then another one with the leaf flipped. I think it is these leaves that I can't change the color on. Any help you can give will be greatly appreciated.

Are we talking about "real" symbols in Illustrators symbol panel?
How exactly do you try to change their color? You can't simply apply a color to a symbol instance, you need to either edit the symbol itself or expand the symbol instance (detach it from the symbol) or use the symbol-color-tool.

How can i change the color of the graph in agreement of the program's condition

Hi,
I am using labview 5.1 in my graduation's project final. (sorry by my english, but i am ina hurry)
How can i change the color of the graph in agreement of the program's condition?
I am developing a VI to control the temperature of termistors,but i have another sensor too.
In a graph i have the situation of the termistors,but i want to change the color of the graph when the sensor is active.
Thanks a lot
Rafael Wajnsztajn - Brasil

To change the color of the line itself, you can use the attribute Plot>>Plot Color.
To change the color of the points, you can use the attribute Cursor>>Cursor Color.
To select the color, you should have a color box constant inside the Numeric>>Additional Numeric Constants palette.
This is all in LV 7.0. I'm not sure how it similar it is in 5.1.
One important thing is to place the attribute node inside a case structure which will execute only when your condition has been filled.
If this didn't help you, I suggest you post the relevant piece of code, or at least an image of it (no BMPs, please).
Try to take over the world!

How can I change the color in this "pieces"

Hello guys, I'm new in the forum and I'm searching for help.
I'm using a free template that I downloaded from
the internet but I'm having a small problem.
When I put the logo that I want use in the template, the color is not the original one,
after some minutes trying to discover how I could change it to the original version of the logo, I found an option on "fill" with a color that I could change..
the problem is that when I change the color, all the logo changes in the same time, so I created 2 logos.. one of then only with the dark color and the other with the red color
so with this method I could change both colors on this "fill" option and all would be okai.
the problem is that both of the logos are changing in the same time.
I need to change the X to RED and the Moto to Black
Another problem that I have is : the little pieces of the logo that come all togheter, they are all black.. and i need to change it to the right color.
cause the text are in one color and the pieces are all black.

I did it, but i saw that Fill effect is a little "Shadow" behing the text... just for a small white line... I'm almost done with this intro, now I'm trying to find out how can I change the color from the X and MOTO
cause when I change the color, both changes, and this can't happen.
I need the X red and the Moto dark...
I made 2 compositions ... one with just the X X red.. and another with just Moto in dark color... but I don't know how to put this 2 compositions in 1 composition.

Array of clusters and in the cluster is a bar meter, how can I change the color individually?

Array of clusters and in the cluster is a bar meter, how can I change the color of the bar meter individually for each element of the array? I have just figured out that you can't change properties of one element of the array without all elements changing. For the scaling I had to make numeric indicators for each tick of the scale so that each bar meter in the clustered array would have individual scales. I also had to do some math to scale each barmeter to display correct proportions from 0 to 100%. Now I'm stumped on the color of the bar meter. Basically, if the value goes over a setpoint, the bar meter needs to turn red. It has to be in an array to be infinitely scalable.
Thanks
Matt
Solved!
Go to Solution.

You can't do that-
without a little trick.
You could consider laying a custom color box over the bar graph in the cluster you can set the color based on the value of the bar graph or even make a "Pseudo"- bar graph using a series of color boxes stacked to look lie a bar and changing values of the Color boxs from empty to full to red.
Here is an example to demonstrate
Jeff
Attachments:
Pseudo bar.vi ‏12 KB

How can I change the color of the font with the Property Inspector?

In Dreamweaver CS6, can one change the font color with the property inspector? How?
I don't know if I will automatically be notified when someone responds, and I don't want to be running back to this site every day to check. So if you have an answer for me, would you be kind enough to email me at [email protected]? Many thanks.

mike agranoff wrote:
A font color button was available in a previous version of Dreamweaver I had been using. But that version was incompatible with Windows 7, which is what my newer machine uses.
"Upgrade" and "improvement" are rarely synonymous.
Mike Agranoff
There is still a font color button in DW. In the Properties window, click the CSS button in the lower left when you have text selected. There is a little gray square with a tiny black arrow in the corner for font colors. It still uses css, but will muddy up your text with inline styles which isn't generally the best way to do things.
One of the biggest advantages to using css is the ability to put all of your styles in one external .css file. That allows you to make a single change, to a color setting for instance, and have that change affect your entire site (everything you put a given css class on). As it stands, using the old html font-color attribute, or inline css forces you to go through the code with a fine tooth comb and change each individual setting.
CSS is a massive upgrade and improvement over the old method.
I would definitely suggest getting familiar with css, it really is required for any kind of modern website and ends up making your life much much easier while using the CSS Designer window in DW (which is where a lot of this stuff takes place now in a Design View development approach)...
http://w3schools.com/css is a good place to start.

How can I change the color on the source?

I have a Dreamweaver 8 for Macintosh.
On Code window, how can I change the color on "option value="
from orange to perhaps red? It is hard for me to see the orange
fonts on the source.
Another one, how can I change the font size on the source?
(Not on the design window).

>>
how can I change the color on "option value=" from orange to
perhaps red?
>>
edit -> Preferences -> Category "Code Coloring". Now
select "HTML" from the "Document type" list and click the "edit
coloring scheme" button.
in the next dialog "edit coloring scheme for HTML" you can
either select "HTML form tags" from the "styles for" list or click
within the sample form displayed in the "Preview" below -- just use
the "Text color" color picker to switch the default "orange"
(#FF9900) value to red
>>
how can I change the font size on the source?
>>
edit -> Preferences -> Category "Fonts" :: select the
desired font from the "Code view" menu and change the font size
from the "Size" menu to the right

Can I change the color of my apps

Can I change the color my my apps

No, you cannot. They are set by the App developers and they are the only ones who can change any visual aspects of how the app looks on the Home Screen.

Can I change the color of my Apple icon on the lid of my laptop?

Can I change the color of my Apple icon on the lid of my laptop?

NightNinjaPDX wrote:
When I wanted to color my mac, I asked the apple genius, and he told me that when people do this there is a big risk that the "wet paint" could seep into the inside of the mac and cause internal damage, which apple care would not cover. He also explained to me that there was one case where a girl came in after having the same thing done that you want to do, and he computer acreen wouldnt not display anything because the paint leaked inside the mac and caused that damage. Basically she was out $2,000+ for her 17" MBP because she had it painted.
That Apple Genius is full of crap.
The paint is applied in a special electro static process to bond with the metal, like how appliances are painted. It's fogged on so light and with so many drying steps in between it can't run.
Also the cover is removed from the rest of the electronics and painted separately, not the whole machine.
Big feat for paint to "run" after it's been dry and baked.
Why it voids the warranty, the computer is disassembled.
http://www.colorware.com/c-52-macbook-pros.aspx

How can i change the color of the text on a button in Roll Over or Click state (Cs5.5)

Hello,
Here is the problematic:
1° How can i change the color of the text on a button in Roll Over or Click state (Cs5.5)
- I've many button in a doc im creating
- the color of the buttons is white with black stoke & black text
- in roll over state i want them to inverse the color coding (the text white & bottom black)
- currently the text becomes invisible as black on black cant be seen (ive stroked it white but that looks ugly)
- i would just like to know if there is a function made for this?
My other questions:
2° Ive a presentation on which Ive created buttons which tigger pop-up animations
- i have 5 buttons which trigger animations
- the viewer can chose to Click on any of the buttons randomly
- the problem is once the animation is open how can it be close... either:
a) by it self after "40" seconds
b) when ther viewer clicks another button
3° Ive created buttons linking pages..
- "go to page xxx"
- when i do a preview and click on the buttons the links dont take me to the right pages
- is that normal? (maybe in preview its suppose to be like that)
4° I would like to intergrate YouTube videos in the presentation so they play inside the docment.. when i tried.. it said the 'link isnt a flash video'
- what should i do?
5° Once i export it into Swf. how how can i visualize it? or put it online?
Thank you for your time.

stlbbl4u wrote:
Hello,
Here is the problematic:
1° How can i change the color of the text on a button in Roll Over or Click state (Cs5.5)
- I've many button in a doc im creating
- the color of the buttons is white with black stoke & black text
- in roll over state i want them to inverse the color coding (the text white & bottom black)
- currently the text becomes invisible as black on black cant be seen (ive stroked it white but that looks ugly)
- i would just like to know if there is a function made for this?
You should setup Object Styles - these can also include Paragarph Styles that can be triggered when the Style is selected.
http://help.adobe.com/en_US/indesign/cs/using/WS5CEDB81A-0011-4dc9-9DE8-AC7AD4C80076a.html
My other questions:
2° Ive a presentation on which Ive created buttons which tigger pop-up animations
- i have 5 buttons which trigger animations
- the viewer can chose to Click on any of the buttons randomly
- the problem is once the animation is open how can it be close... either:
a) by it self after "40" seconds
b) when ther viewer clicks another button
I'm not sure what you mean - I don't do files with Animations
3° Ive created buttons linking pages..- "go to page xxx"
- when i do a preview and click on the buttons the links dont take me to the right pages
- is that normal? (maybe in preview its suppose to be like that)
Does it work properly when you export it to the finished file?
4° I would like to intergrate YouTube videos in the presentation so they play inside the docment.. when i tried.. it said the 'link isnt a flash video'- what should i do?
InDesign won't link directly to youtube videos. I think your best bet would be to use Downloader to download the video and embed them directly in Indesign.
5° Once i export it into Swf. how how can i visualize it? or put it online?
Thank you for your time.
You can look up how to embed a SWF file into your HTML - but it depends what you mean by "online" there's a dozen ways to get a file "online".

In working on a simple home budget, how can I change the color of a negative number to red, during the period the number is negative. Thanks,

Using Numbers spreadsheet and In working on a simple home budget, how can I change the color of a number to RED when it comes up negative. (only during the time that it's negative) Thanks, ( I hope I did this right!!)

The Inspector offers choices of format for negative numbers when you choose Number of Currency as the format for a cell. Also offered when the format is set to Automatic, IF the selected cell(s) contain number(s).
The choices are in the pop-up menu beside the box for number of decimal places.
Regards,
Barry

How can i change backgroud color of global template in fusion cloud?

Hi all.
someone of you could help me?
How can i change backgroud color of global template in fusion cloud?

Hi.
Making CSS changes like this is currently only possible off-line, using the JDeveloper-like Skin Editor. This is described in our blog post here, a demo on our YouTube channel in this video, or the product documentation here. Coming soon is an online 'theme editor' feature which allows this kind of customization online. I would recommend that you raise a request with the Cloud Operations team to verify if they support the addition of custom skin files, otherwise you are limited to the online branding options currently available.
Kind regards
Richard
FA Developer Relations

How can I change the color of a box in book layout?

I am try to change the color of a photo box when making a book.
Will the box print? and if so how can I change the color
Thank you
Mark

The box will print... but there is no way to just assign a color to a box. The closest you can get is ot create a small solid colored image in Photoshop and assign that to the box. You may get a resolution warning but as long as it's a solid color it does not matter how few pixels you have.

Can one change a color pdf to a grayscale document in OS 10.9?

Similar Messages

Maybe you are looking for