Can one Cisco IPS 4360 connect to two different ISP circuits?

Hi,
Currently our network has two circuits from two different ISPs, with two firewalls in the middle of the ISPs and the corporation internal network. We are thinking of purchasing a Cisco IPS 4360 and put the device between the ISPs and the two firewalls.
We would like the traffic coming to/from ASA1 still use the circuit from ISP1, and ASA2 still use the circuit from ISP2. Is this possible? Can the 4360 route the traffic as we want?
I drew a draft picture of this issue. Please have a look at the attachment.
Thank you!
Regards,
Jacky

Hi,
Yes, You can deploy your IPS as your plan. Please see the below link.
http://www.cisco.com/c/en/us/solutions/enterprise/validated-design-program/networking_solutions_products_genericcontent0900aecd80601e22.html
Regards
Parosh

Similar Messages

Can one external drive be connected to two USB devices?

I am wondering if I can connect an external HDD to the AE USB port so its on the nextwork and also connect it via firewire or USB to an HD 1080 Media player (connect to TV). Or is this going to cause problems if I do this at the same time?
Thanks for any help!

Or is this going to cause problems if I do this at the same time?
Yes. A hard drive shouldn't be connected to two or more controllers at the same time unless it's specifically designed for that, which few drives are. A controller is a computer, AirPort Base Station, that media player, or anything else which attempts to access the drive directly.
(44045)

11g Multiple Rpd on one BI server connecting to two different data marts

Hi
Did anyone tried and successfully implemented multiple rpds on one bi server. I have similar requirement in one of the clients place.
1. Install OBIEE 11g with vertical scaling( reason client doesnt want to spend extra money on additional server licenses) and would like to utilize the powerful existing servers.
2. Install 2 rpds on One BI Server and connect to two different datamarts.
3. Create two PS and provide two links to have two different reporting environments.
Appreciate with any pointers. I am very clear on Vertical Scaling and bumping up the Bi , PS and Java Hosts components. I saw a post with successful implementation of the same functionility in 10g and nothing in 11g. I already reviewed ritmanmeed blogs but did not give a complete picture of successfull implementation.
Thanks

Hi,
Yes, it is possible to have two different .rpds on one BI Server but then you need to set up two different Presentation Servers.
Refer the below threads for more information.
Re: multiples RPD in one server
Re: Multiple RPD & Multiple Presentation service instance on single BI Server
https://forums.oracle.com/forums/thread.jspa?messageID=9189677&#9189677
Can i put two rpd files in nqsconfig init file in BI Admin
Hope this help's
Thanks
satya

Can one apple base be connected to another apple base station with ethernet?

Can one apple base be connected to another apple base station with ethernet?

Yes, it would be called a roaming network.
See the Roaming network here:
http://support.apple.com/kb/HT4260

Can one profit center be attached to two profit center groups?

Hi
Can one profit center be attached to two profit center groups? how ?
Regards
Rakesh

Hi
It is possible but that is only for reporting purposes.
To enable to do that you need to activate Enterprise Structure with Alternative Heirarchy.
You can have more info on this at the following link.
http://help.sap.com/saphelp_47x200/helpdata/en/eb/13811243c411d1896f0000e8322d00/frameset.htm
Regards,
Suraj

JDBC connection to two different machines from the same program

I want to use JDBC to connect to two different databases that are on two different MySQL installations on two different machines.
One of the installations is MySQL 4.1.12 and the other is 4.1.14-nt
For some reason, all my statements seem to be going only to one machine, even though I am very clearly set it up to go to two different machines.
Does anyone know whether connecting to two different installations from one program presents any unusual problems?
Thanks.

Unless there is some horrible defect in the MySQL JDBC driver (which I doubt!), there should be no problem and like the other poster says, please post snippits of your code so we can see what your doing...

One target table is loading from two different source but same columns but one source is in a database and other is in a flat file.

Hope you all are doing good.
I have a business issue to be implemented in ODI 11G. Here it is. I am trying to load a target table from two sources having same coulmn names. But one source is in file format and other is in Oracle Database.
This is what i think i will create two mappings in the same interface using Union between the sources. But i am not sure how the interface would connect to different logical architecture to connect to two different sources.
Thanks,
SM

You are on the right track, this can all be done in a single interface. Do the following
1) Pull your file data model into the source designer and and your target table model to the target pane.
2) Map all the relevant columns
3) In the source designer create a new dataset and choose the UNION join type (this will create a separate tab in the source designer pane)
4) Select the new dataset tab in the source designer pane and pull your source oracle table data model into the source designer. Map all the relevant columns to the target
5) Make sure that your staging location is defined on a relational technology i.e. in this case the target would be an ideal candidate as that is where ODI will stage the data from both file and oracle source and perform the UNION before loading to the target
If you want to look at some pretty screenshots showing the steps above take a look at http://odiexperts.com/11g-oracle-data-integrator-part-611g-union-minus-intersect/

One Cisco prime deployment for three physically different Networks

Can one Cisco prime deployment be used to manage three physically different Networks without creating a bridge between the networks. It is imperative that the networks remain separated but they will be managed by the same team so can you somehow use one Cisco Prime without the networks becoming connected

Hi,
I believe you can manage any device, if it reachable (ICMP/SNMP) to Prime Infrastructure.
Just make sure all the 3 different network reachable to PI, it's not required they're reachable among them.
PI itself do not do any bridging/routing between your 3 different network , therefore PI doesn't know if you can route between them or if they're separated.
Since 3 different network are not reachable among themselves, use 3 different seed ip while discovering.
Also, from management point of view, you can create virtual domain, group the devices network wise, & then while logging in PI, you'll the get feel if you're managing 3 different network by same PI.
But since we know that PI, all the devices of 3 different network, it'll consume the CPU/RAM/Disc space accordingly. therefore need to pay attention for the resources of PI
Using Virtual Domains to Control Access to Sites and Devices
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-0/administrator/guide/PIAdminBook/maint_user_access.html#pgfId-1056197
- Ashok
Please rate the post or mark as correct answer as it will help others looking for similar information

Connecting to two different SQLServers present on different Locations

Hi,
How can i connect to two different SQL Servers which are at different locations in the same session? IS there any way to do this without disconnecting from the first server?
cheers,
Sachin

Well,
actually my problem is that im reading Database
e Properties through a file which contains multiple
database entries. And i have only one Connection
Object so if im logged into one ex SQLServer in
London, I have a class which will allow me to loginto
another database SQL Server at New York. Now how do i
keep my connection as well as connect to New York
Database Server with the same Connection Object. If
possible, I need to logoff from the Server at London.
How do i do this? Any Ideas?Redesign. You have a connection object that can only have one connection. Either you have to close that connection and reconnect to the other one, or you need two of them. Those are your choices.

Double contacts as "iPhone"...my phone saves the same number twice, once with a 1 before the area code and one without it. It causes two different threads in my texts even of they're saved as the same contact

my phone saves the same number twice, once with a 1 before the area code and one without it. It causes two different threads in my texts even of they're saved as the same contact

My wife is having the same problems as a reciever. She works in a school as a teaching assistant and her teacher sends messages that are mixed with previous texts from ages ago.
Can anyone shed some light on this problem or is it only her and this poster?
2m42s

TS1398 I am unable to connect to two different wifi at different locations having same name but different passwords

I am unable to connect to two different wi if at different locations having same user name but different password one is at home other at work

I was able to do a full reset on the router (pushing the tiny button near the power input). Then ran through the setup process and it started working on my device.

Can I have smart print eprint on two different computes with only account

Can I have smart print eprint on two different computers with only one account???

Are you talking about accessing an ePrint account from various computers? Or having HP Smart Print on multiple computers?
ePrint account information is kept at the site. You can log on it from anywhere, from any computer. Just go to the sire and click on Sign in and enter your password and email address. You can have multiple printers on one user account at ePrint Center (EPC). But printers can only be registered on ePrint Center to one user account. If you have an ePrint cable printer you can create an account at this link here.
HP Smart Print does not require an account you can download to an Internet Explorere browser (versions 6-9) and use it with no registration.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes

I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes

Hi Gilly,
I have no proof, but I think it will not work with an adapter, only Mini Display Port or Thunderbolt.

HT1918 How do i change my username to another when they both have accts with itunes one is on my computer and one is on my ipad? Two different e-mail address that are both mine....so how do i make one acct for both?

How do i change my username to another when they both have accts with itunes one is on my computer and one is on my ipad? Two different e-mail address that are both mine....so how do i make one acct for both?

If you selected open a new Apple ID account, go back a step and enter use existing Apple ID.
You will have to set up a separate iCloud account or your iPads will mirror each other.

HT4528 Can I put the same information on two different i-phones with different numbers and different ID's?

Can I put the same information on two different i-phones with different numbers and different ID's?

Yes and no it really depends on what information you are putting on the devices.

Can one Cisco IPS 4360 connect to two different ISP circuits?

Similar Messages

Maybe you are looking for