Can one execute a "carrier rate shop" in SAP

I have done several searches within the documentation areas and cannot determine if one can execute a "carrier rate shop" within SAP (e.g. TP/VS, TM, LE). Am wondering if standard SAP has the ability to input a origin-destination pair (e.g. ZIP code, or address), input freight weight, choose mode of transportation (e.g. air, LTL, TL, etc.), and even choose any related accessorial - execute the inquiry, and be returned a suggested carrier and the freight cost associated with the shipment?   If such exists, where/how to access?

Hi John,
Sorry for the late response but I only just discovered your post.  SAP TM has a built-in integration to SMC3's RateWareXL for LTL rates.  Please let me know if you need a contact at SAP to assist you further and I'll try to find someone to get in touch with you.
Regards,
Phil

Similar Messages

  • Can i use my unlocked iphone overseas, with a one of their carriers?

    Can i use my unlocked iphone overseas, with a one of their carriers?
    If i go study abroad for 3 years, i obviously have to have a phone. Can i use my iphone 5s I bought in america unlocked, and just put their sim-card in
    Anyone know you can buy the iphone 6 unlocked?

    RichmondDan wrote:
    Apple is not yet selling the unlocked version of 6 or 6 Plus (I verified this today at the Apple store, in person).  Many say that some versions now sold are unlocked, but you pay your money and take your chances.  I prefer to wait.
    Oh, and if you are abroad for 3 years, you will have no warranty and no Apple service unless the phone is returned to the US.  Sounds like a good reason (to me) to buy it overseas.  YMMV
    This does, of course, depend on what country one is inhabiting.

  • Im from Philippines one of our carriers here supports 4G already on selected areas, Im currently in the area where this carrier has 4G now, I couldnt see my phone on 4G signal. Can anybody give me an idea, why?

    Im from Philippines one of our carriers here supports 4G already on selected areas, Im currently in the area where this carrier has 4G now, I couldnt see my phone on 4G signal. Can anybody give me an idea, why?

    Here's why:
    The iPhone 4S does not support 4G.  Only the iPhone 5 does (of Apple's iPhones).
    Here's an iPhone comparison chart:
    http://www.apple.com/iphone/compare-iphones/

  • Error when I am executing any method in shopping cart

    Dear All ,
    I am getting following error when I am executing any method in shopping cart.
    *"No data found for contact person 0000000244 . Inform system administration . "*
    Please Can you help me with this error .

    Your error states:
    !syParameterNotFound,dDocTitle
    Can you confirm that your profile includes all required data, specifically, the dDocTitle? Fix this issue, then re-check your logs. if there are other missing required parameters, fix each one.
    Eventually, you should have a successful check-in.
    Hope this helps,
    -ryan

  • How can I change the frame rate of a project in imovie 10?

    My problem is: I made a gopro movie with a frame rate of 50 fps. I imported it to imovie. So far so good.
    Scrubbing over the clip i found one single frame which looked amazing. So I draged some seconds of that clip into the timeline (the project if you will).
    The goal was to make a freeze frame out of this "spezial" frame.
    Unfortunately I could not find this frame in the timeline any more - it's gone.
    I think imovie dropped half of the frames to fit the clip into the projekt, which I assume is using 24-25fps.
    The only solution I found is to decrease the speed of the clip to let's say 50%.
    But is there a better way?
    Can I change the frame rate of the projekt somehow? I think it was possible in imovie 11.
    many thanks
    Rainer
    (from austria)

    iMovie 10 won't share at 50 fps and so for 25 fps output probably drops every other frame.  This is different from Imovie 9 which could handle 50 fps.  However, if you do 50% speed it will use all the available frames so that is indeed the way to find the frame you want.  After you have made a freeze frame I think you can switch the clip back to normal speed.  I am not aware of a better way in iMovie 10  By the way there is also no facility to export a still of a frame in iMovie.
    As a GoPro user I think FCP 10.1 would be the best choice.
    Geoff.

  • Can I execute a function module in my  Webdynpro App ?

    Hi,
    Can I execute a function module in my Webdynpro App ?  I mean, it's not a BAPI.
    Is it possible ?   which is the procedure to follow ?  (comparing to a bapi procedure).
    Thanks for your help !
    Regards from Mexico.  =)
    Diego

    Hi Diego,
    the warning icon indicates that you're using a function module that has not been externally released. If the corresponding function module has been defined by SAP, its interface might be changed in an incompatible way within one of the next releases, e.g. removing / renaming a parameter or structure field. Stability is only guaranteed for BAPIs or external released function modules.
    From the point of view of the model import it does not make any difference. If import does not work, there seems to be some other problem. Maybe the function module has not been activated in the R/3 system. Or check the log file or the import log page which will be the last page of the import wizard.
    You might want to import some other none external released function module in order to verify that model import of these kind of function module works.
    Kind regards,
    Lothar Bender

  • How can I execute a query from a BSP application?

    How can I execute a query from a BSP application?
    I´m trying to execute a Query from intranet. I´ve been looking for examples, but the templates I´ve found doesn´t help me.
    does anybody has an example?
    Thanks.

    Hi
    Have you designed the BSP application ?
    design it first with one page
    page will have layout and Event handlers
    Design the layout with the fields
    in the event handler there are events
    in the event On Initiailization or ON inputprocessing write the select query similar to what we write in routine ABAp and fetch the data into ITAB and that has to be passed to the Layout
    see the doc
    BSP
    To learn how to create Web applications with Business Server Pages, you can work through the simple tutorials that build on each other. You should be able to run through all of the steps described here in your own system.
    If you want to develop Web applications with BSPs, your system must meet the following requirements: Prerequisites for Creating Web Applications.
    The following tutorials are available:
    · First Tutorial: First Steps with Business Server Pages…
    · Second tutorial: A Small BSP Application and A Small BSP Application with HTMLB
    · Third tutorial: Our First Online Bookshop
    · Fourth tutorial: Further Developing the Bookshop
    · A small Tutorial is also available for your first steps with the Model View Controller design pattern.
    · For a more complex MVC tutorial based on the third tutorial, see: Our Little Online Bookshop Using MVC and HTMLB
    When creating BSP applications, note the browser dependencies described in Note 598860.
    steps:
    1) start the transaction RZ10.
    2) now u u have to select Profile name, so select the INSTANCE Profile from the list of options given with the Profile parameter list.U may find multiple instance profile in the list, so select the profile in which ur server name is given.
    3) u will also find three options in the same window.
    Administrator data, Basic Maintenance, and Extended Maintenance. So select the last one from that.
    4) Now click on change button.
    5) here u will find parameter icm/host_name_full, so now set it as FQDN.
    6) Now copy ur settings with new version number.
    7) Activate that version.
    8) And now please restart ur WAS.
    So this will set ur FQDN, and also don't forget to login using Admin User.
    Now u also check for following service are active in your ICF setting or not,( just start transaction code SICF)
    /default_host/sap/bc/bsp/sap
    /default_host/sap/bc/bsp/sap/system
    /default_host/sap/bc/bsp/sap/public/bc
    /def ault_host/sap/public/bc
    /default_host/sap/public/bc/ur
    /default_host/sap/public/bsp/sap/public
    /default_host/sap/public/bsp/sap/public/bc
    /defaul t_host/sap/public/bsp/sap/system
    /default_host/sap/public/bsp/sap/htmlb
    if not then activate all.
    check this link
    Read this weblog...
    /people/brian.mckellar/blog/2003/09/25/bsp-in-depth-fully-qualified-domain-names
    http://www.thespot4sap.com/articles/SAP_WAS_Creating_BSP_Apps.asp
    it consists of screen shots also
    Check it.
    http://help.sap.com/saphelp_nw04/helpdata/en/c8/101c3a1cf1c54be10000000a114084/frameset.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/e9/bb153aab4a0c0ee10000000a114084/frameset.htm
    Regards
    Anji

  • Which tablet/s can run executables created in LabVIEW 8.5?

    Background: I have created a VI that acquires data over bluetooth from a specific DAQ device. The VI is created in Windows 7 and LV 8.5. The VI is tested to work on the development machine. I'd like end users to be able to install and run an executable version of this VI from a tablet that has bluetooth capability.
    Question:  Which tablets can run executables created in LabVIEW 8.5? I think tablets running Windows 8.1, such as Surface Pro and Dell Venue Pro, should be okay but need a confirmation before I purchase one. Also, how about tablets that run other operating systems, such as Windows RT or Android?
    Extended Question: What tablets in the market can run LabVIEW 8.5 VIs (or in other words allow LabVIEW 8.5 to be installed)?
    Gurdas Singh
    PhD. Candidate | Civil Engineering | NCSU.edu

    Well since LabVIEW 8.5 isn't officially supported on Windows 7, or 8 you may have issues.
    http://digital.ni.com/public.nsf/allkb/B972242574D4BB99862575A7007520CB
    Of course many on the forums have stated being able to run older versions of LabVIEW on new operating systems without issue but know that from NI's perspective you should not be running LabVIEW 8.5 on Windows 7.  Which means no modern tablet.
    Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
    If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.

  • Compiling COBOLs in PSOVM - psrun.mak error - "cob64: can not execute Id".

    Hi All,
    After installing PeopleSoft OVM in our server, I need to recompile the COBOL. I believe this is not included in the OVM. These are the steps I did.
    1. Installed Microfocus Server Express 5.0 WrapPack 4
    2. Follow the steps in Compiling Cobol in Unix mentioned is the PeopleTools_8.50_Installation_Oracle guide.
    I was able to successfully compille the COBOL files by running ./pscbl.mak. The next step is Linking COBOL Components on UNIX by running ./psrun.mak and here I got the error:
    +./psrun.mak - linking PSRUN for oel-5-x86_64, Version 2.6.18-92.0.0.0.1.el5xen ...+
    +./psrun.mak - Error(s) encountered creating PSRUN!+
    +./psrun.mak - See /opt/oracle/psft/appbatch/tools/setup/psrun.err for messages+
    +[root@pshcm91ab setup]# more /opt/oracle/psft/appbatch/tools/setup/psrun.err+
    cob64: can not execute ld
    +[root@pshcm91ab setup]#+
    I followed all the steps in setting environment variable mention in the "Compiling Cobols in Unix" in PeopleTools_8.50_Installation_Oracle.
    Is there any specific documentation of compiling COBOLs in PeopleSoft OVM?
    Can anyone help me with this?
    Thanks in advance.
    -Chris
    Edited by: user9977167 on 4/02/2010 15:52
    Edited by: user9977167 on 5/02/2010 06:18

    Hi,
    Ok, I reproduce your case :
    [psadm1@psovmab setup]$ ./psrun.mak
    ./psrun.mak - linking PSRUN for oel-5-x86_64, Version 2.6.18-92.0.0.0.1.el5xen ...
    ./psrun.mak - Error(s) encountered creating PSRUN!
    ./psrun.mak - See /opt/oracle/psft/appbatch/tools/setup/psrun.err for messages
    [psadm1@psovmab setup]$ more /opt/oracle/psft/appbatch/tools/setup/psrun.err
    cob64: can not execute ld
    [psadm1@psovmab setup]$It looks like a lot of rpm packages required by ld are missing on Peoplesoft OVM App/Batch server compared to the Peoplesoft OVM database server for instance.
    I added a lot of packages because of the dependendcies as below :
    From OEL5.2 Disk 1
    ==================
    -rw-r--r-- 1 root root  899210 Feb  7 10:10 kernel-headers-2.6.18-92.el5.x86_64.rpm
    -rw-r--r-- 1 root root  3073639 Feb  7 10:25 binutils-2.17.50.0.6-6.el5.x86_64.rpm
    -rw-r--r-- 1 root root  3114462 Feb  7 10:29 cpp-4.1.2-42.el5.x86_64.rpm
    [root@psovmab rpm]# rpm -Uvh kernel-headers-2.6.18-92.el5.x86_64.rpm
    Preparing...                ########################################### [100%]
       1:kernel-headers         ########################################### [100%]
    [root@psovmab rpm]# rpm -Uvh binutils-2.17.50.0.6-6.el5.x86_64.rpm
    Preparing...                ########################################### [100%]
       1:binutils               ########################################### [100%]
    [root@psovmab rpm]# rpm -Uvh cpp-4.1.2-42.el5.x86_64.rpm
    Preparing...                ########################################### [100%]
       1:cpp                    ########################################### [100%]
    [root@psovmab rpm]#
    From OEL5.2 Disk 2
    ==================
    -rw-r--r-- 1 root root  614718 Feb  7 10:05 glibc-headers-2.5-24.x86_64.rpm
    -rw-r--r-- 1 root root 2535024 Feb  7 10:05 glibc-devel-2.5-24.x86_64.rpm
    -rw-r--r-- 1 root root 2105297 Feb  7 10:05 glibc-devel-2.5-24.i386.rpm
    -rw-r--r-- 1 root root 5544086 Feb  7 10:20 gcc-4.1.2-42.el5.x86_64.rpm
    -rw-r--r-- 1 root root 3987493 Feb  7 10:20 gcc-c++-4.1.2-42.el5.x86_64.rpm
    -rw-r--r-- 1 root root    83518 Feb  7 10:31 libgomp-4.1.2-42.el5.i386.rpm
    -rw-r--r-- 1 root root    84654 Feb  7 10:41 libgomp-4.1.2-42.el5.x86_64.rpm
    -rw-r--r-- 1 root root  2980440 Feb  7 10:43 libstdc++-devel-4.1.2-42.el5.x86_64.rpm
    -rw-r--r-- 1 root root    20483 Feb  7 11:46 elfutils-libelf-devel-0.125-3.el5.x86_64.rpm
    -rw-r--r-- 1 root root    58852 Feb  7 11:46 elfutils-libelf-devel-static-0.125-3.el5.x86_64.rpm
    -rw-r--r-- 1 root root   102193 Feb  7 11:49 elfutils-libs-0.125-3.el5.x86_64.rpm
    [root@psovmab rpm]# rpm -Uvh glibc-headers-2.5-24.x86_64.rpm
    Preparing...                ########################################### [100%]
       1:glibc-headers          ########################################### [100%]
    [root@psovmab rpm]#
    [root@psovmab rpm]# rpm -Uvh glibc-devel-2.5-24.x86_64.rpm
    Preparing...                ########################################### [100%]
       1:glibc-devel            ########################################### [100%]
    [root@psovmab rpm]#
    [root@psovmab rpm]# rpm -Uvh glibc-devel-2.5-24.i386.rpm
    Preparing...                ########################################### [100%]
       1:glibc-devel            ########################################### [100%]
    [root@psovmab rpm]# rpm -Uvh libgomp-4.1.2-42.el5.i386.rpm
    Preparing...                ########################################### [100%]
       1:libgomp                ########################################### [100%]
    [root@psovmab rpm]# rpm -Uvh libgomp-4.1.2-42.el5.x86_64.rpm
    Preparing...                ########################################### [100%]
       1:libgomp                ########################################### [100%]
    [root@psovmab rpm]# rpm -Uvh gcc-4.1.2-42.el5.x86_64.rpm
    Preparing...                ########################################### [100%]
       1:gcc                    ########################################### [100%]
    [root@psovmab rpm]# rpm -Uvh  libstdc++-devel-4.1.2-42.el5.x86_64.rpm
    Preparing...                ########################################### [100%]
       1:libstdc++-devel        ########################################### [100%]
    [root@psovmab rpm]#
    [root@psovmab rpm]# rpm -Uvh gcc-c++-4.1.2-42.el5.x86_64.rpm
    Preparing...                ########################################### [100%]
       1:gcc-c++                ########################################### [100%]
    [root@psovmab rpm]# rpm -Uvh elfutils-libs-0.125-3.el5.x86_64.rpm
    Preparing...                ########################################### [100%]
       1:elfutils-libs          ########################################### [100%]
    [root@psovmab rpm]# rpm -Uvh elfutils-libelf-devel-0.125-3.el5.x86_64.rpm elfutils-libelf-devel-static-0.125-3.el5.x86_64.rpm
    Preparing...                ########################################### [100%]
       1:elfutils-libelf-devel-s########################################### [ 50%]
       2:elfutils-libelf-devel  ########################################### [100%]
    [root@psovmab rpm]#
    From OEL5.2 Disk 3
    ==================
    -rw-r--r-- 1 root root  4588773 Feb  7 10:22 compat-gcc-34-3.4.6-4.x86_64.rpm
    -rw-r--r-- 1 root root 13542100 Feb  7 10:23 compat-gcc-34-c++-3.4.6-4.x86_64.rpm
    -rw-r--r-- 1 root root   232846 Feb  7 12:21 compat-libstdc++-33-3.2.3-61.x86_64.rpm
    [root@psovmab rpm]# rpm -Uvh compat-gcc-34-3.4.6-4.x86_64.rpm
    Preparing...                ########################################### [100%]
       1:compat-gcc-34          ########################################### [100%]
    [root@psovmab rpm]# rpm -Uvh compat-gcc-34-c++-3.4.6-4.x86_64.rpm
    Preparing...                ########################################### [100%]
       1:compat-gcc-34-c++      ########################################### [100%]
    [root@psovmab rpm]#The initial error is gone, but got a new one when linking :
    [psadm1@psovmab setup]$ ./psrun.mak
    ./psrun.mak - linking PSRUN for oel-5-x86_64, Version 2.6.18-92.0.0.0.1.el5xen ...
    ./psrun.mak - Error(s) encountered creating PSRUN!
    ./psrun.mak - See /opt/oracle/psft/appbatch/tools/setup/psrun.err for messages
    [psadm1@psovmab setup]$ more /opt/oracle/psft/appbatch/tools/setup/psrun.err
    ld: cannot find -lgcc
    [psadm1@psovmab setup]$I looked around for this error, found a Metalink note, but the suggestion does not apply here, the path directory metioned in $COBDIR/etc/cobopt already exists :
    [psadm1@psovmab setup]$ more $COBDIR/etc/cobopt
    -C nolist
    set GCC_LIB=/usr/lib/gcc/x86_64-redhat-linux/3.4.6
    [psadm1@psovmab setup]$ ls /usr/lib/gcc/x86_64-redhat-linux/3.4.6
    32          crtbeginS.o  crtend.o   include   libgcc_eh.a  libgcc_s_32.so  libstdc++.a   libstdc++_nonshared.a  libsupc++.a
    crtbegin.o  crtbeginT.o  crtendS.o  libgcc.a  libgcc_s.so  libgcov.a       libstdc++.so  libstdc++_shared.so    specs
    [psadm1@psovmab setup]$So far, no luck, I'll still try, but you may have more luck to install a separate server with all the packages install from the scratch and run a process scheduler from there.
    Nicolas.

  • Can we execute a query in resultset of while loop

    can we execute a query in resultset while loop
    for ex:
    rs=st.executeQuery("SQL");
    while(rs.next())
    rs1=st.executequery("SQL1");
    while(rs1.next())
    }

    yup no problem..if it doesn work declare the second one as st1

  • XmError: 7000 ODI XML Transformation That Can Be Executed Within a BPEL Pro

    Hi iam sudhakar
    iam using xml file as source and target and one csv file at the source through demo given in oracle site
    facing problem loading data in taget xml file
    source xml file contains
    client_id,
    address
    and othercolums
    csv file source contains
    client_id
    new_address
    row_id
    target xml(same as source) file is
    client_id
    address
    and othe rcolums
    iam just joining xml source and file as left outer join
    problem is unable recive the data from file to the target xml file and it not showing any errpors
    only xml data only storing in target xml file
    and
    set sql to sql
    sql to sql append
    filq to sql
    After that i have created variable the opened sql to sql append
    in detail tab
    ia have written create XMLFILE (NAME OF THE VARIABLE ) FROM SCHEMA geo
    Then I have created package
    i joined variable and interface then excuted
    In operator it showing errors
    Sunopsis.jdbx.xml....
    pls send the solution how to do
    ODI XML Transformation That Can Be Executed Within a BPEL Pro
    thanks
    user11366851

    I tried According to ur suggestion ,it is not working
    Actually Iam doing Second demos in oracle data integrator in oracle site
    http://www.oracle.com/technology/obe/fusion_middleware/odi/ODIxml_BPEL/ODIxml_BPEL.htm
    In this demo iam facing problem with coalesce function it is used in target data shore(address column)
    pls tell the steps from starting onwards.......
    thanks and regards
    user11366851

  • How can I execute method of Component for name

    Hello,
    My program has JInternalFrame with some components. Write me please - how can I execute method of Component for name of Component ?
    Like this:
    ... findObject("jTextArea1").cut();
    Thank you in advance.

    just cycle through the container's components until
    you find one where getName equals "jTextArea1"Thank you for your answer.
    I'm creating components in runtime (I add panel+JTextArea in JTabbedPane) and I don't know how many components will be in JTabbedPane.
    I know only it's names.
    I wan't to execute metod JTextaRea_n_.cut() via using JTextaRea_n_.Name.
    How ?

  • How can one invoke a WebLogic EJB from a BPEL Server hosted on OC4J?

    How can one invoke a WebLogic EJB from a BPEL Server hosted on OC4J?
    Reason I ask is I keep getting this error:
    javax.naming.NoInitialContextException: Cannot instantiate cla
    ss: weblogic.jndi.WLInitialContextFactory [Root exception is java.lang.ClassNotF
    oundException: weblogic.jndi.WLInitialContextFactory]
    Note: I am using <bpelx:exec> as a way to execute some java program.
    Essentially my java client (essentially an EJB client hosted on Oc4J) needs access to wlclient.jar since it needs access to weblogic.jndi.WLInitialContextFactory. I have a EJB client running on BPEL server hosted on Oc4J that needs to access some EJBs hosted on weblogic.
    Where do I place this wlclient.jar so that BPEL PM can start peacefully and at runtime discover the InitialContextFactory classes?
    Placing it in the j2ee/home/applib doesn't solve the problem. The server fails to start up if I do this
    I tried placing it in BPEL-INF\lib directory ...
    I still get the same exception...see below for exception dump
    I verified the BPEL suitcase, and it in fact does contain the jar file wlclient.jar
    integration\orabpel\domains\default\deploy contains the bpel_BPELProcess2_1.0.jar file and snapshot of that is as follows:
    <PRE>
    &#9474; bpel.xml
    &#9474; BPELProcess2.bpel
    &#9474; BPELProcess2.jpr
    &#9474; BPELProcess2.wsdl
    &#9474; bpel_BPELProcess2_1.0.jar
    &#9474; build.xml
    &#9474; buildxml.copy
    &#9474; graphics.xml
    &#9474;
    &#9500;&#9472;&#9472;&#9472;BPEL-INF
    &#9474; &#9492;&#9472;&#9472;&#9472;lib
    &#9474; myEJB.jar
    &#9474; wlclient.jar
    &#9474;
    &#9500;&#9472;&#9472;&#9472;META-INF
    &#9474; MANIFEST.MF
    &#9474;
    &#9492;&#9472;&#9472;&#9472;output
    bpel_BPELProcess2_1.0.jar
    </PRE>
    I tried using the BPEL-INF\jar directory...Is this something the obant automatically detects? or do I have to modify the build.xml? I created this directory and let Jdev deploy to local BPEL server->default domain handle it
    #####################3
    I even tried copying the wlclient.jar to
    integration\orabpel\system\classes but this doesn't help since the BPEL PM fails to start if I explode this jar into this directory.
    In short,where do I place the wlclient.jar so that this exception can be contained.
    I edited the build.xml to point to the jar, that too didn't work, unless I made some mistake in the file
    <bpelc classpath="${basedir}/BPEL-INF/classes;${home}/system/classes;${home}/lib/j2ee_1.3.01.jar;${basedir}/BPEL-INF/jar/wlclient.jar" input="${basedir}/bpel.xml" rev="${rev}" deploy="${deploy}" />
    </target>
    </project>
    DETAILS on ERROR
    I get the following error
    Process "BPELProcess2" (revision "1.0") successfully compiled.
    <2005-12-14 09:17:55,770> <INFO> <default.collaxa.cube.engine.deployment> Proces
    s "BPELProcess2" (revision "1.0") successfully loaded.
    05/12/14 09:18:36 weblogic.jndi.WLInitialContextFactory
    javax.naming.NoInitialContextException: Cannot instantiate cla
    ss: weblogic.jndi.WLInitialContextFactory [Root exception is java.lang.ClassNotF
    oundException: weblogic.jndi.WLInitialContextFactory]
    05/12/14 09:18:36 at javax.naming.spi.NamingManager.getInitialContext(Nami
    ngManager.java:652)
    05/12/14 09:18:36 at javax.naming.InitialContext.getDefaultInitCtx(Initial
    Context.java:243)
    05/12/14 09:18:36 at javax.naming.InitialContext.init(InitialContext.java:
    219)
    05/12/14 09:18:36 at javax.naming.InitialContext.<init>(InitialContext.jav
    a:195)
    05/12/14 09:18:36 at com.ejb.test.MapFinder.getDefaultMapName(Map
    Finder.java:37)
    ##################3
    with the bpelx all I have is two lines of code that creates a java object and calls a method on it.
    The method does this:
        private String initialContextFactory = "weblogic.jndi.WLInitialContextFactory";
        private String providerUrl = "t3://localhost:7001";
        private String urlPkgPrefixes = "";
        private String mapEjbJndiName = "ejb/mycompany/Redlands";
        public String getDefaultMapName() {
          try {
              Hashtable env = new Hashtable();
              env.put(Context.INITIAL_CONTEXT_FACTORY, getInitialContextFactory());
              env.put(Context.PROVIDER_URL, getProviderUrl());
              if (getUrlPkgPrefixes() != null && !getUrlPkgPrefixes().equals(""))
                  env.put(Context.URL_PKG_PREFIXES, getUrlPkgPrefixes());
              System.out.println("    " + getInitialContextFactory());
              System.out.println("    " + getProviderUrl());
              System.out.println("    " + getUrlPkgPrefixes());
              System.out.println("    " + getEjbName());
              // Get a naming context
              context = new InitialContext(env);
               Object ms  = context.lookup(getEjbName());
              MyEJBHome home = (MyEJBHome ) PortableRemoteObject.narrow(ms, MyEJBHome.class);
              myEjb = home.create();
              return myEjb.getDefaultName();
          } catch (RemoteException re){
              System.out.println(re.getCause().getMessage());
          catch (Exception ex) {
              ex.printStackTrace();
          return null; //if unable to resolve the context factory etc...
        }

    I did exactly as you suggested. I edited the application.xml and added this
    <library path="C:\ArcGIS\test\bea\wlclient.jar"/>
    I didn't add weblogic because the needed classes were all in wlclient.jar
    I also edited the BASE_OB_CLASSPATH to include this jar.
    Here is the result when I just start BPEL PM Server. Somehow BPEL PM doesn't like to have wlclient.jar in its classpath during startup.
    Failed to create "worker" bean; exception reported is: "javax.naming.NameNotFoun
    dException: remaining name: env
    at weblogic.j2eeclient.SimpleContext.lookup(SimpleContext.java:49)
    at weblogic.j2eeclient.SimpleContext.lookup(SimpleContext.java:57)
    at weblogic.j2eeclient.SimpleContext.lookup(SimpleContext.java:62)
    at javax.naming.InitialContext.lookup(InitialContext.java:347)
    at com.collaxa.cube.engine.ejb.impl.WorkerBean.ejbCreate(WorkerBean.java
    :49)
    at sun.reflect.GeneratedMethodAccessor2.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
    sorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at com.evermind.server.ejb.MessageDrivenHome.getInstance(MessageDrivenHo
    me.java:1235)
    at com.evermind.server.ejb.MessageDrivenHome$2.run(MessageDrivenHome.jav
    a:1150)
    at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(Relea
    sableResourcePooledExecutor.java:186)
    at java.lang.Thread.run(Thread.java:534)
    <2005-12-29 13:39:05,281> <ERROR> <collaxa> <ServerManager::loadAllDomains>
    ORABPEL START-UP ERROR!!!!!!!!
    OraBPEL run-time system failed to start due to exception:
    Could not initialize jms connection pool.
    Could not initialize connection pool for connection factory "java:comp/env/jms/
    ollaxa/BPELInvokerQueueFactory"; the reason is remaining name: env/jms/collaxa/
    PELInvokerQueueFactory.
    Note: So what I did was to removed the entry from application.xml and tried with just obsetenv.bat having the wlclient.jar added to it. This too failed!!
    Here is a snapshot of the error I got.
    Process "BPELProcess2" (revision "1.0") successfully compiled.
    <2005-12-29 13:53:11,207> <INFO> <default.collaxa.cube.engine.deployment> Proces
    s "BPELProcess2" (revision "1.0") successfully loaded.
    05/12/29 13:53:32 Cannot instantiate class: weblogic.jndi.WLInitialContextFactor
    y
    05/12/29 13:53:32 javax.naming.NoInitialContextException: Cannot instantiate cla
    ss: weblogic.jndi.WLInitialContextFactory [Root exception is java.lang.ClassNotF
    oundException: weblogic.jndi.WLInitialContextFactory]
    05/12/29 13:53:32 at javax.naming.spi.NamingManager.getInitialContext(Nami
    ngManager.java:652)
    05/12/29 13:53:32 at javax.naming.InitialContext.getDefaultInitCtx(Initial
    Context.java:243)
    05/12/29 13:53:32 at javax.naming.InitialContext.init(InitialContext.java:
    219)
    05/12/29 13:53:32 at javax.naming.InitialContext.<init>(InitialContext.jav
    a:195)
    05/12/29 13:53:32 at com.esri.adf.ejb.test.MapFinder.getDefaultMapName(Map
    Finder.java:57)
    05/12/29 13:53:32 at bpel.p0.ExecLetBxExe1.execute(ExecLetBxExe1.java:62)
    05/12/29 13:53:32 at com.collaxa.cube.engine.ext.wmp.BPELXExecWMP.__execut
    eStatements(BPELXExecWMP.java:49)
    05/12/29 13:53:32 at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perfo
    rm(BPELActivityWMP.java:185)
    05/12/29 13:53:32 at com.collaxa.cube.engine.CubeEngine.performActivity(Cu
    beEngine.java:3398)
    05/12/29 13:53:32 at com.collaxa.cube.engine.CubeEngine.handleWorkItem(Cub
    eEngine.java:1905)
    05/12/29 13:53:32 at com.collaxa.cube.engine.dispatch.message.instance.Per
    formMessageHandler.handleLocal(PerformMessageHandler.java:75)
    05/12/29 13:53:32 at com.collaxa.cube.engine.dispatch.DispatchHelper.handl
    eLocalMessage(DispatchHelper.java:100)
    05/12/29 13:53:32 at com.collaxa.cube.engine.dispatch.DispatchHelper.sendM

  • How can i execute trigger from procedure

    Hi
    How can i execute trigger when-button-pressed from procedure.
    I knew i have to get the button name and then execute the trigger When-button-pressed.
    but how can i do that.
    Thanks
    null

    how can i execute trigger
    such as When-Button-Pressed on item name "item1"
    and i have more than one trigger with this name on onther
    items
    i know Execute_Trigger('when-button-pressed');
    but any trigger
    for example :
    Execute_Trigger('Item1.when-button-pressed');
    or
    Execute_Trigger('Item2.when-button-pressed');
    or
    other syntax
    i dont know
    please help me
    my email : [email protected]
    Hani

  • BI Auth - user still can search & execute for not authorized query

    Hello All,
    need your help here.
    For BI security,
    I've configured menu role (for example ZBEX_FIN) in order for the end users to see only specific queries/workbook inside the menu folder that assigned to him/her.
    And I've made a function role for end user, copy from the template S_RS_RREPU with the modification:
    1. I delete 0BI_ALL
    2. add S_USER_AGR and put my menu role above (ZBEX_FIN) for field ACT_GROUP
    3. add S_RS_FOLD to disable the infoarea button in BEx.
    currently the user can see and execute report assigned in the role menu folder, this is correct.
    But the problem is there's a find button in the BEx, when the user try to search other query (non authorized query,the one that supposed he can't see), he still can display the query, then can execute the query. This is not acceptable.
    Anyone can suggest whether I can disable the find button in the BEx
    or any other restriction in the role that I missed, so the user can only execute and display the query/workbook under the role menu only.
    Thanks in advance.

    So it means that we need to do it twice restrictring the query in the role menu and then inside the S_RS_COMP ?
    so later when the user wants to add more queries in his role, we need to add those in the role menu as well inside the S_RS_COMP. is this correct ?
    When you add queries/workbook to role menu, you are not restricting the access. Its just that user menu would list those queries/workbooks. Users can search for other queries and workbook and run them with proper authorizations in S_RS_COMP. You may consider maintaining query naming convention with wild cards for example YRZ* etc to give access to all queries/workbooks starting with YRZ. This would save your effort to update role too freqeuntly.
    And if I have a workbook, how I put it inside the S_RS_COMP ? because the component of S_RS_COMP is query only.
    S_RS_COMP can restrict queries as well as workbooks with field RSZCOMPTP= REP

Maybe you are looking for