Can one monitor audio off the eos 70d?

I'm considerng the EOS 70D for some still and video work. Can one monitor audio off the EOS 70D while recording video?
thanks.
chuckcox
Solved!
Go to Solution.

Hi chuckcox!
Thanks for posting.
There is not a port on the EOS 70D that allows headphones to be connected for monitoring audio. However, the camera does have an HDMI port, which carries an audio signal. You can send the HDMI signal to an external monitor that does allow you to connect headphones and monitor the audio.
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Similar Messages

Canon Battery Grip BG-E14 with the EOS 70D

Recently purchased the Canon BG-E14 battery grip to replace a third party battery grip for my new EOS 70D. The reason for replacing the third party grip with the more expensive Canon grip was a problem with using AA batteries with the third party product. At the time, I thought the reason the AA batteries were not working was because the grip was not a Canon product.
Turns out the Canon BG-E14 battery grip also does not work with AA batteries, but I not sure now if it's the grip or the camera causing the issue. I need to use AA batteries because of camping for long periods of time (no access to electricity) in remote areas. The battery indicator will show “Full” for about five minutes, then quickly go down to empty. The camera will shut down after about 6 minutes and if you keep turning the camera back on then you can continue shooting a few more pictures. I have use other Canon battery grips in the past with AA batteries with no issues, so again maybe the issue is with the new EOS 70D.
Does anyone have any knowledge on what could cause this issue of the AA batteries not working with the EOS 70D battery grip BG-E14? AND how is Canon fixing this issue (since this is an expensive Canon product that is not working as designed)?
Thanks,

Canon's rechargeables are Lithium Ion batteries. If you were to plot a graph of the power output from the battery as it is drained, you'd find that it provides a fairly steady voltage and then only drops at the very end when the battery is basically dead.
Non-rechargeable alkaline batteries don't behave like this. The voltage slowly drops as the battery drains and this may be fooling the camera into thinking it's got a dead battery (because the voltage doesn't normally drop on rechargeables until the very end.)
I use Sanyo Eneloop rechargeables and, if you're planning to take a huge pile of AA batteries camping, then I'd highly suggest that you specifically get the Eneloop brand. The Eneloops are "low self discharge". Most rechargeable batteries loose an astonishing amount of their charge within just 24 hours of being charged up -- simply through "self discharge". Eneloops are designed to not self-discharge. Sanyo claims that a charged Eneloops will still hold 90% of it's charge even after sitting on a shelf for 1 year after being charged.
I use Eneloops in all my speedlites. I normally just use the Canon batteries in my 5D III battery grip... but I through 6 Eneloops into the AA battery tray just as a test. I'll let you know how long it lasts (so far I've shot dozens of shots in the last 10 minutes and the battery power indicator still shows full as I would expect).
One other question... is the WiFi enabled on your 70D?
Tim Campbell
5D II, 5D III, 60Da

I have a G4 Quicksilver that no longer works, but the hd may still be good. How can I get files off the G4 hd and onto my new iMac?

I have a G4 Quicksilver 2001 that no longer works, but the hd may still be good. How can I get files off the G4 hd and onto my new late 2013 iMac?

Also, how do I boot the G4 into FireWire Target Disk mode?
First, the G4 must be able to start to use FWTDM. If it can start, hold the t key at boot until you get a "screensaver pattern" that looks like this:
If the G4 is attached via a FireWire cable to a newer Mac with a FireWire port, the G4's hard drive will appear on the other Mac's desktop just as if it were any external drive. A USB cable won't work for FWTDM.
Just wondering if the drive in my G4, which I believe may be an ATA drive will also work in an enclosure for a SATA drive?
No. ATA (actually "PATA" or "IDE") and SATA are different interfaces. PATA external enclosures are now very hard to find. You best and least expensive option is the adaptor that BDAqua linked. One of its connectors is for PATA drives.

How can you delete songs off the ipod without deleting songs off your itunes library?

How can you delete songs off the ipod without deleting songs off your itunes library? My son's ipod automatically synced all the songs in my library to his ipod which he now wants to get rid of. Is there a way to delete them all without me having to erase my library?

Do not select the songs to sync, then sync.

My iPad is stuck with a small blue screen saying iCloud Backup, this iPad hasn't been backed up in 4 weeks.Backups blah blah- Click OK. I can't get it off the screen and I can't use the iPad because of it. Can anyone out there help?

my iPad is stuck with a small blue screen saying iCloud Backup, this iPad hasn't been backed up in 4 weeks.Backups blah blah… Click OK. I can't get it off the screen and I can't use the iPad because of it. Can anyone out there help?

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

When starting Firefox 4 I get an error message. After clicking OK it nevertheless runs. How can I get rid off the error message.

When starting up Firefox 4 I get an error message. After clicking OK it nevertheless runs. How can I get rid off the error message?
The error message is: what happened: Type Error: Components. classes ['@mozilla.org/extensions/manager;1'] is undefined.
It appears all the time already from the beginning after installing Firefox 4.

Thanks a lot. The Ask toolbar created this problem. Another problem is: When searching on the web via Google, normally it is possible to type a few letters and then look what appears and then click on the wanted word(s). A number of word(s) ineed do appear, however it is not possible to select any of them as ws possible as mentioned in olders versions.

How Can One Run Only In The System Administrator ( ie root ) ?

Upon creating a System Administrator ( ie root ) in Command + R , of course after Clean Installing OS X ML with my own specific Apple Verified Account ,
i have the Log In screen from a startup , either Safe Boot or a Boot , and i have my own specifc Apple Verified Account , plus the Other... ,
which the Other... of course is the System Administrator ( ie root ) .
How Can One Run Only In The System Administrator ( ie root ) ?
Is there a way in Terminal with sudo su to make it work ?
Shall i just always log in with Other... System Administrator ( ie root ) , and just forget the my own specific Apple Verified Account ?

As of EHP3, you could still install some EHP components. On an ERP 6.00, you could just push SAP_APP to 6.03 and move on. Now if you want another component in your system with an EHP4 version, you can't have some components at EHP3 and some at EHP4. You would install EHP4 for the new component you desire updated and part of the work will be to also update SAP_APP to 6.04.
EHP4 is an UPGRADE process, with shadow instance & all the joy of an upgrade process. You can either run ressource minimized or downtime minimized. In resource minimized, the shadow instance runs on the same server as the main instance. Downtime minimized allow to run the shadow instance on a separate / new server. Anyway you go, you will always have a "Downtime Phase" when you bring back the updated components from the shadow instance toward the real production one.
As with any UPGRADE project, the benefits of installing EHP4 for your business has to weighted against the downtime cost.
Our tests so far on small systems (few data, few users, 120GB database) show ~3 days process from EHP3 to EHP4 (all components) with a downtime phase of about 22 hours using the "resource minimized" path, i.e. shadow & main instance on the same server (4 CPUs, 16GB RAM). Until you give a try at your Sandbox or DEV systems, you won't have realistic figures for your environment.
Good luck!

I accidentally hit the install software update on my IPad and I am not by my computer and won't be for 2 weeks. Is there any way I can get my IPad off the picture of connecting to ITunes?

I accidentally hit the install software update on my IPad and I am not by my computer and won't be for 2 weeks. Is there any way I can get my IPad off the picture of connecting to ITunes?

No. You must connect your iPad to a computer (it does not have to be yours) in order to restore it to factory settings.
Once you're home, you can restore it from a backup.
Any content that you did not backup has been lost.
~Lyssa

Can you turn shuffle off the ipod shuffle 4th gen?

can you turn shuffle off the ipod shuffle 4th gen?

Mellerris123 wrote:
can you turn shuffle off the ipod shuffle 4th gen?
Yes.
Power switch.
1st notch is Off.
2nd notch is play in order.
3rd notch is play shuffled.

I can not record audio with the internal microphone or a external microphone? What is the fix?

I can not record audio with the internal microphone or a external microphone? What is the fix?

jw000.w wrote:
I do appologize and appreciate it! Im and running OS X
Please click on the following link & do the necessary in providing the info previously requested.
http://support.apple.com/kb/HT1758 How to identify iMac models
Click on the Apple>About This Computer. The window will tell you which version OS is currently installed on your iMac.
=========================
It would help us to know which computer model you have, which OS you're using, how much RAM, etc. You can have this info displayed on the bottom of every post by completing your system profile and filling in the information asked for.This will help in providing you with the proper and/or correct solutions.
Thank You.

Can one Recordset created in the Main/Parent form be used in more than one Subform?

Hi
Can one Recordset created in the Parent form be used in more than one Subform? The parent and subforms are unbound.
If so, how do I do this?
Many thanks for your help!
smsemail

You can declare a public object variable in the parent form's module's Declarations area:
    Public rs As DAO.Recordset
Then, anywhere in the parent form's module:
    Dim strSQL As String
    strSQL= "SELECT etc"
    Set rs = CurrentDb.OpenRecordset(strSQL)
In a subform's module, or anywhere else for that matter while the form is open, you can return a reference to the recordset as a property of the class:
    Form_YourParentFormName.rs
Ken Sheridan, Stafford, England

After installing ios7, my ipad buttons stopped working, I can't even turn off the ipad. Please help me. I don't know what to do.

After installing ios7, my ipad buttons stopped working, I can't even turn off the ipad. Please help me. I don't know what to do.

Try to reset the device:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the
Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot
normally.

Can one tell me if the games for iPod with Click Wheel with the 6G iPod compatible?

Can one tell me if the games for iPod with Click Wheel with the 6G iPod compatible?

No, the clickwheel games are for certain clickwheel only generations. There are no games for the nano 6 (yet)!

Can one copy Audio from one clip minus its video...to paste to another?

I'm working on a painting video...as an artist/teacher...and easily created a 3 minute trailer on YouTube using iMovie...
http://www.youtube.com/watch?v=8LXWxjjGkAg
I have Final Cut Express 3.5.1 on my intel...and thought I'd best use this higher standard software for the making of my 90 minute DVD...but dang, its coming hard for me. Trying to make sense of the help manual. With iMovie it was nothing to copy an audio track, copy and paste elsewhere...but with FCE I can't seem to separate the audio of the track from one clip to copy and paste elsewhere without that video clip wanting to come along.
The original clip is me painting by a waterfalls..the original narrative voicing was weak, so I did a voice over with a mic and toneport tonight, now I want to paste in the sound of the falls behind copied from a clip where I did no speaking.
I have Soundtrack as well. Am I better off just putting my video clips together in FCE...then importing the whole thing to Soundtrack to edio audio? Seems audio with FCE is tough...well, for me anyway. Thanks

Hi -
In FCE, select the clip on the timeline that has the audio and video stuck together. Go to the menu Edit and toggle Linked Selection (the check mark will go away).
Now you should be able to copy and paste one without the other.
Hope this helps.
MtD

Kids are using the WiFi all night long and not sleeping... How can I temporarily turn off the WiFi at night using the Airport Extream or Airport Utility? I must keep the guest network up as I have a tenant in an apartment over my garage using that.

My kids are up all night streaming Netflix and using the WiFi on their iPads and Apple TV. The next day they don't want to get up and go to school. Is there a way I can set up a separate access point for just the kids in AirPort Extreme and then turn that one off when i go to bed? Or somehow turn off the main network when I go to bed, without having to reconfigure the entire router the next day, and then simply turn it back on the next morning? I have to keep the Guest Network up as I have a paying tenant living in an apartment over my garage that uses that network.
In the event it's not possible with the AirPort Extreme, any other suggestions would be appreciated.
Thanks in advance.

You can configure the AirPort Extreme for Timed Access using the AirPort Utility. Basically what you are doing is restricting the time of a wireless device by its MAC address has access to the base station's wireless network.
To access this feature: AirPort Utility > Select the Extreme > Edit > Network tab > Enable Access Control: Timed Access Control...

Can one monitor audio off the eos 70d?

Similar Messages

Maybe you are looking for