Can one post movies via iWeb which cannot be saved by the viewer?

Does anyone know of a way to make movies on iWeb "view only" and not savable by the viewer of the website? This would enable me to post movies which I want to show but don't want them to have to have access to the file to use as they please.

If someone wants a video, he gets the video...
There's no full protection... One way or another you get all you want... And there are also many tools out there to grab stuff from websites and so on...
However using flash is better than using quicktime under this aspect too...
(Quicktime you just have to save as source and that's it...)
I don't know any way sorry...
Regards,
Cédric
Message was edited by: Akdream

Similar Messages

Can one watch movies in english on an austrian apple tv device

can one watch movies in english on an austrian apple tv device

It's all dependent on what's avilable in the iTunes store for your location.

How can one remove a raised texture pattern from a scan of the original photo?

How can one remove a raised texture pattern from a scan of the original photo?
Have several wedding photos scanned into PS Elements that were printed by the pro, photography studio on a raised pattern paper. Would anyone know how to remove the honey comb type pattern so that the picture canbe printed flat on glossy color photo paper?
Any help would be greatfully appriciated.
Thanks,

The best way to remove a pattern is to use a Fast Fourier Transform. There's a free plugin (as well as examples and instructions) here:
http://dl.dropboxusercontent.com/u/6795661/4N6site/improc/fftplugin/examples.htm
Using the plugin requires editing the individual colour channels, which PSE does not natively allow. You'll need the reasonably-priced Elements+ addin:
http://elementsplus.net/
Here's a crop at 100% of the result I got:
The pattern is much reduced. With some experimenting, you can probably do a little better.
Ken

I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

I have a MacBook Pro (Retina) and a Sony HandyCam DCR-HC48 video Camera. The Sony only exports video via Firewire, which is not available on the Mac. Is there a firewire to USB or to HDMI adapter?

tyler57,
it would be better to direct that question to Gary Loftis, since my MacBook Pro doesn’t have a Thunderbolt port.

Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004 Please help me in solving this problem.

Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004
Please help me in solving this problem.

Make sure Java is enable in your browser's security settings.
Open Java Preferences (in Utilities folder)
Make sure Web-start applications are enabled.
Drag Java 32-bit to the top of the list.
jnlp isn't an audio file format. It's just a java web-start program (Java Network Launching Protocol).

Can one obj access a private variable of another obj of the same class

Can one object access a private variable of another object of the same class?
If so, how?

Declaring variable private means you can not access this variable outside class
But other objects of same class can access it. Because each object have separate copy of variable and may have diff. contents for same variable.

HT201209 I can't use my iTunes card which I have 30 in the account i last used a credit card and I can't switch out of it

I can't use my iTunes card which I have 30 in the account i last used a credit card and I can't switch out of it

If you have an iTunes credit, any purchases will be processed against that credit first.
Cheers,
GB

Trying to back up iPad to external hard drive, "iTunes library file cannot be saved. The disk you are attempting to use is full."

This issue is somewhat complex so I will try to explain it as clearly as I can. Any help will be greatly appreciated.
It all began when I kept getting popups from my iPad saying that I had not backed up since May. I realized that was pretty dangerous so I decided to finally try syncing it to iTunes, though I had avoided doing so for so long because I knew that when I tried there was no room on the computer. I then remembered that I have an external hard drive with plenty of storage space, so I got that out and set it up with a folder to move iTunes and the backup into.
On iTunes I went to the Advanced Preferences and changed iTunes Media Folder Location to the G: folder, with the keep organized box checked. I also copied the previous backups from the original C: drive to G: so that I could delete the ones on C:.
I used Junction Link Magic to link my now empty MobileSync backup on C: to a new (JLM would not work unless it was empty) backup folder on external hard drive G:.
I plugged in my iPad to iTunes to sync it, and while it was backing up I checked the new folder on G: to make sure that the backup was being put there. It was.
However, about halfway through I got the message "iTunes library file cannot be saved. The disk you are attempting to use is full."
My question is Why? If it is being made in a 1.5 terabyte hard drive now, and not the computer, why is there no disk space? My guess is that it must still somehow be saving to the computer. But how? And how can I get it to save solely on the G: drive where there is enough room?
I am running Windows XP and the latest version of iTunes.
An additional but not as crucial issue:
Much of my music has been lost, with the being displayed next to the songs in the iTunes library, and only 50 (purchased) songs remain on my iPad. This was because those missing songs were stored on a different external hard drive ( I:). However, I copied many of the music folders on I: over to G: so that everything could be together. I am wondering if it is possible for me to get these songs back onto my iPad. But this is not my most important issue right now, because I believe that once I get the first issue solved I can simply plug in I: and G: at the same time while syncing the iPad, and get the songs back.
Note: I have come to realize the iTunes program itself is still under Program Files in the C: drive. Does this have to do with anything?

Short term, free up some disk space. Long term, move the library to a bigger drive.
tt2

"iTunes library file cannot be saved. The disk you are attempting to use is full."

Trying to back up iPad to NAS, "iTunes library file cannot be saved. The disk you are attempting to use is full." I already changed my iTunes settings which now points to my NAS. In ~/Library/Application Solution/MobileSync/Backup I created an Alias which points to the NAS. What else can I do to backup my iPad to my computer? I'm a newbie on OSX but have lots of experience on Windows systems. I always believed Apple OSX is easy to handle but iTunes seems to has it's own "will".

No suggestions? I'm wondering and a bit disappointed that no one has comments to this. Is it so difficult with OSX? Comments appreciated.

The iTunes Library file cannot be saved. The disk could not be read from...

Screenshot of error message: http://i49.tinypic.com/2ecp3sw.jpg
I tried deleting my library file and starting over with a new library, reimporting my music. Then, once again, I get this message:
"The iTunes Library file cannot be saved. The disk could not be read from or written to." with a checkbox that asks if I would like not to be warned of this again.
Information that might be relevant:
My iTunes files (everything but the application file) is located on my external HD (formatted for mac and has only been used on macs) and is connected via USB.
The external HD makes noises whenever it tries to save the library file, so it's obviously trying to write to the HD.
The iTunes folder creates a temporary file every single time this happens, but it is gone once the error comes up.
None of this happened (after reimporting my music to the new library) until I turned Genius on. Turning Genius off and deleting the Genius file hasn't stopped it, either.

ok--same scenario but
Running Disk Utility says: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
Trying to drag-drop the iTunes library folder from the ext HD to the internal MacBookPro HD gets: "The Finder can’t complete the operation can’t be completed because an unexpected error occurred (error code -50)."
DiskWarrior was able to access the drive and created a preview drive, but said:
DiskWarrior has successfully built a new directory for the disk named "My Book." The new directory cannot replace the original directory because of a disk malfunction.! It is highly recommended that you backup all of your data from the preview disk.! But when I try to transfer (off either the MyBook HD or the DW preview version of MyBook I get: The operation can’t be completed because the item “xyz” is in use.

ITunes Library File Cannot be Saved. The Disk Cannot be Read From . . .

I use a MacBook Pro with a healthy battery. My iTunes songs are on a USB drive. The Database and XML files are on my MacBook. Power went out in my house and the USB drive shut off. The MacBook stayed up and running. Power came back, powered on the USB drive, open iTunes, and bang: This sorry error: iTunes Library File Cannot be Saved. The Disk Cannot be Read From or Written to.
The disks are healthy, did an fsck and ran disk verify/repair. No problems. Restart iTunes, same error. Obviously a corrupted Databse file. This wouldn't be a big deal if only the XML info would be useful and actually restore critical info such as play count and dates which is essential for the Not-So-Smart Playlist dependencies to work.
This is the third time I've been burned with corrupted iTunes "Database" files. I use "Database" in quotes because a true Database wouldn't crap out like this. It would be recoverable. It would understand a simple SQL "Where" statement. It would have a maintenance script and some means for recoverable backup beyond the lame process of copying the XML file. Or it would at least read in the info the XML file.
I am becoming disillusioned with iTunes and I'm beginning to yearn for my old Linux box running GTKPod which never failed me....

OK, here's an update - After doing the restore as mentioned having everything seemingly work, I erroniously downloaded the iTunes 7.4 & 7.4.1 updates. Now, about 80% of library is non-responsive, ie: shows up in iTunes, but clicking to play does nothing at all. the other 20% of my library plays, but it's not the song it is supposed to be playing. For example, clicking on a song from say, ABBA prodes a wonderful Gorillaz track :-/ (The same Gorillaz track which will not play if I select it...)
I reiterate: WE NEED A MEANS TO BACKUP OUR LIBRARIES RELIABLY!!!!!!!!!!

Error: The iT Mus Lib cannot be saved. The required file cannot be found.

I'm getting this error repeatedly:
"The iTunes Music Library cannot be saved. The required file cannot be found"
I've reinstalled several times and even reformatted my computer. Still no luck. It was fine on an older version but this one just won't cooperate. I have to re add all files to the library each time I launch iTunes. arrrgh!
Please help =/

hi bpfriend!
i'm just doublechecking something here:
"The iTunes Music Library cannot be saved. The required file cannot be found"
is it saying file or folder?
incredibly rare (i've only seen it reported twice or thrice), but i have seen a message saying:
"The iTunes application could not be opened. The required folder cannot be found."
... with some earlier versions of itunes 6.0.x.
love, b

Broadcasting the querys which have been saved in the Portal Favorites.

Hi Friends,
I was trying to broadcast the report from Portal to User Email. I can do the broadcasting through the wizard as well as normal way.
My Question is ...i have saved some of the querys(iViews) in the portal favorites and when i try to broadcast , iam not able to find the saved iviews in the favorites.
Is there any way to broadcast the querys which has been saved in the portal Favourits.
Thanks in advance,

As far as I know, you can not save Queries to portal favorites. It is only saved in the backend side and you need Web BEx to access them.
Regards,
Erwin

The iTunes Library file cannot be saved. The disk cannot be found.

Hi,
Just curious if anyone knows what this iTunes error message means:
+The iTunes Library file cannot be saved. The disk cannot be found.+
I am attempting to play music from my library located on the a Lacie 1TB NAS, which allows me to play our iTunes library from either the iMac or MacBook.
Let me know if there's any further info needed on my set up to help answer my query.
Cheers

I'm getting the same error on the Mini with SL. Also a similar setup with the library on an external drive.
Music plays okay, but the message keeps popping up.
Some artwork has gone missing as well, which is a bit random too.
Any ideas?

Using Elements to create slideshow to post online via iweb....

Is this possible??? I am almost at my wits end trying to figure out a way to create a slideshow to post on my site via iweb that looks decent. iweb does have a slideshow it is only enabled IF the viewer wants to enable it. One other thing that I have tried is uploading to other sites and copying the html and putting it in a widget. This works great but looks terrible. Is there another way or does anyone have any other options? Thanks so much!!!!

How are you hosting your site, and which slideshow are you trying to do? Which version of elements?
If you mean the html slideshow in earlier versions of elements, you would need to upload that to a separate folder on your website and just link to it (you'll have to edit the html of the completed slideshow to give your visitors a way back to the main site). That's about as much as you can do.
I'd suggest looking into something like rapidweaver rather than beating your head against the wall trying to make this work, or using a photo hosting site and linking to the pics from your iweb page.

Can one post movies via iWeb which cannot be saved by the viewer?

Similar Messages

Maybe you are looking for