Can one syclo server connect to multiple SAP backends?

Hi All,
I am working with SAP Service Manager application and the backend is SAP CRM.
As we all know that the backend system setting for syclo server needs to be maintained in the JavaBE.ini file
Suppose I have a requirement where one of my screen has to deal with a status update development and the backend in this case is ECC and not CRM.
Can I achieve this ? I mean can we configure the JavaBE.ini file to connect the multiple SAP backend ? If yes please explain the process/steps to do so.
Thanks and Regards
Neha Mahanty
Message was edited by: Michael Appleby

Thanks Bill,
As I understand , Going with Standard SAP Integration mechanism means to have connection with CRM system and ECC system can be called internally from CRM via RFC's . Is my understanding correct here ? This can be done If we create a FC in CRM and internally call ECC FC via RFC.
Also I shall try the second approach too. However I have a question here.
Suppose I create a new JavaBE2.ini file and configure it for ECC.
Later when I create java steps will it automatically detect that which SAP system it should connect to? I cannot explicitly tell the Java step to call the ECC system , Can I ?
Please advise.
Thanks
Neha

Similar Messages

One R/3 connected to Multiple BW

Hello,
Can one R/3 connect to multiple BW?
Will delta correctly function ?
Does one datasource will have multiple delta queue based on connections to BW ?
Pranay

Hello,
Sure, the system holds the delta queues per target system as the initialization is done based on different selections and for a specific BI System.
You can check this:
OSS note: 775568 - Two and more BW systems against one OLTP system.
Regards,
Jorge Diogo

Can one User in HTMLDB have Multiple Workspace

Can one User in HTMLDB have Multiple Workspace , If yes Can you suggest some document to check .
If No as well is it documented any where ?

Thanks Rosy But I created a User HTMLDB user1
Now I assigned this user1 to workspace names as workspace1
When I created another workspace named as workspace2 and if I assign user1 to workspace2 ,
I don't see user1 in workspace1
So at a time I can see user1 in either workspace1 or workspace2 ( I am checking this from manage workspace screen )
Any Idea how can I assign single user in two workspaces .
When you say , admin account craetion with each workspace
This is even more simple if u see the ADMIN account created during workspace creation who have the one user for one workspace as well as lots of Workspace u are creating.Thus the Admin have multiple workspace access provision.
Each admin account is different & works independetly specific to that workspace , so I can have admin for workspace1 & admin for workspace2 both with their individual passwords ( Isn't this true )

11g Multiple Rpd on one BI server connecting to two different data marts

Hi
Did anyone tried and successfully implemented multiple rpds on one bi server. I have similar requirement in one of the clients place.
1. Install OBIEE 11g with vertical scaling( reason client doesnt want to spend extra money on additional server licenses) and would like to utilize the powerful existing servers.
2. Install 2 rpds on One BI Server and connect to two different datamarts.
3. Create two PS and provide two links to have two different reporting environments.
Appreciate with any pointers. I am very clear on Vertical Scaling and bumping up the Bi , PS and Java Hosts components. I saw a post with successful implementation of the same functionility in 10g and nothing in 11g. I already reviewed ritmanmeed blogs but did not give a complete picture of successfull implementation.
Thanks

Hi,
Yes, it is possible to have two different .rpds on one BI Server but then you need to set up two different Presentation Servers.
Refer the below threads for more information.
Re: multiples RPD in one server
Re: Multiple RPD & Multiple Presentation service instance on single BI Server
https://forums.oracle.com/forums/thread.jspa?messageID=9189677&#9189677
Can i put two rpd files in nqsconfig init file in BI Admin
Hope this help's
Thanks
satya

Can precalc server run in multiple SAP systems ?

We are running the precalc server multiinstance on a 64 bit server. Can we have the precalc server identified in 2 SAP systems ?. IE precalc_server1 in our production BIP system and QA System, BIQ.
I thought I read that this was not standard practice, but could not find.
I was wondering what the procedure is when you refresh your QA system from Production. Do you use RSPRECADMIN to delete the old precalc servers and create new ones ?
Edited by: Denise Carew on Feb 8, 2012 9:24 PM

Hello Denise,
This question came to SAP Primary Support some time ago.
You can use and maintain in two different systems.
It is not recommended to use in two system with too much workload.
So, if you use on QA system, just for tests, it is not a problem.
Best Regards,
Edward John
SDN Moderator.

Assignment of One Solution ManagerDiagnostics Agent to Multiple SAP Systems

Dear Experts,
according to the Powerpoint presentation attached to SAP Note 1365123, one single Solution Manager Diagnostics Agent can be used for E2E RCA with multiple SAP systems running on its physical host.
I have installed one Diagnostics Agent on a server where three ABAP systems are running. Each ABAP system on this server has been installed under an alias (i.e. all these SAP systems are reachable under the same IP address. No virtual servers with individual IP addresses have been defined.). I want to configure each ABAP system for E2E RCA. When running the Managed Systems Setup procedure for E2E RCA, I am not able to assign the diagnostics agent to more than one of these ABAP systems - after the first system has been configured for E2E RCA, the entry for the Diagnostics Agent on this particular server is no longer available in the drop-down list of Diagnostics Agents when configuring the next system.
Is my understanding of the presentation mentioned above wrong, or am I missing a trick here? How can I assign the Diagnostics Agent to all three SAP systems that are running on the same physical host?
Details about the environment:
SAP Solution Manager: SAP EHP1 for Solution Manager 7.0 (SP Level 24)
Diagnostics agent version : 7.01.7.0.20100326100205
Thank you for your time,
Rainer Walter

Hello,
Have you followed all the rules?
Rule 1
Consider the diagnostic agent as a standard SAP system
Rule 2
Install one Diagnostic Agent per host (Physical or Virtual) (You mentioned you don't have virtual hosts)
Rule 3
Each Diagnostic Agent gets mapped to the SMSY repository using the server name key
Rule 4
Do not install a Diagnostic agent on a host that only run databases or SAP Central Services
Rule 5
An Agent can only conenct to one single Solution Manager System
If you install multiple Diagnostic Agents on the same host, each one needs to be connecting to a different Soltuion Manager system
Rule 6
Choose the adequate diagnostic agent installer/version
Rule 7
In a switch over scenario diagnostic agent must move with their respective virtual host and managed components
These are the rules attached to SAP Note 1365123. You need to comply to the rules.
If you have multiple agents ont he same host, then they need to conenct to different solution manager systems....according to the rules. One agent per physical host is one of the rules...specifically rule #2. This is my take, and it seems pretty clear here.
Regards,
Paul

Multi SAP ECC Server Connection to Single SAP Portal

Dear Experts,
We have connected multiple SAP Client of same ECC server to Single SAP Portal and we are able to view data using various standard SAP ESS/MSS Objects.
Is it feasible to connect Multiple SAP ECC Servers to one SAP Portal Server for showing data from varios servers using Standard ESS/MSS Objects.
Any help appreciated.
Rgds
Gulshan

Hi Gulshan,
You are right....these are the JCO names being picked up by standard ESS/MSS applications.
The Standar DCs will be calling these JCO names only while connecting to the SAP Server.
As you described,
The portal do have system alias name as unique name.
You may need to use some customizations.....plz find the below threads...they may be of your help.
[Thread1 - Change the JCO name (RFC_META_DATA) |Change the JCO name (RFC_META_DATA);
[Thread2 - How to change the JCO reference to an existing model|How to change the JCO reference to an existing model;
Good Luck!!!
Biroj Patro.

Sun One Web Server connection pool goes stale after some time

Hi all,
I have a few web applications running on Sun One Web Server 6.1 (SP4). I configured a connection pool via the web admin of the web server. I do not know why the connections in the connection pool are never released after some time (this happened for 3 times with a couple of months in between). I need to reboot the web server to solve this problem everytime the connection pool goes stale. I have verified that the resources are released (stream and connection are closed) with proper programming logic. Even so, I think that the connections will be timed out (the setting is 5 minutes) by the web server as a bulletproof even if the resource is not released properly as implemented in the code logic. Can anybody help on this? I have been troubled by this problem by weeks.
Thank you in advance.

Hi all,
I have a few web applications running on Sun One Web Server 6.1 (SP4). I configured a connection pool via the web admin of the web server. I do not know why the connections in the connection pool are never released after some time (this happened for 3 times with a couple of months in between). I need to reboot the web server to solve this problem everytime the connection pool goes stale. I have verified that the resources are released (stream and connection are closed) with proper programming logic. Even so, I think that the connections will be timed out (the setting is 5 minutes) by the web server as a bulletproof even if the resource is not released properly as implemented in the code logic. Can anybody help on this? I have been troubled by this problem by weeks.
Thank you in advance.

How to find the server connected from multiple switched netwtwork

I have one server connected to distrubted switch or acces switch in network .
They were 45 switches in netwrok and need help how to find that server connected switch from Core switch ?
How many mehtodes and process we can use to find that connected physical switch ?
Thanks in advance !!!

It's a bit of a tedious process. but if you ping the IP address of the server from the core switch and then check the ARP entry to get its MAC address, you can then trace the address tables in the switches to find the switch that the server is physically connected to. Once you have the MAC address, you'll have to check the address table in each switch in the path between the core and the server to find it.

Sun One application server connection problem for Oracle DB

On our project in live environments we have six Sun One application servers that have been configured to connect to RAC Oracle database using OCI drivers. ( JDBC thick driver)
Sun one application server : Version 7.0.0
Oracle Database : Version 9.2.0.4.0
Following are two scenarios where Sun one server receives an error while attempting to perform any DML operations onto the database e.g. when you will try to send a insert/update msg through sun One.
Case 1: - If the Oracle package/procedure/function is compiled using �Alter package/function/procedure....� command
problem
Any attempt to perform a DML operation using RMI calls though Sun one application server with already established oracle connection will fail.
Sun One application server needs to be bounced to get an up-to-date state of the package.
Case 2: If the Oracle package/procedure/function is compiled using �Create or Replace package/function/procedure....� command
problem
First attempt to perform any DML operation using RMI calls though Sun one application server with already established oracle connection will always fail. Any subsequent attempts will be successful.
We are using JDBC OCI think drivers. I tried flushing Shared pool at the Oracle side but it didn't help. For some reason Sun One seems to Cache the session information for already establised connections with Oracle database. As its live system we don't want any outage. i.e we know bouncing oracle app server will solve the problem.
So just wondering is there way/workaround to make aware the already estlised connection from sun one appserver to Oracle DB about changed packages/proceduress in the DB?
Any thoughts on this would be much appreciated.
txns
Ravi

Forgot one thing: when I use remote debugging , it works.

Want to connect iView to SAP backend

Hi all,
I'm trying to connect to SAP backend with connector. But when I try this method, I get "java.lang.ClassCastException"??? This come from the bold line. Is there anyone have an idea about this or meet this problem?
public IConnection getConnection(IPortalComponentRequest aRequest)
IConnection connection = null;
IConnectorGatewayService cgService = null;
ConnectionProperties prop = null;
try
 cgService =
 (IConnectorGatewayService) PortalRuntime.getRuntimeResources().getService(IConnectorService.KEY);
prop = new ConnectionProperties(aRequest.getLocale(),
 aRequest.getUser());
connection = cgService.getConnection("D01", prop);
catch (Exception ex)
 throw new ConnectionPoolException(ex);
return connection;
Best regards.

hi,
i use the following lines of code and it works for me. Make sure you have the following reference in portalapp.xml.
<property name="PrivateSharingReference" value="com.sap.portal.ivs.connectorservice"/>
private IConnection getConnection(
 IPortalComponentRequest request,
 String alias)
 throws Exception {
 IConnectorGatewayService cgService =
 (IConnectorGatewayService) PortalRuntime
 .getRuntimeResources()
 .getService(
 IConnectorService.KEY);
 ConnectionProperties prop =
 new ConnectionProperties(request.getLocale(), request.getUser());
 return cgService.getConnection(alias, prop);
Message was edited by: Prakash Singh

Solved. Travel router WTR54GS sharing one wireless hotspot connection with multiple devices

Hi, Passing on info I've learned.
The manual for the WTR54GS mentions being able to "...use multiple devices on a single hotspot account in a coffee shop or airport lounge...". See my original posting, "How to set up a wireless private bubble at paid hotspot? WTR54GS?", which ended in a dead end. I subsequently had a Linksys live chat session and the representative provided the solution. Perhaps worthy to be included in the Wireless FAQ?
Situation: you have access to a paid hotspot (hotel room, meeting room, etc.) and you want to share the connection with several devices, also wirelessly.
Solution: the WTR54GS can accept an incoming Internet connection wirelessely and re-broadcast that connection to form your own private bubble or network. (Note the WTR54GS can also accept an incoming Internet connection via Ethernet cable).
Linksys Live Chat pointed me to these web pages.
Go to the Linksys Easy Answers page: For a schematic of the concept of "associating the travel router to a hotspot (wirelessly)" search for Easy Answer ID# 4831
URL for above is http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=4831&p_created=1167963305&p_sid=GmLnq3Zi&p_accessibility=0&p_lva=&p_sp=cF9zcmNoPTEmcF9zb3J0X2J5PSZwX2dyaWRzb3J0PSZwX3Jvd19jbnQ9NjImcF9wcm9kcz0wJnBfY2F0cz0xNzIxLDE3MjMmcF9wdj0mcF9jdj0yLjE3MjMmcF9zY2ZfbGFuZz0xJnBfcGFnZT0xJnBfc2VhcmNoX3RleHQ9V1RSNTRHUw**&p_li=&p_topview=1
There is a "configuration simulator" that shows the options for selecting a wired or wireless incoming Internet Type.
http://linksys.com/ui/files/WTR54GS/1.0_15/Setup-Wireless.htm
The hotspot has to be "open", that is transmitting an SSID and with no WEP or WPA key. It may have a log-in page accessible via a web browser, this is okay as this will be passed onto the connected device.
My personal application is to be able to connect a PDA that has a 801.2b wifi to a 801.2g wireless network. I haven't tried it but if this works, it will extend the useful life of my PDA in a "g" environment. Will report back once I find a "g" only environment. Comments?
-Tony
Dang, the long URL is making for a really wide message. Is there a fix?
Message Edited by tony_vancouver on 02-28-2008 02:08 PM
Message Edited by tony_vancouver on 02-28-2008 02:12 PM

There are two conditions which must be met in order to use your WTR54GS to "extend" an incoming, wireless internet connection:
The incoming connection must be unsecured. You have already covered this point;
The security settings on your WTR54GS can only be set to "WEP," or to "Disabled." If you choose "WEP," then you can use either a 40/64-bit, or a 128-bit key.
If those two conditions have been met, then it works fine -- says the guy who is sharing one paid internet conneciton in his hotel amongst three devices, and with co-workers in nearby rooms.

Can't connect to a SAP backend system via portal/web dynpro/JCo destination

Scenario:
 Can't successfully set the JCo destination.. Always got a Java exception..
Solution:
 Use the router string "/H/sapserv3/S/3296/H/", instead of
"/H/sapserv3.wdf.sap.corp/S/3296/H/".
 This looks like a bug in portal NW2004s SP9.

Sorry for the delay, but I was not able to get access to this system until this afternoon. I ran the ARP command you suggested on the server, and it did return the correct IP and MAC address values for the problem workstation.
I then ran IPCONFIG/displaydns on the server. There was a record there for the problem workstation. The "record name" matched the machine name correctly. However, the "A <Host> Record" value was for the wrong IP address (192.168.1.4
rather than the actual workstation IP of 192.168.1.7). This could certainly explain why I am not able to RWA/RDP to the machine by name, although I can make an internal RDP connection via IP address.
Could you please tell me what I need to do to repair this problem? Should I run IPCONFIG/flushdns on the server?
Thanks again for your assistance.
John

Can one AppleID be used on multiple AppleTVs simultaneously?

May I sign one AppleID into multiple AppleTVs simultaneously?
And does the answer change for first, second and third generation AppleTVs?
Can these two devices, signed in with one ID, pull stream content from one computer?

I would say Yeah As it Can be used on several other iOS devices at once and osx devices too

Can one apple ID belong to multiple family sharing groups?

I'm interested in starting a family sharing group with my siblings (surprise). They have children of their own, however, so if I invite them to my new group, will they also be able to create a different group for themselves with their children?
My thought is that my siblings can more easily share information and photos. I wasn't interested in approving app purchases for their children however so I thought they could create a separate group with their same parent ID for themselves with their children. If I'm thinking of this right, and ID needs the capability of belonging to multiple groups. Is that possible?
Thanks kindly.
Bill

Hi Mdbarnharts,
Thanks for visiting Apple Support Communities.
It sounds like your family members are using the same Apple ID to share purchases, and now you're receiving messages sent and received by your kids.
You can set up and manage Apple IDs for your children through the Family Sharing feature.
You can find more information about Family Sharing and setting up an Apple ID for your kids at these resources:
Start or join a family group using Family Sharing - Apple Support
Family Sharing and Apple IDs for kids - Apple Support
All the best,
Jeremy

Can one syclo server connect to multiple SAP backends?

Similar Messages

Maybe you are looking for