Can One technical system be assigned to multiple BS system

Hi All,
I just need small confirmation, i want to know wether one technical system(ABAP) with same client be assigned to multiple busines system..
Regards,
Raj

Hi ,
No, you cannot have 2 BS for the same technical system and same client.
(you can have different BS for every client of a technical system)
Raghu

Similar Messages

  • Can One Business system have two technical systems assigned to it

    Can One Business system have two technical systems assigned to it

    hi,
    the technical system describes the physical view and the business system the logical view, respectively.
    So in most cases you must define both but while a technical system can only link to one WEB AS, more than one business systems can link to the same technical system.
    But one Business System can have only one technical system.
    Logical system for senders and receivers in XI can be defined as business systems which is associated with technical systems. You may req to create BS for identifying individual senders and recievers. Technical system is gateway having the technical details and it is in the ID we designate it to be either a sender or a receiver.
    Follow the link below to learn moer on it:
    http://help.sap.com/saphelp_nw04/helpdata/en/97/9d84494b9f45caabe0713296d89b72/content.htm
    Regards
    Mamta
    Edited by: Mamta Yadav on Sep 12, 2008 11:13 AM

  • Can one physical system have multiple logical systems? if yes  why?

    can one physical system have multiple logical systems? if yes  why?
    Regards
    sriman

    Logical system is an ALIAS name for a physical LOCATION. so we may have more than 1 logical system name for a physical location.
    eventhough its allowed,but normally we dont do that.
    you can do this in FILE transaction.
    Regards
    srikanth

  • Transport Groups: One Technical System targets two technical systems

    Hi guys,
    One question relating to transport groups.
    Is it possible to define for one technical system which belongs to one group, let's say DEV, two target Business Systems which belong to another group, let's say PRD?
    Meaning,
    Technical System XPTO targets:
       Group PRD   Tech System: XPTO2
       Group PRD   Tech System: XPTO3
    Thanks

    Hi VJ,
    Sorry, wrong word...I meant Tech System to 2 Tech Systems.
    Having DEV System targeted to QLD and PRD tech system which are on the same group.
    DEV Tech System targets to group
    Group PRD  : QLD Tech System
    Group PRD  : PRD Tech System

  • Can one business area be assigned to several company codes? how to do it?

    Can one business area be assigned to several company codes?
    what are the configurations?
    thanks

    Dear Humility,
    If, I am not wrong, Business Area is assigned to Company Code via Finance (i.e. NO Direct assignment, but can be used across company code). You can assign a business area to an org. object through the account assignment tab.
    Business areas are generally company-code independent. You can post to them from any company code. The Business area field shows up as an additional account assignment when posting to an account as long as the field is turned on in configuration. The field can be made a required entry during posting.
    If certain company codes are not active in specific business areas, you can use a validation to prevent postings to this business area from the company codes specified.
    Important Transactions, related to Business Area Configuration:
    OX03     Create Business Area
    OMJ7     assign Business Area to Plant / Valuation Area and Division
    OVF2     Org Unit: Sales Area - Business Area Determination rule
    OVF0     Org Unit: Business Area Determination rule
    OVF1     Sales Area - Business Area Determination rule Slsorg/DstCh
    Best Regards,
    Amit
    Note: Some Relevant Links:
    [Business Area|http://www.sap-img.com/zf003.htm]
    [SAP Business Area|http://www.saptechies.com/configure-the-sap-business-area/]
    [Validation of Business Area for Company Code|Re: Validation of Business Area for Company code;

  • Can one create a smart playlist for multiple podcasts and to...

    Can one create a smart playlist for multiple podcasts and to play one after the other on your iPod? I want to combine podcasts of the same topic in a smart playlist. When I tried to do this I chose smart playlist, album starts with, and then did it again for each podcast I wanted. That didn't work. If it can be done how do you do it?
    I have a fifth generation iPod which is always updated to the latest as well as the itunes.

    Say for example I want to put different car related podcasts in one smart playlist. Car related podcasts such as Wall Street Journal Car Cast and NPR Car Talk. Can it be done and if so how?

  • Can one profit centre be assigned to many business areas?

    Hi
    Can any one tell me that whether "one profit centre be assigned to many business areas"?
    Regards
    Rakesh

    Dear,
    We never assign tehm to ech other,
    But both business area and profit centers are created for internal reporting. Now a days profit center is a felling that business area enhancement would not be supported by SAP future version
    Business area:An organizational unit in external accounting, which corresponds to a separate operational or responsibility area in the organization, and value flows recorded in Financial Accounting can be assigned to it.
    The business area should be treated as a separate economic unit, for which you can create an internal balance sheet and a profit and loss statement. The business area is, however, only an internal organizational unit and does not have any external impact.
    You define business areas if you wish to create a balance sheet and a profit and loss statement for internal areas, in addition to company codes.
    Profit Center:
    A profit center is an organizational unit in accounting that reflects a management-oriented structure of the organization for the purpose of internal control.
    you can use your profit centers as investment centers.
    Profit center Accounting at the profit center level is based on costs and revenues. These are assigned statistically by multiple parallel updating to all logistical activities and other allocations of relevance for a profit center.
    Regards,
    R.Brahmankar

  • WebAuth - Can one username/pwd be used by multiple users simultaneously?

    Is it possible to setup web authentication so that many users can share the same username/password?
    (Now before you tell me why this is bad and all that - I already know!)
    This is specifically for an application where the customer has hundreds of guest users coming in to a conference center each day and they want to be able to provide Internet-only access using the WLAN.
    They wish to restrict access to legitimate guest users only and wish to confirm user legitimacy with a simple username/password challenge to prevent unauthorized access to the WLAN.
    In an effort to reduce the effort to setup each separate guest user login for hundreds of users, the customer wants to setup only one username/password-of-the-week and have all legitimate guest users use that login info.
    So... my questions are:
    Will the WLAN user get an error if more than one user attempts to login to the WLAN using web authentication at the same time?
    If so, is there a setting that would permit multiple simultaneous login using the same username/password?
    Thanks,
    John

    Set the number of simultaneous logins to 0. My clients have done this and have not experienced any issues.

  • Can one enter different payment terms on multiple lines of PO

    Hi All,
    Would it be possible to enter 2 different payment terms for 2 different lines on a purchase order. Say for example on item line 1 i want a payment term of Immediate and on item line 2 i would want it be 30Net.
    Assuming i would recieve 2 invoice for this PO one for line 1 and another for the 2nd one. Please let me know if this is a supported functionality/scenario.
    Thanks,
    Shilpa

    Terms is at the header level.
    Create 2 POs instead.
    Thans,
    PS.

  • Same Technical System multiple Business systems?

    Hello,
    We have a unique (atleast i felt it) landscape where we have 2 Prod PI system. We have divided out interfaces logically into 2 categories and they will run on the respective prod system. Both this prod have its own SLD and hence there is no issue here.
    The issue is with the Pre-Prod where like prod we have 2 PI systems (and 2 integration servers) but they both share the same SLD. We have only one SAP R/3 backend system and hence we have only one technical system in the SLD but this SAP R/3 system has to connect to both the Pre-prod systems for different interfaces. For this to happen we have to create 2 Business systems with the respective PI pre-prod Integration Server. But SLD doesnt allow to create 2 business systems for the same technical systems.
    Is there any way around this as we cannot change the SAP R/3 system and also cant have different client in R/3 for each of PI Pre prod.
    This is a major roadblock and requires your expert advice on how to proceed in this scenario.
    Regards,
    Yash

    Shitij,
    You are correct in understanding that the requirement is to create 2 business systems for the same technical system with same SID (S*1) and same client.
    The reason i need this is because I have 2 PI system P1 and P2 with 2 different integration server which share the same SLD. Now when i create a business system for S1 i specific the inegration server for P1 and add this business system in the transport target for P*1.
    How will i do the same for P2? I cannot create a new business system for S1 with integration server of P2 and add it in the transport target for P2. If i dont do it i cannot do any transports as it will give error like no Business system found in SLD.
    Hope i made it clear.
    Yash

  • Doubt regarding creation of technical system.

    Hi i am doing interface between R3 and JDBC(third party)
    1)I  have created one technical system(type as web as abap) for R3 and one technical system(type as third party) for JDBC.
    2)but we usually download one software component in IR and we create namespace under downloaded software component(swc). we do create all objects for this interface is under this namespace.
    3)when we create technical system it will ask us install product, let us say we assign a prodocut called xyzr3 for Tecnical syste(TS r3), under this we have assigned a software componet(swc) called  xyzr3sw.
    4) when we create technical system for third party it will ask us to installed product, should i create new product for this technical system or do i need to assign a product xyzr3 witch is already created for R3 TS(tecnical system)?
    5)bcz we are using only one namespace for this interface whitch is created under xyzr3sw(sc of r3 ts, type as webase abap)
    6) let us say , we have created new product and swc for third party TS, any way we are not importing this sw component in IR, bcz we have imported xyzr3sw(sc of product, ts of r3), so do i need to assign same product xyzr3(witchi is creted for R3) , xyzrsw (swc created for R3) to ts (ts of type thired party)? bcz we are importing only one swc in IR to develop the interface(one name space)
    thanks,
    dhanush

    Hi Dhanush..
    4) when we create technical system for third party it will ask us to installed product, should i create new product for this technical system or do i need to assign a product xyzr3 witch is already created for R3 TS(tecnical system)?
    Yes. I think you should create new product here..
    6) let us say , we have created new product and swc for third party TS, any way we are not importing this sw component in IR, bcz we have imported xyzr3sw(sc of product, ts of r3), so do i need to assign same product xyzr3(witchi is creted for R3) , xyzrsw (swc created for R3) to ts (ts of type thired party)? bcz we are
    importing only one swc in IR to develop the interface(one name space)
    Yes. You do not need to import new software component version created for Third party.
    But I'll suggest here..since you want to use JDBC on the receiver side...you can just create Business Service ( where you do not have to specify technical details) and you can used as a receiving system. No need to create 3rd party here..
    Let me know if you need more details.
    Nilesh

  • Technical Systems and Business Systems

    Hello Everybody!!!
    I have some doubts, can you help me, please???
    1) Technical Systems are application(software) systems, ok? They aren't hardware systems, ok?
    2) In my SLD I should have a SAP ECC system as a technical system and each of their clients as a bussiness system, ok?
    3) For third-party systems, where the client concept doesn't exist, I should have one technical system and only one business system for my third-party system, ok?
    thanks a lot
    Julio

    hi  julio ,
               ur view is correct  except in the technical system .
    1)   technical systems are the physically  located systems in which we can create only technical system for any physically  located system .
    2)   bussiness systems are logical  systems . according  to the type of technical  system we can  create the no of bussiness  systems .
       technical system of type W AS ABAP  we can create multiple business systems as there is the concept of clients .
       technical system of   third party   we can  not create more than  one business system  as there  is  no  matter  of  client .
    3)   so  for  every  third party  systems  only  one   business  system  will  be  there .   
    some  important  points :. 
        atleast  one   business  system  will  be  there  on   any   system .
    we  can   create   more  than  one   business   system  on  third  party systems .

  • SLD - Error in creation of technical system

    hi experts,
    when we go to create a new technical system type WEB AS ABAP, the system said 'system already exists'
    it exist other technical system for this system of type third party,
    don't is it possible have together?
    very thanks,

    Hi,
    The problem is due to whatever technical system your are trying to create those details are  already contain another technical system name in SLD.  We can't create more then one technical system with same parameters.  Better to use existing technical system or delete existing one create new one.

  • Technical System Types

    Hi Experts,
    When I creating the Technical System we are having the options like
    1.Web As ABAP
    2. Web AS Java
    3. Standalone Java
    4. Third Party.
    I want to know the difference between Web As Java and Stand Alone Java? Which one is used in which scenario.
    Please can u explain the differences.?
    Thanks
    Sridhar

    Hi Sridhar,
          Adding to the above information...
    1) Web As ABAP: Used to when you wan to communicate with any SAP System.
    2) Web As java: Used to communicate any Java System which are under in SAP Netweaver(WAS).
           when you want to communicate a EP(Enterprise Portal) you can use Web as JAVA in this case you cannot use standalone java.
    3) Standalonejava:Used to communicate normal any java application.
    4) Thirdparty: using third party even you can communicate any EAI tools also.
       Let's say you wan to commnicate with webmethods in such scenario you can use Technical System as Thirdparty.
    Hope I am clear.
    Please let me know if you have any queries?
    Thanks and Regards,
    Chandu

  • Change servername from technical system in sld

    How,
    i have to change the servername of one technical system in sld (third-party); anyone know what to do?
    Thanks in advance,
    Frank

    hi Frank,
    what i came to know, it is bit difficult process. go through this discussion you will get an idea.
    Re: Change host name
    regards
    Ramesh P
    Message was edited by:
            Ramesh P

Maybe you are looking for