Can only boot into Windows 7. Can't even boot from Snow Leopard DVD.

I have no idea what prompted this. I don't recall installing any OS updates recently, other than some Windows Live apps in Windows 7.
I have an early 2009 Mac Mini with Snow Leopard, and have Windows 7 64-bit installed in a Boot Camp partition. When I installed Windows 7, I couldn't get the Boot Camp utility to install within Windows (I guess because it's 64-bit) so to switch back and forth between OSes, I just shut down the Mac and restart it with the Option key pressed, and select Mac OS X when I want to return to Mac. This has worked for about a month and a half now (ever since I got Windows 7). Suddenly I have problems.
I first had problems booting into Windows or Mac. I got to the grey screen with the Apple logo, with that spinning "progress" thing going for a while, then it would freeze up and get stuck on the grey screen with the Apple logo. I zapped the PRAM. No help. Then, after disconnecting all external drives (I have several) and extra USB devices, I was able to boot from the DVD install disk and reinstall Snow Leopard on my internal drive. Joy, or so I thought. Then I booted into Windows 7, and after some weirdness getting it to start, it did successfully start and ran just peachy.
Then I turned off the Mac and held down the option key (as usual) to return to Mac OS. But now all that happens is that I get a grey screen for a few seconds, then the Mac boots back into Windows 7, which seems to work fine. (I'm in Windows 7 right now.) I turned on one my external drives (Snow Leopard installed, connected via Firewire 800) in hopes that the Mac would boot into that, but same thing. Ignored and back to Windows 7.
Then I thought I'd boot from the install DVD again by putting it in the drive and holding down the C key as I restart, but the same thing--a grey screen for a few seconds, and then booting right into Windows 7. I can't seem to escape Windows 7! It's a bit disturbing when it won't even recognize the install DVD.
I tried to call Apple Care since I'm within my 90 day support window, but of course they are closed. I'm figuring that I'm going to have to take this into an Apple Store, but thought I'd see if anyone has any ideas. Any advice will be appreciated. Thanks.

According to Apple, Win 7 64bit is supported with Bootcamp 3.0. If bootcamp 3.0 is available; I could not find it anywhere on Apple's website. It appears the most recent version is 2.2. The only place I could find 3.0 is not on Apples website and it's a questionable source so I won't post it here.
It may just be a matter of time before Apple makes it available. I'm not suggesting you wait, however if the install disk can't be used, I'm not too sure where u could go from there. Calling Applecare might work.
If you do a simple google search using the terms 'download bootcamp drivers windows 7' u will see what I was referring too.
Here's what I found from Apple (It doesn't specifically mention 64bit however just win7): http://support.apple.com/kb/HT3920
This is not from Apple, but specifically addresses whether they support win7 64bit: http://www.macnn.com/articles/09/08/31/boot.camp.win.7.64.support/
Here is more info about bootcamp 3.0 and win7: http://www.apple.com/support/bootcamp/

Similar Messages

  • IMac with bootcamp and parallel boots into windows 7 but won't boot intoxc lion.

    IMac with bootcamp and parallel boots into windows 7 but won't boot into Mac OS lion?

    Hi,
    Thanks for your suggestion. Actually that was not the problem, because I had the Mcintosh drive set as my boot drive. The answer was that my Lion Os got somehow corrupted and I had to reinstalll Lion. This was all after I discussed the situation with the Apple Support people.

  • Can't Install Boot Camp from Snow Leopard DVD in Windows 7

    I have an iMac "Core 2 Duo" 3.06 24-inc (08) running 10.6.2 and Windows 7.
    I was able to successfully use the Boot Camp Assistant to partition and install Windows 7 on my iMac. After the installation, I was able to download updates from Windows Updates which included video drivers.
    However, when I inserted my Snow Leopard DVD to install Boot Camp 3.0, the Setup.exe only gave me two options: To Install Mac OS X remotely and to install CD/DVD Sharing. I was not presented any options to install Boot Camp.
    I did manually navigate the Snow Leopard DVD and found a Boot Camp directory with its own setup.exe and when I clicked on it, it gave me an Installation Error stating "Boot Camp x64 is unsupported on this computer model". I did some research and I found no mention of my iMac listed as an unsupported model.
    Any help would be appreciated.

    When I inserted Snow Leopard DVD, the autorun didn't show me an option to install Boot Camp Drivers. Just like the author of this topic, it only showed me 2 options: to Install Mac OS X remotely and to install CD/DVD Sharing.
    Then, I've run Windows Explorer, navigated to Snow Leopard DVD, opened Boot Camp folder and runned "setup.exe". The installer opened and Boot Camp 3.0 was installed successfully.
    I don't know if it could help you guys with that error message, but after the installation of Windows 7 64bits, I've rebooted my Macbook Pro. Only after the reboot I did the Boot Camp Drivers installation.
    You can also try to run the "setup.exe" as Administrator (right-click, Run as administrator).
    Also, my Snow Leopard DVD is that grey one with the white "Mac OS X Install DVD" labelled on it.

  • Contacts. Can't add new contacts after upgrading to Mtn Lion from Snow Leopard.

    I can't add new contacts after upgrading from Snow Leopard to Mountain last week.  I do not use iCloud.  Any suggestions?

    Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
    First, empty the Trash.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
    find . $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl \) 2> /dev/null | wc -l
    Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
    The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

  • IMac will not boot from Snow Leopard DVD or original Leopard disc!

    Hey,
    I am going mad! I am trying to update my iMac (with original Leopard installed) to Snow Leopard. Here is what I have tried:
    Using the Snow Leopard DVD:
    - A standard install: the disc ejects after about 15 minutes.
    - Put another working DVD in and verified it in Disk Utility, all ok.
    - Verified the internal hard drive in Disk Utility, all ok.
    - Verfied the SL DVD, all ok.
    - Decided to try a clean install, so backed up everything.
    - Tried to boot from SL DVD by using the Utilities option, it ejects the disc at restart.
    - Tried to force it to boot to the DVD by restarting and holding the C key, it ejects.
    - Restart holding the Option key, it ejects.
    - Restart holding the Ctrl, Alt and Option keys, ejects.
    - Everytime it ejects and starts up normally.
    - So I cleaned the disc, updated all the firmware, reset the NVRAM/PRAM via holding keys when restarting, and repaired disc permissions.
    - Tried to force it to boot again, ejects.
    - Tried to put the disc back in straight after it ejects with all the steps, still starts up normally.
    - Changed the start up disc in System Preferences to the SL DVD, restart, it ejects.
    By now I am readying the noose...
    - Dug out the original Leopard installation CDs.
    - Repeated all the forced boot restarts (C key, Option key, Ctrl, Alt, Option keys), same story.
    - Repeated changing the start up disc in System Prefs, same story again.
    - Call Apple Support, they told me to try everything I have tried and that the DVD drive is dodgy, well it works with everyhting else! Burning and reading! I really don't want to have to go to an Apple Store- it's miles away (a costly journey) and I just do not have the time for all of this.
    RAWR! Does anyone know what to do? Please? S.O.S.?

    Possible scenarios:
    1: The 10.6.3 SL retail disk is bad, it happens.
    2: Your not using the 10.6.3 SL retail disk but one from another machine which doesn't have the drivers for that machine.
    3: Your optical drive is funky or some other hardware issues.
    4: Your trying to install 10.6 onto a PowerPC based Mac, no can do.
    5: Your not using a wired keyboard for boot key commands, have some other hardware conflicts.
    Possible solutions.
    1: Copy the SL 10.6.3 disk using Disk Utility to another DVD, the error checking may resolve the original disk's issue.
    http://www.brokenhomeboy.co.uk/pierow/blog/2011/10/make-a-bootable-backup-snow-l eopard-install-disc/
    2: Make a SL bootable USB
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    3: Call Apple for a new 10.6.3 disk (and make copies for backup before Apple discontinues selling it)
    If your upgrading to 10.6 to get to 10.6.8 to upgrade to 10.7, be warned of this:
    1: Your 10.5 software will not work in 10.7, no more Rosetta or PPC based code.
    2: Your hardware will not qualify if it's a 32 bit Intel Core Duo, also you may experience slowdowns in performance over 10.6 (10.6 is the fastest OS X version for Intel Macs) in older Intel hardware (I suggest Early 2011 Mac's and later only for Lion)
    3: Mountain Lion 10.8 is reportingly coming out this summer and will not run on a lot of older Intel based Mac's because of heftier graphics requirements.
    4: 10.6 has the widest range of current avaialble software and drivers for third party hardware.
    My advice, stick with 10.6.8 and stay there, buy a new Mountain Lion machine after this summer. Skip Lion completely.

  • Cant boot from snow leopard dvd and install crashes computer

    Folks, hi, newbie to this forum but at wits end.
    I have a MacBook Pro 17inch mid 2010 model. I added the OMG disk doubler and ditched the internal dvd, so I now have 2 X 500GB hard drives, one of which has the OSX. This disk in trouble and Disk Utility says that it needs repairing, but i need to repair after booting from an different disk.
    So, I added a usb dvd drive and put in snow leopard. It would not boot via holding down 'c' and the option key only saw the current drive. No problems I thought, I will install onto the second hard drive and boot from that. The process got a fair way though (20 mins) and the computer crashed. I checked that it is GUID, tried again, and ditto. So, I made a new partition that was nice and clean -- and ditto. Stuck about now, I tried to format a usb hard drive -- ditto. Hmm, didnt want to, but out came the second drive and in went the old dvd drive -- same issue -- could not boot using c button and the option key did not recognise the snow leopard install. Out came the drive and I went to the apple store -- they told me that the Snow Leopard I had brought was an upgrade and that I needed a Box Set. $169 later and - you guessed it -- the dvd is the same, no start on c, not recognised on option, and the computer crashes if I try and install to the second hard drive or an external drive.
    Help anyone??

    when i go to system prefs- startup, the dvd does not show up in the list of startup drives. The apple salesman said that the OSX install disk I purchased was not a start up disk / full install but rather an upgrade only disk. That is why he said to use the box set as a 'full install' - but both appear to not start up or be able to do a clean install. I just end up with a set of files call Mac OSX install files.

  • Can't open new windows in Safari 5.1.2 for Snow Leopard

    I have downloaded the 10.6.8 combo update and of course installed the new version of Safari.  Now I cannot open a new window (whether it is a link or if I do apple-n on the keyboard).  I must be missing something here that must be very simple to fix this, but I have tried everything.  I might have to find an old link to a 5.1.1 site and download that version again (it was working fine before I downloaded the new version)
    Any help would be appreciated!  THANKS!

    Try emptying the cache and resetting Safari.
    From your Safari menu bar click Safari > Empty Cache. Try a new window.
    If that didn't help, back to the menu bar, click Safari > Reset Safari. Select the top 5 boxes, click Reset. Try again.
    If that didn't help, go to ~ / Library / Caches / com.apple.Safari / Cache.db
    Move the Cache.db file from the com.apple.Safari folder to the Trash and restart your Mac.
    Try again.
    ~ (Tilde) character represents the Home folder.

  • Creating a "Boot into Windows" button/shortcut

    Does anyone know if there is a way i can create a "boot into windows" button for linux.  I would like to put it on my linux desktop, so when i need to boot into windows, i can shutdown arch and boot right into windows, without having to go through grub and all that stuff.  I have read something about qemu, but dont really know if that will work.  Any help would be appreciated.
    Thanks!

    _Gandalf_ wrote:
    I hope you are using ext3 ...
    IMHO if you are using ext3 your problem is solved, create 2 menu.list one called menu.list.linux and the other menu.list.windows, put the default entry to the desired one and take the delay down to 0 along with hidemenu command ( boot into selected distribution instantly.. )
    On linux create the following script
    #!/bin/sh
    cp /boot/grub/menu.list.windows /boot/grub/menu.list
    [[ -f /boot/grub/menu.list ]] || exit 1
    shutdown -r now
    Now go to windows, install Ext2 FS ( http://www.fs-driver.org/ ) mount the boot partition and create a bat script
    copy E:bootgrubmenu.list.linux E:bootgrubmenu.list
    i dont remember if u can reboot from a bat script but that will do the trick...
    P.S: yea i know, it would be better to use one script and use sed/awk to patch it, but how will he patch it on windows ? personaly i don't know how :oops: so I took the idea of 2 menu.list(s)
    I am using EXT3 and i already have the Ext2fs installed, so i think those 2 scripts should do the trick!

  • I have a MacBook 10.5.8 with Boot Camp. I can only operate the Windows side. When I move into MacOS it does not open.

    I have a MacBook 10.5.8 with Boot Camp. I can only operate the Windows side. When I move into MacOS it does not open.

    Your phrasing is not clear. How do you reboot into Mac OS? /can you describe the process step by step?
    Usually, you should do like this:
    - while in win, restart
    - immediately after chime, press option or alt key
    - wait for 2-3 seconds, you should see the boot options
    - select Mac OS partition
    If you have performed all these steps, and, after choosing Mac OS partition, you cannot boot into Mac OS, then your system is corrupt and should be reinstalled.

  • Can I use my Intel-based MacBook to boot into Windows 7 from an external HDD?

    Okay, so I need to use Windows for some simple applications. Problem is, I don't have a Windows desktop anymore and while I have both Windows and Linux partitions along with Mountain Lion on my installed hard drive, I'm probably going to wipe said drive and just use the entire partition for Mountain Lion. That said, I'd like to use an extra hard drive I have lying around to boot Windows.
    My questions are:
    1. Does my MacBook support USB boot to Windows?
    2. If my laptop does support this, can someone point me to a set of good reliable instructions to install Windows onto the external hard drive and boot into it by USB?
    Thank you; have a blessed day!

    You seem to have a triple boot system that was done using the 10.6 installer disk and a copy of rEFIt.
    I know because I had the same thing once.
    I can tell you what will happen if you decide to upgrade 10.7 or 10.8
    1: The EFI and GUID is going to change, rEFIt hasn't been updated in ages since 10.7 started rolling out back in about June 2011. There will be adverse effects with rEFIt so I hear.
    2: The 10.8 upgrader is going to barf at your triple boot system, it will upgrade the 10.6 partition but warn you that the 10.8 RecoveryHD partition (10.7 and 10.8 both install) that it normally installs at the very bottom of the drive will not be installed and you can't enable Filevault.
    Intel Mac's can have only 4 bootable partitions on the drive, the 10.7+ installer is normally dealing with EFI, MacintoshHD, BOOTCAMP, RecoveryHD. It barfs at anything else it doesn't understand and will not install RecoveryHD partition, which on a non-Internet Recovery capable hardware is required to reinstall the currently upgraded OS X operating system version. But you can always go back to the 10.6 disks and wipe and restore that way or via 10.6 USB boot key.
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    So with 10.7+ you'll have to use something like Carbon Copy Cloner for the OS X partition.
    So since rEFIt is going to be hosed, so will your ability to use the EFI based program to boot into the three operating systems at boot time.
    I assume you found this out and why you want to dump Windows on a external drive. However Apple's EFI doesn't recognize Linux as a boot option.
    There is a rEFIt fork that will allow Linux to boot on a Mac: http://www.rodsbooks.com/ubuntu-efi/index.html
    Windows as you now know can't be booted off a external drive, however if your use of it is minor, you may want to consider using a virtual machine to run it in OS X or Linux instead using the free VirtualBox.
    Windows in BootCamp or Virtual Machine?
    You should Carbon Copy Cloner the OS X 10.6 partition to a external GUID OS X Extended J (JHFS+) drive.
    You can use WinClone 3 in OS X to clone the Windows partition to a external drive, but it's a backup only, no booting capability. Restoring it will boot on the internal drive of course.
    Linux you should already know how to clone it to a external drive using dd.
    I advise you use the 10.6 install disks to set up your new partition scheme, but your going to have to uninstall rEFIt and return the machine and firmware back to basic Apple factory system as possible before doing anything.
    EFI doesn't get erased, it resides in NVRAM and the EFI partition, controls the at boot key commands to boot off OS X install disks, so it's important to uninstall rEFIt completely before upgrading OS X.
    If the Windows version your using is XP, to install that first using BootCamp in a fresh 10.6 install and reverse clone using WinClone before upgrading to 10.7 or above. It will be grandfathered in, but can't be reinstalled later.

  • Hi, can anyone help with the problem I am having with pro book 4440s? I can't boot into windows 7.

    Hi, can anyone help with the problem I am having with pro book 4440s?  I can't boot into windows 7, nor can I enter the bios cause i fogot the password. the error I am getting says "windows failed to start. a recenr hardware or software change might be the cause.   it then gives me options to boot from a disc but I can't do that cause I am unable to get into the bios to change it to boot from a disc.
    The error message goes on :
    File: \Boot\BCD
    Status: oxcoooooof
    info: An error occurred while attempting to read the boot configuration.
    the only two options on the screen are enter=continue and ECS=exit
    I just can't get pass this screen.
    Please help.
    Thanks

    Hi,
    If you don't already have one, use another PC to create a Windows 7 Rescue CD.  Download the relevant ISO from the links below.
    Windows 7 32bit
    Windows 7 64bit
    You should use an application such as ImgBurn to burn the ISO to a CD - a guide on using ImgBurn to write an ISO to a disc is Here.  Once created, or if you already have this, tap away at the esc key as you start the notebook to enter the Start-up Menu.  Insert the Rescue CD.  Select Boot options ( usually f9 ), use the arrow keys to select the CD/DVD drive and hit enter.  You may also get a prompt to 'Press any key to continue' - do this if asked.
    When loaded, select Repair Your Computer and choose the Command Prompt.  When this loads, enter the following commands and hit enter after each one - include spaces as shown.
    Bootrec.exe
    bcdedit /export C:\BCD_Backup
    c:
    cd boot
    attrib bcd -s -h -r
    ren c:\boot\bcd bcd.old
    bootrec /RebuildBcd
    bootrec /fixmbr
    bootrec /fixboot
    Remove the Rescue CD and try rebooting the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Can't boot into windows 7 anymore......

    Hi all, I have a Mac mini late 2012 with windows7 installed through bootcamp5. It has worked flawless until recently, now I can't boot into windows anymore. I've checked in finder and the bootcamp partition is present and also all the files. Before that, I did have some trouble with my LaCie 2big thunderbolt hdd, it kept on saying I had to reformat one of the discs in the drive, but only when used in windows, in OSX there was/are no problems reading the hdd .......
    Any idea of how I can make windows bootable again?, do I really have to make a fresh install of windows to make it work??
    Any help is very much appreciated
    Kindly
    Jan

    You might want to visit the Boot Camp forum where the Boot Camp gurus hang out. https://discussions.apple.com/community/windows_software/boot_camp

  • Can't get past gray screen for OS X but will boot into Windows partition.

    Hi- I am really desperate for help here.
    Restarted my computer this evening when Front Row wasn't able to find the files on my external HD. When it booted it went directly in to my Windows Boot Camp partition. So I restarted, held down 'option', choose my OS X disk and just got the spinning sun icon on the gray screen for several minutes. It then booted into Windows again. If I hold down 'option' again I can cut it off before it gets to Windows.
    I've tried booting into a cloned HD via FireWire and same results.
    I've tried booting with the install disk (c key held down) and it won't recognize it.
    I've tried Safe Mode (shift key) - same.
    I've booted into Single User and done fsck and and it says everything is ok.
    - BUT I did notice it says further up- "BSD: rootdisk0s2, major 14, minor 2". Are these errors? If so why didn't fsck find and fix them.
    I've tried resetting PRAM and SMC.
    The only thing I have done out of the ordinary was an hour before I was trying to get some of my files on my wife's laptop and went into permissions on my HD and changed "Everyone" Priviledges to Read (or maybe it was Read and Write) then chose "apply to enclosed items". This change took about 20 minutes.
    The computer is, of course, just over a year old and has worked perfectly up until now.
    Someone-Please!!!

    Tried that and it just doesn't read the disk. I've booted it with the disc already in and held Shift and also tried it with "C". The same for putting the disc in just as it boots up.
    I went into Single User mode again and compared the text against what shows up on the laptop. Their are a few differences. At the very beginning of the iMac text there is:
    npvhash=4095
    hi mem tramps at 0xffe00000
    PAE Enabled
    64 bit mode enabled
    -then-
    Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpicomponents; use only one style.
    Extension "com.apple.driver.AppleIntelCPUPowerManagement" has immediate dependencies on both com.apple.kernel and com.apple.kpicomponents; use only one style.
    -then- after "MAC Framework successfully initialized" comes this three times...
    Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpicomponents; use only one style.
    These are really the only major differences that I can see in the Single Mode screen.
    I also have tried booting from the Firewire drive clone on the laptop but it is not an available option for booting. The disk partitions mount but have a lock in the corner and say they cannot be opened because I have insufficient access privileges.

  • FreeBSD didn't install, i can no longer boot into Windows

    I unsuccessfully installed FreeBSD and I can no longer boot into an OS from the HD.  I attempted to install BSD onto the "G" drive below however the the install gave me some kind of storage error and I can no longer boot into Windows.  While going through the BSD installation process I opted to NOT install a boot manager (I incorrectly assumed that this would leave my existing boot manager intact).
    Here's how I was partitioned pre-FreeBSD (these are all partitions on the same SATA 80GB drive):
    C:\ Windows ME
    D:\ Windows XP sp1a
    E:\ Windows XP-64 beta
    F:\ Longhorn 64 preview
    [G]:\ unpartitioned 4GB
    [F]:\ uformatted 4GB
    H:\ NTFS Storage
    I:\ FAT32 Storage
    Before I attempted to install BSD, I used c:\boot.ini as my boot manager.  
    Now when I try to boot it says:
    Code: [Select]
    Invalid Partition
    Invalid Partition
    No /boot/loader
    FreeBSD/i386 boot
    Default: 0:ad(0,a)/kernel
    boot:
    Invalid Partition
    No /kernel
    FreeBSD/i386 boot
    Default: 0:ad(0,a)/kernel
    boot: _ 
    Has anyone else ever had this happen to them?  If so how can I reenable booting into Windows?

    Hi
    You got a prob I think, if you can boot a windows, MSconfig, startup options might restore the boot files.Only other thing is to try and either load a new windows and let it setup a boot file, or perhaps a win98 startup disk, and fdisk, then set active partiton, which will set an MBR.  But that would leave a load of work to do, I think I'd opt for an install of XP, and let it repair existing installation, and make a new boot file.
    Hope you don't need the info on disks.  If you do, I would install another HDD, load XP, then copy original Disk to save place.
    Good luck
    Jocko

  • Can't boot into Windows??

    Hi!! This is my theory about not being able to boot into windows. If you have made a system repair disc like you should have made on day one; and your PC will not boot with the system repair CD, you probably have some serious hardware problems.
    I'm going to steal this reply from cee64 again. A system repair CD can be made from any PC that is running W7 ect.
    Hi I'm going to steal this reply from cee64. I'm sure he won't mind!
    "It is quite possibly the hard drive is failing or has failed.  The reason you can't get into the bios or boot from a CD/DVD is because the bios it hanging trying to recognize the hard drive.  Try removing the hard drive and see if it will allow you into the bios or boot to a CD/DVD.  If it does, go the hard drive manufacturer's support site, downlod their hard drive diagnostic ISO image, then use the burn from image option to create the self booting cd, then boot to it and run the most exhaustive diagnosis on it if it will boot.  If you can't get it to boot to the diagnostic disk while the hard drive is installed you'll more than likely need to replace the hard drive. 
    If it won't get you into the bios or boot to a CD/DVD with the hard drive out of the system you need to try reseating the ram.  If that doesn't help you probably have a bad motherboard.  In this case it would more than likely be cheaper to just replace the laptop than fix it."
    http://www.dummies.com/how-to/content/how-to-use-a-system-repair-disc-to-restore-windows.html
    If Seatools found your HD good, then you have a good chance of using the recovery disks or the recovery partion to restore you back to factory setting. If that fails, you may be down to a bad motherboard. I know of no program to test the MB. You can use memtest 86 to test your Ram. I think it tests some parts of your MB, but can't say that for sure.
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

    Hi! I stole this reply from Jerry Edited One link, because it failed to open
    Let's start here. The spec above says your machine came with 32-bit Windows Vista. Have you changed it?
    We need to reach the recovery environment. Can you do it this way?
       http://windows.microsoft.com/en-US/windows-vista/What-happened-to-the-Recovery-Console
    If not, burn a system repair disc from this download (assuming 32-bit Windows).
       Download Windows Vista Recovery Environment ISO X86 version (32 bit)
    -Jerry
    I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward.

Maybe you are looking for