Can only connect 1 computer at a time after changing from DSL to Cable.

I have 2 laptops using Airport cards, and one Tower connected via ethernet to Airport basestation. With DSL no problem (DSL required PPPoE). With cable I can use internet assistant and restart each device and finally connect, but only one at a time. I'll set up one, then have to reboot everything to set up the next computer and lose the connection with the first. Cable needs to use DHCP it seems.
To get it to work with the new modem I had to change the base stations configuration from distributing IP addresses to not distributing IP addresses. Methinks this has something to do with my not being able to get more than one computer working at a time.
Any help would be appreciated. Have to iBooks, and a G4 tower. 2 running OSX10.4.10, and one wtih 10.5.2.

Figured it out after about an hour talking first with Comcast, then Apple support. AEBS was not acting as router at all, and had been put in bridge mode.
Easy solution once this was realized was to do hard reset (I thought I was doing this by unplugging the AEBS, but had to actually find and press the hard reset button) which reset all the settings at which point setup was pretty easy. Made sure it was not in bridge mode, did an automatic setup using the Airport utility, and voila. Everything including my new iPod could connect.
Now if I could only have the 6 hours back that I spent going around in circles in bridge mode.

Similar Messages

  • Can only connect 2 Macs at a time to Airport/TC

    Just what the title says, I can only connect 2 devices at a time. If I want to connect a third someone needs to get off their Mac.

    This happens usually because the TC is in the wrong mode..
    Go to the airport utility and check if the TC is in router mode, ie DHCP and NAT.. if not place it in that model and tell me what happens.
    You need to give loads more info.
    Type of broadband and actual modem / router supplied is a good start.

  • Can only connect one user at a time via VPN?

    Hi, long-term Mac user but new to OS X Server. Dug thru the forums quite a bit but couldn't find an answer to this one - hopefully I wasn't searching with the wrong keywords.
    Installed OS X Server 10.6 on a MacBook (white, 1 generation back) at the office. Sits behind an Airport Extreme, which is connected to Comcast. Other machines at the office are NOT routed through the Server, but rather connect directly to the Airport Extreme for internet access. I've set up server.mydomainname.com to point to our Comcast address, and I am able to connect via VPN to the server without any problems, and access the server using the server.mydomainname.com address which I pointed to my Comcast IP address, as long as I check "Send all traffic over VPN connection" on my client.
    However, when I'm logged in via VPN on one computer, and then log in via VPN on another computer (with the same UID or a different one), the first one loses all connectivity through the VPN - it's as if it had been logged off.
    In Server Admin, under the Settings|Network tabs, I have Computer Name set up as "theserver", and Local Hostname as "theserver" (so I can access via theserver.private). VPN is set up to enable L2TP over IPsec, sharing ranges 10.0.1.200 thru 10.0.1.220; no load balancing, no PPTP. Client DNS servers is set to 10.0.1.29.
    Any ideas as to why I can only connect with one client at a time?

    Thanks. I didn't see anything interesting, but then again I'm not up on VPN details. Here's the scenario:
    First, I logged in as "user1", and I can use the VPN.
    Then, I logged in as "user2", and I can use the VPN with user2, but user1 is no longer able to do anything over the VPN.
    Then I hung up with user2, but user1 still can't see anything over the VPN.
    Then I hung up and reconnected with user1, and user1 can use the VPN again.
    Here's part of the log for this activity. I've replaced potentially identifying info with "XYZ" for safety. Appreciate any thoughts on this!
    Tue Oct 19 07:33:08 2010 : L2TP received ICCN
    Tue Oct 19 07:33:08 2010 : L2TP connection established.
    Tue Oct 19 07:33:08 2010 : using link 1
    Tue Oct 19 07:33:08 2010 : Using interface ppp1
    Tue Oct 19 07:33:08 2010 : Connect: ppp1 <--> socket[34:18]
    Tue Oct 19 07:33:08 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:08 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:08 2010 : lcp_reqci: returning CONFACK.
    Tue Oct 19 07:33:08 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:08 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:08 2010 : sent [LCP EchoReq id=0x0 magic=XYZ]
    Tue Oct 19 07:33:08 2010 : sent [CHAP Challenge id=0x18 <XYZ>, name = "myserver.private"]
    Tue Oct 19 07:33:08 2010 : rcvd [LCP EchoReq id=0x0 magic=XYZ]
    Tue Oct 19 07:33:08 2010 : sent [LCP EchoRep id=0x0 magic=XYZ]
    Tue Oct 19 07:33:08 2010 : rcvd [LCP EchoRep id=0x0 magic=XYZ]
    Tue Oct 19 07:33:08 2010 : rcvd [CHAP Response id=0x18 <XYZ>, name = "user2"]
    Tue Oct 19 07:33:08 2010 : sent [CHAP Success id=0x18 "S=XYZ M=Access granted"]
    Tue Oct 19 07:33:08 2010 : CHAP peer authentication succeeded for user2
    Tue Oct 19 07:33:08 2010 : DSAccessControl plugin: User 'user2' authorized for access
    Tue Oct 19 07:33:08 2010 : sent [IPCP ConfReq id=0x1 <addr 10.0.1.29>]
    Tue Oct 19 07:33:08 2010 : sent [ACSCP ConfReq id=0x1]
    Tue Oct 19 07:33:08 2010 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
    Tue Oct 19 07:33:08 2010 : ipcp: returning Configure-NAK
    Tue Oct 19 07:33:08 2010 : sent [IPCP ConfNak id=0x1 <addr 10.0.1.213> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:33:08 2010 : rcvd [IPV6CP ConfReq id=0x1 <addr XYZ>]
    Tue Oct 19 07:33:08 2010 : Unsupported protocol 0x8057 received
    Tue Oct 19 07:33:08 2010 : sent [LCP ProtRej id=0x2 80 47 01 01 00 0f 01 0a 02 1b 63 ff fe a0 dd da]
    Tue Oct 19 07:33:08 2010 : rcvd [ACSCP ConfReq id=0x1 <ms-dns1 0.0.0.1> <ms-dns1 0.0.0.1>]
    Tue Oct 19 07:33:08 2010 : sent [ACSCP ConfRej id=0x1 <ms-dns1 0.0.0.1>]
    Tue Oct 19 07:33:08 2010 : rcvd [IPCP ConfAck id=0x1 <addr 10.0.1.29>]
    Tue Oct 19 07:33:08 2010 : rcvd [ACSCP ConfAck id=0x1]
    Tue Oct 19 07:33:08 2010 : rcvd [IPCP ConfReq id=0x2 <addr 10.0.1.213> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:33:08 2010 : ipcp: returning Configure-ACK
    Tue Oct 19 07:33:08 2010 : sent [IPCP ConfAck id=0x2 <addr 10.0.1.213> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:33:08 2010 : ipcp: up
    Tue Oct 19 07:33:08 2010 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: 10.0.1.29), current interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
    Tue Oct 19 07:33:08 2010 : found interface en0 for proxy arp
    Tue Oct 19 07:33:08 2010 : local IP address 10.0.1.29
    Tue Oct 19 07:33:08 2010 : remote IP address 10.0.1.213
    Tue Oct 19 07:33:08 2010 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: 10.0.1.29), current interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
    Tue Oct 19 07:33:08 2010 : rcvd [ACSCP ConfReq id=0x2 <ms-dns1 0.0.0.1>]
    Tue Oct 19 07:33:08 2010 : sent [ACSCP ConfAck id=0x2 <ms-dns1 0.0.0.1>]
    Tue Oct 19 07:33:08 2010 : sent [ACSP data <payload len 26, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name XYZ>]
    Tue Oct 19 07:33:08 2010 : rcvd [IP data <src addr 10.0.1.213> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
    Tue Oct 19 07:33:08 2010 : sent [IP data <src addr 10.0.1.29> <dst addr 10.0.1.213> <BOOTP Reply> <type ACK> <server id 0x0a00011d> <domain name "XYZ">]
    Tue Oct 19 07:33:08 2010 : rcvd [ACSP data <payload len 0, packet seq 0, CI_DOMAINS, flags: ACK>]
    Tue Oct 19 07:33:34 2010 : rcvd [LCP TermReq id=0x2 "User request"]
    Tue Oct 19 07:33:34 2010 : LCP terminated by peer (User request)
    Tue Oct 19 07:33:34 2010 : ipcp: down
    Tue Oct 19 07:33:34 2010 : l2tpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.29), deleted interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
    Tue Oct 19 07:33:34 2010 : sent [LCP TermAck id=0x2]
    Tue Oct 19 07:33:34 2010 : l2tpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.29), deleted interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
    Tue Oct 19 07:33:34 2010 : L2TP received CDN
    Tue Oct 19 07:33:34 2010 : Connection terminated.
    Tue Oct 19 07:33:34 2010 : Connect time 0.5 minutes.
    Tue Oct 19 07:33:34 2010 : Sent 777000 bytes, received 105388 bytes.
    Tue Oct 19 07:33:34 2010 : L2TP disconnecting...
    Tue Oct 19 07:33:34 2010 : L2TP disconnected
    2010-10-19 07:33:34 PDT --> Client with address = 10.0.1.213 has hungup
    Tue Oct 19 07:33:50 2010 : rcvd [LCP TermReq id=0x3 "User request"]
    Tue Oct 19 07:33:50 2010 : LCP terminated by peer (User request)
    Tue Oct 19 07:33:50 2010 : ipcp: down
    Tue Oct 19 07:33:50 2010 : sent [LCP TermAck id=0x3]
    Tue Oct 19 07:33:50 2010 : l2tpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.29), deleted interface setting (name: ppp0, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.214).
    Tue Oct 19 07:33:50 2010 : L2TP received CDN
    Tue Oct 19 07:33:50 2010 : Connection terminated.
    Tue Oct 19 07:33:50 2010 : Connect time 3.5 minutes.
    Tue Oct 19 07:33:50 2010 : Sent 625383 bytes, received 225586 bytes.
    Tue Oct 19 07:33:50 2010 : L2TP disconnecting...
    Tue Oct 19 07:33:50 2010 : L2TP disconnected
    2010-10-19 07:33:50 PDT --> Client with address = 10.0.1.214 has hungup
    2010-10-19 07:33:59 PDT Incoming call... Address given to client = 10.0.1.216
    Tue Oct 19 07:33:59 2010 : Directory Services Authentication plugin initialized
    Tue Oct 19 07:33:59 2010 : Directory Services Authorization plugin initialized
    Tue Oct 19 07:33:59 2010 : L2TP incoming call in progress from 'XYZ'...
    Tue Oct 19 07:33:59 2010 : L2TP received SCCRQ
    Tue Oct 19 07:33:59 2010 : L2TP sent SCCRP
    Tue Oct 19 07:33:59 2010 : L2TP received SCCCN
    Tue Oct 19 07:33:59 2010 : L2TP received ICRQ
    Tue Oct 19 07:33:59 2010 : L2TP sent ICRP
    Tue Oct 19 07:33:59 2010 : L2TP received ICCN
    Tue Oct 19 07:33:59 2010 : L2TP connection established.
    Tue Oct 19 07:33:59 2010 : using link 0
    Tue Oct 19 07:33:59 2010 : Using interface ppp0
    Tue Oct 19 07:33:59 2010 : Connect: ppp0 <--> socket[34:18]
    Tue Oct 19 07:33:59 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:59 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:59 2010 : lcp_reqci: returning CONFACK.
    Tue Oct 19 07:33:59 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:59 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:59 2010 : sent [LCP EchoReq id=0x0 magic=XYZ]
    Tue Oct 19 07:33:59 2010 : sent [CHAP Challenge id=0xf1 <XYZ>, name = "myserver.private"]
    Tue Oct 19 07:33:59 2010 : rcvd [LCP EchoReq id=0x0 magic=XYZ]
    Tue Oct 19 07:33:59 2010 : sent [LCP EchoRep id=0x0 magic=XYZ]
    Tue Oct 19 07:33:59 2010 : rcvd [LCP EchoRep id=0x0 magic=XYZ]
    Tue Oct 19 07:33:59 2010 : rcvd [CHAP Response id=0xf1 <XYZ>, name = "user1"]
    Tue Oct 19 07:34:00 2010 : sent [CHAP Success id=0xf1 "S=XYZ M=Access granted"]
    Tue Oct 19 07:34:00 2010 : CHAP peer authentication succeeded for user1
    Tue Oct 19 07:34:00 2010 : DSAccessControl plugin: User 'user1' authorized for access
    Tue Oct 19 07:34:00 2010 : sent [IPCP ConfReq id=0x1 <addr 10.0.1.29>]
    Tue Oct 19 07:34:00 2010 : sent [ACSCP ConfReq id=0x1]
    Tue Oct 19 07:34:00 2010 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
    Tue Oct 19 07:34:00 2010 : ipcp: returning Configure-NAK
    Tue Oct 19 07:34:00 2010 : sent [IPCP ConfNak id=0x1 <addr 10.0.1.216> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:34:00 2010 : rcvd [IPV6CP ConfReq id=0x1 <addr XYZ>]
    Tue Oct 19 07:34:00 2010 : Unsupported protocol 0x8057 received
    Tue Oct 19 07:34:00 2010 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 02 1b 63 ff fe 99 35 cb]
    Tue Oct 19 07:34:00 2010 : rcvd [LCP ProtRej id=0x2 82 35 01 01 00 04]
    Tue Oct 19 07:34:00 2010 : rcvd [IPCP ConfAck id=0x1 <addr 10.0.1.29>]
    Tue Oct 19 07:34:00 2010 : rcvd [IPCP ConfReq id=0x2 <addr 10.0.1.216> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:34:00 2010 : ipcp: returning Configure-ACK
    Tue Oct 19 07:34:00 2010 : sent [IPCP ConfAck id=0x2 <addr 10.0.1.216> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:34:00 2010 : ipcp: up
    Tue Oct 19 07:34:00 2010 : found interface en0 for proxy arp
    Tue Oct 19 07:34:00 2010 : local IP address 10.0.1.29
    Tue Oct 19 07:34:00 2010 : remote IP address 10.0.1.216
    Tue Oct 19 07:34:00 2010 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: 10.0.1.29), current interface setting (name: ppp0, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.216).
    Tue Oct 19 07:34:00 2010 : rcvd [IP data <src addr 10.0.1.216> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
    Tue Oct 19 07:34:00 2010 : sent [IP data <src addr 10.0.1.29> <dst addr 10.0.1.216> <BOOTP Reply> <type ACK> <server id 0x0a00011d> <domain name "XYZ">]

  • WRT45G: can only connect one pc at the time to internet, cannot login to router setup

    Hello,
    I don't get this. The complete network worked fine for ... years? After a call with the ISP about a general/different issue, we can now only connect one pc at the time to internet. (We were asked to take out cables and we've put them back).
    I've been trying and searching for an answer for hours.
    problem:
    We can only connect through the router to internet with only one pc at the time (the first pc we connect after starting up the router).
    Also we cannot get into the setup menu of the router at 192.168.1.1
    We've been trying to reset the modem for 10, 30 seconds.
    Auto resolve IP/DNS. DHCP is enabled.
    I also remembered that I pushed the SES button, it turned from orange to flashing bluish. I never knew aboutthis function, nor it is mentioned in the manual I downloaded. Now this SES indicator is off.
    Also WLAN and DMZ led are off.
    I downloaded EasyLink_Connect.exe, went through the setup. It recognises there's internet connection, but stops and says: cisco does not support this modem.
    Temp. replacing this WRT45G modem with another one did not resolve the issue.
    I have no clue what went wrong, what we did wrong, and how we can resolve this issue? Please help! Thanks
    Message Edited by Brammm on 11-27-2008 03:13 PM

    Okay! 
    1.  (results when having assigned a static IP) :
     Windows IP-configuratie
             Primair DNS-achtervoegsel. . . . .:
            Knooppunttype: . . . . . . . . . .: onbekend     (unknown)
            IP-routering ingeschakeld. . . . .: nee      (no)
            WINS-proxy ingeschakeld . . . . . : nee    (no)
     Ethernet-adapter LAN-verbinding:
             Verbindingsspec. DNS-achtervoegsel:
            Beschrijving . . . . . . . . . . .:
              VIA Compatable Fast Ethernet Adapter
            Fysiek adres. . . . . . . . . . . : 00-16-17-CE-D5-40
            DHCP ingeschakeld:. . . . . . . . : nee    (no)
            IP-adres. . . . . . . . . . . . . : 192.168.1.20
            Subnetmasker. . . . . . . . . . . : 255.255.255.0
            Standaardgateway. . . . . . . . . : 192.168.1.1
            DNS-servers . . . . . . . . . . . : 192.168.1.1
     (results without having assigned a static IP: automatic config.) :  
     Ethernet-adapter LAN-verbinding: 
            Verbindingsspec. DNS-achtervoegsel:
            Beschrijving . . . . . . . . . . .:
              VIA Compatable Fast Ethernet Adapter
            Fysiek adres. . . . . . . . . . . : 00-16-17-CE-D5-40
            DHCP ingeshakeld. . . . . . . . . : ja     (yes)
            Autom. configuratie ingeschakeld. : ja       (yes)
            IP-adres. . . . . . . . . . . . . : 84.30.99.32       
    Subnetmasker. . . . . . . . . . . : 255.255.254.0       
    Standaardgateway. . . . . . . . . : 84.30.98.1       
    DHCP-server . . . . . . . . . . . : 213.51.144.90
            DNS-servers . . . . . . . . . . . : 212.54.40.25
                                                212.54.35.25
    2.  I do have another router, when I try that one, the problem we have remains. So that's a bit strange to me. That one is supposed to be working.
    Does this SES function configure anything other than the modem? So, does it alter PC configurations? I have no clue.   We even start to wonder whether the ISP is able to set up their internet in a way that unables us to make use of a router? That would be ridiculous
    Message Edited by Brammm on 11-30-2008 04:03 AM

  • Computer won't CONNECT to c4480 after move from DSL to cable

    I have a Photosmart C4480 operating under Windows 7  Home Premium 64bit
    It worked fine I could print/scan and read and write to a card
    I moved so disconneted it packed it. When I got to the new place set up the computer
    hooked up the USB cable and connected it between the printer and the computer.
    When I tried to print nothing happened. I Opened Windows Explored and discoverd
    that the computer could not see the printer I checked the cable thats Ok tried reinstalling drivers
    when it finished it said "connect USB cable" meaning that it could not see the printer.
    Other than that there were no error messages
    The only thing that changed was at the old location I was using DSL now I am on cable
    Do I need a new printer?
    This question was solved.
    View Solution.

    BAC0296, if I understand your issue correctly, you recently moved and now your USB connected printer is no longer recognized by the computer. Is this correct? If so, don't worry about moving from DSL to cable, it shouldn't effect a USB connection. 
    To start, I would unplug the USB cable from the printer and the computer. Then go to your Devices and Printers folder and delete the copies of the printer there. We're going to start fresh from here. 
    Once they are all removed, go to your start menu and then to All Programs and find the "HP" folder. In that folder there shold be another folder for your c4480. In that folder there should be an item listed for the printer setup and installation. Go through this process and when you are prompted plug the USB cable into the printer and the comptuer. Finish the installation from here. 
    Let me know if this helps! 

  • Can't access PIX 501 after switch from dsl to cable

    Hi--
    I have two small offices and recently switched from dsl to cable internet. the two pix501 f/w units worked fine on dsl, but for the life of me I cannot even access the units now from the inside as I was able to do before when on dsl signal. I know I need to change the configuration from PPPoe to DHCP, but I can't get access to do it.
    Any suggestions?
    I believe I have 6.2 software, but I'm not sure. The Inside address is 10.8.6.1 now.
    thanks--jb

    Jorge--
    I did have the Pix connected to router, 192 168.1.1 for convenience, so I could still get internet wirelessly without having to do lots of wire unplugging and plugging.
    I have since changed to topology of comcast modem connected directly to pix which in turn connects directly to laptop.
    In this configuration, laptop pings 10.8.6.1 ok, but pix has no connectivity to comcast.
    When laptop connected directly to comcast modem,(ie pix removed) the ipconfig /all from laptop reads the following from comcast:
    ip 71.192.7.130
    mask 255.255.252.0
    DG 72.192.11.1
    DHCP server 68 87 71 52
    DNS 68 87 71 226 and 68 87 73 242
    Response to pix# show route | inc 0.0.0.0 is nothing.
    For reference, here is show run
    pixMDC# show run
    : Saved
    PIX Version 6.3(5)
    interface ethernet0 auto
    interface ethernet1 100full
    nameif ethernet0 outside security0
    nameif ethernet1 inside security100
    enable password PVSASRJovmamnVkD encrypted
    passwd PVSASRJovmamnVkD encrypted
    hostname pixMDC
    domain-name keene.com
    fixup protocol dns maximum-length 512
    fixup protocol ftp 21
    fixup protocol h323 h225 1720
    fixup protocol h323 ras 1718-1719
    fixup protocol http 80
    fixup protocol rsh 514
    fixup protocol rtsp 554
    fixup protocol sip 5060
    fixup protocol sip udp 5060
    fixup protocol skinny 2000
    fixup protocol smtp 25
    fixup protocol sqlnet 1521
    fixup protocol tftp 69
    names
    access-list outside_access_in permit icmp any any echo-reply
    access-list outside_access_in permit icmp any any source-quench
    access-list outside_access_in permit icmp any any unreachable
    access-list outside_access_in permit icmp any any time-exceeded
    pager lines 24
    mtu outside 1500
    mtu inside 1500
    ip address outside dhcp setroute
    ip address inside 10.8.6.1 255.255.255.0
    ip audit info action alarm
    ip audit attack action alarm
    pdm location 10.0.0.0 255.0.0.0 inside
    pdm logging informational 100
    pdm history enable
    arp timeout 14400
    global (outside) 1 interface
    nat (inside) 1 10.8.6.0 255.255.255.0 0 0
    access-group outside_access_in in interface outside
    timeout xlate 0:05:00
    timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00
    timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00
    timeout sip-disconnect 0:02:00 sip-invite 0:03:00
    timeout uauth 0:05:00 absolute
    aaa-server TACACS+ protocol tacacs+
    aaa-server TACACS+ max-failed-attempts 3
    aaa-server TACACS+ deadtime 10
    aaa-server RADIUS protocol radius
    aaa-server RADIUS max-failed-attempts 3
    aaa-server RADIUS deadtime 10
    aaa-server LOCAL protocol local
    http server enable
    http 10.0.0.0 255.0.0.0 inside
    http 10.8.6.0 255.255.255.0 inside
    no snmp-server location
    no snmp-server contact
    snmp-server community public
    no snmp-server enable traps
    floodguard enable
    telnet 10.8.6.0 255.255.255.0 inside
    telnet timeout 5
    ssh timeout 5
    console timeout 0
    dhcpd address 10.8.6.2-10.8.6.33 inside
    dhcpd dns 151.203.0.84 151.202.0.84
    dhcpd lease 3600
    dhcpd ping_timeout 750
    dhcpd auto_config outside
    vpnclient server 10.8.6.0 10.0.0.0
    vpnclient mode client-mode
    vpnclient vpngroup fnd password ********
    vpnclient username fnd password ********
    vpnclient enable
    terminal width 80
    Cryptochecksum:6ca15e834dc867c6f12b46b2bd28a4a8
    : end
    pixMDC#
    pixMDC#
    pixMDC#
    pixMDC# ping 71.192.7.130
    No route to host 71.192.7.130.
    Usage: ping [if_name]
    pixMDC#
    It appears that the pix is not seeing the comcast dhcp signal and latching onto it.
    Thanks,
    Jeffrey

  • Help!!! i updated itunes and now im trying to sync some videos from itunes snd it keeps giving me that you earase and sync you can only use one computer at a time

    okay so i updated itunes and now it wont let me sync anything it keeps giving me that "you can only be synced with one computer at a time erase and sync"  but this is the only computer ive ever used!!!  pleeeease help!!
    <Edited By Host>

    Re: That garbage is unreadable.
    If you really want help, stop messing with the fonts and post so that others can read and offer suggestions.
    Or better yet... try a search, I'm certain you'll find a solution to whatever issue you're experiencing.
    I have found that many times it is the things that make you most angry that push you to action. This was the case here. Thank you for causing me to get so angry that I found the answer myself.

  • Can't get router working after switching from DSL to Cable broadband???

    I have a WRT54G v.5
    I just switched from dsl service to cable broadband. I can't get my router to work. I hooked it back up just as the dsl modem used to be. there is an ethernet cable that goes from the cable modem to the router. then an eithernet cable that goes from the router to the computer. this does not work. If I just take the router out of the loop and run an eithernet cable straight from the cable modem to the computer it works fine. so the cable internet service is working fine up to the modem. The router is the problem. I have restarted both the computer and the router. so that rules that out. can you help me?

    Open the setup page of the router by launching an Internet Explorer Browser and type the address bar, 192.168.1.1 and press enter. When it prompts for the username and password, leave the username field empty and provide password as admin and click on ok.On the main setup page the ""Internet Connection Type"" should be on ""Obtain IP Automatically - DHCP “. Click on the Save Settings button.Now click on the sub tab ""MAC address clone"".- Click on enable.Click Clone & click save settings
    Check WAN Ip on Status page of router .... If getting Valid Ip .... try going online...If not ... power cycle for 4-5 minutes & then, try going online.

  • 2 iPads, but can only connect one iPad at a time to my home network.  Is this a known issue with Mac/iPads in general?

    At home I have a HP PC, netbook and Sony laptop with no connection issues.  Last year I bought an iPad 1 for my wife.  This year I bought an iPad 2 for myself.  However, only one iPad can connect to the wifi home network at a time. If I am using the iPad2 then the iPad1 fails to connect to the internet.  if the iPad1 is being used then the iPad2 cannot connect.   I tried resetting iPad network settings for both, reset router, and updated both iPads to latest software/firmware yesterday.  Right now the only iPad that shows any connection is the iPad1.  The iPad2 does not see the home network or any other outside network.  Any suggestions or ideas on how to resolve this?  It is odd the network issues only affect the iPad's.

    @dananova,
    It sounds like you need to either increase the number of dynamic IP addresses your router will hand out or change some of your devices to static IP addresses. 
    Check the router manual on how to change the dynamic IP range of your router.  If you don't have a manual, you can go to Belkin's website and download it.
    To change the IP address of your iPads to static addresses, go to Settings > Wi-Fi and tap the ">" next to the name of your wireless network.  DHCP should be highlighted.  Write down the all the settings on the screen. Next tap the Static button.  Enter the exact same information that you copied from the DHCP screen with the exception of the last 3 digits of the IP address.  Enter a new 3 digit number in this spot.  Generally the original IP address will end with a low number such as 009, so pick a number that is not that low but less than 255.  I would suggest a range of 240 to 250, unless the original IP range falls near this range.  Also make sure you use a different 3 digits for each device you set to use a static IP address.

  • Just updated to Firefox 8, can only connect 1 User at a time, how can I fix this so both users can connect to Firefox at the same time??

    I have just upgraded to Firefox 8. I have 2 user accounts on my computer. Since the upgrade, only 1 user can access Firefox at a time. I am able to use IE on 1 and Firefox on the other. I have to close Firefox on 1 user before I can open it on the 2nd.

    I also have gone back to V 7, which fixed the issue. I have stopped the automatic updates so the issue doesn't hapen again.

  • I got a new time capsule and can only connect 1 device at a time?

    please help

    You have the TC in bridge mode..
    ie on the network tab it says.. off (bridge mode)..
    Change this to dhcp + NAT mode..
    Be aware you might then have more issues.. depending on the setup.. particularly if you have a cable modem you will need to power down the modem for 30min. maybe less.. maybe more.
    More network info helps if that simple bit didn't work.. we cannot work with nothing.. Creation ex nihilo is only for divinity.. for ordinary humans we need something to start from.

  • Can only connect to Internet from one computer at a time on network

    I have a 2 computer network in my office networked with an Asante 10/100 hub. The computers are a iMac 24 (Intel) and an old G4 (PCI). The network has worked fine until just recently. Now, I can only connect to the Internet with one computer at a time...(DSL connection). I checked cables, ports, etc, and I'm wondering if this is a 10.4.9 issue. Coincidentally, I noticed that I am not able to access the Internet via Win XP using Parallels which also worked fine up until recently. I checked with the ISP (AT&T) who confirmed that all is OK on their end. Anyone have similar problem? Could OS X 10.4.9 be the culprit? Any help on this will be much appreciated. Thanks.
    iMac 24   Mac OS X (10.4.9)   2G RAM; NVIDIA GeForce 7600 GT 256

    I'd consider that a 3 computer network, Parallels being a virtual machine would alias the ethernet interface and need its own IP address. That may or may not have anything to do with your problem. Actually, the way you've described things, it sounds like a lot has to do with your contract with ATT. Is there a routing device at your end?
    The only way 10.4.9 could be the culprit would be if it were the routing device.
    -Phil

  • HT4199 Every time I introduce the WPA2 passwords I can´t connect. I can only connect to open wi fi networks? Does anyone know why? Thanks

    Every time I introduce the WPA2 passwords I can´t connect. I can only connect to open wi fi networks? Does anyone know why? Thanks

    Some users with various Wi-Fi connection problems have reported that they were given the following instructions by Apple Support, sometimes with success. I can't vouch for this procedure myself. After completing the procedure, you'll have to recreate all your settings in the Network preference pane. Make sure you know how to do that before you begin. Taking screenshots of the preference pane may be helpful.
    Step 1
    Back up all data.
    Triple-click the line below on this page to select it:
    /Library/Preferences/SystemConfiguration
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 2
    Reset the System Management Controller

  • Can only connect to enterprise wifi the first time each day, then does not reconnect and got the "Associati​on Failed" error

    To save battery, I leave my wifi off when the TP's screen is locked.  At home, my TP has no problem reconnecting to wifi after the screen is unlocked.  However, at work, which uses enterprise wifi, I can only connect the first time.  If I lock the screen and then unlock it (causing the wifi to turn off and on again) then the TP will not reconnect and I would get the "Association failed" error over and over again.  If I were to turn the TP off and on again, I would still get the same error.  Here's the strange part, if I come in work the next day, it would be able to connect to the wifi.  If I were to leave the wifi on all the time, it would not disconnect even if I lock the screen.  Now if I were to turn off the wifi and then turn it on again, the TP would not reconnect.  So it seems like the TP can only connect the first time each day....very strange...and frustrating.
    Post relates to: HP TouchPad (WiFi)

    Scimmia is right.  But you AcousticBruce are still very wrong.  You claim there were no error messages.  Yet after much proding and denial you finally provide small portions of error messages which fully identify the problem and can be found in many other posts in these forums.  Yet still, you haven't actually provided full output - instead you paraphrased the output after a couple of "//" symbols.
    If you don't give us the actual output we can't help - except in this case the error is so common we could very easily help.  So could the wiki page on wpa_supplicant if you had read it, as your problem is explictly listed there in a "NOTE" box.  But more importantly if you are reluctant to give us actual output we will not want to help you.
    This issue would have been solved instantly if you would have provided the actual output instead of lying about it.
    The relevant wiki pages:
    https://wiki.archlinux.org/index.php/WP … passphrase
    https://wiki.archlinux.org/index.php/He … er_or_root
    And the related forums posts found after just a quick search of that error message that you finally provided:
    https://bbs.archlinux.org/viewtopic.php?id=167244
    https://bbs.archlinux.org/viewtopic.php?id=184824
    https://bbs.archlinux.org/viewtopic.php?id=178909
    https://bbs.archlinux.org/viewtopic.php?id=190097
    https://bbs.archlinux.org/viewtopic.php?id=191351
    https://bbs.archlinux.org/viewtopic.php?id=191964
    Last edited by Trilby (2015-05-18 11:08:44)

  • When downloading i can only download one link at a time per window. i used to be able to download six links at a time per page. how do i go back to this?

    got a new laptop. unsure of firefox verson on old as the computer quit taking a charge.
    but essentially on my old laptop if a window had six downloadable links i would be able to download all six at once. now i can only download one link at a time. this is very annoying. i do not believe it is an issue with the new laptop itself as it is a highend toshiba.

    Hello cherokeeguy, go to [http://kb.mozillazine.org/About:config about:config] find [http://kb.mozillazine.org/Network.http.max-persistent-connections-per-server network.http.max-persistent-connections-per-server] right-click on it, select modify and put a greater value, try 10 or 16, click ok to save it, exit firefox and restart it.
    BUT this normally should not happen !
    check it also in [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Safe Mode], select '''''"Start in Safe Mode" '''''and see if this happen again, if not see: [https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]
    also try to update to the latest firefox 16.0.1
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

Maybe you are looking for