Can only connect one laptop via AEBS wifi

i was able to use my internet service with my Apple Airport Express Base Station (AEBS) for months without any problem and it was capable of simultaneous internet sharing (via wifi) among 3 laptops without the need to enter / directed to the internet provider's portal per connection (to enter account number and service reference number for authorization - works like a username and password for the connection)
not until their so-called "network upgrade" as stated by my internet provider's tech support - I am now only able to connect a single laptop via the AEBS
attempting to connect the other 2 laptops simultaneously with the 1 laptop on wifi connection was unsuccessful
can not connect more than one laptop to my internet service through the AEBS simultaneously
and whenever one laptop tries to connect to my internet service provider (via AEBS), you are immediately directed to the internet service provider's portal to enter your Account Number and Service Ref Number - you have to go through this every time you want to connect
i have already reset the settings of the AEBS and still, the problem persisted
any ideas on how to resolve this issue? is the problem with my internet service provider or my AEBS?
thanks in advance

Sounds like they've done something to stop more than one computer sharing the internet connection. It's possible that they've done this to prevent unauthorised access (by neighbours, etc.), but it's also possible that they've done it to stop people sharing one account - an attempt to get more customers to pay extra?
I'd be tempted to look for a new ISP if they can't help.

Similar Messages

  • Can only connect one user at a time via VPN?

    Hi, long-term Mac user but new to OS X Server. Dug thru the forums quite a bit but couldn't find an answer to this one - hopefully I wasn't searching with the wrong keywords.
    Installed OS X Server 10.6 on a MacBook (white, 1 generation back) at the office. Sits behind an Airport Extreme, which is connected to Comcast. Other machines at the office are NOT routed through the Server, but rather connect directly to the Airport Extreme for internet access. I've set up server.mydomainname.com to point to our Comcast address, and I am able to connect via VPN to the server without any problems, and access the server using the server.mydomainname.com address which I pointed to my Comcast IP address, as long as I check "Send all traffic over VPN connection" on my client.
    However, when I'm logged in via VPN on one computer, and then log in via VPN on another computer (with the same UID or a different one), the first one loses all connectivity through the VPN - it's as if it had been logged off.
    In Server Admin, under the Settings|Network tabs, I have Computer Name set up as "theserver", and Local Hostname as "theserver" (so I can access via theserver.private). VPN is set up to enable L2TP over IPsec, sharing ranges 10.0.1.200 thru 10.0.1.220; no load balancing, no PPTP. Client DNS servers is set to 10.0.1.29.
    Any ideas as to why I can only connect with one client at a time?

    Thanks. I didn't see anything interesting, but then again I'm not up on VPN details. Here's the scenario:
    First, I logged in as "user1", and I can use the VPN.
    Then, I logged in as "user2", and I can use the VPN with user2, but user1 is no longer able to do anything over the VPN.
    Then I hung up with user2, but user1 still can't see anything over the VPN.
    Then I hung up and reconnected with user1, and user1 can use the VPN again.
    Here's part of the log for this activity. I've replaced potentially identifying info with "XYZ" for safety. Appreciate any thoughts on this!
    Tue Oct 19 07:33:08 2010 : L2TP received ICCN
    Tue Oct 19 07:33:08 2010 : L2TP connection established.
    Tue Oct 19 07:33:08 2010 : using link 1
    Tue Oct 19 07:33:08 2010 : Using interface ppp1
    Tue Oct 19 07:33:08 2010 : Connect: ppp1 <--> socket[34:18]
    Tue Oct 19 07:33:08 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:08 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:08 2010 : lcp_reqci: returning CONFACK.
    Tue Oct 19 07:33:08 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:08 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:08 2010 : sent [LCP EchoReq id=0x0 magic=XYZ]
    Tue Oct 19 07:33:08 2010 : sent [CHAP Challenge id=0x18 <XYZ>, name = "myserver.private"]
    Tue Oct 19 07:33:08 2010 : rcvd [LCP EchoReq id=0x0 magic=XYZ]
    Tue Oct 19 07:33:08 2010 : sent [LCP EchoRep id=0x0 magic=XYZ]
    Tue Oct 19 07:33:08 2010 : rcvd [LCP EchoRep id=0x0 magic=XYZ]
    Tue Oct 19 07:33:08 2010 : rcvd [CHAP Response id=0x18 <XYZ>, name = "user2"]
    Tue Oct 19 07:33:08 2010 : sent [CHAP Success id=0x18 "S=XYZ M=Access granted"]
    Tue Oct 19 07:33:08 2010 : CHAP peer authentication succeeded for user2
    Tue Oct 19 07:33:08 2010 : DSAccessControl plugin: User 'user2' authorized for access
    Tue Oct 19 07:33:08 2010 : sent [IPCP ConfReq id=0x1 <addr 10.0.1.29>]
    Tue Oct 19 07:33:08 2010 : sent [ACSCP ConfReq id=0x1]
    Tue Oct 19 07:33:08 2010 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
    Tue Oct 19 07:33:08 2010 : ipcp: returning Configure-NAK
    Tue Oct 19 07:33:08 2010 : sent [IPCP ConfNak id=0x1 <addr 10.0.1.213> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:33:08 2010 : rcvd [IPV6CP ConfReq id=0x1 <addr XYZ>]
    Tue Oct 19 07:33:08 2010 : Unsupported protocol 0x8057 received
    Tue Oct 19 07:33:08 2010 : sent [LCP ProtRej id=0x2 80 47 01 01 00 0f 01 0a 02 1b 63 ff fe a0 dd da]
    Tue Oct 19 07:33:08 2010 : rcvd [ACSCP ConfReq id=0x1 <ms-dns1 0.0.0.1> <ms-dns1 0.0.0.1>]
    Tue Oct 19 07:33:08 2010 : sent [ACSCP ConfRej id=0x1 <ms-dns1 0.0.0.1>]
    Tue Oct 19 07:33:08 2010 : rcvd [IPCP ConfAck id=0x1 <addr 10.0.1.29>]
    Tue Oct 19 07:33:08 2010 : rcvd [ACSCP ConfAck id=0x1]
    Tue Oct 19 07:33:08 2010 : rcvd [IPCP ConfReq id=0x2 <addr 10.0.1.213> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:33:08 2010 : ipcp: returning Configure-ACK
    Tue Oct 19 07:33:08 2010 : sent [IPCP ConfAck id=0x2 <addr 10.0.1.213> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:33:08 2010 : ipcp: up
    Tue Oct 19 07:33:08 2010 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: 10.0.1.29), current interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
    Tue Oct 19 07:33:08 2010 : found interface en0 for proxy arp
    Tue Oct 19 07:33:08 2010 : local IP address 10.0.1.29
    Tue Oct 19 07:33:08 2010 : remote IP address 10.0.1.213
    Tue Oct 19 07:33:08 2010 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: 10.0.1.29), current interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
    Tue Oct 19 07:33:08 2010 : rcvd [ACSCP ConfReq id=0x2 <ms-dns1 0.0.0.1>]
    Tue Oct 19 07:33:08 2010 : sent [ACSCP ConfAck id=0x2 <ms-dns1 0.0.0.1>]
    Tue Oct 19 07:33:08 2010 : sent [ACSP data <payload len 26, packet seq 0, CI_DOMAINS, flags: START END REQUIRE-ACK>
    <domain: name XYZ>]
    Tue Oct 19 07:33:08 2010 : rcvd [IP data <src addr 10.0.1.213> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
    Tue Oct 19 07:33:08 2010 : sent [IP data <src addr 10.0.1.29> <dst addr 10.0.1.213> <BOOTP Reply> <type ACK> <server id 0x0a00011d> <domain name "XYZ">]
    Tue Oct 19 07:33:08 2010 : rcvd [ACSP data <payload len 0, packet seq 0, CI_DOMAINS, flags: ACK>]
    Tue Oct 19 07:33:34 2010 : rcvd [LCP TermReq id=0x2 "User request"]
    Tue Oct 19 07:33:34 2010 : LCP terminated by peer (User request)
    Tue Oct 19 07:33:34 2010 : ipcp: down
    Tue Oct 19 07:33:34 2010 : l2tpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.29), deleted interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
    Tue Oct 19 07:33:34 2010 : sent [LCP TermAck id=0x2]
    Tue Oct 19 07:33:34 2010 : l2tpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.29), deleted interface setting (name: ppp1, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.213).
    Tue Oct 19 07:33:34 2010 : L2TP received CDN
    Tue Oct 19 07:33:34 2010 : Connection terminated.
    Tue Oct 19 07:33:34 2010 : Connect time 0.5 minutes.
    Tue Oct 19 07:33:34 2010 : Sent 777000 bytes, received 105388 bytes.
    Tue Oct 19 07:33:34 2010 : L2TP disconnecting...
    Tue Oct 19 07:33:34 2010 : L2TP disconnected
    2010-10-19 07:33:34 PDT --> Client with address = 10.0.1.213 has hungup
    Tue Oct 19 07:33:50 2010 : rcvd [LCP TermReq id=0x3 "User request"]
    Tue Oct 19 07:33:50 2010 : LCP terminated by peer (User request)
    Tue Oct 19 07:33:50 2010 : ipcp: down
    Tue Oct 19 07:33:50 2010 : sent [LCP TermAck id=0x3]
    Tue Oct 19 07:33:50 2010 : l2tpwaitinput: Address deleted. previous interface setting (name: en0, address: 10.0.1.29), deleted interface setting (name: ppp0, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.214).
    Tue Oct 19 07:33:50 2010 : L2TP received CDN
    Tue Oct 19 07:33:50 2010 : Connection terminated.
    Tue Oct 19 07:33:50 2010 : Connect time 3.5 minutes.
    Tue Oct 19 07:33:50 2010 : Sent 625383 bytes, received 225586 bytes.
    Tue Oct 19 07:33:50 2010 : L2TP disconnecting...
    Tue Oct 19 07:33:50 2010 : L2TP disconnected
    2010-10-19 07:33:50 PDT --> Client with address = 10.0.1.214 has hungup
    2010-10-19 07:33:59 PDT Incoming call... Address given to client = 10.0.1.216
    Tue Oct 19 07:33:59 2010 : Directory Services Authentication plugin initialized
    Tue Oct 19 07:33:59 2010 : Directory Services Authorization plugin initialized
    Tue Oct 19 07:33:59 2010 : L2TP incoming call in progress from 'XYZ'...
    Tue Oct 19 07:33:59 2010 : L2TP received SCCRQ
    Tue Oct 19 07:33:59 2010 : L2TP sent SCCRP
    Tue Oct 19 07:33:59 2010 : L2TP received SCCCN
    Tue Oct 19 07:33:59 2010 : L2TP received ICRQ
    Tue Oct 19 07:33:59 2010 : L2TP sent ICRP
    Tue Oct 19 07:33:59 2010 : L2TP received ICCN
    Tue Oct 19 07:33:59 2010 : L2TP connection established.
    Tue Oct 19 07:33:59 2010 : using link 0
    Tue Oct 19 07:33:59 2010 : Using interface ppp0
    Tue Oct 19 07:33:59 2010 : Connect: ppp0 <--> socket[34:18]
    Tue Oct 19 07:33:59 2010 : sent [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:59 2010 : rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:59 2010 : lcp_reqci: returning CONFACK.
    Tue Oct 19 07:33:59 2010 : sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:59 2010 : rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <auth chap MS-v2> <magic XYZ> <pcomp> <accomp>]
    Tue Oct 19 07:33:59 2010 : sent [LCP EchoReq id=0x0 magic=XYZ]
    Tue Oct 19 07:33:59 2010 : sent [CHAP Challenge id=0xf1 <XYZ>, name = "myserver.private"]
    Tue Oct 19 07:33:59 2010 : rcvd [LCP EchoReq id=0x0 magic=XYZ]
    Tue Oct 19 07:33:59 2010 : sent [LCP EchoRep id=0x0 magic=XYZ]
    Tue Oct 19 07:33:59 2010 : rcvd [LCP EchoRep id=0x0 magic=XYZ]
    Tue Oct 19 07:33:59 2010 : rcvd [CHAP Response id=0xf1 <XYZ>, name = "user1"]
    Tue Oct 19 07:34:00 2010 : sent [CHAP Success id=0xf1 "S=XYZ M=Access granted"]
    Tue Oct 19 07:34:00 2010 : CHAP peer authentication succeeded for user1
    Tue Oct 19 07:34:00 2010 : DSAccessControl plugin: User 'user1' authorized for access
    Tue Oct 19 07:34:00 2010 : sent [IPCP ConfReq id=0x1 <addr 10.0.1.29>]
    Tue Oct 19 07:34:00 2010 : sent [ACSCP ConfReq id=0x1]
    Tue Oct 19 07:34:00 2010 : rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
    Tue Oct 19 07:34:00 2010 : ipcp: returning Configure-NAK
    Tue Oct 19 07:34:00 2010 : sent [IPCP ConfNak id=0x1 <addr 10.0.1.216> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:34:00 2010 : rcvd [IPV6CP ConfReq id=0x1 <addr XYZ>]
    Tue Oct 19 07:34:00 2010 : Unsupported protocol 0x8057 received
    Tue Oct 19 07:34:00 2010 : sent [LCP ProtRej id=0x2 80 57 01 01 00 0e 01 0a 02 1b 63 ff fe 99 35 cb]
    Tue Oct 19 07:34:00 2010 : rcvd [LCP ProtRej id=0x2 82 35 01 01 00 04]
    Tue Oct 19 07:34:00 2010 : rcvd [IPCP ConfAck id=0x1 <addr 10.0.1.29>]
    Tue Oct 19 07:34:00 2010 : rcvd [IPCP ConfReq id=0x2 <addr 10.0.1.216> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:34:00 2010 : ipcp: returning Configure-ACK
    Tue Oct 19 07:34:00 2010 : sent [IPCP ConfAck id=0x2 <addr 10.0.1.216> <ms-dns1 10.0.1.29> <ms-dns3 10.0.1.29>]
    Tue Oct 19 07:34:00 2010 : ipcp: up
    Tue Oct 19 07:34:00 2010 : found interface en0 for proxy arp
    Tue Oct 19 07:34:00 2010 : local IP address 10.0.1.29
    Tue Oct 19 07:34:00 2010 : remote IP address 10.0.1.216
    Tue Oct 19 07:34:00 2010 : l2tpwaitinput: Address added. previous interface setting (name: en0, address: 10.0.1.29), current interface setting (name: ppp0, family: PPP, address: 10.0.1.29, subnet: 255.0.0.0, destination: 10.0.1.216).
    Tue Oct 19 07:34:00 2010 : rcvd [IP data <src addr 10.0.1.216> <dst addr 255.255.255.255> <BOOTP Request> <type INFORM> <client id 0x08000000010000> <parameters = 0x6 0x2c 0x2b 0x1 0xf9 0xf>]
    Tue Oct 19 07:34:00 2010 : sent [IP data <src addr 10.0.1.29> <dst addr 10.0.1.216> <BOOTP Reply> <type ACK> <server id 0x0a00011d> <domain name "XYZ">]

  • WRT45G: can only connect one pc at the time to internet, cannot login to router setup

    Hello,
    I don't get this. The complete network worked fine for ... years? After a call with the ISP about a general/different issue, we can now only connect one pc at the time to internet. (We were asked to take out cables and we've put them back).
    I've been trying and searching for an answer for hours.
    problem:
    We can only connect through the router to internet with only one pc at the time (the first pc we connect after starting up the router).
    Also we cannot get into the setup menu of the router at 192.168.1.1
    We've been trying to reset the modem for 10, 30 seconds.
    Auto resolve IP/DNS. DHCP is enabled.
    I also remembered that I pushed the SES button, it turned from orange to flashing bluish. I never knew aboutthis function, nor it is mentioned in the manual I downloaded. Now this SES indicator is off.
    Also WLAN and DMZ led are off.
    I downloaded EasyLink_Connect.exe, went through the setup. It recognises there's internet connection, but stops and says: cisco does not support this modem.
    Temp. replacing this WRT45G modem with another one did not resolve the issue.
    I have no clue what went wrong, what we did wrong, and how we can resolve this issue? Please help! Thanks
    Message Edited by Brammm on 11-27-2008 03:13 PM

    Okay! 
    1.  (results when having assigned a static IP) :
     Windows IP-configuratie
             Primair DNS-achtervoegsel. . . . .:
            Knooppunttype: . . . . . . . . . .: onbekend     (unknown)
            IP-routering ingeschakeld. . . . .: nee      (no)
            WINS-proxy ingeschakeld . . . . . : nee    (no)
     Ethernet-adapter LAN-verbinding:
             Verbindingsspec. DNS-achtervoegsel:
            Beschrijving . . . . . . . . . . .:
              VIA Compatable Fast Ethernet Adapter
            Fysiek adres. . . . . . . . . . . : 00-16-17-CE-D5-40
            DHCP ingeschakeld:. . . . . . . . : nee    (no)
            IP-adres. . . . . . . . . . . . . : 192.168.1.20
            Subnetmasker. . . . . . . . . . . : 255.255.255.0
            Standaardgateway. . . . . . . . . : 192.168.1.1
            DNS-servers . . . . . . . . . . . : 192.168.1.1
     (results without having assigned a static IP: automatic config.) :  
     Ethernet-adapter LAN-verbinding: 
            Verbindingsspec. DNS-achtervoegsel:
            Beschrijving . . . . . . . . . . .:
              VIA Compatable Fast Ethernet Adapter
            Fysiek adres. . . . . . . . . . . : 00-16-17-CE-D5-40
            DHCP ingeshakeld. . . . . . . . . : ja     (yes)
            Autom. configuratie ingeschakeld. : ja       (yes)
            IP-adres. . . . . . . . . . . . . : 84.30.99.32       
    Subnetmasker. . . . . . . . . . . : 255.255.254.0       
    Standaardgateway. . . . . . . . . : 84.30.98.1       
    DHCP-server . . . . . . . . . . . : 213.51.144.90
            DNS-servers . . . . . . . . . . . : 212.54.40.25
                                                212.54.35.25
    2.  I do have another router, when I try that one, the problem we have remains. So that's a bit strange to me. That one is supposed to be working.
    Does this SES function configure anything other than the modem? So, does it alter PC configurations? I have no clue.   We even start to wonder whether the ISP is able to set up their internet in a way that unables us to make use of a router? That would be ridiculous
    Message Edited by Brammm on 11-30-2008 04:03 AM

  • Can only access one Mac via Back to my Mac

    I have Back to My Mac set up on my home Mac and two Macs at my office. I can successfully connect to one of the Macs at the office from home, but not the other.
    Both office Macs are running Mountain Lion, have Back to My Mac enabled with the same iCloud account credentials, and are on the same LAN/router/switch. My home Mac is running 10.7.5 and cannot be upgraded to 10.8 (it's a very old Mac Pro 1,1.)
    Because both office Macs are on the same LAN, those Macs can see one another in the Shared Sidebar in Finder, and I can Screen Connect that way, but I can't access the second office Mac from home for some reason.
    I've tried stopping/starting Back to My Mac on the troublesome Mac numerous times (as well as my home Mac), and followed the instructions elsewhere on Apple's site to delete all the Back to my Mac Keychains and recycle the connection, but it didn't help.
    Because it's a corporate network, I don't have direct access to the router settings (both work Macs complain that NAT-PMP and/or UPnP aren't on, but since I can still connect to one work Mac from home, that doesn't appear to be the problem.) Both Macs are connected exactly to the network the same way, though, so I'm confused as to why one Mac works while the other doesn't.
    Are there any other settings I can check or confirm on the problematic Mac? Am I incorrect in assuming I should be able to connect to two different Macs remotely using the same iCloud account? I just assumed all the Macs I have would be connectable via Back to My Mac if they used the same credentials.
    Thanks,
    R

    Hello Robbie,
    Thank you so much for the details you provided reguarding the Back to My Mac trouble you are experiencing.  You have taken some really good troubleshooting steps already, but I recommend reviewing the steps in the section titled "Troubleshooting Back to My Mac" in the following article (you can skip the steps you have already gone through):
    OS X: Using and troubleshooting Back to My Mac with your iCloud account
    http://support.apple.com/kb/HT4907
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • 2 iPads, but can only connect one iPad at a time to my home network.  Is this a known issue with Mac/iPads in general?

    At home I have a HP PC, netbook and Sony laptop with no connection issues.  Last year I bought an iPad 1 for my wife.  This year I bought an iPad 2 for myself.  However, only one iPad can connect to the wifi home network at a time. If I am using the iPad2 then the iPad1 fails to connect to the internet.  if the iPad1 is being used then the iPad2 cannot connect.   I tried resetting iPad network settings for both, reset router, and updated both iPads to latest software/firmware yesterday.  Right now the only iPad that shows any connection is the iPad1.  The iPad2 does not see the home network or any other outside network.  Any suggestions or ideas on how to resolve this?  It is odd the network issues only affect the iPad's.

    @dananova,
    It sounds like you need to either increase the number of dynamic IP addresses your router will hand out or change some of your devices to static IP addresses. 
    Check the router manual on how to change the dynamic IP range of your router.  If you don't have a manual, you can go to Belkin's website and download it.
    To change the IP address of your iPads to static addresses, go to Settings > Wi-Fi and tap the ">" next to the name of your wireless network.  DHCP should be highlighted.  Write down the all the settings on the screen. Next tap the Static button.  Enter the exact same information that you copied from the DHCP screen with the exception of the last 3 digits of the IP address.  Enter a new 3 digit number in this spot.  Generally the original IP address will end with a low number such as 009, so pick a number that is not that low but less than 255.  I would suggest a range of 240 to 250, unless the original IP range falls near this range.  Also make sure you use a different 3 digits for each device you set to use a static IP address.

  • Clients behind shared wireless can only connect one at a time to RV042

    I am using a RV042 HW version 3 (black front panel and blue user interface).
    I have have 2 vpn users who share an apartment.
    They use a wireless router to get to the internet.
    Both use Windows 7 (firewall enabled) and the latest QuickVPN client.
    As it is, only one of the users can connect at the same time.
    When one is already connected the other gets a message "the remote gateway is not responding"
    Has anyone else experienced something like this ?
    Thanks in advance.
    These are the logs from the PC that connected ok:
    From wget_stop_error.txt
    --10:29:50--  https://Serena:*password*@180.243.235.82/StopConnection.htm?version=1?status=disable?IP=192.168.0.101?PASSWD=*password*?USER=Serena
               => `C://Program Files (x86)//Cisco Small Business//QuickVPN Client//stopconn.conf'
    Connecting to 180.243.235.82:443... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: unspecified [text/html]
        0K                                                          96.68 KB/s
    10:29:50 (96.68 KB/s) - `C://Program Files (x86)//Cisco Small Business//QuickVPN Client//stopconn.conf' saved [99]
    From wget_request_error.txt
    --10:29:45--  https://Serena:*password*@www.vantagebanking.com:60443/CheckIsakmp.htm?version=1?IP=192.168.0.101?PASSWD=*password*?USER=Serena*password*@www.vantagebanking.com:60443/CheckIsakmp.htm?version=1?IP=192.168.0.101?PASSWD=*password*?USER=Serena
               => `C://Program Files (x86)//Cisco Small Business//QuickVPN Client//isakmp_status.conf'
    Resolving www.vantagebanking.com... 180.243.235.82
    Connecting to www.vantagebanking.com[180.243.235.82]:60443... connected.
    HTTP request sent, awaiting response...
    End of file while parsing headers.
    Giving up.
    From wget_error.txt
    --10:29:13--  https://Serena:*password*@180.243.235.82/StartConnection.htm?version=1?IP=192.168.0.101?PASSWD=*password*?USER=Serena
               => `C://Program Files (x86)//Cisco Small Business//QuickVPN Client//vpnserver.conf'
    Connecting to 180.243.235.82:443... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: unspecified [text/html]
        0K                                                         176.76 KB/s
    10:29:14 (176.76 KB/s) - `C://Program Files (x86)//Cisco Small Business//QuickVPN Client//vpnserver.conf' saved [181]
    From Log.txt
    2011/07/16 10:29:12 [STATUS]OS Version: Windows 7
    2011/07/16 10:29:12 [STATUS]Windows Firewall Domain Profile Settings: ON
    2011/07/16 10:29:12 [STATUS]Windows Firewall Private Profile Settings: ON
    2011/07/16 10:29:12 [STATUS]Windows Firewall Private Profile Settings: ON
    2011/07/16 10:29:12 [STATUS]One network interface detected with IP address 192.168.0.101
    2011/07/16 10:29:12 [STATUS]Connecting...
    2011/07/16 10:29:12 [DEBUG]Input VPN Server Address = www.vantagebanking.com
    2011/07/16 10:29:13 [STATUS]Connecting to remote gateway with IP address: 180.243.235.82
    2011/07/16 10:29:14 [STATUS]Remote gateway was reached by https ...
    2011/07/16 10:29:14 [STATUS]Provisioning...
    2011/07/16 10:29:24 [STATUS]Success to connect.
    2011/07/16 10:29:24 [STATUS]Tunnel is configured. Ping test is about to start.
    2011/07/16 10:29:24 [STATUS]Verifying Network...
    2011/07/16 10:29:30 [WARNING]Failed to ping remote VPN Router!
    2011/07/16 10:29:33 [WARNING]Failed to ping remote VPN Router!
    2011/07/16 10:29:36 [WARNING]Failed to ping remote VPN Router!
    2011/07/16 10:29:39 [WARNING]Failed to ping remote VPN Router!
    2011/07/16 10:29:42 [WARNING]Failed to ping remote VPN Router!
    2011/07/16 10:29:45 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
    2011/07/16 10:29:49 [STATUS]Disconnecting...
    2011/07/16 10:29:53 [WARNING]Failed to disconnect.
    And these are the ones from PC # 2 which failed to connect with error  "The remote gateway is not responding"
    This error just keeps looping around
    From wget_error.txt
    --10:29:21--  https://Paul:*password*@180.243.235.82/StartConnection.htm?version=1?IP=192.168.0.100?PASSWD=*password*?USER=Paul
               => `C://Program Files (x86)//Cisco Small Business//QuickVPN Client//vpnserver.conf'
    Connecting to 180.243.235.82:443... connected.
    HTTP request sent, awaiting response... 200 OK
    Length: unspecified [text/html]
        0K                                                         174.80 KB/s
    10:29:22 (174.80 KB/s) - `C://Program Files (x86)//Cisco Small Business//QuickVPN Client//vpnserver.conf' saved [179]
    From Log.txt
    2011/07/16 10:29:18 [STATUS]OS Version: Windows 7
    2011/07/16 10:29:18 [STATUS]Windows Firewall Domain Profile Settings: ON
    2011/07/16 10:29:18 [STATUS]Windows Firewall Private Profile Settings: ON
    2011/07/16 10:29:18 [STATUS]Windows Firewall Private Profile Settings: ON
    2011/07/16 10:29:18 [STATUS]One network interface detected with IP address 192.168.0.100
    2011/07/16 10:29:18 [STATUS]Connecting...
    2011/07/16 10:29:18 [DEBUG]Input VPN Server Address = www.vantagebanking.com
    2011/07/16 10:29:20 [STATUS]Connecting to remote gateway with IP address: 180.243.235.82
    2011/07/16 10:29:22 [STATUS]Remote gateway was reached by https ...
    2011/07/16 10:29:22 [STATUS]Provisioning...
    2011/07/16 10:29:32 [STATUS]Success to connect.
    2011/07/16 10:29:32 [STATUS]Tunnel is configured. Ping test is about to start.
    2011/07/16 10:29:32 [STATUS]Verifying Network...
    2011/07/16 10:29:38 [WARNING]Failed to ping remote VPN Router!
    2011/07/16 10:30:51 [WARNING]Failed to ping remote VPN Router!

    I just removed the tunnel and after that I cannot log in any more.
    I rebooted the router after removing the tunnel.
    I have tried many times.
    I use remote management from Singapore with the RV042 in Jakarta.
    Other users also cannot log in.
    "Verifying network" is as far as we get.
    This is the log:
    2011/07/19 14:54:06 [STATUS]OS Version: Windows XP
    2011/07/19 14:54:06 [STATUS]Windows Firewall is OFF
    2011/07/19 14:54:07 [STATUS]One network interface detected with IP address 10.71.11.9
    2011/07/19 14:54:07 [STATUS]Connecting...
    2011/07/19 14:54:07 [DEBUG]Input VPN Server Address = 180.243.235.82
    2011/07/19 14:54:07 [STATUS]Connecting to remote gateway with IP address: 180.243.235.82
    2011/07/19 14:54:09 [STATUS]Remote gateway was reached by https ...
    2011/07/19 14:54:09 [STATUS]Provisioning...
    2011/07/19 14:54:19 [STATUS]Success to connect.
    2011/07/19 14:54:19 [STATUS]Tunnel is configured. Ping test is about to start.
    2011/07/19 14:54:19 [STATUS]Verifying Network...
    2011/07/19 14:54:23 [WARNING]Failed to ping remote VPN Router!
    2011/07/19 14:54:24 [WARNING]Failed to ping remote VPN Router!
    2011/07/19 14:54:25 [WARNING]Failed to ping remote VPN Router!
    2011/07/19 14:54:26 [WARNING]Failed to ping remote VPN Router!
    2011/07/19 14:54:27 [WARNING]Failed to ping remote VPN Router!
    2011/07/19 14:54:28 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
    2011/07/19 14:54:37 [WARNING]Failed to ping remote VPN Router!
    2011/07/19 14:54:38 [WARNING]Failed to ping remote VPN Router!
    2011/07/19 14:54:39 [WARNING]Failed to ping remote VPN Router!
    2011/07/19 14:54:40 [WARNING]Failed to ping remote VPN Router!
    2011/07/19 14:54:42 [WARNING]Failed to ping remote VPN Router!
    2011/07/19 14:54:42 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
    I have restored from the export .config file and all is back to normal.
    So I better leave the single tunnel as it is.
    I will try with spare RV042 when I am back in Jakarta

  • My MacBookPro only connects to Internet via a WiFi hotspot

    New MacBookPro laptop with OS 10.8.4 with Airport turned on connects via WiFi hotspot to internet but will not connect wirelessly to Internet via modem and router connected to cable service.  Will also not connect via Ethernet to modem and router to cable service.  Desktop does connect.  Any suggestions for connecting via Airport to modem and cable from MacBook Pro laptop?

    The warranty entitles you to complimentary phone support for the first 90 days of ownership.
    If you bought the product in the U.S. directly from Apple (not from a reseller), you also have 14 days from the date of delivery in which to exchange or return it for a refund. In other countries, the return policy may be different. If you bought from a reseller, its return policy applies.

  • Can only connect one PC to WRT54G2

    I recently purchased a WRT54G2 and initially it had been running fine. However, we recently realized that while my PC and my roommate's Mac can connect, we can't get a second PC to connect to our network. We have tried various computers and they all connect and say "limited or no connectivity". However, we have a friend visiting who has a Mac and that connects fine (as do iPhones). Does anyone have any advice on how I can fix this?

    Access the setup page of the router by launching an
    Browser and type on the address bar, 192.168.1.1 and press enter. When
    it prompts for the username and password, leave the username field
    empty and provide password as "admin" (Without quotes)
    click on ok.
    On the main setup page the ""Internet Connection Type"" should be
    on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
    button.
    Now click on the sub tab ""MAC address clone"".
    - Click on enable
    Click Clone & click save settings
    Check WAN Ip on Status page of router ....
    If getting Valid Ip .... try going online
    If not ... power cycle for 4-5 minutes & then again check the WAN Ip address .....

  • Can only connect to Internet from one computer at a time on network

    I have a 2 computer network in my office networked with an Asante 10/100 hub. The computers are a iMac 24 (Intel) and an old G4 (PCI). The network has worked fine until just recently. Now, I can only connect to the Internet with one computer at a time...(DSL connection). I checked cables, ports, etc, and I'm wondering if this is a 10.4.9 issue. Coincidentally, I noticed that I am not able to access the Internet via Win XP using Parallels which also worked fine up until recently. I checked with the ISP (AT&T) who confirmed that all is OK on their end. Anyone have similar problem? Could OS X 10.4.9 be the culprit? Any help on this will be much appreciated. Thanks.
    iMac 24   Mac OS X (10.4.9)   2G RAM; NVIDIA GeForce 7600 GT 256

    I'd consider that a 3 computer network, Parallels being a virtual machine would alias the ethernet interface and need its own IP address. That may or may not have anything to do with your problem. Actually, the way you've described things, it sounds like a lot has to do with your contract with ATT. Is there a routing device at your end?
    The only way 10.4.9 could be the culprit would be if it were the routing device.
    -Phil

  • TS1398 i have trouble connecting to wifi i can only connect from less than a feet from my router

    i have a iphone4 and i am haveing trouble conneting to wifi can only connect to wireless router from one feet away

    Hi there,
    You may want to take a look at the troubleshootings steps found in the article below.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/kb/HT4628
    -Griff W.

  • SSAS can't connect to services via IP; only domain

    Is there some FMS-specific reason why a sendAndLoad function in SSAS couldn't connect to a site on an IP address? Are there any configurations that would need to be set to allow/deny this type of connection? We have a server instance that can only connect to sites hosted on fully qualified domains.

    IPs should work for this, so I'll have to go for a few meta reasons perhaps
    1. Perhaps the DNS is resolving to an IP that's not the one being targetted, we should probably double check that
    2. Since a lot of load balancers end up serving a different IP to handle the traffic than is initially targetted we may be getting redirected via DNS but IP isn't working.
    I'd confirm from that machine directly if possible - if not then I'd check if FMS from its general SSAS can connect to the IP as desired - if it can then perhaps there's a bug we're unaware of in there.
    Asa

  • How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

    How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

    If you have not already done so, your chances will really improve if you....
    1) Connect the printer to the USB port on the AirPort Extreme
    2) Download and install Bonjour Print Services for Windows on the PC

  • Can only connect from one direction

    I'm having trouble video confrencing... I tried searching the forums, but I'm having trouble thinking of clever search terms.
    I can only connect from one direction with one person. They can invite me to a chat and it works fine every time. However when I invite them it always fails. I can invite other people and it works fine though.
    This doesn't seem like a typical router problem, because they can invite me and we videochat just fine.
    This has been a problem for most versions of iChat that I can remember, but I'm using 3.1.5 currently.

    Hi
    Is the other person a PC user.
    Tony

  • I have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

    i have a ipad2 and can only connect to the internet on safari but not any WiFi related apps such as YouTube or Facebook. plz help.

    Try changing the channel in use in case you're getting interference. 
    If you have WEP enabled on the Internet Sharing it'ss worth disabling it whilst troubleshooting the connectivity issues.
    mrtotes

  • I have  my photoshop cc installed on my Mac and my windows laptop is it true that I can only use one or the other now? and if this is the case if my mac were turned off should my laptop now work? I am on the photoshop photography program

    i have  my photoshop cc installed on my Mac and my windows laptop is it true that I can only use one or the other now? and if this is the case if my mac were turned off should my laptop now work? I am on the photoshop photography program its just that i have never noticed tho before i have my mac turned on and the laptop PS works fine on the Mac but not on the Laptop

    Hello,
    see >>> http://helpx.adobe.com/creative-cloud/help/install-apps.html  here >>> How many computers can I install on
    I quote: You may install software on up to two computers. These two computers can be Windows, Mac OS, or one each.
    If you install on a third computer, it will request you to de-activate on the other two computers. You can then reactivate one of the previous two computers, and use Creative Cloud apps on it.
    Good luck!
    Hans-Günter

Maybe you are looking for