Can only define one name server??

Can someone please tell me how to add more than one name server to my router (WRV54G) to push out to it's DHCP clients? Under Setup > Network Setup, there's only room for one "DNS IP Address". All of my other Linksys devices allow for more. Firmware Version: 2.39.2. Thanks!

With WRV54G, no such option is available. It is available with WRV200

Similar Messages

4 domains names can only get one to work

4 domains names only 1 working
i can only get one to work and now its crossed with other domains
example i have jcsrealty.com all ready working fine. i want to post customxcycles.com on a new site but it cross over on to jcsrealty.com. so when you go to jcsrealty.com it pulls up customxcycles.com
and no jcsrealty
please help
thanks

Welcome to the Apple Discussions. Are you publishing to a MobileMe account? Is each site in its own domain file? If yes to both and you're using the CNAME method of domain name forwarding for the first site you published the last published site by iWeb will be the one that gets open when you enter your domain name. All additional sites must use the simple domain name (URL) forwarding.
There are a couple of ways to get around that:
1 - use the simple domain name (URL) forwarding for every one of your sites. That means pointing each site to its respective address on your MMe account: http://web.me.com/YourMMe_Account_Name/SiteName/.
2 - add a dummy site in each of the domain files as described by Wyodor in this post: Re: Is it possible to have multiple sites when using ur Domain name.
OT

Can only access one web site

I can only access one web site . www.cisco.com. I am connected to the internet via a lynksys DSL Router, I am using dhcp and NAT from the Lynksys note:works fine for 3 other windows based pc's.
when I try to connect to any other site the page Hangs during load and neve displays.
I can ping all of the web sites that do not come up
I am using a SunBlade 100 and did a new install. I tried the install with webstart and had the same result during the install. again I can only open sucessfully www.cisco.com.

Hello!
I am getting this error, but the above fix does not solve the issue, however I do know what has caused it.
I have an edmx file in a WCF webservice which feeds a silverlight app. The edmx is quite complex and a bit fragile, but was working fine up until I introduced our Industry Codes view into the model. The view is basically { ID, ParentID, Name, ... }. In my model I have created an association to itself which describes Children(*)/Parent(0/1) so I have a nice and tidy hierarchical structure. The edmx and the service build without any errors - hurrah! However, when I update the service reference I then get the below error (and a whole load of others as none of the webservice objects exist anymore):
Error 21 Custom tool error: Failed to generate code for the service reference 'WCF_ContactAdmin'. Please check other error and warning messages for details. X:\2008-054 ContactAdmin_Silverlight\Contact2_Admin_Silverlight\Service References\WCF_ContactAdmin\Reference.svcmap 1 1 Contact2_Admin_Silverlight
When I try the fix mentioned in the link above this error disappears, but then so do all the objects in the datamodel, so I cannot continue from there.
Having the hierarchical data objects defined in the EDM will make like so much easier in future, any help will be greatly appreciated, thank you!!
Tim
Web Developer at Terrapinn

Database 'TEST' is already open and can only have one user at a time.

Hi all,
Could some help on this issue as per urgency!
Database 'TEST' is already open and can only have one user at a time.
I also tried this command but having the same error, please let me know how to troubleshoot this issue
Use Master
GO
Select * from master.sys.sysprocesses
Where spid > 50
And dbid=DB_ID (‘StuckDB’)) -- replace with your database name
Thanks

Hi Tony,
sorry got the same error again, it can't allow me sp_who2 as well
I tried above command got the following error
Changes
to the state or options of database ‘TEST’ cannot be made at this time. The database is in single-user mode, and a user is currently connected to it.Msg 5069, Level 16, State 1,

When downloading i can only download one link at a time per window. i used to be able to download six links at a time per page. how do i go back to this?

got a new laptop. unsure of firefox verson on old as the computer quit taking a charge.
but essentially on my old laptop if a window had six downloadable links i would be able to download all six at once. now i can only download one link at a time. this is very annoying. i do not believe it is an issue with the new laptop itself as it is a highend toshiba.

Hello cherokeeguy, go to [http://kb.mozillazine.org/About:config about:config] find [http://kb.mozillazine.org/Network.http.max-persistent-connections-per-server network.http.max-persistent-connections-per-server] right-click on it, select modify and put a greater value, try 10 or 16, click ok to save it, exit firefox and restart it.
BUT this normally should not happen !
check it also in [https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Safe Mode], select '''''"Start in Safe Mode" '''''and see if this happen again, if not see: [https://support.mozilla.org/en-US/kb/troubleshoot-extensions-themes-to-fix-problems Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]
also try to update to the latest firefox 16.0.1
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

ITunes tells me "Could not be used because the original file could not be found. Would you like to locate it?" I can locate it and all my other music, but can only open one song at a time. How do I set it to open all my music whenever I want it?

iTunes tells me my song selection: "Could not be used because the original file could not be found. Would you like to locate it?" I can locate it and all my other music, but can only open one song at a time. How do I set it to open all my music whenever I want?
Message was edited by: Woildbill

I just spent several hours dealing with this when switching to a new PC. It was extremely frustrating as I knew my files were on my external HD but no matter how many times I copied my old iTunes folder over the files were still missing...because dummy me had forgotten to "unhide folders" on my new PC and my old files were actually stored in a hidden folder created long long ago.
This is how I did it on Windows 7 with iTunes 10
1. Look in iTunes Advanced Preferences to see where iTunes is saving files. (Edit, Preferences, Advanced)
Example: C:/Users/Woildbill/My Music/iTunes/Music
2. Ensure you are able to see hidden files - Control Panel, Folder Option, View, Show Hidden Files
3. Use Your Computer's Search Function to Locate the Missing File (Start, Search, type name of song - I started my search in "My Music" folder but be sure to expand to entire Computer if not found right away)
4. In Search Results, right-click found folder and select properties. This will tell you where the file is actually stored.
5. Use Windows Explorer (right-click start) to navigate to the location of the file. It is likley your other missing files are in the same location.
6. In Windows Explorer, copy the newly located files to the iTumes location from Step 1 and everything should work again.
Hope this helps!

I had 2 games of clash of clans on 1 game centre. Now I can only see one? How can I find the other one?

My kids had 2 games of clash of clans on 1 game centre. Now I can only see one? How can I find the other one?
My daughter set up a game centre on her ipad. My son, on his ipad used the same game centre log in. He then set up his own game of clash of clans. After my son set up his Clash of Clans, my daugher set up her own Clash of Clans using the same game centre log in on her ipad. Both were using the Clash of Clans successfully on their own ipads using the same game centre log in.
One day my son signed into someone elses Clash of Clans, since then he is unable to go back to his Clash of Clans and can only see his sisters.
Please let me know if this can be resolved.
We wish to delete my daughters Clash of Clans - as she does not use it at all. We would like to regain access to my sons.
My son can visit his Clash of Clans - his clan name is 'The Big Boys' He has a shield that is blue with a yellow lightning from top right to bottom left. His name is Fat Poo (I know ridiculous).
If you can help us or advise us what to do we would make my son very happy
thanks

Thanks for taking a stab at it: that didn't prove to be the problem. That option in the settings for tabbed browsing was not checked.
I may be a bit behind the times: I am used to tabbed browsing showing all the tabs it possibly can, instead of just the last one. Sometimes it won't even show the last tab: I can have 15 tabs open, and not see a single tab. I've been confused by this into closing a window with lots of tabs open, because it looks like a single page-window.
My main problem with the tab-bar flashing to the end of the row is that it means a great deal more mouse-clicking around to browse.
I haven't tried installing the latest beta. Maybe that would fix the problem.
Toddo

In photoshop elements 12 i try to select multiple people to view in organize but can only select one

in photoshop elements 12 i try to select multiple people to view in organize but can only select one person at a time. if I try to select two or more people to see their pictures, I get nothing. I try to use CTL-click, but that does not work

Hi,
Try switching to Media view and then go to Find -> By Details.
Set the field to People and select the persons name.
You add further people by clicking on the + sign
The two options above the search criteria allow you to select all photos containing at least one or only ones with all of your selections.
The search can be saved in case you want to repeat it a later time.
Hope that helps
Brian

Can only print ONE document then have to reset Airport Express to print aga

The title says it all.
Everything used to work fine until I installed Leopard. Now I can only print one document; subsequent documents will hang at 16% or 28%, etc.
Anyone else had this problem?
Thanks,
Mark

No, you are not the only person with the problem. I have tried it with both a "g" and an "n" Express (I bought the "n" hoping it might work better; nope). I have a Samsung CLP-510 plugged in to it. It prints one document, then I have to reset the Express before it will print again. When it tries to print the next document, it flashes "Unable to open device (read failure)!" briefly, then pauses the printer.
It's been driving me crazy since I installed Leopard, so I basically gave up on the Express as a print server as there seems to be no cure, and Apple seems to have no interest in fixing it. (I have been through several firmware updates since the problem started, and none have made any difference).
+Oddly, though, just now after the seventh reset, it accepted 6 of the documents in my queue (I had 22 in the queue, and I've just been waiting for it to pause, then resetting the router for each document) before it failed.+
Message was edited by: The Technomancer

*"You can only assign one enhancement set per client"*

Hi Experts,
I have created one enhancement set key by using SM34 and assigned to Client. I did some enhancements on my Account management screen.
Today i wanted to do some enhancements on opportunity screen, so i have created one more enahancement set key (SM34) and tried to assign it to my client by using SM30 by clicking on "New Entries". It says "You can only assign one enhancement set per client", so what exactly this means, cant i assign more than one enhancment set key for each client?
If that is the case , whatever enahancments i do now and in future , Can i use the same enhancement key for all my enhancements? Will this create any problem/affect in future for my past enhancements on that particular enhancment set key?
Else,What If everytime i create a New enhancement set key and if i replace it with the old one for the same client in SM30?
Hope my question/ doubt is not confusing.....
Thanks & Regards
Rohan

Hi Carsten,
Thanks for your reply, it really cleared my doubt.
But one more thing, i have already created 2 enhancement sets. i wanted to delete one, from where shall i start , can i delete it directly from SM34 itself or do i need to delete those enhancments in workbench and then table entries finally enhancement set?
Sorry Carsten, I am a beginner so some questions may be really strange.
And one more question.
When i enhance a component, it asks for Application name where i have given Zname,
then Page : For page can i use the same repository.xml or do i need to choose a different name??
Thanks & Regards
Rohan

Can only print one item at a time

Hey everyone,
Bit of a Photoshop novice here, use it for DVD covers and labels. I have been using CS3 previously but upgraded to CS5.5 last year. The thing is on CS5.5 I can only print one page at a time even when I input say 20 copies to be printed, only one will print. That goes for the regular printer for printing covers and the disc printer.
I can open CS3 up and right away it will print however many I ask it to.
Is there something I am missing? Something so painfully obvious that it is staring me in the face but I am just not seeing it?
Thanks in advance!

It isn't a printer setting. I have 3 different printers connected to my system and all of them worked with CS3 fine. And when I delete the preferences folder for CS5.1 it works as it should but only once, then afterwards it only prints one copy, no matter how many I ask it to print!
So if it works when the preferences have been removed, then fails to work afterwards, how can that be a printer setting?
I have read elsewhere that others have had similar issues with CS5 and Windows 7.

I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I did it again. Now it will not run and I get an error message saying that firefox is running and you can only run one at a time. I can't figure out what is running.

Because of a problem, I uninstalled Firefox once, reinstalled it and it ran. I had a problem so I uninstalled/reinstalled it again. Now it will not run. I get an error message saying that firefox is running and you can only run one at a time. I have uninstalled multiple times and can't figure out what is running. The is only one Firefox installed and it is not open. What does this mean and how do I fix it?

If you use ZoneAlarm Extreme Security then try to disable Virtualization.
*http://kb.mozillazine.org/Browser_will_not_start_up#XULRunner_error_after_an_update
See also:
*[[/questions/880050]]

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page, but not all or pages 1-5. Can this be overcome?

I am trying to print all the PDF pages in a range of 5 pages but can only print one page at a time . . . It will print the current page only, but not all or pages 1-5. I need to go to the next subsequent page and command to print current page; continuing with this procedure until all pages are printed one at a time. Can this be overcome?

You can use printPages(1, 5), however I need to know how you print current page.

I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe

I am trying to reinstall Dreamweaver CS3 from the CD after having computer issues. Now getting error "You can only install one Adobe product at a time. Please complete the other installation before attempting to install ......." There is no other Adobe product installing. I have used the Adobe Cleaner Tool many times and uninstalled other Adobe Products but neither has worked. I have uninstalled/reinstalled this CD version of Dreamweaver several times when changing computers and after having computer issues. A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues. Please help.

A google search of the problem suggested it may be an error related to the number of times I can reinstall this product due to licensing issues.
Absolutely not. You are misinterpreting things. The activation check never happens when just running the installer, only much later. It means what it says - there is another "install" pending/ active on your system, meaning somewhere there is an (invisible) process still blocking things. Either way, since you haven't provided any real technical info, we can't advise specifically. if you are on Windows, you may want to check your task manager and terminate any setup.exe and msiexec.exe processes plus potentially may need to manually fix/ delete some registry keys. For anything beyond that you will have to be much more specific.
Mylenium

I have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

i have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

Chris, I believe this link may have the information you're looking for. Welcome to discussions!
http://docs.info.apple.com/article.html?artnum=300432

Can only define one name server??

Similar Messages

Maybe you are looking for