Can only hear guitar in right speaker/headphone...

How do I record/playback the guitar in both speakers? I'm connected with an M-Audio Fasttrack. Is there something I have to do with the stereo/mono options on the Fasttrack or GB? Something to do with echo/reverb? Thanks!

Stereo is two signals, one being sent to each channel (left and right). Mono is one signal being sent to both channels (left and right). A mic sends a single signal, hence the mono setting.

Similar Messages

  • When i make a call, i can only hear other person on speaker phone not normally

    When I make or receive a call on my Iphone 4, I cannot hear the other person unless I put it on speakerphone. Any ideas how to correct this? Thanks. Lorraine

    I am currently having the same problem. My iphone 4 is only 4 months old. Did you ever solve this problem?

  • Can only hear phone through speaker

    Can someone please help me. I updated my iPhone yesterday and now I can only hear callers via the speaker function. The regular ear portal and earphones no longer work. Anyone with experience with this?
    thanks,

    As absurd as that was, it actually worked. None of my system sounds were working either. I had used the iPod function of my iPhone last night, so I'm guessing that's what goofed everything up. Does Apple know about this yet?
    -Mateo

  • Any idea why I can only hear a caller when I'm using speaker phone?

    Does anyone know why I can only hear a caller when I am using speaker phone? 

    Hi goodferg,
    The troubleshooting steps below may help you with the sound issue you are having with your iPhone 4:
    iPhone: Can't hear through the receiver or speakers
    Resolution
    Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
    Make sure the Ring/Silent switch is not switched to silent.
    While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
    Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
    For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
    If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
    Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
    If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
    Restart the iPhone.
    If restarting the iPhone doesn't resolve the issue, try restoring the device.
    If the issue persists, go to the Service Answer Center - iPhone for information on service.
    Hope this helps!
    - Judy

  • When burned to a disk i can only hear most tracks through the left speaker!

    alright, i recently recorded a few songs they consist of a looped drumbeat some software and real instruments. I made sure all were panned to the center, but when i listen to it on a cd or on itunes i can only hear a majority of the parts through the left speaker. the part that comes through the right speaker is the looped drum beat. So if anyone has any suggestions or something i just missed please let me know. thanks.

    http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly ?

  • Low volumn when speaking on phone (Can only hear with ear phones)

    Hi All,
    I have an 8GB, 1st Gen Iphone OS 3.1.3. When I first purchased the phone the volumn when receiving calls or making calls was clearly audible via speaker or holding to my ear. Fast forward 1.5- 2 yrs and now I can only make/receive calls with the headphones in! I have not altered anything, updated software, etc. not overloaded the phone. I don't get it. Any suggestions?

    Could be a hardware problem or failure.
    If no change after any of the standard troubleshooting steps which in order are power the iPhone off and on, a reset, restoring with iTunes from the iPhone's backup, and restoring with iTunes as a new iPhone or not from the backup, more than likely this is a hardware problem or failure.

  • Can only hear sound through headphones

    i can only hear sounds on my ipod touch through my headphones

    first try plugging and unplugging your headphones at least a dozen times really fast because somtimes the headphone jack sometimes has debris in it. i used to have the same problem.
    if that doesnt work restore it back to factory defaults by going to the setting icon then go to the general bar, after that scroll al the way to the bottom and click reset, then click reset all settings after that if it still wont work do the same thing accept click on erase all content and settings 

  • Can only hear a conversation if iphone 4 in speaker mode

    I just had my iphone 4 swapped out today.  I can only hear people speaking if i have it on speaker phone.  have not encountered this before.  has this happened to anyone else? could this be a setting issue?

    Hey oopsy daisy 113,
    I would check out the troubleshooting steps in the following article. While some don't seem like they directly apply to your situation, I'd pay special attention to steps 1, 8, 9, 10, and 11:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    All the best,
    Delgadoh

  • I made a project with multiple tracks and had it all panned and mixed.  Now it's only playing in the right speaker.  Not even regestering a left side in the master volume?  What happened, how can I get both sides back?

    I made a project with multiple tracks and had it all panned and mixed.  Now it's only playing in the right speaker.  Not even regestering a left side in the master volume?  What happened, how can I get both sides back?

    Thank you for that info.
    For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
    There are two issues with that file:
    The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
    Good luck,
    Hunt

  • I cannot hear the caller's voice when I receive a call. I can only hear them when I turn on speaker phone. What can I do?

    Even if I have a good signal on my iphone 4 I cannot hear any sound when I answer a call. I can only hear the caller's voice when I press the speaker phone button. Please help as have fiddled with setttings to no avail and taken out SIM card and restarted. No joy. Thanks.

    I have the same problem.. I am seeing any solution in other forums.. But lot of people seem to have the same problem

  • My iphone 5 recently got wet and now if someone calls me I can only hear them if the phone is on speaker. Can you please tell me what to do

    My iPhone5 recently got wet and now if someone calls me I can't hear them. I can only hear them if I put the phone on speaker. Can you plz tell me what to do

    Make an appointment with the Apple genius and get an Out of Warranty replacement for a fee.

  • I can only hear caller when I switch to speaker on iphone. The caller can hear me. Everthing else works as normal.

    I can only hear caller when I switch to speaker on iphone. The caller can hear me. Everthing else works as normal

    Try this:
    1. Reset the iPhone by pressing and holding the sleep/wake and home buttons and releasing them, when the Apple logo appears on the display. Now test again.
    2. If the issue persists: Restore the iPhone without any of your own content, using this description from Apple: http://support.apple.com/kb/HT4137
    3. If the issue persists, Your iPhone need repair.

  • How do I hear Garageband in multitask? I am playing guitar in GB using Apogee Jam. Would like to read lyrics in Safari while hearing guitar in background. But I can only hear GB when it is the active program. Sound stops if I switch to another app.

    How do I hear Garageband in multitask? I am playing guitar in GB using Apogee Jam. Would like to read lyrics in Safari while hearing guitar in background. But I can only hear GB when it is the active program. Sound stops if I switch to another app.

    http://ww2.cs.fsu.edu/~rosentha/linux/2.6.26.5/docs/DocBook/libata/ch07.html#excatATAbusErr wrote:
    ATA bus error means that data corruption occurred during transmission over ATA bus (SATA or PATA). This type of errors can be indicated by
    ICRC or ABRT error as described in the section called “ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)”.
    Controller-specific error completion with error information indicating transmission error.
    On some controllers, command timeout. In this case, there may be a mechanism to determine that the timeout is due to transmission error.
    Unknown/random errors, timeouts and all sorts of weirdities.
    As described above, transmission errors can cause wide variety of symptoms ranging from device ICRC error to random device lockup, and, for many cases, there is no way to tell if an error condition is due to transmission error or not; therefore, it's necessary to employ some kind of heuristic when dealing with errors and timeouts. For example, encountering repetitive ABRT errors for known supported command is likely to indicate ATA bus error.
    Once it's determined that ATA bus errors have possibly occurred, lowering ATA bus transmission speed is one of actions which may alleviate the problem.
    I'd also add; make sure you have good backups when ATA errors are frequent

  • I can only hear calls faintly unless I use speaker

    I can only hear calls faintly unless I use the speaker?

    Back it up in iTunes! Just make a backup of the entire device but make sure you check sync contacts and the option to add contacts from phone to address book on computer.

  • No sound in right speaker/headphon

    I bought the sound blaster Audigy 2 ZS and for while everything was working well. Than day i lost sound in my right speaker than i tried my headphones but my left speaker was fine i was still getting sound from only my left speaker/headphones. Thinking i had a damaged sound card i went out and got the sound blaster li've 24 bit. After i installed it the same problem was happend. I still dont have sound in my right speaker/headphone. I tried everything i updated my drivers and even changed my sound card pci bus slot and nothing worked. Right now i have the Sound blaster li've 24 bit installed.

    Hey, I've just had this same problem happen to me within the past two weeks except that it's with all my freakin' sound equipment (speakers/headphones/canalphones) and the last item happened within the past hour or so. I'm also using the Elite Pro ($375).
    It first happened with my 5. Klipsch speakers ($200) and I figured it was the speakers that went bad because all I get now is a loud shrilling sound when I power up without even having to play anything. However, about a week later, my Sennheiser headphones ($80) lost sound in the left side and I figured it was a huge string of bad luck since the audio problems were slightly different. This time though, like two days later, since I gotta have my gaming and also music, I hooked up my Shure earcanals ($75) and now the left side of those has almost disappeared like my other headphones. The right is real loud like normal with both, but almost nothing in the left side and/or completely gone and sometimes I hear a crackling shrill sound similar to the speakers.
    With all three of those going bad, it has to be the sound card. I swapped slots, reloaded drivers and all that, but I still have the problem. I even tested my headphones at least (not the speakers since they're bulkier) on my MP3 player, Nintendo DS, and other computer with an xtrememusic in it, and the left side of those headphones are still shot. Did the soundcard somehow disable the left sides and they can be reactivated somehow or are they now completely shot? What's up and can something be done about my sound card damaging those items? Cause now I'm PO'd as that's a lotta freakin' money. They outta be able to be replaced under the other companies warranties, but I don't want this problem to happen again if I receive them back.
    Thanks,
    - NMessage Edited by SLB on 08-27-200708:48 PM

Maybe you are looking for

  • Change browser title from framename

    Hello, I've created with robohelp 8 a WebHelp. The browser display's in the title bar the title of my project. Is it possible to change this title when you choose a topic? Like you click from the startpage (title=startpage) on topic A, the the browse

  • ESS SP11  upgrade error in travel request

    Dear All, We have recenlty up graded to ESS-SP11 package, The intial travel request is coming. But When I click on "dditional destination" or "Review" button , The following dump is coming. The same is happening in travel expense as well. The error i

  • Cisco ACS SNMP Traps

    Is it possible to send an SNMP trap from Cisco ACE 4710  for any configuration changes that  occurs? Regards, Hesham                 

  • ISE: PEAP-TLS

    Hi, I want to setup ISE for certificate authentication of the device + AD credentials (PEAP+TLS) as far as I understood it. I can't find any good example of how to setup ISE policies for this scenario. Client will use Microsoft CA and he will deploy

  • ACS AAA and LOCAL AAA database...

    Hello, We have implimented an 5520 device and configured it for ACS successfully. I want to also have a local database with a few accounts in the event our ACS server went down. I am having trouble finding documentation for the syntax I need to enter