Can only send e-mail from home wi-fi

I have three e-mail addresses that I use on the iPhone however for one of them I can only send e-mail when I am at home using my wi-fi. If I am anywhere else using wi-fi or 3G I get a sender address was invalid message.
Any suggestions?

Many ISPs only allow access to their smtp servers (the server that sends mail, which is different that the one for receiving mail) over their own network. Others require different settings when connecting from outside (which you're doing when you're on 3G/EDGE). Another option is to use AT&T's outgoing mail server to send. You can enable that in Settings > Mail, Contacts, Calendar > tap account > Outgoing Mail Server/SMTP > set AT&T SMTP server to ON. That way, the AT&T server will be used away from home (as long as you're connected to 3G/EDGE/GPRS - if you're connected to another Wi-Fi network it won't work) and your ISPs server will be used at home.

Similar Messages

  • I can only send e-mails from home wi-fi, how do I resolve?

    I can only send e-mails from my home wi-fi, when using other wi-fi's the message "The sender address was rejected by the server"
    What is the problem and how do I resolve?
    Andy

    How many other networks have your tried? It appears that the network(s) other than the yours is blocking the ports used for sending mail.
    Many businesses block sending mail.

  • I can't send e mails from my me account

    I can't send e mails from my me account

    can you recieve them?
    are your email accounts smtp settings set acording to the mail providers requirements?

  • Can not send e-mails from account but can receive

    I have my e-mail account with ATT Yahoo.
    I received an account verification notice yesterday from ATT and I responded and they said I was verified.
    However after I did that I could not send e-mails from my Imac desktop but I am receiving them.
    I spend 4 and a half hours, yes 41/2 hours with both Apple Care and ATT and they could not correct the problem. Both discussions were with upper tier support personnel.
    Here are some facts that make this an odd issue:
    (1)
    I have other e-mail boxes from ATT and they can send and receive e-mails.
    (2)
    MY laptop can still send and receive e-mails from the e-mail account that is only receiving with my Imac.
    (3)
    All the settings are exactly the same and both Apple Care and ATT checked them.
    Is there anybody out there that may have an answer ?
    Both Apple Care and ATT blamed each other.
    My concern is that today I received another e-mail trying to verify my e-mail address for another e-mail address from ATT.
    I called ATT and they did not know why, I DID NOT open it up and trashed it.
    ATT has put a filter on my other e-mail accounts and hopefully that will end any problems with them.
    The account that has the issue is my main account and I cannot trust leaving it and am trying to avoid having to change it.
    Greg

    Hi Rachel, For what it will be worth, I was like a dog with a bone about this, so I decided to give it another go. I have success on both boxes. Here is what I did, I warn you now it was a lengthy process. Before you begin download all the upgrade steps from X.5.0 to X.5.6 as single stages ( for me the combo's did not work) and have them ready to use.
    1st Backup all your mail to CD/DVD not on the box. Check for any unsent mails anywhere in the box and then throw out all of the mail bits that are anywhere on the system in any folder. 2nd Install & Archive, 3rd Start up from Install DVD and check/set permissions, reboot. Enter all your ISP details to mail, see if you can send a mail to yourself. If not dump all the mail you tried and the .plists, reboot and install next update in the series, enter all details as before, try and send etc. If this fails dump again and reboot install next update etc.
    I started at X.5.1 and got to vX.5.4 before I got a result in that sys asked me if this server will do, I said yes and I got mail out. The server name was different that was offered but when all was over it showed as the correct one that it should be on port 995. I must add that I had the spinning cog wheel for quite some minutes before anything happened. I continued on this way for the rest of the updates. 1x1 until v.6 was reached. That was only on the G4, I now had to do it all again on the MacPro. This one was not so co-operative in that I had to do it twice, but now it also has Mail running. It is funny though that I had to reach X.5.4 on both machines before it came right. On the G4 I was using a retail disc and on the Intel the supplied for discs.
    Others on here may have a better and quicker way, but for me this did work. I am sure that there is a problem in either the mail app itself or the production of the Master DVD's.
    Whatever, good luck.

  • CANNOT SEND OUTGOING MAILS FROM HOM

    i am unable to send outgoing mails with my computer from home and other few locations. However, in other places such as public libraries, coffe shops, apple stores etc the outgoing mail works perfectly. does anybody know where the problem can be? i work from home and is getting me out of my nerves. Thank you for the help

    Does web mail work?
    Have you checked the outgoing mail server settings?
    That's the smtp address of your internet provider.
    You may need to change the outgoing mail server for each location.

  • Can only send small mails

    Here is my problem - I can only send very short mails with a few words (size 0.0 or 0.1 Kb). If the mail is at a normal size, the mail starts to send, the mail activity ticks down to 0Kb, but then the little circle just keeps spinning around, and the email is not being delivered.
    I am using the mail program in mac, and have tried with entourage. Both have the same problem.
    After a minute it pops up with a message "cannot send via the server". I click on "help to cennection", and then it shows that status is ok and there is connection to my server.
    I can use the same mailserver on my win-pc without any problem. I have checked the ports numbers for my mail servers on my mac-mail-program.
    Has anyone expierenced this problem? Has someone a solution?

    Hi Timmy and Ernie and everybody else
    I have tried the things you have mentioned, check/uncheck ssl, check the ports, cable to router and back to wireless (yes i am using wireless).
    I set up the accounts from scratch. Maybe i have a certificate problem. It shows to two certificates - "UTN-USERFirst-Hardware" this one is OK, but underneath i can see "*.arrownet.dk" and this one is not valid. Arrownet is my internet-provider, and my outgoing smtp-server is named "smtp.arrownet.dk". It checks the servers after i have typed the info for POP-server, but i figure i might have a problem here.
    I have talked to arrownet, they know not of the problem. And again, it works perfect on my win-pc. Think i am about to try an older version of mac os-x, could that maybe solve my problem?
    henls

  • Can you send e-mails from ipod touch using a .mac alias?

    hi everyone,
    i have a number of .mac email aliases set up on my email account, for instance for signing up to websites. when i send e-mail on my mac, i can select which alias i want the e-mail to be sent from. however, i don't seem to have that option on my ipod touch - mail is automatically sent from my main mac.com e-mail address.
    is there anyway to send e-mail from one of my .mac aliases on my ipod touch?

    Not at this time, no. You can submit a feature request to Apple:
    http://www.apple.com/feedback/ipodtouch.html

  • My @me emails don't push and I can't send @me mails  from the phone

    Hi all, for the at least the fourth time since I've had it my 3G iphone has stopped receiving push mobile me emails.
    I also can't send emails out from the @me address on the phone (although I can do perfectly from my MBP)
    Is this a common problem? is ther any fool proof way of fixing it? Are there any settings I should double check?
    The account was set up by my mac when I first synced it to the phone, I have reset all the mail account settings using the tick box in itunes.
    Any help appreciated!
    Cheers

    Sending has never been a problem with my MM account, which is a former .Mac account that I accessed with my first generation iPhone for over a year and for the last 6 months with my iPhone 3G. I prefer not accessing my MM account via push for email - automatically fetching every 30 minutes is fine with me as there is never any email sent to me so important that I need to be notified and the message delivered as soon as the message is recieved at the incoming mail server, so I can't comment on push access not working properly.
    I suggest deleting and manually recreating the account with the iPhone's mail client - disable including the account settings being transferred to your iPhone via the iTunes sync process followed by deleting and manually re-creating the account with the iPhone's mail client.

  • I can't send e-mails from my hotmail account with my Macbook

    Please help, I've noticed recently that I am unable to send e-mails from my hotmail account from my Macbook. I was able to send e-mails today from work (non-macbook). It's getting stressful as I have no idea what to do!

    We took our MacBook Pro to the  apple store, after a long trial and error, they FIXED the  problem!
    It turns out that one of the files was corrupt, it was either Java or Silverlight.
    My suggestion to you is to remove Java than restart and then reinstall Java. See if hotmail works. If not, than, remove Silverlight reboot than reinstall Silverlight.
    For us, it was one of those two files that were corrupt and that was causing hotmail to not be able to send email.
    I'm not sure what the procedure is to remove and reinstall files, all I know is that my wives MacBook can now send email using hotmail.
    Hope this helps.
    Stephen

  • I can't SEND e-mail from an account on my iPad 4, that CAN receive -mail

    Hi Again,
    I am hoping someone on this forum will possibly have an answer to a very confusing problem.
    I can't seem to get one of my e-mail accounts to be set up 'properly' on my iPad 4. The account in question is an account from BT, which has @btinternet.com at the end of it. I have 'installed' and deleted this account more than ten times. When setting up this account (as with all other accounts that DO work properly), the only info I am 'asked' to input is my name, e-mail address and password, in the 'text entry spaces' that relate to the INCOMING mail server. When this is done I USUALLY see the word 'verifying........' Then the 'blue tick marks' confirming that the info I have entered is correct. The validity of this info is also confirmed by the fact that this account can RECEIVE the e-mails sent to it.
    Each of the last four or five times I have deleted this e-mail account and re-installed it I have NOT seen the word 'verifying.....' And I have NOT seen the aforementioned blue ticks. Selecting 'done' after re-entering my info just makes this settings box disappear, rather than show the verifying and the blue ticks, which then allows me to see that the account is 'properly' set up - or should be anyway.
    Even so I still get all the e-mails again, but still cannot SEND, OR REPLY
    The error message I get every single time I try to SEND, OR REPLY using this same e-mail account is:
    'Cannot Send Mail'
    'The username or password for SMTP: ***********@mail.btinternet.com is incorrect'
    My username and password are NOT incorrect. The set up process does not even ask for a username or password for 'SMTP'!
    Even if I go further into the settings for this account, I can find two spaces where I COULD put a username and password, for SMTP, but these spaces already have the words 'optional' in them so they are not supposed to be 'required'. Even if I DO put in these spaces my surname and password for this e-mail account it does not make any difference.
    I have tried 'switching on' the 'other mail servers' which are shown below the 'Primary mail server' in another settings box, for the btinternet.com e-mail account settings, but this still does not stop the error message, AND the e-mail in question is then actually sent from one of the e-mail accounts connected with the 'other mail servers' - I know this because it appears in the 'sent' items folder of whichever account my iPad has decided to use at the time (not always the same one either). It also appears in the sent items folder of the account that I TRIED to use, despite the fact it was NOT sent from this account, and the error message said I cannot send mail (from this account).
    I have contacted Apple Tech Support and they have told me that the problem is NOT with the iPad, it is with the 'account provider'. This is because they say that the info held and used by BT - the info that is used as the 'correct info', that is compared to what I have put in the set up boxes on my iPad - IS actually the info that is incorrect despite the fact that the info I use on my iPad and the info I use on the BT website (which was originally determined by ME when I first got my account) and is held by BT, is the info that is causing the problem of the error message. To put it another way, the info referred to in the error message is NOT incorrect, the error message is incorrectly generated.
    Typically, BT have tried to deny the problem is caused by them because 'the info referred to' - which is my e-mail address and password - works correctly an ALL places that is supposed to work (on the BT website) AND works with the BT/iPad applications like BT Wi-Fi, BT Smart talk, etc. :( :( :(
    Any help or advice that anyone could give will be very greatly appreciated
    Many thanks
    Bob

    Update to above question:
    Hello All,
    To anyone with the same problem described above, on THEIR iPad (if it is running iOS 7.0.2):
    Go to Settings; Mail, Contacts, Calendars; DELETE your *******@btinternet.com e-mail account, that you originally set up either using 'Other', or the 'BT' option which I am sure was in the list previous to the iOS 7 update.
    Then ADD a NEW account choosing YAHOO from the list of options. DO NOT USE 'OTHER'.
    Enter the correct details just as you (almost certainly) had already done in your previous attempts using 'other'.
    When you see the 'verifying......' and 'the blue ticks' you should be able to exit settings and open your mail app and then receive all your 'old' e-mails again, AND be able to SEND as well.
    All my 'old' e-mails, were NOT found in the 'old e-mail' folder though. THEY are still in my inbox.
    So this fix worked for me.
    After I deleted my account from 'OTHER' and put it in Yahoo, I like other people also ended up with more folders.
    I hope this works for you on YOUR Apple devices.
    Bob

  • Why can't I open "mail" from "home page" any more?

    Until today I could open yahoo! mail from a link in the upper left hand corner of my "home page." The link is gone and now I have to Google "Yahoo! Mail" to open mail. From mail I can go to home page by clicking on the house icon but not vice versa
    == This happened ==
    Every time Firefox opened
    == Today

    So... You want your home page to be Yahoo! Mail??

  • Whts size limit of UTL MAIL VARCHAR2 can i send large mail from utl mail?

    hi
    i like to send email from oracle as attachment
    is there any facility to send large email from oracle UTL MAIL utlity
    and i want to attach my file to email which is on server at particular
    can i attach file directly from server?

    See, http://www.psoug.org/reference/utl_mail.html
    might help you.

  • Can't send .mac mails from phone

    Hey guys I just got a Nokia E61i and i can't seem to figure out how to set it so i can send from my .mac...I've worked out how to recieve mails but can't send (had the same problem on my palm treo).
    Can anyone let me know what settings they are using?
    thanks!

    You probably have to use the outgoing mail server (SMTP) of the provider you are connecting to the internet through.
    For instance, for me in the UK on the O2 network, I have to use smtp.o2.co.uk

  • TS3899 Can't send e-mails from my iPod or receive from other Ipods

    When trying to send an e-mail to an other iPod touch I get the message "Cannot send Mail" An error occurred while delivering this message.  Now, I can send e-mails to other recepients that don't use an iPod.  Also, I can't receive any messages sent from other iPods   Please help!

    Try here for the Messages problem.
    iOS: Troubleshooting Messages
    For the email probl it appears you made an error in entering the setting for the mail account. Frequently it is easier to delete the account on the iPod and reeenter the setting rater than find the error. If yuo are unsure about the settings, Google for: setup XXX mail on iPhone. Where XXX is your provider.

  • Can't send iCloud mail from Outlook 2011

    I have recently installed Office 2011 for Mac on my Macbook Pro and I want to set up my iCloud mail on it.  I can receive mail just fine but I can't send mail at all.  I keep getting error code 17092 saying that the SMTP server doesn't recognize any of the authentication methods supported by Outlook.  How can I fix this problem or do I have to just use the native Mail app?  Any help will be greatly appreciated, thanks!

    I was having the same issue. I was able to fix by login into appleid.apple.com and setting my @me as the primary email adress.( Make sure you verify it) The deleted your i cloud account on you Iphone, Ipad or Touch then added it again. You should be able to send email using icloud

Maybe you are looking for

  • Issue with the configuration of http xml port for sending the idoc

    Hello,       I am planning to send multiple idocs in a single file using http xml port. Presently I am trying to send a single idoc, but am having the issue. I am trying to create a RFC for HTTP XML port of type H i.e. HTTP Connection to ABAP System

  • How to get the mainframe of the page?

    Hi All, Indesign Document is having the textframe threaded from first page to last page, in a perticular page i need to collect that threaded frame. how can i continue with this? Regards Sanjeev.k

  • Filter out two dates in Infopackage on the same field

    Hi! I have this code in a infoPackage that gives me the current month intervall (if not the day is the first of a month, then it gives me previous month ). I need to add a change to this code. I would like to also filter out the date '25001231' (this

  • Pricing doubt

    My current system configuration PR00 = Base Price = 3.64(Commercial rounding in condition type) Quantity in Sales Order = 50 So condiiton value = 50 * 3.64 = $182 Plus Tax = MWST (say at 10%) = 18.20 Total selling price = $200.20 But from the custome

  • Accidentally erased "Settings" app / icon. How can I recover it?

    I just don't have the icon anymore, and now I cannot change to wifi mode, I only can get access to data through 3G. I looked for it on the iTunes, but it doesn't appear there neither under my apps. What should I do?