Can' open certain articles on racer x. It was working fine until 9/24/12. Maybe it is related to the software update IO S6

I have experienced issues on certain web sites not being able to open some articles. Everything worked fine until 9/24/12. Perhaps it is related to the software update IOS 6.
The web site I open a lot is Racer X and that is where I have the issues!
Anyone any suggestions or have the fix for it?

Reinstall Safari 5.1.1
If that doesn't help install the Mac OS X 10.6.8 Update Combo. It's ok to do this even though you are already running v10.6.8.
Restart your Mac after installing software.

Similar Messages

Hi Forum, can u please help? iRecently bought a mac pro & my garageband 11 was working fine but now it's showing a question mark in the dock but it won't open. I think it may have been accidentally trashed. I've searched the trash & spotlighted. What now?

Hi Forum, can u please help? iRecently bought a macbook pro and garageband 11 was working fine but now it's showing a question mark in the dock and it won't open. I think it may have been accidentally trashed. I've searched the trash and spotlighted but don't know what to do next. Any ideas? Thanks.

How did you install GarageBand on your Mac? Did it come preinstalled with the other iLife applications?
If your MacOS supports the AppStore, you should be able to redownload GarageBand from the AppStore, see this support Article: OS X: About OS X Recovery on how to download again:
Double-click the App Store icon in the dock.
Enter your Apple ID and password.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your Lion based computer. Your account will not be charged for them. Click Install to complete installation of your applications.
Regards
Léonie

I keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help

i keep the itunes encountered a problem and needs to shut down . it was working fine until after i updated to 10.5 can someone plz help

I did get a "server busy" message when I loaded quicktime, but I'm not sure if it is related or not since I've been seeing that over the last couple of days, I can't remember if it came before iTunes stopped working or not. That message reads "This action cannot be completed because the other program is busy. Choose 'switch to' to activate the busy program and correct the problem." My options then are to choose switch to or retry. When I press "switch to" my Start menu opens, and nothing appears to happen when I select retry.
that's an odd sort of a message (or series of messages).
hmmmmm. let's try an experiment aimed at working out if there's a program interfering with the QuickTime (which is in turn causing grief with your iTunes).
try a selective startup using MSCONFIG, with just the itunes and QuickTime background processes enabled, as per the following document:
Using MSCONFIG to troubleshoot conflicts in Windows
does QT open without the strange message after the selective startup?
does iTunes launch properly?

Gmail on iphone was working fine until yesterday when it prompted me with the message cannot get mail user name or password for gmail is incorrect, i have tried deleting the account and re-created a new account, same problem, can anyone help?

gmail on iphone was working fine until yesterday when it prompted me with the message "cannot get mail user name or password for gmail is incorrect", i have tried deleting the account and re-created a new account, same problem, can anyone help?

paulcb, you're a genius, it worked, thank you so much, you don't know how much stress you have taken off my shoulders, I am constantly on my email in my iphone everyday. Thanks a million, take care. Robert.

HT201210 I have Geo Asian TV App on my IPad which was working fine before loading ios6. Now if try to run the video in this app, it says adobe reader or html5 required. Can you help

I have Geo Asian TV App on my IPad which was working fine before loading ios6. Now if try to run the video in this app, it says adobe reader or html5 required. Can you help

It may have used the YouTube app that is no longer included in iOS. Try downloading the YouTube app in the App Store and see if it works.

Why can't I get my mail, I get a message "connection to server failed" but I can get on all other web sites. It worked fine until about a month ago.

WHY CAN'T I GET MY MAIL, I GET A MESSAGE 'CONNECTION TO SERVER FAILED" BUT I CAN GET ON ALL OTHER WEB SITES. IT WORKED FINE UNTIL ABOUT A MONTH AGO. I CANCELLED MY ACCOUNT, PUT MY INFO IN AGAIN AND STILL GET THE MESSAGE "CONNECTION TO SERVER FAILED" HELP PLEASE!

have you tried removing and readding the e-mail account? sometimes settings get corrupted or changed on the server end...something computers can sometimes handle better than the mail interface.

My mail was working fine until yesterday. Now it says that mail connects to the internet - but something wrong with the ports. I have spoken with talktalk - they can't help, Ithe major problem being that I have forgotten my password!

Hi, I'm working on an Imac, yesterday email was working fine, now nothing is happening. It says that I need a password to check details - this I can't remember, it doesn't seem to be the same as the one I use to log on to mail through browser (talktalk) - message says can connect to internet but error with port settings etc which need verifying. Talktalk unable to help further - but as I can't get past password page I am very stuck. Any one help as to how to find out password.... have tried to make a new account but that doesn't seem to wrok either. Am wondering if fault is with computer. Thanks.
imac 10.10.1

TalkTalk E-mail Setup See post by Csound1

I am trying to export a video from Premiere Pro. I have both audio and video checked and the sequence is active but only the audio exports. There is no video at all. Can anyone tell me how to get the video to export. It was working fine until today.

Premiere Pro CC has been working fine until today. I have completed my sequence and it is active. I have both audio and video checked when I am exporting using H.264 with Match Source Hi bitrate. I am choosing entire sequence. The audio exports but the video and title does not. Can anyone tell me how to troubleshoot this so I can complete this project? Please!

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

AirPort Extreme wireless was working fine until I tried to add the extreme to extend network range...now neither is working and I can't fix.

Help please? I got the Express yesterday and had it set up and working fine. However I found the signal and connection wasn't going far enough/fast enough for all areas of my home I wanted it to. Today I got the Extreme. I unplugged the Express, plugged in the Extreme and set up the new wireless network for that one just fine and it was working great. However, I still wasn't getting quite the connection/speed I wanted through out my house, so I tried to add the Express to extend the network I set up from the Extreme and now neither one is working. I tried resetting and starting over from the beginning but I can't even get just the Extreme to work by itself and am not sure what to do.

The following are the basic steps to configure an extended network with two 802.11n AirPort. Please take a look to check if anything was missed when you configured yours.
Dynamic WDS - Extending a Wireless Network Setup
If practical, place the base stations in near proximity to each other during the setup phase. Once done, move them to their desired locations.
Open AirPort Utility, and then, select the base station that will connect to the Internet.
Choose Manual Setup from the Base Station menu, or double-click the base station to open the configuration in a separate window. Enter the base station password if necessary.
Click AirPort in the toolbar, and then, click Wireless.
Choose “Create a wireless network” from the Wireless Mode pop-up menu, and then, select the “Allow this network to be extended” checkbox.
Next, select the base station that will extend this network, and then, choose Manual Setup from the Base Station menu, or double-click the base station to open its configuration in a separate window. Enter the base station password if necessary.
Choose “Extend a wireless network” from the Wireless Mode pop-up menu, and then, choose the network you want to extend from the Network Name pop-up menu.
Enter the base station network and base station password if necessary.
Click Update to update the base station with new network settings.
(ref: Pages 43-44 of Apple AirPort Networks.)
(ref: Wi-Fi base stations: Extending the range of your wireless network by adding additional Wi-Fi base stations)

Hello my question is why do i get a error message now that I have done alot of updating of my system it old, but I got it back up and running Itunes was working fine until in an update of the system files then Itunes can't burn the play lists to the

Hello
I recently had to reinstall my software for a
dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has done alot of updating of system files....now the itunes does not burn to my cd...error message 2131 this time ..this has occurred several times on this sytem and and as well as other system this one has window vista 64 bit home prem. why is the itunes not working to burn my disks
it worked fine before the updates to the system and the itunes software is up dated as well...can someone suggest something
thanks for your time in this matter
sadeyesjlee

I recently had to reinstall my software for a
dell computer a dell latitude d 830, then after installing all of my software and such including itunes the player did well even record to disks with no problems now that my system has done alot of updating of system files....now the itunes does not burn to my cd...error message 2131 this time
The 2131 usually indicates firmware needs to be updated on a drive.
Head to your drivers and downloads page for your latitude at Dell, and check for updates to your firmware for your optical drives. If you're behind and you update, does that clear up the 2131?

How can I set service preferences with Safari 5.0.5 and os 10.6.8? Was working fine until combined update install.

My service preferences won't set after installing combined update earlier this week and the security 2012-4 update that caused so much problem with mail. Is there a list of changes that was made in safari with this latest update, because the bookmarking isn't working the same and the readling list page is gone?

because the bookmarking isn't working and the same and the reading list page is gone?
Your profile indicates you have v10.7.2 installed yet your topic refers to v10.6.8 (Snow Leopard).
Try this...
Open System Preferences > iCloud
Deselect the box next to Safari then reselect it.
Give iCloud a few minutes to re sync your bookmarks and reading list.
Safari 5.0.5 is an outdated version. You need to update Safari.
Click your Apple menu icon top left in your screen. From the drop down menu click Software Update...
Restart your Mac after the updates are installed.

I upgraded iTunes to 11.1.5 with Snow Leopard. I was told that shouldn't have taken place despite being suggested by the software update notice. At that point it wouldn't open. I then upgraded to Mavericks, but it still doesn't start despite clicking.

I had been using an old iTunes program. This was with Snow Leopard. I bought a Nano 7, but it wouldn't work with the old iTunes. I upgraded to the newest edition, but then iTunes wouldn't open. I was told by Apple that the computer shouldn't have downloaded the latest iTunes (but it did). I was told I needed to upgrade to Mavericks.
So I di. iTunes still won't open, whether from the doc or the Application file. I tried to delete it and reinstall, but the computer won't let me. So how can I get iTunes to work?
Thanks!

Version 11.1.5.5 of iTunes was just released today. If you update to that, does that help with the recognition troubles?
http://www.apple.com/itunes/download/

App store working but can't find any apps I type in the search. Was working fine until yesterday

I have an Iphone 5 and NO problems until today. I was still able to go to the app store thru my phone and type in apps in the search field and was able to download apps... However I can still download apps right now but anything I type in the search field it can't be found.. Even if I type in apps names that I already downloaded. Or apps that I know the name of that exist... It seems it searches for a couple seconds, then stops and the screen just stays white... HELP!!!!

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

My ipod was working great until when i went to use it,i saw the screen was white/white. How can i get it to work again?

Sometimes my Ipod Touch4 will ave some glitches and go back to normal. Yesterday i was using my ipod as usual and after an hour i was going to use it again but it had a blank/white screan. What can i do to get it back to normal?

That symptom is covered here:
iPod touch: Hardware troubleshooting

TS5329 i did an update on my sons phone and now it is in recovery mode and than refuses to reboot. says it can not restore? it was working fine until it called for this update and while doing it it went into recovery mode?! please help!!!

i did an update on my sons iphone 4s and now it says it is in recovery mode and that it can not reboot or restore the phone?! it will not power down normal and keeps saying hook to itunes. all i did was an update and it went into recovery mode and will now not restore! how do i fix this???

Do exactly as it says, connect to a computer running iTunes and restore.

Can' open certain articles on racer x. It was working fine until 9/24/12. Maybe it is related to the software update IO S6

Similar Messages

Maybe you are looking for