Can Operations Manager discover and monitor IPSEC VPN state

Hello everyone
Can Operations Manager discover and monitor IPSEC VPN state?
We use Vyatta routers in different locations, these are connected over GRE IPSEC VPN tunnels, SCOM has discovered the tunnels successfully which is great, but the technical team informed me that the tunnels state always UP even when the IPSEC VPN
goes down "I believe they configured keep alive option on the tunnels, I don't know why" hence i have to monitor the IPSEC VPN health state instead of the tunnels themselves, any idea, if you inform me the steps required to create new management
pack i will try this..
Thank you
Mohammad
Mohammad, IT NOC Team

The IPsec status info is provided by SNMP trap. You need to make sure the SNMP trap is enabled on the router.
Also, you can verify it by SNMP Trap Viewer.
Juke Chou
TechNet Community Support

Similar Messages

SCOM - How internally classes and properties, discovered and monitored

I am trying to understand how internally classes created instances, and how it runs in the agent, discovered and monitored in the state view.
Need to understand this for Create my own design and develop complete management pack, to display some hard coded value to be displayed in the state view. Both target and source will be my scom server itself.
Thanks and Regards,
Boopalan

Adding more info:
How to Create a State View
http://technet.microsoft.com/en-us/library/ff832979.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

HT4437 Can't get iTunes and monitor mirroring to work at the same time.

When I turn on my airplay on itunes it turns off the airplay from my monitor. I don't know how I've done it before but I sometimes can't play itunes and have it mirror my screen at the same time so I can use the visualizer. Whenever I turn one on, the other shuts off. I've done it before. Is there a specific sequence you need to run itunes and have the mirroring work too?
Ak

You might try a simple headphone splitter like this:
http://www.amazon.com/Belkin-F8V234-WHT-APL-Headphone-Splitter/dp/B0000UV2AW

I can't manage file and storage services in server manager.

I have a windows 2012 R2 server. I had turned on the file and storage services role and was able to configure a single share in server manager. A few days later I wanted to create another share but when I select file and storage services within server manager
I get the message at the top that says The server has not been queried for data since it appeared offline. Also there are no shares listed. Even though the shared folder that I already created is available from other computers.
If I try to create a file share anyway I am asked to choose a server to create the share on and the server appears in the list with a status of offline.
Now this may seem like an obvious connection issue however, I am trying to configure the server locally, not over the network. I can manage other services in server manager just fine. I have WDS and WSUS roles installed and can be configured with server
manager just fine. I only have a problem with file and storage services.
There are no errors in the event log.
I tried to remove the file and storage services role from the server but as soon as I uncheck the box for file and storage services I get a pop up windows that says:
The validation process found problems on the server from which you want to remove features. The selected features cannot be removed from the selected server. click ok to select different featres.
I lists validation results that simply state the name of the server and says "storage services cannot be removed."
How can I get file and storage services working again?

Hi,
How many servers are there in the list? If the offline serve is a remote server, please reboot the remote server to see the result. In the meantime, please new a shared folded on the local server in Windows Explorer to see if the issue still exists.
Please refer to the article below to share a folder with server manager.
12 Steps to NTFS Shared Folders in Windows Server 2012
https://blogs.technet.com/b/keithmayer/archive/2012/10/21/ntfs-shared-folders-a-whole-lot-easier-in-windows-server-2012.aspx#.Ux1ty_mSwXV
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

LR Color Management - Calibration and Monitor (not your typical post)

Hi everybody,
I see that there are still many issues around color management and printing in LR. I have had similar problems in past and Im still trying to work though them. The most touted problem is not calibrating or having a bad monitor profile. Well, I have tried calibrating my display with worse results. I get better results with an un-calibrated display, not exact results, but closer than with a calibrated display. My only computer is a Dell Latitude D830 with an LCD display and Nvidia Quadro 140M graphics card with a Spyder2 Suite calibration tool.
After doing a fair bit of research online and speaking to other photographers (pro and amateur) Ive learned that laptop displays are notoriously difficult to calibrate due to their inability to display a wide range of color and contrast. There is also no way to adjust white point, RGB or any other setting on my display, only brightness and contrast. (perhaps a big part of the problem?)
I was told that only high end displays (NEC, LaCie, Eizo etc @ $1000,00 this being the low end, and up) were the only way to get accurate colors. Others had said that LG and Samsung make a decent display at the $300.00 price point that would deliver good results but not pro level color management. Other than that go, back to an old CRT display. What is a semi-pro level display that renders excellent color that I wont have to re-mortgage my house to pay for?
So heres my question to all of those who have said you need to calibrate and you have a bad profile can you please tell us your system set up (i.e. display, calibration tool, room lighting and set up etc..)?
Im really interested in what you are doing more, better or differently than everyone else.
Thanks,
DC

>Im really interested in what you are doing more, better or differently than everyone else.
Nothing much. Same calibrator in addition to another Huey Pro which gives almost indistinguishable results. I use both a Apple Mac Book Pro and a Mac Pro with a 30" DELL wide gamut adobeRGB display. Colors on the two are identical (if they're not outside of the laptop's gamut) and identical to prints from labs and direct prints. Of course these displays are between far better and quite a bit better than the display on a typical Dell laptop that are notoriously bad. One of the things I have to do on the laptop is to get the display at the right angle. The trick I use is to have a window open with this image: http://www.normankoren.com/monitor_test_txt22.png
from this website: http://www.normankoren.com/makingfineprints1A.html
If you're looking at your monitor at the right angle and you have calibrated the display correctly, the color should look homogeneous (i.e. completely neutral and the same grey everywhere). If you cannot find an angle at which this is correct, than it is likely your monitor can simply not be calibrated or that your calibrator is defective (there was a batch of defective Spyders a while ago). In general, it is certainly not true that laptop displays cannot be calibrated.
>I was told that only high end displays (NEC, LaCie, Eizo etc @ $1000,00 this being the low end, and up) were the only way to get accurate colors. Others had said that LG and Samsung make a decent display at the $300.00 price point that would deliver good results but not pro level color management.
They are quite wrong and a rather snooty thing to say. The point of these high priced displays is that they will give better color in [B]non[/B]-colormanaged applications, but with a good calibrator, a reasonably good screen and [B]correct color management [/B](such as that in Lightroom, Photoshop, preview.app, Safari, etc.) you will get about as good color as the more expensive displays. Some of these, such as the EIZO give you wider gamuts higher bit color, or hardware adjustable white point, which are also a major selling points if you're doing very critical work but only if paired with good calibration and managed apps. Pro level color management is a function of the calibrator and the software - and only in part of the display. Most displays, with a few exceptions, can be made to give good color, as long as you use a hardware calibrator and managed apps.

Hub and Spoke IPSec VPN

Guys,
When it comes to creating a site to site VPN on Cisco IOS, I have a clear understanding of that from a 1-1 perspective4. However, I now need to extend that site to site VPN to have now more like a hub and spoke, 1 to many.
So basically for a 1 to 1 site mapping I would do something like below. I would appreciate some suggestions on how to extend this or redesign it to suit. Thanks
crypto isakmp policy 10
hash md5
authentication pre-share
group 2
lifetime 28800
crypto isakmp key nik address 0.0.0.0 0.0.0.0
crypto ipsec transform-set mySet ah-md5-hmac
crypto map myMap 5 ipsec-isakmp
set peer xx.0.0.2
set transform-set mySet
match address CW-VIC
interface FastEthernet0/0
ip address xx.0.0.2 255.255.255.x
duplex auto
speed auto
crypto map myMap
ip access-list extended VPN-TRAF
permit ip 192.168.0.0 0.0.0.255 192.168.10.0 0.0.0.255

Guys,
I've figured this out.
For anyone else in the future having this issue
While you cannot add more than one crypto map to the interface, you can add numbers at the end of the map.
--- PEER 1
crypto map myMap 5 ipsec-isakmp
set peer X0.0.0.2
set transform-set mySet
match address 100
access-list 100 permit ip 172.30.0.0 0.0.255.255 172.17.10.0 0.0.0.255
--- PEER 2
crypto map myMap 20 ipsec-isakmp
set peer Y0.0.0.2
set transform-set mySet
match address 102
access-list 102 permit ip 172.30.0.0 0.0.255.255 172.16.10.0 0.0.0.255
Hope this helps someone in the future

Can I attach Keyboard and monitor to this laptop?

can''t find labeled photos to show me where I might attach a keyboard and a monitor to my 3000 N200. Can anyone help please?

Thanks. I attached my keyboard no problem. I rebooted and it works.
I also attached my Hanns-G plug and play monitor but it does not work. I have a cd, should I use the cd to install it? They guy in Atlanta wouldn't help but did say that I had to "point"" my settings to the new external monitor but I couldn't find where to do that. I looked in hardware and although keyboard was listed I didn't see this monitor.
So,
a- do I use the cd?
b- how do I point to this external monitor or don't I have to do that once I use the cd?
Thanks!

Operations Manager - KMS Idle Minutes Monitor Alerts - False Positives As Event ID 12290 Still Being Logged

Hi all,
I am using System Center 2012 R2 Operations Manager with the Key Management Service Management Pack at version 6.0.7234.0, and I keep receiving the following alert in Operations Manager:
"Idle Minutes Monitor Alert:
Key Management Service (KMS) inactivity exceeded threshold
Knowledge:
Summary:
The purpose of this rule is to alert system administrators to a possible KMS or network outage. This rule monitors the end-to-end operation of KMS activation. A notification event is created by KMS if no activation or renewal requests were logged by KMS
(activity event 12290) in the specified time interval. In addition to new activations, periodic renewal requests are expected to occur (default is 7 days). Whether or not this alert is serious depends on the number of machines in the KMS environment, how many
are actually connected, and the configured renewal interval.
Causes:
Any failure or incorrect configuration of the KMS service, other Windows components, firewall, hardware, network or routers can trigger the Idle Minutes Alert. This alert can also result from normal behavior, since it is possible that not enough machines
attempted to activate or renew during the specified time interval.
Resolutions:
The first step is to determine whether there really is a problem. Start with a known good KMS client and run (with elevated privileges) the script slmgr.vbs -ato . If the activation/renewal fails, it will report an error code. You can direct the client to
connect to a specific KMS machine by using the slmgr.vbs -skms option. The request event (12288) and response event (12289) in the Windows Application event log may provide additional information, including the identity of failing KMS machines. If there has
been a failure, check the following:
Software Licensing service (slsvc) is running.
Other KMS machine behavior is normal.
KMS firewall port is open (default is TCP 1688).
Attempt to connect to KMS using telnet to the KMS port(you won’t be able to do anything other than connect)
Use a network monitor (e.g. netmon) to capture and trace network problems.
There is one Idle Minutes Monitor that is used to monitor for activity. It may be desirable to adjust the time threshold, depending on expected KMS activity."
Despite what the alert says, there are activity events with ID 12290 being logged, but they are appearing under the 'Key Management Service' log instead of the general 'Application' log. I know that my clients are activating with the server without
any problems as I have run slmgr.vbs -ato with success on a number of them, and none are stating that activation is required. This issue was previously raised here:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/1391acf8-f0be-4a48-9039-8d24e275f1fd/kms-idle-time-monitor-raise-wrong-alerts?forum=operationsmanagermgmtpacks, but I am running Windows Server 2008 R2 SP1 and the hotfix KB981314 comes
up as 'not applicable to this computer' so I assume it is part of SP1 now. I have also tried installing KB2692929, as that was cited as being a possible fix here:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/8ec8ae5b-a310-4b0f-9a5f-e0599bceb93a/kms-managementpack?forum=operationsmanagermgmtpacks, however I am still seeing the same alerts.
Would greatly appreciate any further suggestions!
Many thanks

Hi,
I've checked for all the events that are generated by our servers, and there are periods of time where no requests are received for up to 18 hours, so that is no doubt why the alerts are appearing (we then sometimes see five requests in the same minute,
but there we go). I'll need to adjust the thresholds.
Thank you for your help, Chunky.1, I'll mark your reply as the answer, as it was very helpful in understanding the alert.
For anyone else who needs to check this, create a PowerShell script using the following content, and place your own details into the relevant sections in bold (without the brackets, of course). This will generate a csv file which will have the server
name in one column and the time that the request event was generated - you can then check the gaps between the requests. The script is quick and dirty, with no checks along the way, so feel free to embellish it as required.
Out-File "<directory to place file in>\KMS_check_results.csv"
$results = get-eventlog -ComputerName <KMS server hostname> -logname 'Key Management Service'|where{$_.message -match "<String which identifies servers instead of clients>"}
$filteredresults = @()
foreach($event in $results){
    #This splits up the message into sections, separated by commas, and places each section as an element in an array
    $event.Message -split ","|foreach{
        if($_ -match "<server domain suffix - e.g. contoso.com>"){
            $eventserver = $_
    $timegenerated = $event.TimeGenerated
    $filteredresults += New-Object PSObject -Property @{
        Server = $eventserver
        TimeGenerated = $timegenerated
$filteredresults|select-object server,timegenerated|export-csv "<directory to place file in>\KMS_check_results.csv" -NoTypeInformation

After creating a Powershell script monitor - how to import in Operation Manager 2012 ?

Hello!
I just completed all the steps in this article:
http://social.technet.microsoft.com/wiki/contents/articles/16752.management-pack-composition-exercise-2-creating-a-monitor-based-on-a-windows-powershell-script.aspx?CommentPosted=true#commentmessage
So now I guess that the just created Management Pack should be imported in Operation Manager 2012, and then also folders and views should be created in order to have it showing green/red based on the values returned by the script.
In the article there's no pointer to that procedure, so can you please provide a good link where the steps are explained?
thanks!

Have a look at the following video, it steps through how to create rules and monitors using PowerShell scripts
https://technet.microsoft.com/en-us/video/how-do-i-create-a-rule-and-monitor-using-a-windows-powershell-script-in-a-system-center-operations-manager-management-pack.aspx
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

VMM Connection to Configuration Manager and Operations Manager

Hi,
i was wondering how do i connect Virtual Machine Manager to Configuration Manager. do i need to have operations manager installed and up and running? or can i connect it to SCCM directly as it is being the main component.
From my understanding of the VMM is that it is used for provisioning and controlling of Hyper visors (cytrix, Vmeare, etc.).
why do i need to go through the Operation Manger? why can i not connect directly to SCCM?
whats the Advantages of using operations manager instead of using CM?
Thanks.

VMM has no direct link to Configuration Manager at all.
VMM has a direct link to Operations Manager, which can be integrated and monitor the entire fabric (compute, networking and storage).
The synergy here is that every thing in VMM, will get exposed for monitoring in SCOM.
Configuration Manager has a different approach - as VMM is responsible for the
datacenter - while Configuration Manager manages the clients and eventually applications within the servers/clients.
-kn
Kristian (Virtualization and some coffee: http://kristiannese.blogspot.com )

Cisco Jabber Client for Windows 9.7 Can't Connect to Other IPSec VPN Clients Over Clustered ASAs

Environment:
2 x ASA 5540s (at two different data centers) configured as a VPN Load Balancing Cluster
Both ASAs are at version 8.4(5)6
IPSec VPN Client version: 5.0.07.440 (64-bit)
Jabber for Windows v9.7.0 build 18474
Issue:
If I am an IPSec VPN user…
I can use Jabber to another IPSec VPN user that is connected to the same ASA appliance.
I can’t use Jabber to another IPSec VPN user that is connected to the different ASA appliance that I am connected to.
In the hub-and-spoke design, where the VPN ASA is a hub, and the VPN client is a spoke; if you have two hubs clustered together, how does one spoke communicate with another spoke on the other hub in the cluster? (How to allow hairpinning to the other ASA)

Portu,
Thanks for your quick reply.
Unfortunately, I do not have access to the ASA logs nor would I be permitted to turn on the debug settings asked for above. I might be able to get the logs but it will take awhile and I suspect they wouldn't be helpful as this ASA supports thousands of clients, therefore, separating out my connection attempts from other clients would be difficult.
I can, though, do whatever you want on the Linux router. Looking over the firewall logs at the time of this problem, I don't see anything that looks suspicious such as dropped packets destined for the Windows client.
As I said in my original post, I'm not a networking expert - by any means - but I am willing to try anything to resolve this. (But I might need a bit of handholding if I need to set up a wireshark andor tcpdump.)
Thanks again.

Cisco Jabber Client for Windows 9.7 Can't Connect IPSec VPN Clients over two ASAs

Environment:
2 x ASA 5540s (at two different data centers) configured as a VPN Load Balancing Cluster
Both ASAs are at version 8.4(5)6
IPSec VPN Client version: 5.0.07.440 (64-bit)
Jabber for Windows v9.7.0 build 18474
Issue:
If I am an IPSec VPN user…
I can use Jabber to another IPSec VPN user that is connected to the same ASA appliance.
I can’t use Jabber to another IPSec VPN user that is connected to the different ASA appliance that I am connected to.
In the hub-and-spoke design, where the VPN ASA is a hub, and the VPN client is a spoke; if you have two hubs clustered together, how does one spoke communicate with another spoke on the other hub in the cluster? (How to allow hairpinning to the other ASA)

Portu,
Thanks for your quick reply.
Unfortunately, I do not have access to the ASA logs nor would I be permitted to turn on the debug settings asked for above. I might be able to get the logs but it will take awhile and I suspect they wouldn't be helpful as this ASA supports thousands of clients, therefore, separating out my connection attempts from other clients would be difficult.
I can, though, do whatever you want on the Linux router. Looking over the firewall logs at the time of this problem, I don't see anything that looks suspicious such as dropped packets destined for the Windows client.
As I said in my original post, I'm not a networking expert - by any means - but I am willing to try anything to resolve this. (But I might need a bit of handholding if I need to set up a wireshark andor tcpdump.)
Thanks again.

Operations Manager 2012 R2 Unix/Linux agents installation

Hi!
I want to monitor some Linux (RH6) servers with Operations manager 2012 R2. I successfully imported necessary management packs… and then I’m lost. I cannot discover Linux clients
from console. And I can’t find good guidance how to deploy and manage Linux clients. Can anyone direct me to any step-by-step guidance?
And, do I need certificates on SCOM and on Linux clients?
Thanks,
UV

To discover and monitor linux client, you can refer to below link
http://technet.microsoft.com/en-us/library/hh230722.aspx
For Importing Management of linux (RH6), you will need to download management of linux from below link
http://www.microsoft.com/en-us/download/details.aspx?id=29696
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer".

RVL200 Ipsec VPN Problems

Hello Experts,
I managed to establish an Ipsec VPN connetion with 2 RVL200s between 2 Locations. So far so good.
It is possible to access network a form network b with WinXP PCs, but it is not possible to reach network a with Win7 PCs.
Whereelse it is possible to reach network b from network a from either type of windows pc.
And when you ping from the RVL200 (on both sides) to the other net you always get no replys to your ping.
Settings on both RVL200s are equal, except for that one is going over ADSL (network a) and the other is behind a cable modem (network b).
I have de-activated Firewalls, no change. Routing Tables look fine for me. IPv6 is de-activated in Win7 PCs. I have added static routes, no change.
Does anyone know where else I could look for a solution?
Many Thanks in advance.
J. Radix

Josef,
You state that you can reach from both sides of the routers and ping xp machines but not windows 7 machines? The router won't be restricting traffic based on operating systems on the lan, so I would look at possible firewalls on the windows 7 machines, anti-virus, nortons, anything that does packet inspection.

OMServer.msi returns error 1603 when trying to upgrade first management server from Operations Manager 2012 SP1 to Operations Manager 2012 R2

Hi All, looking for some assistance with the following issue.
We are attempting to upgrade our Operations Manager 2012 SP1 environment to Operations Manager 2012 R2.
We have completed all the pre-upgrade tasks detailed here
http://technet.microsoft.com/en-us/library/dn249704.aspx
We are then following the guidance detailed here regarding upgrading distributed management groups
http://technet.microsoft.com/en-us/library/dn249721.aspx. The upgrade fails on the first management server with the following screen being displayed.
OMServer.log file is as follows.
=== Verbose logging started: 22/01/2014 10:21:27 Build type: SHIP UNICODE 5.00.9200.00 Calling process: C:\Users\scomaction\AppData\Local\SCOM\Setup\SetupChainerUI.exe ===
MSI (c) (78:34) [10:21:27:040]: Resetting cached policy values
MSI (c) (78:34) [10:21:27:040]: Machine policy value 'Debug' is 0
MSI (c) (78:34) [10:21:27:040]: ******* RunEngine:
******* Product: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
******* Action:
******* CommandLine: **********
MSI (c) (78:34) [10:21:27:040]: Client-side and UI is none or basic: Running entire install on the server.
MSI (c) (78:34) [10:21:27:040]: Grabbed execution mutex.
MSI (c) (78:34) [10:21:27:071]: Cloaking enabled.
MSI (c) (78:34) [10:21:27:071]: Attempting to enable all disabled privileges before calling Install on Server
MSI (c) (78:34) [10:21:27:071]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D4:30) [10:21:27:082]: Running installation inside multi-package transaction F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
MSI (s) (D4:30) [10:21:27:082]: Grabbed execution mutex.
MSI (s) (D4:A0) [10:21:27:086]: Resetting cached policy values
MSI (s) (D4:A0) [10:21:27:086]: Machine policy value 'Debug' is 0
MSI (s) (D4:A0) [10:21:27:086]: ******* RunEngine:
******* Product: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
******* Action:
******* CommandLine: **********
MSI (s) (D4:A0) [10:21:27:175]: Machine policy value 'DisableUserInstalls' is 0
MSI (s) (D4:A0) [10:21:27:181]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (D4:A0) [10:21:27:190]: SRSetRestorePoint skipped for this transaction.
MSI (s) (D4:A0) [10:21:27:192]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
MSI (s) (D4:A0) [10:21:27:200]: File will have security applied from OpCode.
MSI (s) (D4:A0) [10:21:27:234]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi' against software restriction policy
MSI (s) (D4:A0) [10:21:27:234]: SOFTWARE RESTRICTION POLICY: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi has a digital signature
MSI (s) (D4:A0) [10:21:27:354]: SOFTWARE RESTRICTION POLICY: F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi is permitted to run at the 'unrestricted' authorization level.
MSI (s) (D4:A0) [10:21:27:354]: MSCOREE not loaded loading copy from system32
MSI (s) (D4:A0) [10:21:27:360]: End dialog not enabled
MSI (s) (D4:A0) [10:21:27:360]: Original package ==> F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
MSI (s) (D4:A0) [10:21:27:360]: Package we're running from ==> C:\Windows\Installer\4b8344.msi
MSI (s) (D4:A0) [10:21:27:371]: APPCOMPAT: Compatibility mode property overrides found.
MSI (s) (D4:A0) [10:21:27:372]: APPCOMPAT: looking for appcompat database entry with ProductCode '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'.
MSI (s) (D4:A0) [10:21:27:372]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (D4:A0) [10:21:27:378]: Machine policy value 'TransformsSecure' is 1
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisablePatch' is 0
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'AllowLockdownPatch' is 0
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisableLUAPatching' is 0
MSI (s) (D4:A0) [10:21:27:379]: Machine policy value 'DisableFlyWeightPatching' is 0
MSI (s) (D4:A0) [10:21:27:380]: APPCOMPAT: looking for appcompat database entry with ProductCode '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'.
MSI (s) (D4:A0) [10:21:27:380]: APPCOMPAT: no matching ProductCode found in database.
MSI (s) (D4:A0) [10:21:27:380]: Transforms are not secure.
MSI (s) (D4:A0) [10:21:27:380]: Note: 1: 2205 2: 3: Control
MSI (s) (D4:A0) [10:21:27:380]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'C:\Users\scomaction\AppData\Local\SCOM\Logs\OMServer.log'.
MSI (s) (D4:A0) [10:21:27:380]: Command Line: OM_INSTALLDIR=F:\Program Files\Microsoft System Center 2012 R2\Operations Manager SEND_CEIP_REPORTS=0 MU_SETTING=0 ROOT_MANAGEMENT_SERVER_PORT=5723 SC_DB_SERVER=SCOM-XXX-AG SCDATABASENAME=OperationsManager DW_DB_SERVER=SCOM-XXX-AG DWDATABASENAME=OperationsManagerDW REBOOT=ReallySuppress CURRENTDIRECTORY=C:\Users\scomaction\AppData\Local\SCOM\Setup CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=4472
MSI (s) (D4:A0) [10:21:27:380]: PROPERTY CHANGE: Adding PackageCode property. Its value is '{58EFE971-58C1-4DBD-A400-A7607A745475}'.
MSI (s) (D4:A0) [10:21:27:380]: Product Code passed to Engine.Initialize: ''
MSI (s) (D4:A0) [10:21:27:380]: Product Code from property table before transforms: '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'
MSI (s) (D4:A0) [10:21:27:380]: Product Code from property table after transforms: '{C92727BE-BD12-4140-96A6-276BA4F60AC1}'
MSI (s) (D4:A0) [10:21:27:380]: Product not registered: beginning first-time install
MSI (s) (D4:A0) [10:21:27:380]: Product {C92727BE-BD12-4140-96A6-276BA4F60AC1} is not managed.
MSI (s) (D4:A0) [10:21:27:380]: MSI_LUA: Credential prompt not required, user is an admin
MSI (s) (D4:A0) [10:21:27:381]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
MSI (s) (D4:A0) [10:21:27:381]: Entering CMsiConfigurationManager::SetLastUsedSource.
MSI (s) (D4:A0) [10:21:27:381]: User policy value 'SearchOrder' is 'nmu'
MSI (s) (D4:A0) [10:21:27:381]: Adding new sources is allowed.
MSI (s) (D4:A0) [10:21:27:381]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:381]: Package name extracted from package path: 'OMServer.msi'
MSI (s) (D4:A0) [10:21:27:381]: Package to be registered: 'OMServer.msi'
MSI (s) (D4:A0) [10:21:27:383]: Note: 1: 2262 2: AdminProperties 3: -2147287038
MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'DisableMsi' is 1
MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'AlwaysInstallElevated' is 0
MSI (s) (D4:A0) [10:21:27:383]: User policy value 'AlwaysInstallElevated' is 0
MSI (s) (D4:A0) [10:21:27:383]: Product installation will be elevated because user is admin and product is being installed per-machine.
MSI (s) (D4:A0) [10:21:27:383]: Running product '{C92727BE-BD12-4140-96A6-276BA4F60AC1}' with elevated privileges: Product is assigned.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding OM_INSTALLDIR property. Its value is 'F:\Program Files\Microsoft System Center 2012 R2\Operations Manager'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding ROOT_MANAGEMENT_SERVER_PORT property. Its value is '5723'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Modifying SC_DB_SERVER property. Its current value is 'OperationsManager'. Its new value: 'SCOM-XXX-AG'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding DW_DB_SERVER property. Its value is 'SCOM-XXX-AG'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding DWDATABASENAME property. Its value is 'OperationsManagerDW'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding REBOOT property. Its value is 'ReallySuppress'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'C:\Users\scomaction\AppData\Local\SCOM\Setup'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '4472'.
MSI (s) (D4:A0) [10:21:27:383]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
MSI (s) (D4:A0) [10:21:27:383]: RESTART MANAGER: Disabled by MSIRESTARTMANAGERCONTROL property; Windows Installer will use the built-in FilesInUse functionality.
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:383]: TRANSFORMS property is now:
MSI (s) (D4:A0) [10:21:27:383]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '300'.
MSI (s) (D4:A0) [10:21:27:395]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming
MSI (s) (D4:A0) [10:21:27:396]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Favorites
MSI (s) (D4:A0) [10:21:27:398]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Network Shortcuts
MSI (s) (D4:A0) [10:21:27:399]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Documents
MSI (s) (D4:A0) [10:21:27:401]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
MSI (s) (D4:A0) [10:21:27:402]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Recent
MSI (s) (D4:A0) [10:21:27:404]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\SendTo
MSI (s) (D4:A0) [10:21:27:405]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Templates
MSI (s) (D4:A0) [10:21:27:405]: SHELL32::SHGetFolderPath returned: C:\ProgramData
MSI (s) (D4:A0) [10:21:27:406]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Local
MSI (s) (D4:A0) [10:21:27:408]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Pictures
MSI (s) (D4:A0) [10:21:27:411]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (D4:A0) [10:21:27:413]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (D4:A0) [10:21:27:414]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
MSI (s) (D4:A0) [10:21:27:415]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
MSI (s) (D4:A0) [10:21:27:417]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
MSI (s) (D4:A0) [10:21:27:420]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
MSI (s) (D4:A0) [10:21:27:421]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
MSI (s) (D4:A0) [10:21:27:423]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
MSI (s) (D4:A0) [10:21:27:424]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Start Menu
MSI (s) (D4:A0) [10:21:27:426]: SHELL32::SHGetFolderPath returned: C:\Users\scomaction\Desktop
MSI (s) (D4:A0) [10:21:27:427]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
MSI (s) (D4:A0) [10:21:27:428]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
MSI (s) (D4:A0) [10:21:27:428]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
MSI (s) (D4:A0) [10:21:27:433]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding USERNAME property. Its value is 'Windows User'.
MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Windows\Installer\4b8344.msi'.
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi'.
MSI (s) (D4:A0) [10:21:27:434]: Machine policy value 'MsiDisableEmbeddedUI' is 0
MSI (s) (D4:A0) [10:21:27:434]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
MSI (s) (D4:A0) [10:21:27:434]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
MSI (s) (D4:A0) [10:21:27:434]: Note: 1: 2205 2: 3: PatchPackage
MSI (s) (D4:A0) [10:21:27:434]: Machine policy value 'DisableRollback' is 0
MSI (s) (D4:A0) [10:21:27:434]: User policy value 'DisableRollback' is 0
MSI (s) (D4:A0) [10:21:27:434]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
=== Logging started: 22/01/2014 10:21:27 ===
MSI (s) (D4:A0) [10:21:27:435]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
MSI (s) (D4:A0) [10:21:27:436]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
MSI (s) (D4:A0) [10:21:27:438]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
MSI (s) (D4:A0) [10:21:27:438]: Doing action: INSTALL
Action start 10:21:27: INSTALL.
MSI (s) (D4:A0) [10:21:27:444]: Running ExecuteSequence
MSI (s) (D4:A0) [10:21:27:444]: Doing action: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76
MSI (s) (D4:A0) [10:21:27:447]: PROPERTY CHANGE: Adding SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76 property. Its value is 'C:\Windows\SysWOW64\'.
Action start 10:21:27: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76.
MSI (s) (D4:A0) [10:21:27:448]: Doing action: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76
Action ended 10:21:27: SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76. Return value 1.
MSI (s) (D4:A0) [10:21:27:450]: PROPERTY CHANGE: Adding System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76 property. Its value is 'C:\Windows\system32\'.
Action start 10:21:27: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76.
MSI (s) (D4:A0) [10:21:27:450]: Doing action: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6
Action ended 10:21:27: System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76. Return value 1.
MSI (s) (D4:A0) [10:21:27:452]: PROPERTY CHANGE: Adding WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6.
MSI (s) (D4:A0) [10:21:27:453]: Doing action: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522
Action ended 10:21:27: WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6. Return value 1.
MSI (s) (D4:A0) [10:21:27:455]: PROPERTY CHANGE: Adding System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 property. Its value is 'C:\Windows\system32\'.
Action start 10:21:27: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522.
MSI (s) (D4:A0) [10:21:27:456]: Doing action: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C
Action ended 10:21:27: System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522. Return value 1.
MSI (s) (D4:A0) [10:21:27:458]: PROPERTY CHANGE: Adding WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.
MSI (s) (D4:A0) [10:21:27:458]: Doing action: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C
Action ended 10:21:27: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C. Return value 1.
MSI (s) (D4:A0) [10:21:27:461]: PROPERTY CHANGE: Adding SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C property. Its value is 'C:\Windows\SysWOW64\'.
Action start 10:21:27: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.
MSI (s) (D4:A0) [10:21:27:461]: Doing action: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7
Action ended 10:21:27: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C. Return value 1.
MSI (s) (D4:A0) [10:21:27:463]: PROPERTY CHANGE: Adding WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7.
MSI (s) (D4:A0) [10:21:27:463]: Doing action: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7
Action ended 10:21:27: WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7. Return value 1.
MSI (s) (D4:A0) [10:21:27:466]: PROPERTY CHANGE: Adding System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 property. Its value is 'C:\Windows\system32\'.
Action start 10:21:27: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7.
MSI (s) (D4:A0) [10:21:27:467]: Doing action: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8
Action ended 10:21:27: System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7. Return value 1.
MSI (s) (D4:A0) [10:21:27:468]: PROPERTY CHANGE: Adding WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8.
MSI (s) (D4:A0) [10:21:27:469]: Doing action: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9
Action ended 10:21:27: WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8. Return value 1.
MSI (s) (D4:A0) [10:21:27:471]: PROPERTY CHANGE: Adding WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9.
MSI (s) (D4:A0) [10:21:27:472]: Doing action: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE
Action ended 10:21:27: WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9. Return value 1.
MSI (s) (D4:A0) [10:21:27:474]: PROPERTY CHANGE: Adding WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE property. Its value is 'C:\Windows\'.
Action start 10:21:27: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE.
MSI (s) (D4:A0) [10:21:27:475]: Doing action: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0
Action ended 10:21:27: WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE. Return value 1.
MSI (s) (D4:A0) [10:21:27:477]: PROPERTY CHANGE: Adding ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0 property. Its value is 'C:\ProgramData\Microsoft\Windows\Start Menu\Programs\'.
Action start 10:21:27: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0.
MSI (s) (D4:A0) [10:21:27:477]: Doing action: FindRelatedProducts
Action ended 10:21:27: ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0. Return value 1.
Action start 10:21:27: FindRelatedProducts.
MSI (s) (D4:A0) [10:21:27:481]: PROPERTY CHANGE: Adding CORECOMPONENTPRESENT_AGENT property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'.
MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _StopCoreServices.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _KillOMProcesses.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 (condition is false)
MSI (s) (D4:A0) [10:21:27:483]: Skipping action: _SearchOpsMgrShellPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 (condition is false)
MSI (s) (D4:A0) [10:21:27:483]: Doing action: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0
Action ended 10:21:27: FindRelatedProducts. Return value 1.
MSI (s) (D4:08) [10:21:27:501]: Invoking remote custom action. DLL: C:\Windows\Installer\MSI847C.tmp, Entrypoint: SetMonadFilePath
MSI (s) (D4:B0) [10:21:27:502]: Generating random cookie.
MSI (s) (D4:B0) [10:21:27:505]: Created Custom Action Server with PID 4964 (0x1364).
MSI (s) (D4:34) [10:21:27:527]: Running as a service.
MSI (s) (D4:34) [10:21:27:529]: Hello, I'm your 64bit Impersonated custom action server.
Action start 10:21:27: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0.
MSI (s) (D4!DC) [10:21:27:638]: PROPERTY CHANGE: Modifying MONAD_SHELL_PATH property. Its current value is 'Error: Value Never Set. Check the CACore:SetMonadFilePath CA'. Its new value: 'C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe'.
GetRegistyStringValue: Registy key value found.. C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
MSI (s) (D4:A0) [10:21:27:640]: Doing action: _Set_CORECOMPONENTPRESENT
Action ended 10:21:27: _SetMonadFilePath.CFE2C791_D05A_4240_90ED_DEB20161DFB0. Return value 1.
MSI (s) (D4:A0) [10:21:27:643]: PROPERTY CHANGE: Adding CORECOMPONENTPRESENT property. Its value is '{8B21425D-02F3-4B80-88CE-8F79B320D330}'.
Action start 10:21:27: _Set_CORECOMPONENTPRESENT.
MSI (s) (D4:A0) [10:21:27:644]: Skipping action: _AbortDowngradeProductAttempt (condition is false)
MSI (s) (D4:A0) [10:21:27:644]: Doing action: _AbortIncompatibleComponents
Action ended 10:21:27: _Set_CORECOMPONENTPRESENT. Return value 1.
Action start 10:21:27: _AbortIncompatibleComponents.
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5044 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 1580 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5512 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 4268 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5024 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 6064 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 3396 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 2704 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5568 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 5940 could not be cancelled. Error: 1168
MSI (s) (D4:30) [10:21:27:652]: I/O on thread 1968 could not be cancelled. Error: 1168
MSI (s) (D4:A0) [10:21:27:652]: Product: System Center Operations Manager 2012 Server -- The Operations Manager management server cannot be installed on a computer on which the Operations Manager agent, Operations Manager gateway, System Center Essentials, or System Center Service Manager is already installed. These must be uninstalled to proceed.
The Operations Manager management server cannot be installed on a computer on which the Operations Manager agent, Operations Manager gateway, System Center Essentials, or System Center Service Manager is already installed. These must be uninstalled to proceed.
Action ended 10:21:27: _AbortIncompatibleComponents. Return value 3.
Action ended 10:21:27: INSTALL. Return value 3.
Property(S): DiskPrompt = Please Insert Disk 1
Property(S): UpgradeCode = {17058653-A628-4C03-8F80-5E2B179ECD55}
Property(S): SCDATABASENAME = OperationsManager
Property(S): SC_DB_SERVER = SCOM-XXX-AG
Property(S): SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
Property(S): CORECOMPONENTPRESENT = {8B21425D-02F3-4B80-88CE-8F79B320D330}
Property(S): OM_INSTALLDIR = F:\Program Files\Microsoft System Center 2012 R2\Operations Manager
Property(S): ProgramFiles64Folder = C:\Program Files\
Property(S): Privileged = 1
Property(S): ARPSYSTEMCOMPONENT = 1
Property(S): DONOTSKIPDELETESERVICES = 0
Property(S): DONOTSKIPINSTALLSERVICES = 0
Property(S): OM_COMMON_PRODUCT_REGISTRY_PATH = SOFTWARE\Microsoft\System Center Operations Manager
Property(S): OM_COMMON_PRODUCT_RELEASE_REGISTRY_KEY = 12
Property(S): OM_COMMON_PRODUCT_DEFAULT_INSTALL_DIR = System Center Operations Manager
Property(S): NetFxVersion = v2.0.50727
Property(S): IS_OM_SERVER = 1
Property(S): InstallAPMAgent = 1
Property(S): INSTALLLEVEL = 100
Property(S): ALLUSERS = 1
Property(S): ARPNOREPAIR = 0
Property(S): ARPURLINFOABOUT = http://www.microsoft.com/mom
Property(S): ARPURLUPDATEINFO = http://www.microsoft.com/mom
Property(S): ARPHELPLINK = http://support.microsoft.com
Property(S): MSIRESTARTMANAGERCONTROL = Disable
Property(S): SQL_PORT = 1433
Property(S): DbSizeGood = 1
Property(S): DbFileOptionsGood = 1
Property(S): DbFilesSpaceGood = 1
Property(S): DbNameGood = 1
Property(S): SqlServicesStarted = 1
Property(S): _SetSDKServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
Property(S): _SetConfigServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650 = **********
Property(S): DialogWizardTitle = System Center 2012 R2 Operations Manager Setup
Property(S): MinimumOSMsg = This product must be installed on Windows Server 2008 R2 or higher.
Property(S): MOMSDKPortDesc = Operations Manager SDK.
Property(S): MOMConnectorPortDesc = Operations Manager Connector Framework.
Property(S): MOMAEMPortDesc = Operations Manager Application Error Monitoring.
Property(S): MOMSQMPortDesc = Operations Manager Customer Experience Improvement Program.
Property(S): MOMHSPortDesc = System Center Management Health Service
Property(S): SCOMV3SP1ProgramName = System Center 2012 R2 Operations Manager
Property(S): FWRulePingRequestName = Operations Manager Ping Request (Echo Request - ICMPv4 OUT)
Property(S): FWRulePingRequestDesc = Operations Manager network monitoring ping request
Property(S): FWRulePingResponseName = Operations Manager Ping Response (Echo Response - ICMPv4 IN)
Property(S): FWRulePingResponseDesc = Operations Manager network monitoring ping response
Property(S): FWRuleSnmpRequestName = Operations Manager SNMP Request
Property(S): FWRuleSnmpRequestDesc = Operations Manager network monitoring SNMP request
Property(S): FWRuleSnmpResponseName = Operations Manager SNMP Response
Property(S): FWRuleSnmpResponseDesc = Operations Manager network monitoring SNMP response
Property(S): FWRuleSnmpTrapListenerName = Operations Manager SNMP Trap Listener
Property(S): FWRuleSnmpTrapListenerDesc = Operations Manager network monitoring SNMP trap listener
Property(S): Manufacturer = Microsoft Corporation
Property(S): ProductCode = {C92727BE-BD12-4140-96A6-276BA4F60AC1}
Property(S): ProductLanguage = 1033
Property(S): ProductName = System Center Operations Manager 2012 Server
Property(S): ProductVersion = 7.1.10226.0
Property(S): SecureCustomProperties = ACTIONSPASSWORD;CORECOMPONENTPRESENT_AGENT;CORECOMPONENTPRESENT_GW;CORECOMPONENTPRESENT_RC;CORECOMPONENTPRESENT_SCE;CORECOMPONENTPRESENT_SMB2;CORECOMPONENTPRESENT_SMRTM;IS_AVICODE_AGENT_INSTALLED;IS_MOMASPAGENT_INSTALLED;MOM_DB_SERVER;MOMDATABASENAME_OLD;OM_NEWER_PRODUCT_FOUND;SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650;SQL_PORT
Property(S): MsiHiddenProperties = _SetConfigServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650;_SetSDKServiceAccount.540EA3C0_A5E9_41EA_A585_822C09EA2650;ACTIONSPASSWORD;SDK_PASSWORD.540EA3C0_A5E9_41EA_A585_822C09EA2650
Property(S): WixPdbPath = d:\btvsts\20867\private\product\setup\wix\msi\server\om\obj\amd64\OMServer.wixpdb
Property(S): CORECOMPONENTPRESENT_AGENT = {8B21425D-02F3-4B80-88CE-8F79B320D330}
Property(S): ProgramMenuFolder.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): MONAD_SHELL_PATH = C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe
Property(S): EnableEV.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = 1
Property(S): AddInstallPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = add
Property(S): RemoveInstallPath.CFE2C791_D05A_4240_90ED_DEB20161DFB0 = remove
Property(S): WindowsFolder.3A3B255D_E19B_4D2E_8687_D6EF0314AFBE = C:\Windows\
Property(S): VersionNT = 602
Property(S): DW_DB_SERVER = SCOM-XXX-AG
Property(S): DWDATABASENAME = OperationsManagerDW
Property(S): OMDATABASENAME = OperationsManger
Property(S): MaximumDataAgeMinutes = 10080
Property(S): MaximumQueueSizeKB = 102400
Property(S): MOMSDKPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 5724
Property(S): MOMConnectorPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51905
Property(S): MOMAEMPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51906
Property(S): MOMSQMPort.1451A536_2C9B_42F2_A37A_C9C6460E7EEA = 51907
Property(S): SDK_SERVICE_TYPE = 4
Property(S): ROOT_MANAGEMENT_SERVER_PORT = 5723
Property(S): SERVER_MANAGEMENT_GROUP_TYPE.C6F00077_9737_419B_A8B6_B309BA6F8FC8 = 1
Property(S): MaximumForwardedVirtualQueuePercentage = 8
Property(S): QueueSendDataSinglePriority = 0
Property(S): ADMIN_ROLE_GROUP.C6F00077_9737_419B_A8B6_B309BA6F8FC8 = Administrators
Property(S): USE_MANUALLY_SPECIFIED_SETTINGS = 1
Property(S): WindowsFolder.80B659D9_F758_4E7D_B4FA_E53FC737DCC9 = C:\Windows\
Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
Property(S): CAN_REGISTER_FOR_MU = 0
Property(S): MU_SETTING = 0
Property(S): IS_ROOT_HEALTH_SERVICE = 0
Property(S): IS_MOM_SERVER = 0
Property(S): IS_MOM_GATEWAY = 0
Property(S): WindowsFolder.399B61E4_41A2_4BE4_889A_A0D0761C88A8 = C:\Windows\
Property(S): WindowsFolder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 = C:\Windows\
Property(S): System64Folder_amd64_VC.1C11561A_11CB_36A7_8A47_D7A042055FA7 = C:\Windows\system32\
Property(S): DirectoryTable100_amd64.1C11561A_11CB_36A7_8A47_D7A042055FA7 = DirectoryTable
Property(S): WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = C:\Windows\
Property(S): SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = C:\Windows\SysWOW64\
Property(S): DirectoryTable100_x86.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C = DirectoryTable
Property(S): SEND_CEIP_REPORTS = 0
Property(S): System64Folder.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 = C:\Windows\system32\
Property(S): ACS_AGENT_ACCOUNT.A7850EAF_DD6F_4ED6_9581_E958CBD8A522 =
Property(S): WindowsFolder.62894CB9_4320_40DB_B4E4_C0347FAB97B6 = C:\Windows\
Property(S): SC_COMMON_REGISTRY_PATH = SOFTWARE\Microsoft\System Center\2010\Common
Property(S): DISCOVERY_DATA_AUTHORIZATION_ENABLED = 0
Property(S): IcmpProtocol.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 1
Property(S): IcmpRequestType.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 8:*
Property(S): IcmpResponseType.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 0:*
Property(S): SnmpProtocol.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 17
Property(S): SnmpPort.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 161
Property(S): SnmpTrapPort.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 162
Property(S): DirectionIn.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 0
Property(S): DirectionOut.ADADB3CF_4DA7_4040_90AE_3E4E0E0A6FBF = 1
Property(S): SystemFolder.A591E3B4_D228_431D_BF89_99D52C8FFB76 = C:\Windows\SysWOW64\
Property(S): System64Folder.A591E3B4_D228_431D_BF89_99D52C8FFB76 = C:\Windows\system32\
Property(S): ADVISOR_UPLOADFREQUENCY_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1
Property(S): ADVISOR_UPLOADDAY_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
Property(S): ADVISOR_UPLOADTIMEHOUR_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
Property(S): ADVISOR_UPLOADTIMEMIN_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #-1
Property(S): ADVISOR_MAXCACHESIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1024
Property(S): ADVISOR_MAXMAILBOXSIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1024
Property(S): ADVISOR_ARCHIVEPERIOD_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #5
Property(S): ADVISOR_LOGLEVEL_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #3
Property(S): ADVISOR_NEEDMPINITIALIZE_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #1
Property(S): ADVISOR_LYNC_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #0
Property(S): ADVISOR_SHAREPOINT_PROP.192DDC2A_1CC5_4B2A_9D76_D8D0FC70175A = #0
Property(S): MsiLogFileLocation = C:\Users\scomaction\AppData\Local\SCOM\Logs\OMServer.log
Property(S): PackageCode = {58EFE971-58C1-4DBD-A400-A7607A745475}
Property(S): ProductState = -1
Property(S): PackagecodeChanging = 1
Property(S): REBOOT = ReallySuppress
Property(S): CURRENTDIRECTORY = C:\Users\scomaction\AppData\Local\SCOM\Setup
Property(S): CLIENTUILEVEL = 3
Property(S): MSICLIENTUSESEXTERNALUI = 1
Property(S): CLIENTPROCESSID = 4472
Property(S): MsiSystemRebootPending = 1
Property(S): VersionDatabase = 300
Property(S): VersionMsi = 5.00
Property(S): VersionNT64 = 602
Property(S): WindowsBuild = 9200
Property(S): ServicePackLevel = 0
Property(S): ServicePackLevelMinor = 0
Property(S): MsiNTProductType = 3
Property(S): WindowsFolder = C:\Windows\
Property(S): WindowsVolume = C:\
Property(S): System64Folder = C:\Windows\system32\
Property(S): SystemFolder = C:\Windows\SysWOW64\
Property(S): RemoteAdminTS = 1
Property(S): TempFolder = C:\Users\SCOMAC~1\AppData\Local\Temp\
Property(S): ProgramFilesFolder = C:\Program Files (x86)\
Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
Property(S): AppDataFolder = C:\Users\scomaction\AppData\Roaming\
Property(S): FavoritesFolder = C:\Users\scomaction\Favorites\
Property(S): NetHoodFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
Property(S): PersonalFolder = C:\Users\scomaction\Documents\
Property(S): PrintHoodFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
Property(S): RecentFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\Recent\
Property(S): SendToFolder = C:\Users\scomaction\AppData\Roaming\Microsoft\Windows\SendTo\
Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
Property(S): CommonAppDataFolder = C:\ProgramData\
Property(S): LocalAppDataFolder = C:\Users\scomaction\AppData\Local\
Property(S): MyPicturesFolder = C:\Users\scomaction\Pictures\
Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
Property(S): DesktopFolder = C:\Users\Public\Desktop\
Property(S): FontsFolder = C:\Windows\Fonts\
Property(S): GPTSupport = 1
Property(S): OLEAdvtSupport = 1
Property(S): ShellAdvtSupport = 1
Property(S): MsiAMD64 = 6
Property(S): Msix64 = 6
Property(S): Intel = 6
Property(S): PhysicalMemory = 8192
Property(S): VirtualMemory = 7854
Property(S): AdminUser = 1
Property(S): MsiTrueAdminUser = 1
Property(S): LogonUser = scomaction
Property(S): UserSID = S-1-5-21-607126847-70518424-489426498-210484
Property(S): UserLanguageID = 2057
Property(S): ComputerName = SCOMMS1-VM
Property(S): SystemLanguageID = 2057
Property(S): ScreenX = 1024
Property(S): ScreenY = 768
Property(S): CaptionHeight = 23
Property(S): BorderTop = 1
Property(S): BorderSide = 1
Property(S): TextHeight = 16
Property(S): TextInternalLeading = 3
Property(S): ColorBits = 32
Property(S): TTCSupport = 1
Property(S): Time = 10:21:27
Property(S): Date = 22/01/2014
Property(S): MsiNetAssemblySupport = 4.0.30319.17929
Property(S): MsiWin32AssemblySupport = 6.2.9200.16384
Property(S): RedirectedDllSupport = 2
Property(S): MsiRunningElevated = 1
Property(S): USERNAME = Windows User
Property(S): DATABASE = C:\Windows\Installer\4b8344.msi
Property(S): OriginalDatabase = F:\InstallFiles\SCOMR2\Setup\AMD64\Server\OMServer.msi
Property(S): UILevel = 2
Property(S): ACTION = INSTALL
MSI (s) (D4:A0) [10:21:27:697]: Note: 1: 1708
MSI (s) (D4:A0) [10:21:27:698]: Product: System Center Operations Manager 2012 Server -- Installation operation failed.
MSI (s) (D4:A0) [10:21:27:698]: Windows Installer installed the product. Product Name: System Center Operations Manager 2012 Server. Product Version: 7.1.10226.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
MSI (s) (D4:A0) [10:21:27:744]: Deferring clean up of packages/files, if any exist
MSI (s) (D4:A0) [10:21:27:744]: MainEngineThread is returning 1603
MSI (s) (D4:30) [10:21:27:744]: No System Restore sequence number for this installation.
=== Logging stopped: 22/01/2014 10:21:27 ===
MSI (s) (D4:30) [10:21:27:746]: User policy value 'DisableRollback' is 0
MSI (s) (D4:30) [10:21:27:746]: Machine policy value 'DisableRollback' is 0
MSI (s) (D4:30) [10:21:27:746]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (D4:30) [10:21:27:746]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D4:30) [10:21:27:746]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (D4:30) [10:21:27:746]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (D4:30) [10:21:27:747]: Destroying RemoteAPI object.
MSI (s) (D4:B0) [10:21:27:747]: Custom Action Manager thread ending.
MSI (c) (78:34) [10:21:27:748]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (78:34) [10:21:27:749]: MainEngineThread is returning 1603
=== Verbose logging stopped: 22/01/2014 10:21:27 ===
Any assistance anyone can provide will be greatly appreciated.

Verify from permission of user that you use it in upgrade, make sure that scom machine and user that you use it in upgrade in sysadmin group in database of operationsManager and OperationsManagerDW
Also Verify from Prerequisites of Upgrade SCOM 2012 sp1 as below link
http://technet.microsoft.com/en-us/library/jj656654.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"

Can Operations Manager discover and monitor IPSEC VPN state

Similar Messages

Maybe you are looking for