Can oracle 10g database store 1,000,000,000,000 and bigger number

I am using oracle 10g db as my database.
Can the oracle databse holds and calculate the results large no. such as 1,000,000,000,000 .
what is the maximum numbers oracle can process.
Also does oracle supports numeric fields upto 9 decimal places?
Message was edited by:
437022

You can see a similar thread today.
A simple  query
Cheers
Sarma.

Similar Messages

  • Can Oracle 10g database runs on these operating systems?

    Does Oracle 10g supports working on below OS:
    1) zOS
    2) OS400
    What is Data recovery protocols.
    This is required as i was doing my research on staic data & dynamic data to be loaded. Is this can be done using Data recovery protcols.
    Message was edited by:
    437022

    No. If you are indeed maintaining an IBM iSeries (or AS/400) or zSeries you probably know that IBM ships it with its own DB2 database and that this database is fully integrated in the OS.

  • Oracle 10g database in AIX 6.1.

    Hello ALL!
    Would anyone know what are the parameters or settings that need to be configured in AIX 6.1. before you can install Oracle 10g database?
    Should you know any helpful and related links, please share.
    Thanks so much!!!

    You will need 10.2.0.3 or higher - see these MOS Docs for details
    Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
    Minimum Software Versions and Patches Required to Support Oracle Products on IBM Power Systems [ID 282036.1]     
    HTH
    Srini

  • Replication of data from LDAP to Oracle 10g Database

    Hi All,
    in our application we are using Oracle Identity manager, and Oracle 10g database.
    we are storing the user,profile and privilages in LDAP and due to some reason we have to create user table in the 10g database.
    this user table values and LDAP user table values must be same.
    here the source is LDAP and destination is Oracle.
    so is there any way we can synchoronize or replicate the data from LDAP to 10g database?
    since oracle identity manager is integrated with LDAP,
    i feeel this must be possible.
    but really dont know how?
    kindly suggest me.
    and if any examples available please let me know, i will be very greatful to you.
    Thanks in advance

    Check out thread How synchronize OID user to a table?
    The title of the thread is: How synchronize OID user to a table?

  • Oracle 10g - Database does not respond to the application users

    Hi all,
    I am using ORACLE 10g database with 75 users connections 50 local and 20 remote users using ADSL and dial up modem. Operating system on server is
    Windows 2003.
    All of a sudden users making the entry get disconnected getting the error as
    ORA-12516: TNS:listener could not find available handler with matching protocol stack
    Other case users when using the appliaction get their PC hanged and connection
    to oracle fails again. they cannot login to the application that time, the error is
    ORA-04031: unable to allocate %s bytes of shared memory ("%s","%s","%s","%s")
    Twice a day the users trying to login cannot access the database server.
    Front end application is in VB using exe file. When the users cannot logon
    to the database. I manually stop the ORACLE services(including DB console) and
    then stop the listener.
    This practice is going on since last two months.
    Server Scenario
    After Installing Oracle Standard Edition 10g.
    System tablespace utilization is 98.5% which is 465 MB out of total 470 MB.
    There is only one Rollback Segment named as SYSTEM.
    when we install 9i 4 rollback segments as RO1, RO2, RO3, RO4 are created
    by default.
    Do I need to add the datafile to SYSTEM table space as its current usage is 99.15% and its auto extend is ticked on using auto extent as 10 MB. I tried adding another datafile during weekend downtime. when I resumed on saturday morning I found it did not add any datafile which I had put on thursday eveninig as system02.dbf.
    Do I need to add a new datafile to the SYSTEM tablespace ?
    Do I need to create new rollback segments apart from SYSTEM rollback segment ?
    My current schema size 15360Mb with its usage as 9.32% (1432.25 Mb).
    Please reply !!!

    Hi Paul
    My Server configuration is
    Compaq ML 370
    3.4 Ghz Processor
    3.5 GB RAM
    SQL> show sga
    Total System Global Area 171966464 bytes
    Fixed Size 787988 bytes
    Variable Size 145488364 bytes
    Database Buffers 25165824 bytes
    Redo Buffers 524288 bytes
    SQL> select * from v$sgastat;
    POOL NAME BYTES
    fixed_sga 787988
    buffer_cache 25165824
    log_buffer 524288
    shared pool subheap 55600
    shared pool KQR L SO 218160
    shared pool KQR M PO 1329244
    shared pool KQR M SO 605364
    shared pool KQR S PO 164156
    shared pool KQR S SO 6144
    shared pool KTI-UNDO 1235304
    shared pool sql area 5368208
    shared pool KGLS heap 1597560
    shared pool joxs heap 6004
    shared pool row cache 3707272
    shared pool parameters 17520
    shared pool repository 19396
    shared pool ASH buffers 4194304
    shared pool free memory 16586072
    shared pool PL/SQL DIANA 679456
    shared pool KSPD key heap 4220
    shared pool PL/SQL MPCODE 1167992
    shared pool library cache 11368964
    shared pool miscellaneous 25942980
    shared pool pl/sql source 88
    shared pool PLS non-lib hp 29816
    shared pool XDB Schema Cac 3594144
    shared pool alert threshol 3460
    shared pool joxlod exec hp 355820
    shared pool table definiti 5880
    shared pool temporary tabl 4932
    shared pool trigger defini 12848
    shared pool trigger inform 1892
    shared pool type object de 20256
    shared pool private strands 1198080
    shared pool event statistics per sess 4384640
    shared pool fixed allocation callback 304
    large pool free memory 8388608
    java pool joxs heap 233856
    java pool free memory 44743296
    java pool joxlod exec hp 5354496
    40 rows selected.
    SQL> select segment_name, owner, status
    2 from dba_rollback_segs;
    SEGMENT_NAME OWNER STATUS
    SYSTEM SYS ONLINE
    _SYSSMU1$                      PUBLIC ONLINE
    _SYSSMU2$                      PUBLIC ONLINE
    _SYSSMU3$                      PUBLIC ONLINE
    _SYSSMU4$                      PUBLIC ONLINE
    _SYSSMU5$                      PUBLIC ONLINE
    _SYSSMU6$                      PUBLIC ONLINE
    _SYSSMU7$                      PUBLIC ONLINE
    _SYSSMU8$                      PUBLIC ONLINE
    _SYSSMU9$                      PUBLIC ONLINE
    _SYSSMU10$                     PUBLIC ONLINE
    SEGMENT_NAME OWNER STATUS
    _SYSSMU11$                     PUBLIC ONLINE
    _SYSSMU12$                     PUBLIC ONLINE
    _SYSSMU13$                     PUBLIC ONLINE
    _SYSSMU14$                     PUBLIC ONLINE
    _SYSSMU15$                     PUBLIC OFFLINE
    _SYSSMU16$                     PUBLIC OFFLINE
    _SYSSMU17$                     PUBLIC OFFLINE
    _SYSSMU18$                     PUBLIC OFFLINE
    _SYSSMU19$                     PUBLIC OFFLINE
    _SYSSMU20$                     PUBLIC OFFLINE
    _SYSSMU21$                     PUBLIC OFFLINE
    SEGMENT_NAME OWNER STATUS
    _SYSSMU22$                     PUBLIC OFFLINE
    _SYSSMU23$                     PUBLIC OFFLINE
    _SYSSMU24$                     PUBLIC OFFLINE
    _SYSSMU25$                     PUBLIC OFFLINE
    _SYSSMU26$                     PUBLIC OFFLINE
    27 rows selected.
    Currently AUTOEXTEND is ticked as on for SYSTEM tablespace and its size is showing as 99.16% (466.06 mb) used which is very much nearing to its full capacity of 470 mb.
    Currently 75 users - 50 Local users and 20 Remote Users are connected to the server. Is there any limit that Server should have limited connections.
    Server has Windows 2003 Standard Edition. Has Windows 2003 anything to do
    with the no. of users getting connected ?

  • Can we install oracle 10g database on Windows Vista Home Edition?

    Can we install oracle 10g database on Windows Vista Home Edition?

    You didn't specify which Oracle10 Edition.
    In the case of SE/SE one/EE, with a paid license Supported has a mean impact on production environments with paid licenses, since you wouldn't run on an unsupported platform facing the risk of being left without technical support from Oracle in case of an emerging issue.
    For the XE Edition, this is not a certified combination, since the only certified editions are the Business, Enterprise, and the Ultimate editions, but you can try it, you don't have nothing to loose, supported, certified vs. unsupported in this case makes no difference since this XE is not supported either way (no patchsets, no bug fixes, no technical support from metalink), just an AS IS free software.
    On the license agreement terms displayed when you download the XE software it states:
    "No Technical Support
    Our technical support organization will not provide technical support, phone support, or updates to you for the programs licensed under this agreement."
    and
    "THE PROGRAMS ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. WE FURTHER DISCLAIM ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE."
    In case someone would be able to win a trial against oracle due to damage from the use of this software, the amount paid at maximum is 1,000.00 USD, not enough to even pay the lawyer's lunches.
    For the XE users the primary source of 'kind of support' is the oracle forums, either the installation forum, the general database or the specialized XE forum.
    Of course if this is for your own personal use for learning and testing and there are no third parties you could damage by doing this and if you don't have a paid license for this installation you may try it, but don't expect the Enterprise Manager to behave as defined by the manual, most of it won't work since the Home Edition doesn't have the privileges required for EM to work.
    If this is your personal computer and when you bought it the computer provider installed from factory Home Edition, and if you want something to work there, you can try to install a Virtual Machine and install Oracle 10g on a supported guest OS.
    ~ Madrid

  • Can cold backup be taken for ASM managed oracle 10g databases

    Can cold backup be taken for ASM managed oracle 10g databases
    Pls help

    do we still need to take cold backupYou need to take backup. Hot or cold depends on how your DB is running (archivelog or not).
    Will we have file permisions for copyng Use RMAN and don't worry about that.

  • How to store photo images and thumbimpressions in oracle 10g database

    Hi all
    I have an web application running in Oracle 10g rel 1 database server in RHEL3. It has application server with forms and j2ee component as middle tier. I need to store centrally photo images and thumb impressions and use it in our application without any overhead on retrieval and performance of web application. what will be optimized method of storage of photo and thumb impressions. Awaiting your valuable suggestions.
    Regards
    Vijay Kumar

    Hi Vijay,
    How to store photo images and thumbimpressions in oracle 10g database I have working code here for storing photos in Oracle tables that you may find useful:
    http://www.dba-oracle.com/t_storing_insert_photo_pictures_tables.htm
    Hope this helps . . .
    Donald K. Burleson
    Oracle Press author
    Author of "Oracle Tuning: The Definitive Reference"
    http://www.rampant-books.com/book_2005_1_awr_proactive_tuning.htm

  • Where can i download oracle 10g database express edition

    Hi
    can any one tell me from where i can download oracle 10g database express edition
    I cannot able to find it in oracle.com
    Regards,
    suresh

    You can try following CNET link to get Windows media: http://download.cnet.com/Oracle-Database-10g-Express-Edition/3000-10254_4-75220235.html.

  • Where i can fing chancges log of Oracle 10g database

    Hi.
    I need changes history of Oracle 10g database. Where i can find this?
    Thanks.

    I think you are asking "how do I set up and look at audits"
    Best to ask in a Database forum. This forum is for discussing problems with Oracle Software Download (and Oracle has several hundred different software)

  • Where can I download the Oracle 10g Database Installer

    where can I download the Oracle 10g Database Installer. I'm unable to find a link over the Oracle site. Please help me out on this one.

    981705 wrote:
    where can I download the Oracle 10g Database Installer. I'm unable to find a link over the Oracle site. Please help me out on this one.As mentioned above, you need to log a SR since 10g is not longer available for download -- https://forums.oracle.com/forums/search.jspa?threadID=&q=10g+AND+Download&objID=f36&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Problem in installation of Oracle 10g database on RHEL 6

    I am facing the problem when I am trying to install Oracle 10g database on Red Hat 6. When ./runinstaller is run, the message seems to be if I remember correctly is like ‘……………bad ELF interpreter’. But, the same source seems to be installing correctly in Red Hat 5.
    Please, help in solving the doubt.
    Regards

    Hi;
    1. Please make search before posting your issue here. Similar issue mention here million time
    2. Please use certified platform such as *nix 5.x .
    3. For can check certification from metalink or from below note:
    Oracle Database on Unix AIX,HP-UX,Linux,Mac OS X,Solaris,Tru64 Unix Operating Systems Installation and Configuration Requirements Quick Reference (8.0.5 to 11.2) [ID 169706.1]
    PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
    Regard
    Helios

  • Installation of Oracle 10g Database on Windows Vista Home Basic

    Hi All,
    I'm confused about the possibility of installing Oracle 10g Database Server in Windows Home Basic Operating System with Service Pack 1. Please help me out with a confirmation.
    Thanks in advance
    Prasanth

    Hi Prasanth
    Yes that should be possible but is it a production database or just a test database.
    you can always control that in metalink if it is supported, I don't believe it is.
    Read that documentation to perform the installation.
    http://download.oracle.com/docs/cd/B19306_01/install.102/b14316/toc.htm

  • Win32 Oracle 10g Database Server Installation problems

    Hello,
    I have recently installed the Oracle 10g Database Server for Win32. The installation seemed to be successful. I used the Enterprise option and all the suggested defaults. Ihave the following services installed and started after the installation:
    o OracleDBConsoleORCL [started]
    o OracleOraDb10g_home1iSQL*Plus [started]
    o OracleOraDb10g_home1SNMPPeerEncapsulator [manual]
    o OracleOraDb10g_home1SNMPPeerMasterAgent [manual]
    o OracleOraDb10g_home1TNSListener [started]
    o OracleServiceORCL [started]
    I have created the following files:
    # LISTENER.ORA Network Configuration File: d:\oracle10gServer\network\admin\listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = d:\oracle10gServer)
    (PROGRAM = extproc)
    (SID_DESC =
    (GLOBAL_DBNAME = ORCL)
    (ORACLE_HOME = d:\oracle10gServer)
    (SID_NAME = ORCL)
    # TNSNAMES.ORA Network Configuration File: d:\oracle10gServer\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    ORCL =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = ORCL)
    INST1_HTTP =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = asparuh)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = SHARED)
    (SERVICE_NAME = MODOSE)
    (PRESENTATION = http://HRService)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    I go to the DOS console and type:
    c:> sqlplus scott/tiger@ORCL
    and I get:
    ERROR: ORA-28000: the account is locked
    I did this right after I restarted my computer.
    When I use the Enterprise Manager at:
    http://localhost:5500/em/
    I get for ORCL:
    Status: Status Pending
    Status Pending Since: Unavailable
    Seems that I can never get the database started properly?! When I press the Startup/Shutdown button I get:
    Current Status: open
    This is the correct current database status, although it doesnot match the current status in the sitemap page
    What does this mean? Do you think this may contain the clue to the answer to this problem?
    When I restart the Database I get the same status: unavailable.
    I need your help to resolve this problem. The alternative is to revert back to Oracle 9i DB Server. Thank you in advance.
    gkk

    I can help you with the SCOTT account being locked. Try:
    sqlplus /nolog
    connect / as sysdba
    alter user scott identified by tiger account unlock;

  • Errors in manual creation of oracle 10g database

    I created oracle 10g database manually and i am getting post installation errors.. could you please help out?
    I executed @?/sqlplus/admin/pupbld.sql but it still shows
    Error accessing PRODUCT_USER_PROFILE
    Warning: Product user profile information not loaded!
    You may need to run PUPBLD.SQL as SYSTEM
    i tried to see
    SQL> desc product_user_profile;
    ERROR:
    ORA-04043: object "SYSTEM"."SQLPLUS_PRODUCT_PROFILE" does not exist
    not there?? any other scripts to be run ? please guide me.
    2. I can not able login sys@sid as sysdba
    SQL> select * from v$pwfile_users;
    no rows selected
    i changed
    remote_login_passwordfile string EXCLUSIVE
    re-started db but no help...
    SQL> grant sysdba to sys;
    grant sysdba to sys
    ERROR at line 1:
    ORA-01990: error opening password file
    I re-created
    $ORACLE_HOME/bin/orapwd file=$ORACLE_HOME/dbs/orapwmydb.ora password=xxxx entries=5 force=y
    but no help..
    Could one please help out... ! great thanks in advance..

    thanks for prompt reply .. but still one issue remain..
    oracle DEVS $ sqlplus sys@sid sysdba
    SQL*Plus: Release 10.1.0.4.0 - Production on Thu Jan 7 10:51:44 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Enter password:
    ERROR:
    ORA-01031: insufficient privileges
    but i can able to login as sqlplus sys as sysdba
    SQL> select * From v$pwfile_users;
    no rows selected
    i tired to do
    SQL> grant sysdba to sys;
    grant sysdba to sys
    ERROR at line 1:
    ORA-01990: error opening password file
    '/u02/app/oracle/product/10.1.0/dbs/orapw'
    ORA-27037: unable to obtain file status
    Linux Error: 2: No such file or directory
    Additional information: 3
    there is already one password file with orapwsid.ora.. how this should be solved ? please help. thanks

Maybe you are looking for