Can oracle 11g installed on solaris 8 ?
Can oracle 11g installed on solaris 8 ?
Other what is the minimum solaris supported to install oracle 11g.
Thank you in advance..
[email protected] wrote:
Can oracle 11g installed on solaris 8 ?
Other what is the minimum solaris supported to install oracle 11g.
Thank you in advance..In general, each product has an installation manual - found through http://docs.oracle.com and possibly http://tahiti.oracle.com and the install manual clearly identifies the (minimum) support OS and Release information.
Similar Messages
-
Install Oracle 11g RAC on Solaris 10
Hello,
I'm new joined DBA in my organization.
There is a requirement from a client to install Oracle 11g RAC on Solaris 10 env.
Can anybody please guide me with some doc or pdf for the steps.
Till now, i've install Oracle 11g DB on Solaris, but i'm pretty new to RAC env.
Note:
I've to do installation via commands, No GUI.
Thanks for your help.
Regards,
GagsHi,
Q) Can Oracle 11g Release 2 RAC be installed on Solaris (x86)??yes, you can Install it on Solaris X86
Q) Can the links of Oracle RAC installation over Unix and Linux be taken as base?? As i haven't seen any doc for installing 11g RAC on Solaris, where as it was provided in Oracle 10g.yes, you need to consider Oracle RAC installation over Unix and Linux be taken as base as base document.
http://download.oracle.com/docs/cd/E11882_01/install.112/e17214/toc.htm
In addition Refer:
http://www.oraclemasters.in/?p=963
thanks,
X A H E E R -
Can Oracle 11g RAC support 2 separate databases?
1. Can Oracle 11g RAC support 2 separate databases given that it asks for SCAN ip for cluster with a single Listener port number?
2. Will the Oracle 11.2 database connections work successfully if I setup a mandatory DNS server within the Oracle RAC servers?
I'm leading a team for a 11g project and appreciate responses.
Thanks
Satish.No Real Application Cluster technology has ever supported more than one database.Quite untrue.
I know that both you and Tom Kyte take the stand that a cluster should have only 1 instance per node.
That doesn't mean that it is not possible to have more than one database in a cluster -- i.e more than one instance in a node.
That doesn't mean that it must always be so. Installing a separate cluster and additional EE + RAC licences for a separate database can be quite expensive. Of course, your reply is "consolidate". That is another debate that has been going on for years.
A discussion on multiple databases on RAC is also at
http://www.freelists.org/post/oracle-l/multiple-databases-in-a-single-RAC-cluster
Hemant K Chitale
Edited by: Hemant K Chitale on Jan 12, 2010 11:15 AM -
DO I NEED TO HAVE ORACLE 11G INSTALLED?
Hi,
I have never used Oracle before. I have a very basic doubt. I have a Peoplesoft Id and password. I wish to know if I need to have Oracle 11g installed on my laptop to be able to use Peoplesoft Code to create applications using an online database? Kindly let me know at the earliest and will be of great help.
I greatly appreciate it.
Thanks. :)You need to have app designer installed if you want to work with peopletools, which will allow you to connect 3-tier to running Oracle/Peoplesoft instance. If you want to connect 2-tier, then you'll need the 11g client installed.
-
Oracle 11g Installation on SOlaris 5.10
Hi ,
First i am going to install oracle 11g on solaris 5.10 . Could some one tell me what are the requirements required if not please send me the better link which i can follow for my installation ...Follow the Oracle Installation Documentations.
"Oracle® Database Quick Installation Guide
11g Release 1 (11.1) for Solaris Operating System"
http://download.oracle.com/docs/cd/B28359_01/install.111/b32313/toc.htm
http://download.oracle.com/docs/cd/B28359_01/install.111/b32313.pdf
Oracle® Database Installation Guide
11g Release 1 (11.1) for Solaris Operating System
http://download.oracle.com/docs/cd/B28359_01/install.111/b32068/toc.htm
http://download.oracle.com/docs/cd/B28359_01/install.111/b32068.pdf
Regards,
Sabdar Syed. -
Oracle 11g install hangs on windows 7
Hi,
I have downloaded Oracle 11g r2 64 bit install onto my windows system.
When i install, the install hangs after selecting the following
a) Create and configure a database
b) Desktop Class
After these, when I click on Next, the UI hangs.
Help will be appreciated.Using paramFile: C:\Users\jeevan\Documents\My DAP Downloads\database\install\oraparam.ini
Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
INFO: [INS-07001] Value for property 'INSTALL_TYPE' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_StarterDatabaseType' not found in the bean store.
INFO: [INS-07001] Value for property 'oracle_install_db_CustomComponents' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_HOME' not found in the bean store.
INFO: [INS-07001] Value for property 'ORACLE_BASE' not found in the bean store.
INFO: [INS-07001] Value for property 'FROM_LOCATION' not found in the bean store.
INFO: [INS-07001] Value for property 'TOPLEVEL_COMPONENT' not found in the bean store.
INFO: [INS-07001] Value for property 'TopLevelComponentVersion' not found in the bean store.
WARNING: Failed to load bean oracle.install.ivw.db.bean.DBInstallSettings. Reason: [INS-07001] Value for property 'DBInstallSettings' not found in the bean store.
INFO: Closing bean stores from which the beans can be loaded
INFO: Registering the flow views
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.PrereqGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.PrereqGUI added to View Type Registry with the key as [PrereqUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SummaryGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SummaryGUI added to View Type Registry with the key as [SummaryUI]
INFO: Adding View[type: oracle.install.commons.base.interview.common.view.SetupGUI viewId: null uiType: null]
INFO: oracle.install.commons.base.interview.common.view.SetupGUI added to View Type Registry with the key as [SetupUI]
INFO: Adding View[type: oracle.install.ivw.common.view.InventoryUI viewId: null uiType: null]
INFO: oracle.install.ivw.common.view.InventoryUI added to View Type Registry with the key as [InventoryUI]
INFO: Adding View[type: oracle.install.ivw.common.view.ProductLanguageGUI viewId: ProductLanguageUI uiType: null]
INFO: oracle.install.ivw.common.view.ProductLanguageGUI added to View Type Registry with the key as [ProductLanguageUI]
INFO: Adding View[type: oracle.install.ivw.common.view.OCMDetailsGUI viewId: OCMDetailsUI uiType: null]
INFO: oracle.install.ivw.common.view.OCMDetailsGUI added to View Type Registry with the key as [OCMDetailsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ConfigurationTypeUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ConfigurationTypeUI added to View Type Registry with the key as [ConfigurationTypeUI]
INFO: Adding View[type: oracle.install.ivw.db.view.DBIdentifierUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.DBIdentifierUI added to View Type Registry with the key as [DBIdentifierUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ConfigurationOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ConfigurationOptionsUI added to View Type Registry with the key as [ConfigurationOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ManagementOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.ManagementOptionsUI added to View Type Registry with the key as [ManagementOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.StorageOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.StorageOptionsUI added to View Type Registry with the key as [StorageOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.RecoveryBackupUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.RecoveryBackupUI added to View Type Registry with the key as [RecoveryBackupUI]
INFO: Adding View[type: oracle.install.ivw.db.view.ASMDiskGroupSelectionGUI viewId: ASMDiskGroupSelectionUI uiType: null]
INFO: oracle.install.ivw.db.view.ASMDiskGroupSelectionGUI added to View Type Registry with the key as [ASMDiskGroupSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.SchemaPasswordUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.SchemaPasswordUI added to View Type Registry with the key as [SchemaPasswordUI]
INFO: Adding View[type: oracle.install.ivw.db.view.QuickInstallUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.QuickInstallUI added to View Type Registry with the key as [QuickInstallUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallOptionsUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.InstallOptionsUI added to View Type Registry with the key as [InstallOptionsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.SystemClassUI viewId: SystemClassUI uiType: null]
INFO: oracle.install.ivw.db.view.SystemClassUI added to View Type Registry with the key as [SystemClassUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallLocationUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.InstallLocationUI added to View Type Registry with the key as [InstallLocationUI]
INFO: Adding View[type: oracle.install.ivw.db.view.DBEditionGUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.DBEditionGUI added to View Type Registry with the key as [DBEditionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.NodeSelectionUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.NodeSelectionUI added to View Type Registry with the key as [NodeSelectionUI]
INFO: Adding View[type: oracle.install.ivw.db.view.FinishUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.FinishUI added to View Type Registry with the key as [FinishUI]
INFO: Adding View[type: oracle.install.ivw.db.view.PrivilegedOSGroupsGUI viewId: null uiType: null]
INFO: oracle.install.ivw.db.view.PrivilegedOSGroupsGUI added to View Type Registry with the key as [PrivilegedOSGroupsUI]
INFO: Adding View[type: oracle.install.ivw.db.view.InstallTypeGUI viewId: installTypeUI uiType: null]
INFO: oracle.install.ivw.db.view.InstallTypeGUI added to View Type Registry with the key as [installTypeUI]
INFO: Initial values of Setup Properties :
PROPERTY VALUE
CLUSTER_NODES {}
COLLECTOR_IGNORE_CONFIGURATION false
COLLECTOR_IGNORE_FAILURES false
COLLECTOR_RESPONSE_FILE
DECLINE_SECURITY_UPDATES false
FROM_LOCATION C:\Users\jeevan\Documents\My DAP Downloads\database
\install\../stage/products.xml
INSTALL_TYPE EE
MYORACLESUPPORT_PASSWORD Protected value, not to be logged
MYORACLESUPPORT_USERNAME
ORACLE_BASE
ORACLE_HOME
ORACLE_HOSTNAME COSMOS
PROXY_HOST
PROXY_PORT
PROXY_PWD Protected value, not to be logged
PROXY_USER
SECURITY_UPDATES_VIA_MYORACLESUPPORT true
SELECTED_LANGUAGES {"en"}
b_rdbmsInstall true
oracle.install.db.isCCRAuthenticationUsed false
oracle_install_LaunchNetCA false
oracle_install_NoMigration false
oracle_install_OCR_PartitionLocation
oracle_install_RACInstall false
oracle_install_RDBMSInstalling true
oracle_install_client_OraMTSPortNumber 49157
oracle_install_db_ASMSNMPUserPassword Protected value, not to be logged
oracle_install_db_AutoMemoryOption false
oracle_install_db_CharSetOption 3
oracle_install_db_CharacterSet
oracle_install_db_ConfigTabSelected 0
oracle_install_db_ConfigurationType &General Purpose / Transaction Processing
oracle_install_db_CustomInstall false
oracle_install_db_DiskGroupName
oracle_install_db_DiskGroupNameForASM
oracle_install_db_EMCentralAgentSelected
oracle_install_db_EMEmailAddress
oracle_install_db_EMSMTPServer
oracle_install_db_EnableAutoBackup false
oracle_install_db_InstallEdition EE
oracle_install_db_InstallOption INSTALL_DB_AND_CONFIG
oracle_install_db_InstallOptionSelected 1
oracle_install_db_InstallType EE
oracle_install_db_LaunchDBCA false
oracle_install_db_LaunchODMA false
oracle_install_db_LoadExampleSchemas false
oracle_install_db_MountPointLocation
oracle_install_db_QuickInstallOption false
oracle_install_db_ReceiveEmailNotification false
oracle_install_db_RecoveryBackUpLocation
oracle_install_db_RecoveryBackUpPassword Protected value, not to be logged
oracle_install_db_RecoveryBackUpUsername
oracle_install_db_SID
oracle_install_db_SecureConfigDisabled false
oracle_install_db_SetOracleBase false
oracle_install_db_StarterDatabaseType GENERAL_PURPOSE
oracle_install_db_StorageType 0
oracle_install_db_SuperAdminPasswords Protected value, not to be logged
oracle_install_db_SuperAdminSamePasswdForAll Protected value, not to be logged
oracle_install_db_SystemClass DESKTOP_CLASS
oracle_install_db_Type 1
oracle_install_db_UseDBControl true
oracle_install_db_UseFileSystemForRecovery false
oracle_install_db_UseSamePassword false
INFO: Launching Oracle Database 11g Release 2 Installer
INFO: Started executing the flow in INTERACTIVE mode
INFO: Waiting for completion of background operations
INFO: Finishing all forked tasks at state prepInstall
INFO: Waiting for completion all forked tasks at state prepInstall
INFO: All forked task are completed at state prepInstall
INFO: Completed background operations
INFO: Executing action at state prepInstall
INFO: Completed executing action at state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <prepInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <prepInstall>
INFO: Completed validating view at state <prepInstall>
INFO: Validating state <prepInstall>
WARNING: Validation disabled for the state prepInstall
INFO: Completed validating state <prepInstall>
INFO: Verifying route success
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state decideOCMInstall
INFO: Completed executing action at state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <decideOCMInstall>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <decideOCMInstall>
INFO: Completed validating view at state <decideOCMInstall>
INFO: Validating state <decideOCMInstall>
WARNING: Validation disabled for the state decideOCMInstall
INFO: Completed validating state <decideOCMInstall>
INFO: Verifying route requireOCM
INFO: Get view named [OCMDetailsUI]
INFO: View for [OCMDetailsUI] is oracle.install.ivw.common.view.OCMDetailsGUI@6da05bdb
INFO: Initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed initializing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed displaying view <OCMDetailsUI> at state <getOCMDetails>
INFO: Loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed loading view <OCMDetailsUI> at state <getOCMDetails>
INFO: Localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Completed localizing view <OCMDetailsUI> at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getOCMDetails
INFO: Completed executing action at state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getOCMDetails>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Validating view at state <getOCMDetails>
INFO: Completed validating view at state <getOCMDetails>
INFO: Validating state <getOCMDetails>
SEVERE: You have not provided an email address.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Is this the problem????
Do you wish to remain uninformed of critical security issues in your configuration?
INFO: Completed validating state <getOCMDetails>
INFO: Verifying route success
INFO: Get view named [InstallOptionsUI]
INFO: InstallOptionsUI Entering Constructor
INFO: InstallOptionsUI Exiting Constructor
INFO: View for [InstallOptionsUI] is oracle.install.ivw.db.view.InstallOptionsUI@5ea07440
INFO: Initializing view <InstallOptionsUI> at state <installOptions>
INFO: Completed initializing view <InstallOptionsUI> at state <installOptions>
INFO: Displaying view <InstallOptionsUI> at state <installOptions>
INFO: Completed displaying view <InstallOptionsUI> at state <installOptions>
INFO: Loading view <InstallOptionsUI> at state <installOptions>
INFO: Completed loading view <InstallOptionsUI> at state <installOptions>
INFO: Localizing view <InstallOptionsUI> at state <installOptions>
INFO: Completed localizing view <InstallOptionsUI> at state <installOptions>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state installOptions
INFO: Completed executing action at state <installOptions>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <installOptions>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: InstallOptions UI Entering & Exiting processInput
INFO: Validating view at state <installOptions>
INFO: Completed validating view at state <installOptions>
INFO: Validating state <installOptions>
INFO: Completed validating state <installOptions>
INFO: InstallOptionsAction Actions.transition called
INFO: selectedInstallOption is :INSTALL_DB_AND_CONFIG
INFO: launchNETCA = true
INFO: Verifying route system_class
INFO: Get view named [SystemClassUI]
INFO: SystemClassUI Entering Constructor
INFO: SystemClassUI Exiting Constructor
INFO: View for [SystemClassUI] is oracle.install.ivw.db.view.SystemClassUI@164ca42b
INFO: Initializing view <SystemClassUI> at state <getSystemClass>
INFO: Completed initializing view <SystemClassUI> at state <getSystemClass>
INFO: Displaying view <SystemClassUI> at state <getSystemClass>
INFO: Completed displaying view <SystemClassUI> at state <getSystemClass>
INFO: Loading view <SystemClassUI> at state <getSystemClass>
INFO: Completed loading view <SystemClassUI> at state <getSystemClass>
INFO: Localizing view <SystemClassUI> at state <getSystemClass>
INFO: Completed localizing view <SystemClassUI> at state <getSystemClass>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Executing action at state getSystemClass
INFO: Completed executing action at state <getSystemClass>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: Moved to state <getSystemClass>
INFO: Waiting for completion of background operations
INFO: Completed background operations
INFO: SystemClassUI Entering & Exiting processInput
INFO: Validating view at state <getSystemClass>
INFO: Completed validating view at state <getSystemClass>
INFO: Validating state <getSystemClass>
INFO: Completed validating state <getSystemClass>
INFO: selectedSystemClass is :DESKTOP_CLASS
INFO: Verifying route desktop_class_yes
INFO: Get view named [QuickInstallUI] -
Is a license required for Oracle 11g installed on private developer box?
Hello,
I wish to install Oracle 11g on my personal computer to test some software that hits a database. Will I be able to install/run 11g on my machine for this use, or will it (eventually) prompt me for a license key? If I need a license, is there a free developer license available? I can't seem to find any info on this.
How is the licensing structured around the 11g "XE" BETA (express edition)? Is there a licensing difference between XE and non-XE?
And finally, is there a good summary of what features are missing from the XE edition? I tried installing 10g XE, and for example, the "DEFAULT TABLESPACE xxx" SQL command was not recognized. I need this 'feature' (as well as others). I'm assuming I'm going to need to install the full 11g release, but I hope there is no license required.
Any advice would be appreciated. Thank You.The general license agreement is here - http://www.oracle.com/technetwork/licenses/standard-license-152015.html
In short, yes - you can download the software and use it for testing/prototyping.
11gXE Beta license terms are here - http://www.oracle.com/technetwork/licenses/ea-license-152003.html
HTH
Srini -
Oracle 11g Install hangs when "creating clon database"
hi, i'm new with all this stuff, i'm trying to install oracle 11g on a windows 2003 standard edition and the installation hangs in this point:
http://img233.imageshack.us/img233/1458/installni7.jpg
it's almost an hour and it's stuck in 45% when trying to create clon database in "Creating and starting oracle instance".
I checked the log file but it says nothing weird, just that everything went well and a "restore" was made.
what can i do?
thanks!!!If someone still needs an answer to this:
I had a similar problem with 10g. If you use certain special characters in the password for the database during its creation, some script will hang forever at 45% of the database creation. Just use a plain password without special characters. At the end of the database creation you can change all passwords. At that stage you can use special characters without any problem.
I don't know if this is the same in 11g, but it sounds very similar.
JD -
Memory used by oracle 11g processes on solaris 10
I am running oracle 11.1.0.7 on solaris 10. The database uses some 280M virtual memory size for each oracle backup or user process. See the SZ column in output of ps -efl below.
I just wonder how come oracle that much of memory for each process. Is that something we can control through some system/database parameters or is that the way oracle 11g on solaris works?
oracle@taut $ ps -efl|grep cttrain6
F S UID PID PPID C PRI NI ADDR SZ WCHAN STIME TTY TIME CMD
0 S oracle 2490 1 0 40 20 ? 284111 ? 12:23:37 ? 0:01 ora_q001_cttrain6
0 S oracle 9698 1 0 40 20 ? 283837 ? 13:37:51 ? 0:00 ora_w000_cttrain6
0 S oracle 2147 1 0 40 20 ? 285464 ? 12:18:11 ? 0:15 ora_lgwr_cttrain6
0 S oracle 2135 1 0 40 20 ? 283878 ? 12:18:09 ? 0:17 ora_dia0_cttrain6
0 S oracle 9979 11472 0 50 20 ? 211 ? 13:40:24 pts/2 0:00 grep cttrain6
0 S oracle 2157 1 0 40 20 ? 283942 ? 12:18:13 ? 0:47 ora_mmnl_cttrain6
0 S oracle 2129 1 0 40 20 ? 283830 ? 12:18:09 ? 0:06 ora_diag_cttrain6
0 S root 2159 1 0 40 20 ? 263214 ? 12:18:13 ? 3:52 ora_dism_cttrain6
0 S oracle 9565 1 0 40 20 ? 283861 ? 13:35:18 ? 0:00 oraclecttrain6 (LOCAL=NO)
0 S oracle 2482 1 0 40 20 ? 283837 ? 12:22:55 ? 0:01 ora_q000_cttrain6
0 S oracle 2884 1 0 40 20 ? 283830 ? 12:27:46 ? 0:01 ora_smco_cttrain6
0 S oracle 2153 1 0 40 20 ? 283846 ? 12:18:12 ? 0:01 ora_reco_cttrain6
0 S oracle 2464 1 0 40 20 ? 284150 ? 12:22:42 ? 0:01 ora_fbda_cttrain6
0 S oracle 2123 1 0 40 20 ? 284270 ? 12:18:08 ? 0:14 ora_pmon_cttrain6
0 S oracle 2454 1 0 40 20 ? 285190 ? 12:22:34 ? 0:01 ora_arc1_cttrain6
0 S oracle 2145 1 0 40 20 ? 284792 ? 12:18:11 ? 0:06 ora_dbw3_cttrain6
0 S oracle 2141 1 0 40 20 ? 284792 ? 12:18:10 ? 0:08 ora_dbw1_cttrain6
0 S oracle 2149 1 0 40 20 ? 284112 ? 12:18:11 ? 0:25 ora_ckpt_cttrain6
0 S oracle 9513 1 0 40 20 ? 283885 ? 13:34:18 ? 0:02 oraclecttrain6 (LOCAL=NO)
0 S oracle 2125 1 0 0 RT ? 283830 ? 12:18:08 ? 0:07 ora_vktm_cttrain6
0 S oracle 2143 1 0 40 20 ? 284792 ? 12:18:10 ? 0:04 ora_dbw2_cttrain6
0 S oracle 2459 1 0 40 20 ? 285198 ? 12:22:35 ? 0:01 ora_arc3_cttrain6
0 S oracle 2451 1 0 40 20 ? 285190 ? 12:22:33 ? 0:01 ora_arc0_cttrain6
0 S oracle 2131 1 0 40 20 ? 283838 ? 12:18:09 ? 0:02 ora_dbrm_cttrain6
0 S oracle 2139 1 0 40 20 ? 284872 ? 12:18:10 ? 0:03 ora_dbw0_cttrain6
0 S oracle 2466 1 0 40 20 ? 283830 ? 12:22:44 ? 0:01 ora_qmnc_cttrain6
0 S oracle 2151 1 0 40 20 ? 283974 ? 12:18:12 ? 0:05 ora_smon_cttrain6
0 S oracle 2457 1 0 40 20 ? 285198 ? 12:22:34 ? 0:01 ora_arc2_cttrain6
0 S oracle 2133 1 0 40 20 ? 283830 ? 12:18:09 ? 0:02 ora_psp0_cttrain6
0 S oracle 2155 1 0 40 20 ? 284656 ? 12:18:12 ? 0:11 ora_mmon_cttrain6
0 S oracle 2137 1 0 40 20 ? 283830 ? 12:18:09 ? 0:02 ora_mman_cttrain6user567271 wrote:
I am running oracle 11.1.0.7 on solaris 10. The database uses some 280M virtual memory size for each oracle backup or user process. See the SZ column in output of ps -efl below.
I just wonder how come oracle that much of memory for each process. Is that something we can control through some system/database parameters or is that the way oracle 11g on solaris works?As you have already said, it is "virtual" memory. This is not real, "physical" memory. Solaris has a virtual memory sub-system layer in it, as do almost all other modern operating systems. Google "operating system virtual memory" to find out more on what virtual memory is and how it works.
In terms of your question, virtual memory means that not all of a process's memory space needs to be in physical memory for it to run and execute. The process virtual memory space is broken up into equal sized pages, and only those pages currently being referenced (used) are mapped and read into physical memory pages. Thus the virtual size of a process is irrelevant to how much physical memory is being used. Look at the RSS column (ps -ely) for the physical memory used by each process - Resident Set Size.
Furthermore, an Oracle shadow server process (oracle) uses a large segment of shared memory for the SGA. This shared memory only exists once in physical memory, and is shared amongst all the shadow server processes. But it is mapped into the address space of each process, and so appears and is counted in the virtual and physical memory of each process.
So each reported virtual size (SZ) of each oracle process is also counting the mapped shared memory pages in each process, and so counting the same pages multiple times across all the oracle processes. You need to subtract the size of the SGA shared memory from the virtual size of each oracle process to determine the private, local memory per shadow process.
If you want a further breakdown of the memory map of each process, look at the manual pages for pmap (man pmap), which will break it down by text, private data, zero initialized, shared and other types. By subtracting the shared size from the resident size you can get a true view of the private, local memory per oracle shadow server process.
John -
Oracle 11g install issues on Windows 7
I have had some problems installing Oracle on Windows 7 in that it seemed to crash while checking prerequisites. After several attempts it for some reason continued the installation. I had accepted the default settings and was installing from a USB drive to the same drive. The install did have a few error messages along the way such as "file not found. F:\app\ben\product\11.2.0\dbhome_2\oc4j\j2ee\oc4j_applications\applications\em.ear" and ""file not found. F:\app\ben\product\11.2.0\dbhome_2\ctx\admin\dr0ulib.sql.sbs". Also, towards the end it gave a message "Template General_Purpose.dbc does not exist. Please specify an existing template for database creation. <OK>". Despite these errors it seemed to successfully install. On the other hand I cannot log in to it as I attempt to try to set up some kind of basic database for myself. I go to the BIN directory and run sqlplus with "system" as the username and the password I had specified, but get the error "ORA-12560: TNS:protocol adapter error". Googling around a bit I tried to see if Oracle Services was running, but only saw OracleMTSRecoveryService and OracleRemExecService (and could not work out how to get any service running beyond what was listed there). I set up the path ORACLE_HOME to the BIN directory but there was not change in the situation. I just need a to set up a basic database on my PC so I can mess around with it. How can I get this going?
Thanks,
Ben928175 wrote:
Hi i am study oracle sql server and i have some experience with mysql not with pl-sql an i ned to nkow what are the mininum system requarements to install oracle 11g and if some body of you ca tell to me what version of oracle ca i install in a 3.4 ghz CPU and 1512 Gb of ram only for learn i want this :) http://www.belvini.de/weingut/mID/861/moet-und-chandon.htm
Edited by: 928175 on Apr 17, 2012 4:24 AM
Edited by: 928175 on Apr 17, 2012 4:25 AMYou should not hijack someone else's thread for your own problems.
All installation requriements are found in the Installation Guides, under your particular product in the doc library at tahiti.oracle.com -
Can Oracle 11g RAC and 10g RAC co-exists on same host
Can somebody tell me if it is possible to have Oracle 11g and 10g RAC installed and configured on same host.
Thanks,
-Zubairuser10948684 wrote:
Can somebody tell me if it is possible to have Oracle 11g and 10g RAC installed and configured on same host.
Thanks,
-ZubairYou have to use 11G Clusterware , if you want to use 11g Database and you can use 10g Database as well.
(You can not use 10g Clusterware and 11g Clusterware on the same host...)
But you can use 10g Database and 11g Database on the same host, But you have to use 11G Clusterware. -
Oracle 11g install problem on rhel 4.4
i was trying to install oracle 11g to rhel 4.4
during the install process , there are two warning when runing environment check
one is kernal parameter
i set four kernal parameter like this:
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
but oracle warning me they should be set as 419430
the other is swap space :
i set 2G,but oracle needs 4G.
i neglect them and continue
but when the install proceed 11percent , it stoped there and the i pose the install log is :
INFO: Method 'dispose()' Not implemented in class 'CustomConfigurationOptions'
INFO: config-context initialized
INFO: *** Install Page***
INFO: FastCopy : File Version is Compatible
INFO: Install mode is fastcopy mode for component 'oracle.server' with Install type 'Custom'.
INFO: Link phase has been specified as needed
INFO: Setup phase has been specified as needed
INFO: HomeSetup JRE files in Scratch :0
INFO: Setting variable 'ROOTSH_LOCATION' to '/home/oracle/ora11/DB10g/root.sh'. Received the value from a code block.
INFO: Setting variable 'ROOTSH_LOCATION' to '/home/oracle/ora11/DB10g/root.sh'. Received the value from a code block.
INFO: Performing fastcopy operations based on the information in the file 'racfiles.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_Custom_exp_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_Custom_dirs.lst'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_Custom_filemap.jar'.
INFO: Performing fastcopy operations based on the information in the file 'oracle.server_Custom_1.xml'.
INFO: Performing fastcopy operations based on the information in the file 'setperms1.sh'.
INFO: Number of threads for fast copy :1
INFO: FastCopy : The component info is ignored :oracle.network.cman:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.precomp.lang:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.odbc:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.rdbms.dv:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.rdbms.lbac:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.rdbms.dv.oc4j:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.odbc.ic:11.1.0.6.0
INFO: FastCopy : The component info is ignored :oracle.sysman.ccr:10.2.6.0.0
i do not know how to make it work ,please help me
thank you!This is the output from my current 11g installation on an OEL4:
Checking operating system package requirements ...
Checking for make-3.80; found make-1:3.80-6.EL4-i386. Passed
Checking for binutils-2.15.92.0.2; found binutils-2.15.92.0.2-21-i386. Passed
Checking for gcc-3.4.5; found gcc-3.4.6-3.1-i386. Passed
Checking for libaio-0.3.105; found libaio-0.3.105-2-i386. Passed
Checking for libaio-devel-0.3.105; found libaio-devel-0.3.105-2-i386. Passed
Checking for libstdc++-3.4.5; found libstdc++-3.4.6-3.1-i386. Passed
Checking for elfutils-libelf-devel-0.97; found elfutils-libelf-devel-0.97.1-3-i386. Passed
Checking for sysstat-5.0.5; found sysstat-5.0.5-11.rhel4-i386. Passed
Checking for libgcc-3.4.5; found libgcc-3.4.6-3.1-i386. Passed
Checking for libstdc++-devel-3.4.5; found libstdc++-devel-3.4.6-3.1-i386. Passed
Checking for unixODBC-2.2.11; found unixODBC-2.2.11-1.RHEL4.1-i386. Passed
Checking for unixODBC-devel-2.2.11; found unixODBC-devel-2.2.11-1.RHEL4.1-i386.
~ Madrid -
Oracle 9i Install on Solaris 8
I get the following output when I get to the part which runs make on file ins_plsql.mk;
$ pwd
/space/oracle9i/OraHome1/plsql/lib
$ /usr/ccs/bin/make -f ins_plsql.mk install /space/oracle9i/OraHome1
chmod 755 /space/oracle9i/OraHome1/bin
rm -f wrap
Linking wrap
yes /usr/ccs/bin/ld -o wrap -L/space/oracle9i/OraHome1/plsql/lib/ -L/space/oracle9i/OraHome1/lib/ -dy /space/oracle9i/OraHome1/lib/WS6U2/lib/v9/crti.o /space/oracle9i/OraHome1/lib/WS6U2/lib/v9/crt1.o /space/oracle9i/OraHome1/plsql/lib/s0plsw.o -lpsa9 -lpls9 -lplp9 -lclntsh `cat /space/oracle9i/OraHome1/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /space/oracle9i/OraHome1/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lwtc9 -lmm -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /space/oracle9i/OraHome1/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lnro9 `cat /space/oracle9i/OraHome1/lib/ldflags` -lnsslb9 -lncrypt9 -lnsgr9 -lnzjs9 -ln9 -lnl9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -ltrace9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 -lclient9 -lvsn9 -lwtc9 -lcommon9 -lgeneric9 -lnls9 -lcore9 -lnls9 -lcore9 -lnls9 -lxml9 -lcore9 -lunls9 -lnls9 `cat /space/oracle9i/OraHome1/lib/sysliblist` -R/space/oracle9i/OraHome1/lib -lm /space/oracle9i/OraHome1/lib/libplc9.a -lpls9 -lclient9 -lnl9 -lnro9 -ln9 /space/oracle9i/OraHome1/rdbms/lib/kpudfo.o -lmm -ltrace9 -lgeneric9 -lcommon9 -lslax9 -lcore9 -lunls9 -lsnls9 -lnls9 -lcore9 -lsql9 `cat /space/oracle9i/OraHome1/lib/sysliblist` -R /opt/SUNWcluster/lib/sparcv9:/space/oracle9i/OraHome1/lib -Y P,:/opt/SUNWcluster/lib/sparcv9:/usr/ccs/lib/sparcv9:/usr/lib/sparcv9 -Qy -lc -laio -lm /space/oracle9i/OraHome1/lib/WS6U2/lib/v9/crtn.o
sh: yes: not found
*** Error code 1
make: Fatal error: Command failed for target `wrap'
Does anyone know how to correct this? I have already gone into the gencintsh file and removed the line LD_SELF_CONTAINED. and clicked Retry again but I still get the above message in the make.log file.
Any help well appreciated.What is the server hardware configuration???
Maybe if you have less memory it's happen: 60 hours it's a very long time but you can try to install only the software and then that the installation is finished you can create the database with the database configuration assistant.
Try and say something.
Good Luck.
Daniele -
Help with oracle 10g install on solaris x86
hi, i downloaded solaris 10 from oracle site (sol-10-u8-ga-x86-dvd.iso) and i have installed it on vmware. i was going through the installation guide for oracle 10 for solaris x86 and while on the pre-installation steps, i issued this command
# /bin/isainfo -kv
and it gave me
# 64-bit amd64 kernel modules
instead of
# 32-bit i386 kernel modules
as the guide expected.
please what can i do, cos the guide says if i dont see the later, the installation cannot complete.
thnxFirst check you Operating System Bit information whether it is 64 or 32 bit , for this first check any of the command path
Example ls command
$ which ls
/usr/sbin/ls
$ file /usr/sbin/ls
It will show you whether your OS is 64 bit or 32 bit and accordingly download the software from below link ,if it is showing 64 bit os then you have to download 64 bit database software .
http://www.oracle.com/technetwork/database/database10g/downloads/index.html -
Oracle 11g install failure, error, Failed to allocate port(s)
I'm having a very hard time reinstalling Oracle 11gR1 x64 bit after the hard drive where I first installed it failed and had to be replaced. The database I'm trying to setup is for personal use on this system only. I'm running Windows XP professional 64 bit edition and have .net framework version 1.1.4322.573 installed.
During installation the process hangs at the Database Configuration Assistant stage and will not progress till I manually end the lsnrctl.exe process in taskmanager. During the completing database process at the end I get this error -
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
My first thoughts were the ports in question were in use or closed but I've been using both netbios and a port monitor program called currports to check and as far as I can tell the ports listed are open and not in use.
I did reconfigure the tnsnames.ora and listener.ora files to include valid port addresses (1521) and I can get the lsnrctl.exe to start manually now but still can't connect to the database using an open SQL command prompt.
I also tried running the emca.bat but still no change. I need help, I'm beating my head against the wall now.
Here are my etc/hosts, etc/services, and emconfig.log files
etc/hosts
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
172.23.153.30 gcihq1emconfig.log
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-migrate' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateFromDBControl' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateToCentralAgent' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateFromCentralAgent' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateToDBControl' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-migrate' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateFromDBControl' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateToCentralAgent' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateFromCentralAgent' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'migrateToDBControl' set to false
Mar 22, 2010 5:48:04 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: LOG_FILE value: G:\MainDB\cfgtoollogs\dbca\MainDB\emConfig.log
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: HOST value: gcihq1
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: PORT value: 1521
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SID value: MainDB
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: LISTENER value: LISTENER
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: LISTENER_OH value: G:\MainDB\DBHousing
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-config' set to true
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'db' set to true
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: EM_HOME value: G:\MainDB\DBHousing
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: MainDB
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: MainDB
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: ORACLE_HOME value: G:\MainDB\DBHousing
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'dbcontrol' set to true
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'UPDATE_EMAIL' set to false
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag '-backup' set to false
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'create' set to false
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig addEMCALogFile
CONFIG: ORACLE_BASE :G:\MainDB
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file G:\MainDB\cfgtoollogs\emca\emca_2010_03_22_17_48_04.log to G:\MainDB\cfgtoollogs\emca\MainDB\emca_2010_03_22_17_48_04.log
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at G:\MainDB\cfgtoollogs\dbca\MainDB\emConfig.log.
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'CHECK_CONFIG' set to true
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:53 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: DBSNMP
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'asm_db' set to false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbServiceName
CONFIG: No service name available. Will try to set db_unique_name.db_domain
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value:
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_UNIQUE_NAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbUniqueName
CONFIG: No Database unique name available. Will try to retrieve it from DB itself
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: MainDB
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DB_UNIQUE_NAME value: MainDB
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: SERVICE_NAME value: MainDB
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbid
CONFIG: No dbid available. Will query db to extract it.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: DBID value: 1536995688
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYSMAN
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.EMDBPreConfig invoke
CONFIG: Passed repository configuration check
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter MODIFY_SID.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter GLOBAL_DB_UNIQUE_NAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getGlobalDbUniqueName
CONFIG: No Global database unique name available. Will try to retrieve it from DB itself
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine connecting with SID: MainDB, oracleHome: G:\MainDB\DBHousing, and user: SYS
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.GeneralUtil initSQLEngine
CONFIG: SQLEngine created successfully and connected
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DB_DOMAIN.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.DatabaseChecks getDbDomain
CONFIG: No db domain available. Will query db for db_domain parameter
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setParam
CONFIG: Setting param: GLOBAL_DB_UNIQUE_NAME value: MainDB
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file G:\MainDB\DBHousing\sysman\config\emd.properties to G:\MainDB\DBHousing\sysman\config\emd.properties.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file G:\MainDB\DBHousing\sysman\config\emd.properties has been copied to G:\MainDB\DBHousing\sysman\config\emd.properties.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file G:\MainDB\DBHousing\sysman\config\emoms.properties to G:\MainDB\DBHousing\sysman\config\emoms.properties.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file G:\MainDB\DBHousing\sysman\config\emoms.properties has been copied to G:\MainDB\DBHousing\sysman\config\emoms.properties.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil _copyFile
CONFIG: Copying file G:\MainDB\DBHousing\sysman\emd\targets.xml to G:\MainDB\DBHousing\sysman\emd\targets.xml.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.FileUtil backupFile
CONFIG: The original file G:\MainDB\DBHousing\sysman\emd\targets.xml has been copied to G:\MainDB\DBHousing\sysman\emd\targets.xml.emca.tmp
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil isCRSInstalled
CONFIG: isCRSInstalled: false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: Cluster.isCluster: false. Skip call to getLocalNode
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_RECONFIG' set to false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.CentralAgentUtil isCentralAgentConfigured
CONFIG: Sid: MainDB Host: 172.23.153.30 Node: null OH: G:\MainDB\DBHousing agentHome: null isCentral: false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: MainDB Host: 172.23.153.30 Node: null OH: G:\MainDB\DBHousing isDBC: false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_CENTRAL_AGENT_CONFIGURED' set to false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager setFlag
CONFIG: Flag 'IS_DBCONTROL_CONFIGURED' set to false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.DBControlUtil isDBConsoleConfigured
CONFIG: Sid: MainDB Host: 172.23.153.30 Node: null OH: G:\MainDB\DBHousing isDBC: false
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter PORTS_FILE.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.ClusterUtil getLocalNode
CONFIG: isLocalNodeDone: true localNode: null
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT_MainDB.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter JMS_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT_MainDB.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter RMI_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT_MainDB.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter DBCONTROL_HTTP_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT_MainDB.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter AGENT_PORT.
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.OUIInventoryUtil setOUILoc
CONFIG: Setting oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Homes to scan for used ports: [G:\MainDB\DBHousing]
Mar 22, 2010 5:51:54 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Searching all DBConsole instances for used ports under ORACLE_HOME G:\MainDB\DBHousing
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking JMS port: null from G:\MainDB\DBHousing\oc4j\j2ee\OC4J_DBConsole
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking RMI port: null from G:\MainDB\DBHousing\oc4j\j2ee\OC4J_DBConsole
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking HTTP port: null from G:\MainDB\DBHousing\oc4j\j2ee\OC4J_DBConsole
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager getAgentPort
CONFIG: Cannot parse EMD_URL correctly. No port identified
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Marking Agent port: null from G:\MainDB\DBHousing\sysman\config\emd.properties
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.PortManager markAllUsedPorts
CONFIG: Cannnot parse EMD_URL correctly. No port identified
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.util.FileUtil getProperties
CONFIG: Error reading file G:\MainDB\DBHousing\install\staticports.ini
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
Refer to the log file at G:\MainDB\cfgtoollogs\dbca\MainDB\emConfig.log for more details.
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Failed to allocate port(s) in the specified range(s) for the following process(es): JMS [5540-5559],RMI [5520-5539],Database Control [5500-5519],EM Agent [3938] | [1830-1849]
at oracle.sysman.emcp.EMDBPreConfig.checkPorts(EMDBPreConfig.java:2481)
at oracle.sysman.emcp.EMDBPreConfig.performConfiguration(EMDBPreConfig.java:744)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:251)
at oracle.sysman.emcp.EMDBPreConfig.invoke(EMDBPreConfig.java:178)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:221)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:460)
at java.lang.Thread.run(Thread.java:595)
Mar 22, 2010 5:51:55 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to G:\MainDB\DBHousing\oui
------------------------------------------------------------------------------------------------------------------------------
Maybe you are looking for
-
Performance Issues in Win 7 (Pro to Ultimate)
I use Avast as my virus protection. I have recently tried to uninstall Unity Web Player, but I can't get it out, no matter what I do (which includes removing all "unity" info in the registry, all folders with the player info, and through the control
-
How to get my images always order by arquive name, and not by time of captur, in all the folders in the library? Sorry for the poor english, but im portugues. In the library we can change the order of classification of image by, time of capture, name
-
Greyed out rent and buy buttons on itunes - using iPad2
Dear All, Seeking the collective wisdom. I am unable to rent or buy videos from itunes on my iPad2. The "buy it" and rent it" buttons are greyed out. The only feasible explantion so far would have been if there were restrictions on but I have checked
-
Material rejected through quality inspection lot goes to blocked stock
Dear All, All materials that are rejected through quality inspection lot should go to blocked stock. My client want to generate a report for viewing what all materials are rejected. How can do that? scenario2: If the materials are rejected then can t
-
Data collection and exportin collected data.
So, I need to be able to find a app or web app that will work with Ipad/Iphone that I can collect data while Im in the field and when I return to my PC I can sync the info to have it poplulate a pre-existing PDF document. Is there such a way to do th