Can Oracle 11g R2 RAC and database sit on Windows 2008 R2?
Thanks.
2008 32 bit it is certified...
2008 64 not certified yet.
the certification matrix within MOS does not indicate 2008 R2 so you might be good for 32 bit.
NOTE: just double checked the matrix and it is certified for windows 2008 R2 x64
Product Oracle Server - Enterprise Edition
Product Release 11gR2 RAC
Product Version 11gR2 RAC
Tier Server
Tier Product N/A
Tier Product Version N/A
Platform Microsoft Windows x64 (64-bit)
Platform Version 2008 R2
Certification Status Certified
Expand All | Collapse All
Expand to view Notes Notes
Expand to view Certification Notes Certification Notes
Edited by: rui_catcuddler on Jul 22, 2010 10:02 AM
Similar Messages
-
Can Oracle 11g RAC support 2 separate databases?
1. Can Oracle 11g RAC support 2 separate databases given that it asks for SCAN ip for cluster with a single Listener port number?
2. Will the Oracle 11.2 database connections work successfully if I setup a mandatory DNS server within the Oracle RAC servers?
I'm leading a team for a 11g project and appreciate responses.
Thanks
Satish.No Real Application Cluster technology has ever supported more than one database.Quite untrue.
I know that both you and Tom Kyte take the stand that a cluster should have only 1 instance per node.
That doesn't mean that it is not possible to have more than one database in a cluster -- i.e more than one instance in a node.
That doesn't mean that it must always be so. Installing a separate cluster and additional EE + RAC licences for a separate database can be quite expensive. Of course, your reply is "consolidate". That is another debate that has been going on for years.
A discussion on multiple databases on RAC is also at
http://www.freelists.org/post/oracle-l/multiple-databases-in-a-single-RAC-cluster
Hemant K Chitale
Edited by: Hemant K Chitale on Jan 12, 2010 11:15 AM -
Snapshot standby database in oracle 11g r2 RAC
Folks,
i am just wondering if the process is same for standalone and RAC snapshot standby database.
We have a DR test
1 / I just converted the standalone DR on 11g to snapshot standby database for users to do some testing and reverted back to physical standby after test was done. i folllowed metalink note ID 443720.1
2/ now there is anotherDR test where we have 2 node prod and 2 node DR on oracle 11g rel2 RAC, so not sure we can follow the same process that i used for 11g standalone database. If somebody have done this on RAC, would you please provide the steps ?
Thanks in advance
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> !uname -a
Linux 2.6.18-164.el5 #1 SMP Thu Sep 3 03:28:30 EDT 2009 x86_64 x86_64 x86_64 GNU/LinuxI haven't done a Snapshot Standby (RAC or non-RAC). But I see no reason why it shouldn't work with a RAC Standby either.
The command is a Database level command, not an Instance level command.
Hemant K Chitale -
Hello everyone,
I have install windows XP in my existing windows 7 64 bit system using virtualization software. I have allocated 1024 MB of RAM to XP virtual windows.
Now, M trying to install oracle developer suite 10g and oracle database 11 in the XP windows.
IS 1GB ram is enough for the installation of oracle developer suite 10g and database 11g???
And which one to install first developer suite or database????
Thanks in advance.you should check (before installing) requeriments from documentation.
Oracle Developer Suite Installation Guide 10g (10.1.2.0.2) for Solaris, Windows and Linux x86
Table 4 Memory Requirements for Oracle Developer Suite Components
Component
Memory
Oracle10g JDeveloper (including Oracle Business Intelligence Beans, and UIX and Bali subcomponents)
Minimum: 256 MB
Recommended: 512 MB
Oracle Reports Developer
Minimum: 128 MB
Recommended: 256 MB
Oracle Forms Developer
Minimum: 128 MB
Recommended: 256 MB
I usually install first database and later DS, I never tried first DS and later database. -
ASM Installation on Oracle 11g Clusterware (RAC) environment
Hi All,
I am trying to setup Oracle 11g Standared Edition RAC+ASM on RedHat Linux 5.0 VM ware box. As part of this RAC setup successfully completed. For this i have used raw devices and mounted using NFS.
In many of forumns i have read that ASM installtion on a cluster envioronmnet is different than non cluster environment.
I dont know how to start ASM installtion on RAC environment. Please share any documents if you have?
Thanks,
Rakeshwill the steps need to be done on two nodes of cluster or it is sufficient on first node.
"raw device" for OCR, VOTE, SPFILE_FOR ASM and ASM DISKGROUPs
before do "raw devices" you have to fdisk(make partitions) on share storages
node1:
# fdisk /dev/sdf
# ls /dev/sdf*
node2:
# ls /dev/sdf*
don't find...,so just fdisk -> l and -> w
fdisk how? http://linux.about.com/od/commands/l/blcmdl8_fdisk.htm
Example: /etc/sysconfig/rawdevices do it every nodes
#Oracle OCR File +~280M+
/dev/raw/raw1 /dev/sdf1
#Oracle Voting File +~280M+
/dev/raw/raw2 /dev/sdf2
#Oracle ASM spfile ~50M+
/dev/raw/raw3 /dev/sdf3
#Oracle ASM DISK Group1
/dev/raw/raw4 /dev/sdg1
#Oracle ASM DISK Group2
/dev/raw/raw5 /dev/sdh1
And oracle user.. can read /dev/raw/raw* You should find on every nodes
http://oraclepitstop.wordpress.com/2008/02/15/raw-devices-on-rhel-5-or-oel-5/
ls -la /dev/raw/raw*
crw-rw---- 1 root oinstall 162, 1 Jan 13 12:53 /dev/raw/raw1
crw-rw---- 1 oracle oinstall 162, 2 Jan 13 12:53 /dev/raw/raw2
crw-rw---- 1 oracle oinstall 162, 3 Jan 13 12:53 /dev/raw/raw3
crw-rw---- 1 oracle oinstall 163, 1 Jan 13 12:53 /dev/raw/raw4
crw-rw---- 1 oracle oinstall 164, 1 Jan 13 12:53 /dev/raw/raw5
do it on node1 but you have to pass phrase on every nodes Before
http://www.puddingonline.com/~dave/publications/SSH-with-Keys-HOWTO/document/html/SSH-with-Keys-HOWTO-5.html
example:
node01:
$ ssh node01 hostname
node01
$ ssh node02 hostname
node02
- Install + Setup Clusterware:
OCR = /dev/raw/raw1
VOTE = /dev/raw/raw2
- Install Oracle Database for ASM Home
spfile for ASM = /dev/raw/raw3
- after ASM started... create disk groups from /dev/raw/raw4 and /dev/raw/raw5
- Install Oracle Database for RDBMS Home
- Create Database to use ASM diskgroups
http://www.oracle-base.com/articles/11g/OracleDB11gR1RACInstallationOnRHEL5UsingVMwareESXAndNFS.php
Did you followed the same procedure to set up Oracle 11g RAC+ASM on RHEL 5.0.I'd done(test 11gRAC) it on RHEL 4 + 11g + ASM(on raw device)
on production, I use ASMlib... + ASM + 10g
you can read on metalink to help idea
465001.1
357492.1
605828.1
564580.1
on http://startoracle.com/2007/09/30/so-you-want-to-play-with-oracle-11gs-rac-heres-how/
Oracle 11g’s RAC.. I think.. that can help you ;)
Good Luck
Edited by: Surachart Opun (HunterX) on Jun 26, 2009 11:22 AM
Example from IBM... Deploying Oracle RAC 11g R1 on RHEL 5 or SLES 10 with Oracle ASM on the IBM DS3400, DS4200, DS4700, and DS4800 Storage Subsystems
http://www-03.ibm.com/support/techdocs/atsmastr.nsf/WebIndex/WP101323
Edited by: Surachart Opun (HunterX) on Jun 26, 2009 11:27 AM -
How to monitor oracle 11g database sessions on Windows 2008 server?
Hi Experts
How to monitor the Oracle 11g database sessions on Windows 2008 server (other than SQL Developer tool), which procedure or query is taking more time with Java application.Recently i found this tool- myorasql on the net to monitor the performence of database, easy to setup and check the performence. i never tested it but seems impresive. It is free and i think it would be use ful to you.
http://myorasql.com/
You can also use Quest - Toad or sqlplus if you are very good at sql commands and all dictionary tables or OEM/EM grid if it is configured . -
Oracle 11g Server Installation and Configuration
Hi All..
I would like to know the estimate(in detail) for Oracle 11g Server Installation and Configuration.
This is for a server and we might even need to replicate the entire DB.
Can any on please help me out in this .
Thank youHi,
Please post your question in the [Database |http://forums.oracle.com/forums/category.jspa?categoryID=18] forum.
Regards,
Hussein -
Can oracle work in shared and dedicated mode at the same time?
Hi All,
can oracle work in shared and dedicated mode at the same time?
ThanksA database can work only in one mode at a time.
If the database is started in Dedicated Mode then it can not run in the Shared Mode. If you need to run it in the Shared Mode, bring down the Database , change DISPATCHERS, SHARED_SERVER, SHARED_SERVER_SESSIONS parameters in initfile and bring up the database to run it in Dedicated Mode.
But there is one catch here, if you have started the database in Shared Server Mode even then you can make a Dedicated connection to server.
Thanks!
M- -
Hi All,
I have read many blogs and article about installing Oracle 11g R2 RAC on vmware. For self learning process what should be minimum configuration of hardware.
Minimum physical memory will be 8 GB what is minumum processor required ( 2 Cores / 4 Threads) or ( 4 Cores / 8 Threads)?
Native operating system will be Windows 7 64 bit.
Thx.You wouldn't be doing much with the processors so it won' t matter hugely having a dual or quad core. As long as there is sufficient RAM(like 8gig) , you should be fine. Try to get SSD if you want more faster performance from the machine in terms of IO.
Aman.... -
Can Oracle APEX work with other databases?
Can Oracle APEX work with other databases like Microsoft SQL Server or Sybase... etc.?
Though, the Generic Connectivity does not cost extra.
It doesn't have all the features of Transparent Gateway, but if you can access the foreign database with an ODBC driver,
it's an easy way to integrate multiple databases.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14232/gencon.htm#HETER007
In one application, I pull data into materialized views from MS Access and Lotus Notes.
Since Apex lives in an Oracle database, it inherits all of the functionality of Oracle.
There's not much it can't do. -
Can oracle 11g installed on solaris 8 ?
Can oracle 11g installed on solaris 8 ?
Other what is the minimum solaris supported to install oracle 11g.
Thank you in advance..[email protected] wrote:
Can oracle 11g installed on solaris 8 ?
Other what is the minimum solaris supported to install oracle 11g.
Thank you in advance..In general, each product has an installation manual - found through http://docs.oracle.com and possibly http://tahiti.oracle.com and the install manual clearly identifies the (minimum) support OS and Release information. -
Oracle 11g R2 RAC installation on AIX
hi,
I wana setup Oracle 11g R2 RAC on Ibm with AIX. Is there any good document or cookbook explaining step by step procedure for the installation...I'll be thankful
thanxHi;
Please check below links which is mention about 11gR2 Rac installation on AIX
11gR2 RAC installation in AIX help urgent
Re: 11gR2 RAC installation in AIX help urgent...!!!!
11gR2 RAC Installation Manual (with ASM+Rawdevice)
http://www.goodus.com/knowledge_pds/%EA%B8%B0%EC%88%A0%EB%85%B8%ED%8A%B8_11gR2_RAC_Guide.pdf
Regard
Helios -
Upon Removing Ubuntu, How can I Extend the C and D Drive in Windows 7?
Upon Removing Ubuntu, How can I Extend the C and D Drive in Windows 7?
Previously, my Computer had Windows 7 and Ubuntu as a dual Boot. I followed some online instructions on how to Delete Grub (Ubuntu's Startup Boot Menu) and Ubuntu Partitions (<edited>) and it worked. I wanted to expand my remaining C and
D Partitions, but I couldn't figure out how to do it.
Windows 7's Disk Management shows my Laptop's only Disk divided into 3 logical drives ( i.e., the Recovery Drive, C, and D Drives). The Order of the Drives is Disk 0 is:
1.46 GB - Recovery Drive
53.71 GB - C Drive
42.79 GB - Free Space
191.19 GB - Drive for my Personal Data/Files
8.93 GB - Unallocated
NOTE: The Free Space and D Drive have a Green Box around them.
I would like to take the Free Space and Unallocated Space and apportion it between the C and D Drives., as stated prior, I'm not sure how to do this. Do you have any reliable and
preferably free options?Hi Bobby Marlee,
Please share us a screenshot about disk management.
If my understanding is right, you want to extend the C and D drive by using the free space and unallocated space.
If you want to use Disk Management to extend the drive space, I think we need to back up the files and delete Free Space, Drive for my Personal Data/Files, and then extend C: drive and create D: drive by using the Unallocated space.
For more information, please refer to the following article.
http://technet.microsoft.com/zh-cn/library/cc771473.aspx#BKMK_WINUI
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support -
I have a MacBook Pro runing Mac Os 10.6.8, and a partition runing windows 7, I want to Upgrade to Maverick.
Can I upgrade to maverick, and still working with windows partitions without any problem?yeah I installed win7 64bit pro on lion and have since upgraded osx to mtn lion and then mavericks
and the windows partition to win8 and then win8.1 never done a reinstall of anything -
Oracle Warehouse Builder 10.1.0.4 on Windows 2008 - 64 bits
Hi Gurus.
I'm currently working with a customer who wants to migrate all their database-servers to Windows 2008 on 64-bits processors. They're using Oracle Database Enterprise Edition 10g Release 2 (10.2.0.4) and Oracle Warehouse Builder (10.1.0.4). The OWB-clients will still run on Windows XP. I've used the "Certify"-funcionality on Metalink, but it doesn't really answer my questions. (It does* ansver some of my questions, but it also raises a few new ones....)
My main question is: Can you run serverside OWB 10.1.0.4 on Enterprise Edition 10.2.0.4 for Windows 2008 64-bits?
Thanks in advance:-)
Best regards
Helge
Edited by: user613304 on Mar 6, 2009 11:10 PMNo.
Oracle Warehouse Builder version 10.1.x was desupported on 16-JUL-2007.
The desupport notice is available on Metalink (Note 376384.1).
The Warehouse Builder installation as part of the 11.1.0.7 installation should be certified, but I cannot find specifics.
Maybe you are looking for
-
How to speed up export in Adobe Premiere CC
Can somebody talk me thru the basics of exporting media in Adobe Premiere CC? I have a one-hour movie with some lighting effects applied. I can't believe how long it takes to export. The quickest combination I could find was exporting to Quicktime an
-
FW: (forte-users) Copy Input parameter
Peter, That is the behaviour that I have experienced also, so I do not have such (anchored service object) attributes in my classes anymore but instead add that service object attribute as an input parameter to all methods in that class that require
-
Will we ever see a proper link to new posts again? Links now only take you to the thread and in Threaded view it's a pain to locate new posts in large threads. This To view the topic, visit: http://discussions.apple.com/thread.jspa?threadID=1174821 a
-
WWhen trying to send an email or message from my Dad's new IPhone 5 it will not work. It reads SMTP not recognized. Verizon said it's the phone but he had no problem before updates. He is using a comcast email. Verizon also said we'd have to go to th
-
HT5622 why i can't see me emails in my iclould?
Hi there, Please help me to solve this issue with my icloud. I cannot see my emails that is associated with my account. Can you help on this? Thanks,