Can Oracle 8.1 install at window XP?

dear all,
i would like to know if the Oracle 8.1 for NT/2000 can be installed for window XP or not?
thanks
moises

Yes! You can install Oracle 8.1 on WindowsXP. Then
only problem I've found is that the OracleStart
service give you an error during start up. This is
not a problem, Oracle instance start up corectly even
if there is this error.
I still get the same behaviour running Oracle9i (9.2.0.1.0) on XP. But only when I attempt to start after not having stopped the db properly before (e.g. by simply restarting or shutting down the pc without caring about the Oracle services running in the background).

Similar Messages

Can Oracle Lite be installed on RHEL4

hi
Can Oracle Lite be installed on RHEL4 and 11.5.10 EBS database?
Thanks
JIL

Hi,
Oracle Lite 10GR2 or R3 can be installed on RHEL4.
The Mobile Server can use any Database from 8.1.7.x or highter.
Regards.
MArc

Can't start the tns Lisenter -oracle xe 11g installed on window 7 64 bit

Hi
I have followed the below website's advise installed xe 11g R2 on my window 7 64 bits.
http://blog.mclaughlinsoftware.com/2011/09/13/oracle-11g-xe-installer/
It worked at the time when I installed. but the next day, I restart the pc , then I can access to the SQL common line window, I tried to start the tnsLisenter service from the control panel, then there is an error :
The oracleXETNSListener service on local Computer started and then stopped. Some service stop automatically if they are not in use bu other service programs.
of course, I am not able to connect to the home page too.
http://127.0.0.1:8080/apex/f?p=4950 ---- page not found
Lisnter file:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST =127.0.0.1)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
Can anyone help?
many thanks

Lang wrote:
Hi
I have followed the below website's advise installed xe 11g R2 on my window 7 64 bits.
http://blog.mclaughlinsoftware.com/2011/09/13/oracle-11g-xe-installer/
It worked at the time when I installed. but the next day, I restart the pc , then I can access to the SQL common line window, I tried to start the tnsLisenter service from the control panel, then there is an error :
The oracleXETNSListener service on local Computer started and then stopped. Some service stop automatically if they are not in use bu other service programs.
of course, I am not able to connect to the home page too.
http://127.0.0.1:8080/apex/f?p=4950 ---- page not found
Lisnter file:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST =127.0.0.1)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
Can anyone help?
many thanksWhich Windows Edition do you have?
It is not clear to me what have.
Are OS Services for both DB & Listener started?
open Command Window & issue the following OS commands
lsnrctl start
lsnrctl status
lsnrctl service
COPY commands & results then PASTE all back here

Oracle 11g R2 Install on Windows 7 64 bit setup.exe does not work.

Hi
I am trying to install Oracle 11g R2 on my Windows 7 Ultimate 64 bit. When I execute setup.exe as Administrator the command window flashes and exits. I could not even see what the message is. Also tried command prompt. Can anyone help me resolve this issue?
Appreciate your support.
Regards

user1484609 wrote:
Installation Successful after executing the install from C:\temp and not within users. Even if you execute as Admin Oracle Install does not have access to the folders in C:\Users...
Finally the install is successful.Congratulations.
And thank you for posting your solution. The security issue was quite a surprise to me as well, although it ties into a PC World article I read today.
To continue, please make sure you have a static IP address. If your system uses DHCP, that may mean setting up Loopback Adapter, configuring a static IP address other than 127.0.0.1 for that (for example you can use 192.168.123.101), and updating C:\windows\system32\drivers\etc\hosts. (note - no 3 char 'type on the hosts file) to include an entry like '192.168.123.101 myhost.example.com myhost', and perhaps setting your ORACLE_HOSTNAME variable. This is all described well in the Install documentaiton at http://download.oracle.com/docs/cd/E11882_01/install.112/e10843/reqs.htm#BABIAEEC

Oracle win 11gr2 install in Windows 7 environment

I installed oracle 11gr2, the installation went very well. I could login to sql plus created tables and query the database.
Only one thing i see is different than past installations is that oracle files are installed in c:\app\userid\ admin... and other files in that path.
My experience in the past is to define oracle hone and files are found there.
is it going to be a problem when I use third party tools like erwin, toad etc.
how do i fix the problem. I tried to connect to the database thru erwin and had problem.
Thank you
j

C:\Users\sidhwaneyj>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 28-JUN-2012 09:46
:06
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 28-JUN-2012 08:08:35
Uptime 0 days 1 hr. 37 min. 32 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\sidhwaneyj\product\11.2.0\dbhome_2\network\admi
n\listener.ora
C:\Users\sidhwaneyj>lsnrctl service
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 28-JUN-2012 09:47
:58
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl.ijetcorp.com" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:135 refused:0 state:ready
LOCAL SERVER
Service "orclXDB.ijetcorp.com" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: IJET394, pid: 3640>
(ADDRESS=(PROTOCOL=tcp)(HOST=IJET394.ijetcorp.com)(PORT=49207))
The command completed successfully
Listener Log File c:\app\sidhwaneyj\diag\tnslsnr\IJET394\listener\alert\
log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl.ijetcorp.com" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB.ijetcorp.com" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully

Can Oracle 9i be installed on non-server Mac OS 10.3?

Hello All,
I apologize if I'm repeating questions, but I've combed the forums for an answer to this question and I've been unable to find much info.
I need to install Oracle 9i on my Ti PowerBook (10.3.2, 1 GHz G4 processor, 1 GB RAM). I want the DB server in addition to the client. All the documentation I found refers to 10.2 server.
Has anyone done this successfully? I'm currently taking a Java course devoted to JDBC and JSP. The instructor chose Ora 9i as the DB. I'm the only non-Windows XP machine in the class. Fortunately the instructor is a UNIX user, so he's fine with me using my Mac. He's even agreed to let me use MySQL in this isolated case. However, I'd really like to get Ora working if I can.
Any information anyone could provide would be greatly appreciated.
Thanks in advance,
Larry Polk

I have installed oracle9i on my imac with 10.2

Why does Oracle 8i not install on Windows XP?

Further to the question B4, Why does Orcale 8i not install on Pent 4?. I have no answer put I'm also trying to install 8i client on a Pent 4 running Windows XP Pro. I get no Error messages it just does not install.
Can any one through any light on this.

We have run in a installer Problem too on IBM Thinkpad.
P4 makes trouble.
There is a patch # 1507768 with a workaround
and a 15.3 MB zip.
ORACLE says :
Patch 1507768
Description INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4 (IV) PROCESSORS
Product Universal Installer
Release Installer 1.7.1
Select a Platform MS Windows NT/2000 Server
Select a Language American English
Last Updated 06-APR-2001
Size 15M (16097224 bytes)
this helps maybe ...
fritz

Re: Portege M800 - can't get bluetooth installed in Windows 7

Hi, I have a portege M800 PPM81C-07602D. It came with windows vista but I have reinstalled it to windows 7, and now I can't get the bluetooth drivers to install. I've tried the old vista drivers as well as the newer windows 7 drivers, but whenever I run the install I get the message "Please plug in the bluetooth device and click ok button."....If I click ok it just pops up again. I don't know why it wouldn't be finding the internal bluetooth....I dont think there's a physical on/off switch for the BT anywhere, and I looked to see if it had been disabled in the bios but there was nothing in there about it...so...I'm out of ideas.
Anyone have any thoughts I can try?
Any help is appreciated, thanks!

Toshiba Bluetooth stack can be installed if the BT module is enabled properly so use FN+F8 key combination to enable BT module.
After doing this BT should be recognized and installed properly (you will se BT entries in device manager).

Can LabView Japanese be installed on Windows XP MUI with Japanese as the default language?

I recently set up a computer for a client in Japan using Windows XP PRO MUI version. When they tried to install their Labview Japanese, it "turned into garbled characters."
From the Microsoft link it appears there are some differences between a fully localized Japanese Windows and the MUI version"
on localized versions:
The user interface resources are fully localized.
The
Windows Setup information, such as system locale, user locale, keyboard
layout, etc. is customized for the specific language/country. This is a
policy setting with the Multilingual User Interface Pack.
Additional country specific device drivers are added in the East Asian versions only.
There
is support for upgrades from localized versions of Windows 9X or
Windows 2000 to localized Windows XP. MUI only supports upgrades from
English versions.
Because the resources used in a localized
version are used to create MUI, there is no difference between the
actual translations. This results in a nearly full localization, apart
from small elements that are still dependent on:
INF files.
UI strings stored in the registry.
etc.
My question: Should it be possible to install Japanese Labview on top of Windows MUI with Japanese set as the user language and default language? My assumption was Yes, but now they appear to be unable to get this to work. Are there specific workarounds, policy changes, or drivers that can be done to get this to work?
Thank you in advance for any help or insight you can provide, or if you can point me to a better place to post this (I don't know Japanese myself).

Hi,
Here you have some interesting tutos about foreign languages in LV :
Localizing Your LabVIEW Application to Different Languages
Localize LabVIEW Applications in Multiple Languages
Let me know what happens.
Regards,
Message Edité par Steve Mohamed le 02-27-2009 09:02 AM
Steve M.
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
>> Vidéo-t'chats de l'été : présentations techniques et ingénieurs pour répondre à vos questions

Oracle 10G client Install on Windows

We recently had our Oracle client upgraded from Oracle 9i to Oracle 10G. Now when we sign into the Oracle Enterprise Manager Console, select a user schema and right click on a table to View/Edit Contents, the records display but when i select a record and try to right click to Add Row / Delete all i get is a solid gray bar, so i can't delete the record. I am thinking this may be a permission problem of how the client was installed, but have no idea where to start. Any help from anyone will be greatly appreciated.

Use this step-by-step guide.
http://faq.programmerworld.net/database/installing-oracle-10g.html
http://www.procurar.pt http://www.wallpapers.pt

Can applications run or install in Windows PE?

I'm trying to create a Windows 8.1 image for a tablet. To make the image work for multiple computer models, I tried adding a WMIC query to filter the drivers by model. However, it fails and crashes to the red screen when I try to use it. It
appears that WMI queries do not work on this system unless you install the "WMI Provider" application. This is an EXE installer. I tried importing the driver files in the application folders, but it still failed to work.
The deployment guide for the tablet says:
"If BIOS access via WMI is needed when in a WinPE environment, the HP ElitePad 1000 WMI Provider needs to be installed or
added to the boot image prior to any WMI access. See the HP ElitePad 1000 WMI Provider documentation for details on
setup and usage."
However the "documentation" is not helpful. It basically is only a readme text file that says click on the setup file and follow the prompts.
Can exe based applications be installed in a WinPE 5.0 environment?
Is there another way to do this so I don't have to have a separate task sequence for each model of computer using this Windows 8.1 image?

I need to correct a few assumptions listed above.
1. Drivers that are installed *only* via a *.exe wrapper program won't work with the built-in MDT driver framework. If they are non-critical drivers, you can install them during the State Restore phase of MDT. If they *Are* boot critical, you will need to
extract them out.
http://keithga.wordpress.com/2013/12/09/mdtosd-driver-management-overview/
2. the WMI provider *IS* available for MDT LitetouchPE_???.wim images, so I don't understand your comment above that WMI is not. Unless you are talking about a specific WMI provider add-on for the ElitePad 1000, which I doubt.
3. Additionally, you can't install drivers for the full OS from Within the WinPE phase, that would install the drivers into WinPE, not the full OS.
4. Listen to Johan.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

HT1926 How can I download and install for Windows 2000?

How can I install iTunes for Windows 2000?

Even if you would manage to find one of the ancient versions of iTunes, like from here: http://www.oldapps.com/itunes.php,
it will be very likely not to work on Windows 2000 and also not being accepted by Apple's servers.

Oracle failed to install on Windows 7 CONFIG: ORA-12514

error
The following is the error from the log file. I have tried updating tnsnames.ora (it was having the IP address as host, changed it to localhost), still not working. Any help would be appreciated. I also tried removing oracle totally and re-installing. But it failed again at the same place.
May 9, 2012 8:09:48 PM oracle.sysman.emcp.ParamsManager checkListenerStatusForDBControl
CONFIG: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Environment:
Windows 7 Professional on Virtual Server

lsnrctl statusLSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 09-MAY-2012 21:23
:01
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 09-MAY-2012 19:59:52
Uptime 0 days 1 hr. 23 min. 11 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\Oracle\Database\product\11.2.0\dbhome_1\network\adm
in\listener.ora
Listener Log File c:\oracle\database\diag\tnslsnr\WIN-B0VP872QQNU\listen
er\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.21.129)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
lsnrctl serviceLSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 09-MAY-2012 21:25
:08
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
The command completed successfully
Edited by: user1021516 on May 9, 2012 9:26 PM

Oracle Xe 11 install on Windows 8

Hello..
I'd trying without successfull to install oralce xe 11 on windows 8..
I got install it without error's, but the pasta oradata is empty !
Someone know a way to install for complete ?
Thanks !

Can't help with Win8.
How about going with a virtual machine, try linux. If you're using x64 hardware the linux version is about the only choice for XE anyway.
Virtual Box is pretty easy, at least for me much easier than some of the other virtual machine programs. Again, can't say much about how well it works for Win8 but try it and see ... https://www.virtualbox.org/

Can Webcenter suite be installed on Windows 8?

Hi All
Wanted to check if anyone has tried installing webcenter on windows 8? Is it supported?
Thanks

Windows 8 is not listed on the oracle certification matrix, here is the link for your reference,
http://www.oracle.com/technetwork/middleware/webcenter/portal/downloads/index.html
so you might expect some unknown errors i hope,

Can Oracle 8.1 install at window XP?

Similar Messages

Maybe you are looking for