Can Oracle 8i Parallel server use ICC on OpenVMS 7.2-1 ? How ?

Hi,
-In a OpenVMS V7.2-1 cluster (with memory channel) can Oracle 8i
Parallel
Server be configured to communicate using ICC (Intra Cluster
Communication OpenVMS system services) and hence SCA over Memory
Channel instead of TCP/IP over Ethernet ?
- How do you configure this ?
Thanks by advance
hf

For who may be interested, i got the answer from
OpenVMS Engineering. This version of Oracle cannot use ICC
on OpenVMS.

Similar Messages

Using Oracle's Parallel Server for synchronizing databases with different tables

Hello,
I have a problem and I was searching through the Oracle documentation.
Then I mentioned the Oracle's Parallel Server (OPS) feature.
The problem I want to fix is the following:
I want to make a copy of a database. Subsequently I want to make changes to the copy of the original database. (possible changes could be extra columns).
Now I want to synchronize the data of both databases...
Is it possible to use Oracle's Parallel Server feature for this task?
Greets,
Harm

Hello,
I have a problem and I was searching through the Oracle documentation.
Then I mentioned the Oracle's Parallel Server (OPS) feature.
The problem I want to fix is the following:
I want to make a copy of a database. Subsequently I want to make changes to the copy of the original database. (possible changes could be extra columns).
Now I want to synchronize the data of both databases...
Is it possible to use Oracle's Parallel Server feature for this task?
Greets,
Harm

HACMP & Oracle's parallel server

Michelin Tire Corporation
At Michelin, we are trying to implement a failover
service object using Oracle 7.3 on RS6000 platform (AIX 4.1.4).
We understand that we need to use HACMP (Clustering) and
Oracle's parallel server. This way the DB Service objects
on two different computer nodes can access the same database.
Has anyone used this configuration? If so, have you had any
problems? and how well does it work?
We would appreciate any information on this subject.
Thanks in advance,
Thomas Sams

Tommy Sams wrote:
>
Michelin Tire Corporation
At Michelin, we are trying to implement a failover
service object using Oracle 7.3 on RS6000 platform (AIX 4.1.4).
We understand that we need to use HACMP (Clustering) and
Oracle's parallel server. This way the DB Service objects
on two different computer nodes can access the same database.
Has anyone used this configuration? If so, have you had any problems?
and how well does it work?
We would appreciate any information on this subject.
Thanks in advance,
Thomas SamsAt CSI, we have planned to use HACMP with Forte' failover to provide a
high availability architecture for one of our customer.
There are a lot of stuff to consider, some related to hacmp
configuration, some to forte' mechanisms.
In particular we should use HACMP for managing RDBMS backup and Forte'
capabilities to deal with partitions/envs/nodemgrs failover. We have not
take into account Oracle's parallel server at the moment ( althought it
could be a good solution ) because we don't really need to access oracle
from 2 different nodes at the same time, but "just" to have a "realtime"
dbms backup in case of primary server fault.
The architecure we choosen is based on tre AIX server ( 1 application
server, 1 main dbms server, 1 backup server ( oracle failover, envs
failover).
We have started testing it using forte 2.0.h, but we realized that a
more complete functionality will be offered using 3.0 KEEP_ALIVE
features. So I could give you more feedback in the near future.
What type of solution have you in mind ?
Regards
Fabrizio Barbero
Barbero Fabrizio
CSI-PIEMONTE
Cso Unione Sovietica 216
10134 Torino ITALY
tel: +39 11 3168515
fax: +39 11 3168212
e-mail: [email protected]

Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? Difference between Enterprise and SE?

We’re seeing the following issue: sql - Can Oracle be forced to use the spatial index for sdo_filter in combination with an or clause? - Stack Overflow (posted by a colleague of mine) and are curious to know if this behaviour is due to a difference between standard and enterprise, or could we doing something else wrong in our DB config.?
We have also reproduced the issue on the following stacks:
Oracle SE One 11.2.0.3 (with Spatial enabled)
Redhat Linux 2.6.32-358.6.2.el6.x86_64 #1 SMP Thu May 16 20:59:36 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
11.2.0.3.0 Standard Edition and 11.2.0.4.0 Standard Edition (both with Spatial enabled)
Microsoft Windows Server 2003R2 Standard x64 Edition
However, the SQL works fine if we try it on Oracle 11.2.0.3.0 *Enterprise* Edition.
Any help or advice would be much appreciated.
Kindest Regards,
Kevin

In my experience sdo_filter ALWAYS uses the spatial index, so that's not the problem. Since you did not provide the explain plans, we can't say for sure but I think yhu is right: Standard Edition can't use the bitmap operations, and thus it'll take longer to combine the results of the two queries (because the optimizer will surely split this OR up in two parts, then combine them).
BTW: when asking questions about queries here, it would be nice if you posted the queries here as well, so that we do not have to check another website in order to see what you are doing. Plus it will probably get you more answers, because not everyone can be bothered to click on that link. It would also have been nice if you had posted your own answer on the other post here as well, because my recommendation would have been to use union all - but since you already found that out for yourself my recommendation would have been a little late.

Help !! I can't connect to server using connection manager

Hello :
i hava three machine,i use connection manager on Oracle 8.1.7
i can't connect to server using connection manager
1.lsnrctl start (Server)
2.svmrgrl (Server)
start (Server)
3.cmctl start (Middle tier)
4.sqlplus scott/tiger@test (client)
ORA-12564
Please help my!
---- CLIENT (sqlnet.ora)
USE_CMAN = TRUE
NAMES.DIRECTORY_PATH= (TNSNAMES)
---- CLIENT (tnsname.ora)
(DESCRIPTION =
(SOURCE_ROUTE = YES)
(ADDRESS = (PROTOCOL = TCP)(HOST = orcl-middler)(PORT = 1610))
(ADDRESS = (PROTOCOL = TCP)(HOST = orcl-db)(PORT = 1521))
(CONNECT_DATA =
(SID = bigbear)
---- MIDDLE TIER(cman.ora)
CMAN = (ADDRESS_LIST =
(ADDRESS =
(PROTOCOL = TCP)
(HOST = orcl-middler)
(PORT = 1610)
---- SERVER (listener.ora)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = orcl-db)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(ORACLE_HOME = /u01/app/oracle/product/8.1.7)
(SID_NAME = bigbear)
---- SERVER (init.ora)
MTS_DISPATCHERS = "(PROTOCOL = TCP)(DISPATCHERS=10)(MULTIPLE=ON)"
MTS_MAX_DISPATCHERS=20
MTS_MAX_SERVERS = 30
MTS_SERVERS = 10
MTS_SERVICE = bigbear
db_name = "bigbear"
db_domain = intumit.com
instance_name = bigbear
service_names = bigbear.intumit.com

midder tier must config hosts
because dispatcher have listener information
midder tier must know ipaddress
Ex. on midder tier
/etc/hosts
192.168.10.1 orcl-middler
from client to server it's ok

Oracle to SQL Server using JDBC

I would like to connect Oracle to SQL Server using JDBC and a java program in oracle using loadjava.
I cannot seem to get a SQL Server driver to work when loaded into Oracle using loadjava. Outside of oracle, they work just fine. Within oracle, I receive class not found exceptions.
PLEASE HELP!!!!!!!

I would like to connect Oracle to SQL Server using JDBC and a java program in oracle using loadjava.
I cannot seem to get a SQL Server driver to work when loaded into Oracle using loadjava. Outside of oracle, they work just fine. Within oracle, I receive class not found exceptions.
PLEASE HELP!!!!!!!

Can oracle inventory forecasting be used without order management??

Can someone please tell me how oracle forecasts are used.
Like i have configured and tested it but i want to know how it calculates forecasting and whether it can be used without order management module or not
when i define item comsumption entries and gvie a quantity in current, the ending date and then see bucketed, it shows same forecasted quantity for all periods that i entered in item comsumption entries
I dont understand this
And why is forecasting necessary for reorder point planning
Some please explain
Thanks
Emm

Query: "can oracle inventory forecasting be used without order management?"
Yes, in that case it can accept manually entered forecasts or forecast generated from Inventory demand history (say Miscellaneous issue, Inter-org Transfer, Issue to WIP) excluding Sales Order issues (as OM is not included).
For remaining questions you can refer to my earlier post under the following thread. Please refer to the bottom section (thread was started with a different subject)
serial attribute and org attribute problems with item master
If your questions are answered you can mark the thread as appropriate.
Thanks
- Supro

Can't start weblogic server using Ant

Hello,
I can't start the WL Portal after installation.
On a Windows 2000 Server SP2 : - I installed WebLogic Server 6.1 SP2 with the examples
- I installed WebLogic Portal 4.0 SP2 (giving the same password as during the WL
Server installation) -I installed EBCC 4.0 SP2 .
I updated the license with UpdateLicense.cmd
Now If I run - run the default WL server, both from the menu and as a service -
enter the WL server console (on port 7001) - run the EBCC .
When I try to start the WL Portal, from the program menu I am able to start the
WP server properly , But I I try to start it from an ant wlrun then I get the error
an IllegalAccessError (with the same password I gave during installation and I use
to enter the server console): The WebLogic Server did not start up properly. Exception
raised: java.lang.IllegalAccessError: try to access method weblogic/management/internal/Helper.preloadMBeanInfos()V
from class weblogic/management/Admin at weblogic.management.Admin.initialize(Admin.java:210)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:362) at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:202)
at weblogic.Server.main(Server.java:35) Reason: Fatal initialization exception
Any idea ?

Hi VG,
thank u a lot for ur answer. But there are no files at the Admin Server boot.properties path.
and at the BI Server boot.properties path there is no security folder. Do u have any idea why i cant found anything at this directions ? Also I tried again the command "./startWeblogic.sh " and get a new error message which I post below. I am rlly worry about this. Is there maybe a way to reset the OBIEE and undo all changes ?
<Oct 30, 2013 10:00:47 AM CET> <Warning> <EJB> <BEA-010001> <While deploying EJB 'AsyncAdminService_AsyncRequestProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncRequestProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Oct 30, 2013 10:00:47 AM CET> <Warning> <EJB> <BEA-010001> <While deploying EJB 'AsyncAdminService_AsyncResponseProcessorMDB', class oracle.j2ee.ws.server.jaxws.AsyncResponseProcessorMDB was loaded from the system classpath. As a result, this class cannot be reloaded while the server is running. To prevent this behavior in the future, make sure the class is not located in the server classpath.>
<Oct 30, 2013 10:00:48 AM CET> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application em is not versioned.>
^C<Oct 30, 2013 10:39:50 AM CET> <Notice> <WebLogicServer> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>
<Oct 30, 2013 10:39:50 AM CET> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>
<Oct 30, 2013 10:39:50 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>

Issue while importing table from oracle to sql server using import and export wizard

Hi All,
I am trying to populate oracle table to sql server using import export wizard and i am getting the below error.the table is allready present in the database but still it throwing error like table doesn't exists.
Could not connect source component.
Error 0xc0202009: Source - JOB_ACTION_HISTORY [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
Error 0xc02020e8: Source - JOB_ACTION_HISTORY [1]: Opening a rowset for ""FLXUSER"."JOB_ACTION_HISTORY"" failed. Check that the object exists in the database.
(SQL Server Import and Export Wizard)
Kindly help me out
Thanks in advance

Hi Snehasis,
Please check whether the table name in the Oracle database has lower case letters. The table name should be exactly correct.
In addition, the issue might be related to the Oracle driver. What provider/driver do you use? If you use Microsoft OLE DB Provider for Oracle, you can try the
Oracle OLE DB Provider. If you use Enterprise or Developer edition of SSIS 2008 or higher, you can also try the
Microsoft Connectors for Oracle by Attunity. The Oracle OLE DB Provider and Microsoft Connectors for Oracle are proved to have better performance.
Regards,
Mike Yin
TechNet Community Support

Can Oracle Express Edition be used for Internet Web Projects?

Hi,
If we have a simple WWW application accessible from internet via WEB server and Web server uses Oracle Express Edition as a "data storage", can Oracle XE be used without violating license (XE limitations)?
Thank you!

Don't see why not, although a quote from the Oracle Technology Network Developer License Terms for Oracle Database 11g Express Edition page at the License Rights section, "developing, prototyping and running your applications for your own internal data processing operation..." so that might be leaning into a bit of a grey area. A bit.
But with something available on the web you'll want to be sure to stay up to date with security patches- and unfortunately XE can not be patched. Just because something can be done, and even works for its intended purpose, doesn't necessarily mean that it is a "good thing to do".
Nothing wrong with trying something out for learning and figuring out how things work- apex is a nifty development platform, although I've not kept up with the details of the last couple of versions. Too many other things on the "got to learn this, got to do that" list(s).

Can't connect to server using hostname

I have an Apache server running on my MacBook Pro and am able to connect to it's website using localhost just fine. I have 3 clients on the internal LAN that I am testing connection with: 2 MacBook Pros and 1 iPhone. The iPhone and one of the other computers can connect to the server's website using the hostname i.e. http://hostname/ however the last MBPro cannot connect with hostname. It can only connect using ip address. Any suggestions on what's why the last computer can't resolve the hostname?
I'm using safari as my browser and all 3 MBPros are running 10.6.7.

When you say hostname, do you mean hostname.local? or is it a FQDNS?
if your talking about a local host name did you try adding the .local to the end?
If it's FQDNS:
Have you tried Resetting the DNS cache? You can do so by opening terminal in utilites and typing "sudo dscacheutil -flushcache"
If that doesn't fix the issue, have you checked to make sure the DNS on the effected computer is the same as the other computers?

Can connect to the server using VPN, but cannot pull up the shared drives

I can connect to the server at work using PPTP VPN. I can ssh to the server once I VPN'd in. I cannot, however pull up any of the shared drives using K. It just says that it is connecting, but nothing happens. When I disconnect the VPN, the user name and password box pops up. The only way to get rid of it is to click cancel. Nothing changed on the server since the last time I logged in. Also, when I am VPN'd in, I cannot use the Server Admin or Workgroup Manager. Any assistance is greatly appreciated.
P.S. The server is the MacMini and the client is the MacBook, running 10.5.7 software.

This is strange, your setup is the same as mine :P
Anyways, I also have a problem like this.
I connect to VPN fine, but tools that need to access the net seem to take a very long time to open. Its as if my Client Information inside the server isn't being sent to the client correctly.
It takes atleast two minutes after connecting to the VPN for iChat to connect and work again, and tools like Server Admin seem not to work at all.

Can I install Lion Server using ARD?

I've got a 2008 xserve I'd like to update to Lion Server (from 10.6.8 server). Can I successfully install it using ARD or is it going to hang at some point without ARD access waiting for some kind of input to proceed with the installation?
Thanks
Eric

Yes. You need to buy Leon and Server via AppStore. Think twice before click [buy app]... read posts on this group.

I have lost my I phone, and I want to disable it. I couldn't find it through "I cloud" or "find my iphone"!! Can I disable it by using the serial No. or IMEI ? How?

I have lost my I phone, and I want to disable it.
I couldn't find it through "I cloud" or "find my iphone"!!
Can I disable my lost I phone by using the serial No. or IMEI ? How?

The only way to locate/disable/erase any lost/stolen iPhone/iPod Touch is through Find My Phone or a similar app. However, this requires that Find My Phone be setup/activated, on your phone, before it was lost/stolen. You would then login at iCloud.com & try to locate it. This requires the phone be turned on & have an Internet connection. There is no other way to locate a lost/stolen iPhone. Apple can't/won't help you, nor will your carrier. Report the loss to the Police, your carrier & Insurance company. Change all of your passwords.
If your carrier offers Blacklisting & they Blacklist the phone, it will be unusable as a phone.
If locked with a passcode, all a thief or whoever finds it has to do is force the phone into recovery mode & restore it. While this deletes all data on the phone, it also removes the passcode so the phone can then be used as a phone or touch.

Can Oracle materialized view be used as crystal report datasource

Hi,
Can we use materialized view created in Orace 10g database as the data source of crystal reports.
I'm using Crystal reports Server 2008 V1 version. I'm unable to find the materialized view under my data connection. I can see only tables, static views and stored procedures.
Is there a way by which I can run my reports against a materialized view created in Oracle.
Thanks
Thomas EL

Hi Thomas,
Rather than doing all of this work around to access multiple databases/servers why not create a stored procedure to do all of this for you? Search the notes area for samples on how/what CR requires to use a SP in Oracle.
Advantages is this is done all server side and CR simply waits for the data to be returned. Even if you are using a BVM or connecting directly to the SP, both cases are server side. Database servers are much more efficient and optimized to run queries and filtering data. CR has to do the filtering on it's second pass and that causes performance delays.
Thank you
Don

Can Oracle 8i Parallel server use ICC on OpenVMS 7.2-1 ? How ?

Similar Messages

Maybe you are looking for