Can Oracle and Sybase Coexist on Sun Box ??

Hello Everybody,
I an trying to find out if Oracle and Sybase can coexist on same Sun Solaris box ??.
I would really appreciate your help.
Thanks,

Definitely. Just be sure to set the kernel paramaters that are needed for each database. (ulimit for Sybase, ISM for Oracle (semaphores and shared memory)). Also be sure that your system has enough memory for the Oracle SGI and the Sybase caches, and that there is still enough for the OS to operate (which is dependent on platform, CPU count, and OS version).
Good Luck,
Mike Phillips

Similar Messages

  • URGENT!!! Can ATA and SCSI coexist?

    hello fellas!
    my case is similar of the post "Can SCSI and ATA coexist?', but with some differences:
    I own a G4 Dual 500–MHz PowerPC G4, 40Gb ATA + 80GB ATA. (http://support.apple.com/specs/powermac/PowerMac_G4_GigabitEthernet.html)
    now I've installed a PCI SCSI card to connect tree more SCSI HDs: two barracuda 18Gb and one quantum 36Gb)
    my G4 only reads SCSI drives when I disconnect ATA tape from motherbard...
    when I plug ATA to motherboard again, neither SCSI mount on desktop, nor system profile shows it as a device, even when I start Hard Drive Update 1.app...
    I've read all manuals from apple, jumped all SCSI HDs, but for some reason, it doesn't work at all!
    so, the question, again, is Can ATA and SCSI coexist?
    does anyone knows how to config it??
    thanks in advance!
    b
    G4 Dual 500–MHz PowerPC G4   Mac OS X (10.4.8)   [email protected]

    answering:
    - as my primary language is portuguese, i didn't understand when you said 'booting off the OS X disk'. do you mean eject it in the disk utility?
    - I have so many drives because e sold another G4 that used those drives atached with the pci card and I simply want to use it, because I'm short on cash... those drives are installed with OS 9.2 (the ATA ones are running OS 10.4.8)
    when you said one ATA and 2 SCSI, you mean that if I simply disconnect the slave ATA and one of the SCSI it may works?
    thanks again!
    b

  • 9i and 10g Listener in  SUN box  How do i stop .while applying the patch.

    Hi,
    Sun box running - I am having
    1. oracle_home 9i Version (database's are running)
    My team installed 10g Version 10.2.0.1 in Oralce_home1 there were no database are running in 10g, Now We plan to upgrade into 10.2.0.4 in oracle_home1 while applying patch its asking to stop the listener process.
    Is it mean to stop 91 listener or 10g listener?
    I had checked the running process in my server using grep -ef
    it show all process 9i database's and i find this home1/oracle/product/1020/bin tnslsnr LISTERNER -Inherit. How do i stop ? after applying the patch how do i start?
    Is it require down time?
    Thanks in advance.
    Rajas

    Hi
    When i check the lsnrctl status it is showing the error , How do i resolve it?
    In sun box:
    /home1/oracle/pro/920/bin -9i is running
    /home1/oracle/pro/1020/bin 10g is running
    When i check the lsnrctl status the above oracle home it through error
    Connecting to (ADDRESS=(PROTOCOL=TCP)(PORT=1521))
    TNS-12618: TNS:versions are incompatible
    Thanks in advance
    Rajas.
    Edited by: Rajas on Sep 23, 2008 8:36 PM

  • Can Struts and JSF coexist?

    I have a Struts based application and now I want to build an additional module on top of that using pure JSF. My question is, can Struts and JSF co-exist in the same application? If yes, what are the cons of that approach? What are the places I need to tweak in the configuration files so that they work together?
    thanks,

    Hi,
    Yes they can coexist. Actually that's the approach recommended by Craig McClanahan. I have developed a full enterprise application (80% completed) which uses JSF in front and Struts in the back using Struts-Faces integration library (developed by Apache).
    So far I haven't faced any major issues with this approach. However, I haven't try using Struts validator on JSF objects.
    Read the article below on how to integrate JSF w/ Struts.
    http://www.oracle.com/technology/pub/articles/masterj2ee/j2ee_wk8.html

  • Can JRE and MVM Coexist???

    In an IE6 environment, I realize I can install both the MVM from MS and the JRE from Sun, and that I can toggle the use of the JRE within IE's advanced settings, but...
    Can they both be used by different apps at the same time? I've got a PDM web app that needs the JRE, and a web-based colaboration tool that needs the MVM...
    Thanks for any input.
    JonnyB
    [email protected]

    By using the <EMBED> tag instead of <APPLET>, you can force the browser to detect the JRE even if MSJVM is the default. The JDK incudes a utility (HtmlConverter) that will convert your <APPLET> statements for you.
    Downsides (there's always a downside, isn't there?) are that I don't think <EMBED> is supported by all OS/browser combinations in the same way, and many corporate firewalls block embedded content, so you gotta be careful where you use it.

  • Can SCSI and ATA coexist?

    My Mac G4 450 came with a 36 GB SCSI drive, I purchased a 160 GB Ultra ATA drive and a Ultra ATA ribbon cable. I assumed all I had to do was install the drive and connect the cable then run disk utility. No such luck. The drive is a seagate barracuda plus 8mb ultraATA/100. I've tried all four jumper positions, and since the cable is a dual drive I tried both primary and secondary positions. At each restart the screen shows only a folder flashing between a mac face and a question mark. Disconnecting power at the new drive, and or disconnecting the ribbon at the new drive produces the same results. The only way to reboot is to disconnect the ribbon cable from the motherboard. When that cable is connected it can't find a system. Any ideas? P.S. I recently installed a sonnet 1.2GHZ upgrade about 2-months ago but no problems.

    Did you zap the pram after you installed the new HD? Always a good idea after you make any change to the hardware.
    See if that helps.
    If not, error code -20 indicates an I/O error. Error codes are here.
    An I/O error would explain the failed format.
    On your G4, you want that either as master or slave. Probably a master and stuck to the end of the cable. Don't know about the current Barracudas, but for a lot of them you set the jumper on pins 7 and 8. Look at the top of the drive, they usually have a little diagram -- otherwise check Seagate's site. Slave has no jumpers.
    Next to the cable, what kind of cable did you buy? How long and how many wires? The ATA standard calls for 18" maximum, and I would suggest that don't go longer than that unless you're buying really good cables. Don't really need longer than that anyway from the mb to bay 3. Exceding 18" with suspect cables and you risk data corruption.
    You really need to make sure you get an ATA/66 compliant cable (which also covers ATA/100 and ATA/133), in that I mean make sure it has 80 wires. There are in reality on 40 connectors (40 wires used for connection), but the other 40 wires are used for sheilding. The ATA/66 (and /100 and /133) specs demand you use an 80 wires cable.
    If you can get a teflon cable, usually they're yellow. Seem be work a bit better. If you can't don't sweat it as long as it's 80 wires and no longer 18".
    Oh, by the way, since you're attaching the 160GB on the motherboard, bear in mind you won't get full formatted capacity. You have either a Sawtooth or a Gigabit Ethernet with an ATA/66 bus. Older ATA protocals like ATA/66 have a cap of 137GB (about 128GB formatted). So your 160GB will show only about 128GB after you get it formatted. (Only cure for that is to get an ATA-6, e.g. ATA/133 PCI card; should work fine though on the motherboard although giving you only 128GB.)
    But just to be clear I should be able to just connect the cable to the board and then to the drive, open disk utility erase and reformat right?Provided it's jumpered correctly, and zapping the pram at startup, the answer is yes. Something is amiss.
    SCSI and ATA can coexist. I've Seagate 15K SCSI Cheetah on an ATTO UL3D in my DA, with a 3 ATA Barracudas -- one on the motherboard, two on a Siig PCI ATA card.
    DA-Giga 2x1.33; Cube-Giga 1.3; PB 15" 1.33-Hitachi 100GB 7K100, Pioneer DVR-K05   Mac OS X (10.4)   Cheetah 15.3K, ATTO UL3D, Radeon 9600 Pro

  • Can smb and afp coexist on the same host?

    Greetings all!
    I've been using Macs and OSX for a year. And recently I bought another MBP so I am seriously considering Time Machine backups. I have a Linux home server running Ubuntu 12.04 and Samba and my previous MBP running Mountain Lion connects to it happily without any problem. But my trouble started when I tried to setup afp on the same box.
    I followed this post and this post and got the fake time capsule showing in Time Machine without any problem. But soon I found myself unable to connect to the old samba shares. The smb host now displays as a Time Capsule. If I click on that OSX will say 'failed to connect'.
    As I understand there are 2 pieces involved on the server side, avahi to broadcast the service info and netatalk to provide the service itself. It's a bit like nmbd and smbd in Samba. If this is true then it's somewhat understandable that OSX can not display the same host as 2 different types of services at the same time. So I stopped avahi-daemon and very soon the old Samba shares appeared again.
    I am able to connect to both services using command+k but I would rather have them running normally so that my wife will be able to use them without extra tech support. Can anyone tell me if what I said above is true and/or if there is a graceful way around this? If answer is no then I will have to create a virtual machine or nic alias just for time machine and I think it's quite a waste.
    Thanks!

    tristonej wrote:
    I don't quite understand why people buying non-Apple devices should not expect OSX to work with them
    Because Apple has no control over 3rd parties. They can do what they want. If Apple publishes a new authentication mechanism in 2002, the 3rd party doesn't have to implement it. That isn't Apple's fault. If they do get around to supporting it in 2009 and then some 4th party doesn't bother to use the 2009 code in 2011, Apple still can't do anything about that. If anyone else wants to advertise, and support, Time Machine compatibility, they are welcome to do that. They definitely have the advertising part down, the support, not so much.
    There is a time when apple only worked with apple but that aparently was not sustainable. And that's why now Apple is embracing smb
    Apple's goal is to choose the best solution for its customers. Sometimes that is a proprietary connection or protocol and sometimes it is something industry standard. In all cases, there has to be some cut off for testing and support. That is why Apple eventually stops supporting its own hardware and technologies at a certain point. That is also why Apple will support SMB as deployed by Microsoft but isn't going to waste much time on home-built Linux servers.
    (it's said even samba was used shortly on OSX, not quite sure) and allow users to install windows on macs. Even OSX itselt is based on FreeBSD and uses quite a lot of open source components.
    Apple uses a lot of open source software. Samba was one of those projects. Unfortunately, the people that made those products didn't want Apple using them so they changed the licensing to prohibit Apple (and pretty much only Apple) from using their source code. That is why some of the open source packages in OS X are stuck in a 2007 version. That is also why Apple abandonned Samba and wrote its own SMB implementation.
    OS X is not based on FreeBSD. It has a BSD-flavoured POSIX layer, but it is a distinct operating system at its core.
    IMHO there is no magic in throwing money at propiretary hardware/software or praying to Steve Jobs. If something is not working, it must be that there is a bug in the code or the design. And neither OSX nor Macs are built by God, which means they are bugged as other software/hardware.
    I'm confused. When did anyone say anything about praying to Steve Jobs or divine technology? You asked about using Linux as a Time Machine server. I suggested you avoid that if you value your data. I also asked why you would want to keep running Linux now that you have a Mac. A Mac can do anything Linux can do with a fraction of the effort.
    The answer is simple, Macs can not do what I want.
    Which is?
    Withe a standard mATX case I can have quite a few 3.5" drive bays while there is only one 2.5" in a Mac mini. And with Ubuntu/Debian, getting/updating the software or the system is quite easy, just one or a few lines of apt commands, not quite possible with OSX.
    That's certainly true. OS X updates itself without having to run any apt commands.
    If you must compile something from the source to get a Linux running then something must be seriously wrong.
    My thoughts exactly. But perhaps you didn't follow me entirely. Apt, yum, etc don't have everything one needs to setup something as fancy as, I don't know, a web server. While I did have to compile a number of things from source, I had to actually edit the source a couple of times as well.
    The best thing I love about Linux is openess. You can customize almost everything and change it whatever way you want. With Mac, for example the 2013 Retina MBP I just bought, it's not even possible to change the power button behavior, which is very annoying.
    Then why did you buy a Mac? That's no big secret. Some people like not have to configure everything just to get it running. I have other things to do than edit config files.
    Back to my original question. I think the problem is not quite with compatibility of Bonjor but rather whether OSX can show this or not. Imagine you have a smb share and afp share on the same host, with the same name, how would OSX display it? And which icon will OSX use to display the host? I can not think of the answer so if you know please tell me.
    OS X will just display it like it display any server. One of your links event has instructions on how to pick the icon you want to fake. If you are running both services then I am not sure which one it would try to connect with. Neither of your services are native, not matter how much they try to fake it. If you wanted a specific service you would have to manually use the correct protocol in Finder > Go > Connect to Server. However, bot of those links were posted before Mavericks. Obviously they don't work anymore. It's Linux. It's open. Right? So fix it and post it on your own blog. I do not know what modifications you would have to make to either Samba or Netatalk to make them work with Mavericks.
    If all you need is to allow your wife to connect to one specific protocol, then manually connect to that service, saving your password in the keychain, and create an alias by Command-option dragging the server to some other folder. Then, she can just double-click on the alias to connect to the network.
    Now, if you really want to be clever, you can setup an automount to that service instead. Then the server will be mounted and unmounted as needed.

  • Can SnS and DMM coexist in the new MXA server?

    Hi guys,
    i would like to confirm if a MXA server (SNSC220-WKG-K9) can support both a SnS 5.3.12 and DMM 5.3.12 on the same HW?
    Thanks

    Hi Elter,
    No, you still have two separate hardware devices running the SNS 5.3.12 and the DMM 5.3.12. I believe the DMM HW part is "DMMC220-SNS-K9". There are bundles including the two hardware devices anyway, your Cisco Account Team would be able to help you with the proper order configuration.
    Also note that the hardware will come with 5.3.10 release installed from factory and will need to be upgraded first to 5.3.11 and then to 5.3.12 if you need to run the latest release.
    I hope this helps,
    Marco

  • Hi reg Oracle 10g R2- Sun box

    Hi All,
    Oracle 9.2 is running sun box ,
    Is it possible to install 10g in different home?
    if Yes, How do i set path to create 10g database in this server?
    Thanks
    Rajas

    Raja
    Yes you can install in different home
    http://download.oracle.com/docs/cd/B10501_01/em.920/a96697/moh.htm#743462

  • Importing table dump from oracle into sybase

    I was wondering if anyone has ever imported a table dump from oracle into sybase. I just tried it and it didn't work. I used TOAD to create my table dump file but when i imprted it into sybase using bcp in i got the following error
    cs_convert: cslib user api layer: common library error: The result is truncated because the conversion/operation resulted in overflow.
    CSLIB Message: - L0/O0/S0/N36/1/0:

    If you are looking for a basic/standard way to exchange data between Oracle and Sybase, use the CSV format.
    It is trivial to write a generic SQL*Plus script for Oracle to extract data from a table (or a SELECT) and spool this into a properly formatted CSV file.
    It is also just as easy to use Sybase Bulk Copy utility to load that CSV file into Sybase.
    There are also alternative methods. One would be to use Oracle's Heterogeneous Services. You can define a database link in Oracle that connects, via ODBC, to Sybase. And using this database link you can push (insert) data into Sybase.

  • Can BW and R/3 Coexist?

    Hi,
    I apologize in advance if this is the wrong forum to ask this question.
    Can BW and SAP R/3 both reside on the same server/host but on seperate DB (Oracle)?  We are looking to migrate to new hardware but was not sure if both those applications can coexist.  Does SAP have a recommendation or stance on this? A note or faq would also be great.
    Thanks for your help.
    Newbie

    Hi Rick,
    It is possible to have the configuration you mention.
    It is not feasible to use a MCOD solution with you R/3 and BW system under Oracle. The oracle tuning for OLAP is different to the OLTP tuning.
    From an SAP perspective, I think it is your choice. My main concern is if you can isolate CPUs for each instance. Can BW consume all the CPUs and leave none for R/3 and vice versa. Most people implement partition of servers using their vendors solution for isolating memory and CPUs to avoid such issues and simplify administration(e.g. splitting a SUN server into domains).
    I do not believe you will find a SAP note on this as it a hardware solution.
    I hope this helps,
    Mike.

  • I want to send notifications to outside(i,e mail box) from oracle, and users will approve the notification from email

    Hi
    I have a client required to send notifications to outside email box, and also user will approve this notification through email.(i,e not logged into oracle and approve it) in 11i instance.
    i need to send mail from po department to finance department
    once finance department approves , then mail back to po department that your notificaiton approved.
    from address:=[email protected]
    to address:=[email protected]
    as part of this we did IMAP set up
    and used the following code. and getting the notifications from Oracle to my mail box.
    my main issue is when user approves the wf notifications, it is not showing my specified email address in the attribute #WFM_REPLYTO, always it is showing the IMAP set up wfdev address
    what is the value i need to use for this #WFM_REPLYTO
    eventhough i am sending the to_address email id to the following attribute(wf_engine.setitemattrtext), the workflow approval not working for that email id.
    only if i am using the '[email protected]' in the imap set up, then only approval is working.
    how can i override this to_email address value([email protected]) to my desired email address?
    wf_engine.setitemattrtext (itemtype => l_item_type,
    itemkey => l_item_key,
    aname => '#WFM_REPLYTO', -- to_ address
    avalue => '[email protected]' -- [email protected]
    if any body having some sample code related to this please share on this.
    Thanks
    sam

    Sam,
    Can you find any errors in the Workflow log file?
    Please review the following docs.
    Setting Different Values For Attributes #WFM_FROM & #WFM_REPLYTO Does Not Happen Or Results In SAXParseException (Doc ID 1455191.1)
    How To Change The Default From and Reply To Email Address For Workflow Email Notifications (Doc ID 760477.1)
    Thanks,
    Hussein

  • Does Oracle have Extended Stored Procedure like SQL Server and Sybase?

    Hi, i am new to Oracle. I want to know if...
    Does Oracle have Extended Stored Procedure like SQL Server and Sybase?
    If it does not have, then how can i call outside program written in C or JAVA from the Database stored procedure or trigger?

    refer to this link on external procedures
    http://download-west.oracle.com/docs/cd/A87860_01/doc/server.817/a76956/manproc.htm#11064

  • Oracle Workflow Server in a SUN machine; and the Oracle

    Hi All
    I have installed Oracle Workflow Server in a SUN machine; and the Oracle
    Workflow Client (Builder) in a WIN2000 machine.
    In the SUN machine, I already had installed Oracle9i and OMS (Oracle
    Management Server) version 9.2.0.1.0.
    In the WINDOWS 2000 machine, I already had installed the Oracle9i
    Client and the OWB (Oracle Warehouse Builder) version 9.0.3.35.0. Workflow
    Builder
    was installed together with Oracle Client components.
    I have a OWB (Oracle Warehouse Builder) project, and I deploy and schedule
    JOBS in OEM.
    Now I need Oracle Workflow in order to better ordering, manage and schedule
    that jobs.
    I'm reading the following documentation:
    Oracle Workflow Guide (Release 2.6.2)
    http://www.csis.gvsu.edu/GeneralInfo/Oracle/workflow.920/a95265.pdf But I think Oracle Workflow is very complex to learn quickly.
    My OWB Project has several mappings that load tables in a Data Warehouse.
    When I deploy these mappings one by one, in OEM, I can execute them in OEM
    and they work well.
    But when I use the Workflow Deployment Wizard, I create a new Workflow
    Project (Item type and Process).
    But I can't Launch this process. I go to Launch Process in Workflow page
    (http://:/pls//) but when I iniciate the project,
    it stops in the OWB Standard Begin Function. It does not go ahead.
    Well, when I use the Workflow Deployment Wizard inside OWB, it generates
    jobs that can
    be viewed inside OEM (Oracle Enterprise Manager) too. But when I submit
    these jobs, I can't get success too.
    Can somebody help me? May you guide me in order to solve my problem, or send
    me some
    documents or links about workflow, and it's integration with OWB and OEM?
    Best regards

    I think this might be more of an OWB question, and how OWB uses workflow, I have sent an email internally to try and get someone to responsd. You should also consider contacting Oracle Support if you are having these kinds of problems.
    Hi All
    I have installed Oracle Workflow Server in a SUN machine; and the Oracle
    Workflow Client (Builder) in a WIN2000 machine.
    In the SUN machine, I already had installed Oracle9i and OMS (Oracle
    Management Server) version 9.2.0.1.0.
    In the WINDOWS 2000 machine, I already had installed the Oracle9i
    Client and the OWB (Oracle Warehouse Builder) version 9.0.3.35.0. Workflow
    Builder
    was installed together with Oracle Client components.
    I have a OWB (Oracle Warehouse Builder) project, and I deploy and schedule
    JOBS in OEM.
    Now I need Oracle Workflow in order to better ordering, manage and schedule
    that jobs.
    I'm reading the following documentation:
    Oracle Workflow Guide (Release 2.6.2)
    http://www.csis.gvsu.edu/GeneralInfo/Oracle/workflow.920/a95265.pdf But I think Oracle Workflow is very complex to learn quickly.
    My OWB Project has several mappings that load tables in a Data Warehouse.
    When I deploy these mappings one by one, in OEM, I can execute them in OEM
    and they work well.
    But when I use the Workflow Deployment Wizard, I create a new Workflow
    Project (Item type and Process).
    But I can't Launch this process. I go to Launch Process in Workflow page
    (http://:/pls//) but when I iniciate the project,
    it stops in the OWB Standard Begin Function. It does not go ahead.
    Well, when I use the Workflow Deployment Wizard inside OWB, it generates
    jobs that can
    be viewed inside OEM (Oracle Enterprise Manager) too. But when I submit
    these jobs, I can't get success too.
    Can somebody help me? May you guide me in order to solve my problem, or send
    me some
    documents or links about workflow, and it's integration with OWB and OEM?
    Best regards

  • Can Oracle9i and Oracle 9iAS co-exist on same machine.

    I was wondering if Oracle9i and Oracle 9iAS can co-exist on same machine. I like to play around with 9iAS and I already have 9i database up and running on this one box.
    Thanks.

    What issue are you having? You can install both versions of Forms into separate homes. You then have two versions of your Forms application, in different directories. Then your FORMS60_PATH points to your Forms 6i forms, and your FORMS90_PATH points to your Oracle9i Forms forms. There is no conflict.
    Regards,
    Robin Zimmermann
    Forms Product Management

Maybe you are looking for