Can Oracle Portal be an OpenID RP?

Is it possible to configure Oracle portal to be a Relying Party to an OpenID authentication server?
Are there any directions for this?

There are many ways to do this.. Have you tried checking the Portal Developer's Kit and other resources below:
[list]
[*]Portal PDK Online - January 2001 Edition. Check in the PDK for links about web portlets, url portlets portlets implemented via dynamic services, and more.. The Portal PDK itself may be downloaded from here.
[*]How to build a URL Portlet
[*]The Oracle Portal Studio - Test drive the web portlets that you write here..
[list]

Similar Messages

  • Can Oracle Portal work without Oracle HTTP Server ?.

    Hi,
    We are developing on Oracle Portal 10.1.4.
    We are trying to use IPlanet Web Server instead of Oracle HTTP server. In such a case can Portal run with IPlanet Web server. alone ?.
    Can we eliminate Oracle HTTP Server altogether ?.
    Thanks and Regards,
    Panai.

    Third party HTTP Servers can be used with the OracleAS Proxy Plug-in. I have not done any tests with them however. The documentation states that it will enable you to integrate Sun ONE Web Server Enterprise Edition on UNIX and Windows systems, or the Microsoft Internet Information Server (IIS) on Windows systems.
    Oracle Portal is tightly integrated with Oracle Web Cache. This might limit the usability of the OracleAS Proxy plugin.
    More info is available in the documentation :
    http://download-uk.oracle.com/docs/cd/B32110_01/web.1013/b28948/proxy.htm#sthref1166

  • How can Oracle Portal 11g improve ROI for a utility company

    I want to prepare a presentation regarding Oracle Portal 11g for a group of senior management in my company which sells electricity for commercial building. So i need to know from where i can find related papers that gives some practical examples for how implementing an Oracle Portal 11g can reduce operational costs and can improve ROI over time. So that if the company buy Oracle Portal 11g which costs for example X dollars then the company can cover this cost from reducing the operational costs in few years.
    Appreciate a lot any help and support.
    Best Regards
    John.

    The supported way to install Oracle Portal is available in Note [url https://support.oracle.com/epmos/faces/DocContentDisplay?id=1436807.1]1436807.1, 'How to Perform a New Installation of Oracle Portal 11g With Oracle Access Management 11g as Single Sign-On Solution ?'.
    A few remarks about this note :
    <li>The note mentions FMW 11.1.1.6 - FMW 11.1.1.7 is out already and should be used instead
    <li> The note mentions OAM 11.1.1.5 - use OAM 11.1.2 instead as it will allow you to consume a future patch for DAS support
    Thanks,
    EJ

  • Can Oracle Portal read data from an access DB and loaded it an Oracle DB?

    Hi All.
    Does Oracle Portal provides a portlet to read data from an access db so that i can transfer it to my Oracle DB?.
    I believe Application Express does that .... Any portlet maybe ...?
    Regards, Luis ...!

    There are portlets that read from a DB to make reports, you can try to create a form portlet so you can make inputs to the database, no buil-in like you wish, has to be done manually.
    greetings.

  • Can Oracle Portal use IDM OID rather than portal OID

    Hi,
    Is it possible to use OID of IDM during Oracle portal installation?
    If we use the OID of IDM should we have to install the SSO component in the portal infra?
    How does the process flow work when portal is integrated with IDM OID?
    Thanks in Advance.
    Jay.

    <div>In order to use Oracle Portal, you will indeed need OiD. Not only does Oracle Portal use OiD for its users and groups, it also stores metadata for the application server.</div>
    <div>Your question about synchronization of user and group information is not easily answered. Pending on your requirements there are lots of possible solutions. I'd recommend to check the OiD integration guide for possible solutions.</div>

  • Oracle Portal 11 and WSRP 2.0 portlets

    Hello.
    I have found Oracle Portal 11g can't consume WSRP 2.0 portlets.
    I create and deploy ADF Faces Portlet into Weblogic Server
    as shown in http://download.oracle.com/docs/cd/E12839_01/portal.1111/e10238/pdg_java_intro.htm#CHDFDDBG.
    I register WSRP 1.0 producer using Jdeveloper 11g. Then I register that producer using Portal 11g. When I add portlet from the
    producer into portal page it's possible to view the portlet.
    But when I register WSRP 2.0 producer in JDeveloper 11g and then register that producer in Portal 11g, and then add same portlet
    into portal page it's impossible to view the portlet.
    Tell me please. Can Oracle Portal 11g consume WSRP 2.0 portlets or not?
    Many thanks, Andrew

    Oracle Portal 11g WSRP 2.0 Sample Portlets
    [http://www.oracle.com/technology/products/webcenter/release11_demos.html#wiki_blog_disc_samples|http://www.oracle.com/technology/products/webcenter/release11_demos.html#wiki_blog_disc_samples]

  • Oracle portal use in different application servers

    Instead of Oracle 9iAS, can Oracle Portal run on other Application Server?

    Hello,
    When you using JDBC resource in a J2EE container you should use a DataSource that will be an abstraction layer to your code.
    Are you doing that?
    This will simplify the integration to the development, test and production machines.
    You can take look the the data source how-to on OTN.
    Regards
    Tugdual Grall

  • How can I uninstall a damaged installation of Fusion - PFRD 11.1.1.6.0 - Oracle Portal, Forms, Reports and Discoverer

    Hello,
    I am upgrading EBS 11i to 12i, Discoverer 4 to 11. After completing ebs installation and upgrade successfully, I am now working on the Oracle Fusion piece of the upgrade.
    I have installed
    1. JDK
    2. Repository Creation Utility - RCU (schema)
    3. Weblogic - WLS 10.3.6
    4. Oracle Fusion - Discoverer 11g Release 1 Patchset 1 11.1.1.2.0 PFRD
    5. Oracle Portal, Forms, Reports and Discoverer 11g Patchset 11.1.1.6.0 - Patchset 13517084
    6. Executed config.sh and it failed with but continued.
         During the Configuration of Oracle Fusion with config.sh there was failure at with "fails at creating data sources" and accidentally proceeded and all seem to go well until after shutting down the servers when Weblogic Managed Server is unable to start.
    The start log indicated: "weblogic.store.PersistentStoreFatalException: [Store:280105]The persistent file store "_WLS_WLS_DISCO" cannot open file _WLS_WLS_DISCO000000.DAT." and I have been unable to find a solution for this error?
    See log file error at https://dl.dropboxusercontent.com/u/15497130/oracle/ebs11/startManagedWebLogic.sh_nohup.out
    If re-installation is my only option, then what are the steps to uninstall, and which components do I have to uninstall given that I had upgraded all the schemas involved?
    Mathias

    Hey,
    You can always change the JDBC datasources in the Weblogic admin console . but have you recorded what is the specific error you got during the datasources creation .
    I prefer...create a new user , give him sysdba privillages . Start RCU and create the DEV_DISCOVERER , DEV_DISCOVERER_PS schemas (prefix is your choice)
    The Admin server will start . so go to admin console .
    click services -> Data Sources
    Check the data sources you have . edit each datasource and update the connection pool information .
    after this you can start the Managed server WLS_DISCO
    i believe this will solve this .........
    if you still get issue again . you can try the link Using the WebLogic Persistent Store
    Thanks
    Naga

  • Can no longer connect to iProjects using Oracle Portal

    From one day to the other, I can no longer connect to iProjects using Oracle Portal. It gives the message "Cannot connect to iprojects-files.oracle.com" because the username or password is incorrect. I can connect using the web interface though, using the same username and password. I type my username in uppercase and password in lowercase. Tried other combinations (upper and lower) as well, to no avail.
    Any Idea?
    Jan Kettenis

    JEM24 , your suggestion is included in:
    - iOS: Troubleshooting Wi-Fi networks and connections
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    JEM24 wrote:
    Sorry Mindi, also have your tried rebooting your router? That's all. Try that before you attempt to Restore. Cheers.

  • Where can I download oracle portal 10.1.4.2 patch

    Dear All,
    I have installed ORacle Portal 10.1.2.0.2 and patched with version 10.1.4.
    I would like to get patchset 10.1.4.2 and do the patching. Can someone point out the location from where I can download the patch set.
    Best Regards,
    Bala

    On My Oracle Support/Metalink, look for
    Patch No: 5983622
    Oracle® Application Server and Oracle Developer Suite Patch Set
    10g Release 2 (10.1.2) Patch Set 3 (10.1.2.3.0)

  • URGENT HELP- Can't install Oracle Portal on Windows 2000

    I am trying to install Oracle Portal as part of installation of Oracle 9iAS v1.0.2.2.2a on Windows 2000 and I get this message from the OPCA Installation Log:
    STEP 8 : Installing WWV layer Components
    INSTALL_ACTION:installWWV() : ..\..\bin\sqlplus portal30/portal30@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=mercury)(PORT=1521)))(CONNECT_DATA=(SID=pdb))) @..\..\portal30\admin\plsql\wwv\wwvinst.sql portal30 USERS TEMP wvinswwv.log USERS USERS portal30_NULL portal30_sso portal30_DEMO
    INSTALL_ACTION:installWWV() : ..\..\bin\sqlplus portal30/portal30@(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=mercury)(PORT=1521)))(CONNECT_DATA=(SID=pdb))) @..\..\portal30\admin\plsql\wwv\wwvinsty.sql portal30 USERS TEMP wvinswwv.log USERS USERS portal30_NULL portal30_sso portal30_DEMO
    ORA-00600: internal error code, arguments: [15456], [WWA_API_MODULE], [13],
    Errors encountered in the Install process. Installation Aborted.
    I am using an Oracle 8i database for the installation on the same machine. Can anyone help please?
    Thanks,
    -Ashok Manian

    Thanks for the reply Rohini.
    The SYS password is change_on_install and SYSTEM password is manager. It still causes the same problem. The database I am using is an Oracle 8i database which is automatically created while installing Oracle 9iAS.
    I also tried to install Oracle Portal on an Oracle 9i Database on the same machine and this comes out with a different error. It tells me the SHARED_POOL_SIZE is less than 31457280 whereas as I checked through SQL*Plus its actually much more than that!
    Can you please help?
    Thanks,
    -Ashok Manian

  • How can I send files by FTP with Oracle Portal?

    I want to send some file by FTP.
    How can I send files by FTP with Oracle Portal?
    Any ideas?

    Enrique,
    Are you trying to transfer more content from remote locations to expose as items within a portal page? By itself, the Oracle Portal runs within the context of the database so I'm not sure how FTP at the OS level will help. However, if you're attempting to transfer files from a remote PC to upload within the Portal, here are a couple of suggestions.
    Option 1:
    A. Create a portal page.
    B. Convert a region to Items.
    C. When you're challenged to upload a file from the local OS, ensure you've a drive mapped to your remote location and pick the file to upload into the Oracle9iAS Portal.
    Option 2:
    Alternatively, the Oracle9iAS Portal 9.0.2 supports the WebDAV protocol(Web-based Distributed Authoring and Versioning Protocol) allowing endusers with a WebDAV client to upload content into the Portal seamlessly from their desktop.
    Pls. check out:
    http://portalcenter.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/PUBLISH_CONTMGMT/TECHNOTE_WEBDAV.HTML
    Hope that helps!
    Thanks,
    Sudi Narasimhan
    Oracle9iASPortal Partner Management/Development
    I want to send some file by FTP.
    How can I send files by FTP with Oracle Portal?
    Any ideas?

  • When can i find the Oracle Portal 3.0 Casebook?

    When can i find the Oracle Portal 3.0 Casebook provided in the
    Portal online help?

    Hi
    The case book (full title: Building Advanced Portals Instructions) and its zip files for the exercises are located at
    http://portalstudio.oracle.com.
    (http://portalstudio.oracle.com/servlet/page?_pageid=478&_dad=ops&_schema=OPSTUDIO&7655_MAINPAGE_39847486.p_subid=40679&7655_MAINPAGE_39847486.p_sub_siteid=73&7655_MAINPAGE_39847486.p_edit=0)
    Hope that it is helpful.
    Cheryl

  • Where can i find the Oracle Portal 3.0 Casebook?

    Where can i find the Oracle Portal 3.0 Casebook mentioned in the Oracle portal online help?
    The following is the text copied from Oralce online help:
    Opening sample applications
    Oracle Portal provides a set of sample applications and components. Instructions for building some of these applications are provided in the Oracle Portal 3.0 Casebook. Other examples are included to showcase Oracle Portal's robust application building features.

    Hi
    The case book (full title: Building Advanced Portals Instructions) and its zip files for the exercises are located at
    http://portalstudio.oracle.com.
    (http://portalstudio.oracle.com/servlet/page?_pageid=478&_dad=ops&_schema=OPSTUDIO&7655_MAINPAGE_39847486.p_subid=40679&7655_MAINPAGE_39847486.p_sub_siteid=73&7655_MAINPAGE_39847486.p_edit=0)
    Hope that it is helpful.
    Cheryl

  • Can I Restore ORACLE PORTAL HOMEPAGE?

    I deleted some portlets for the Oracle Portal's homepage. Now I am unable to use some of the administration features. Is there a way for me to restore this page or do I have to uninstall Portal and install it all over again?

    Pl see if this link can help - http://www.oracle.com/technology/products/ias/portal/index.html
    HTH
    Srini

Maybe you are looking for

  • Win32 application error

    While trying to download and run itunes 10.5, I get an error message that says itunessetup.exe is not a valid win32 application. When I click ok, it stops downloading.

  • F110-Reports

    Dear Experts, Is there any standard reports are available for vendor bulk payment (F110) other than "S_P99_41000099 - Payment List" in order to download and send payment details to Banker? Regards Babu

  • Sales order control - reg

    Hi, In VA01, we should allow user to enter and change the quantity and material but once the order is saved the order quantity should be greyed out as well as user should not be allowed to add or delete any line items in the sales order thro' VA02 bu

  • Reduce text on 8 1/2 x 11 paper

    I have text on an 8 1/2 x 11 paper which I want to reduce further how do I do it?  Thx

  • Do NOT use text.autoSize onEnterFrame or any other loops!!

    do NOT use test.autoSize = true - with onEnterFrame or any other loops!! - it kills the processor i just found out the other day why my movieclip scrollers and dynamic menus have been laggin so much sins the dawn of time -- its all because of text.au