Can original iPad connect to tv?

Can original iPad connect to tv?

Yes.  But the TV will only show videos and the output from several other specific programs.  It cannot be used to mirror the display of the iPad in normal use.

Similar Messages

  • Can original iPad operating system be updated beyond 5.1

    can original iPad operating system be updated beyond 5.1.1

    Since you are limited to iOS 5.1.1 on an iPad 1, this may be of interest.
    App Store: Downloading Older Versions of Apps
    http://tinyurl.com/meqxplg
    App Store: Install the latest compatible version of an app
    http://support.apple.com/kb/ht5919
    Apple’s iOS App Store now offers ‘last compatible’ versions of apps for older devices
    http://appleinsider.com/articles/13/09/17/apples-ios-app-store-now-offers-last-c ompatible-versions-of-apps-for-older-devices
     Cheers, Tom

  • Can original iPad hook up with the latest version of Apple TV?

    Can original iPad hook up with the latest version of Apple TV?

    I haven't actually seen any specifications on the data rates applicable to AirPlay, however I feel that 20 Mb per second would likely be ample to cover a scenario where the iPad is receiving a stream from the Internet and sending it at the same time by mirroring to the Apple TV. Please be aware that this is my opinion, it is not necessarily fact.

  • Can my iPad connect to my BluRay with wireless?

    Can my iPad connect to my wireless BluRay player?
    Can my BluRay act as an Apple-TV device?

    Hi!
    With this FileBrowser,
    1. can I open an iphoto-library on the ipad?
    View the photos from the library?
    2. can I stream the photos to apple TV with ipad?
    (I have done an library on the TC and would want my family to have access. But they use windows. So I am thinking about buying an ipad for this use)
    Thanks!

  • How can the iPad connect to a school network?

    Just completing a school assignment and was wondering how the iPad connects to a school network?

    If you are looking for the basics of wi-fi connectivity, you can check out this  article
    http://computer.howstuffworks.com/wireless-network.htm

  • Can new iPad connect to printer via USB?

    If now I have an 30 pin to USB converted can I connect my iPad with printer via USB cable, because my printer is not support wifi or Bluetooth function. If can do I need install what suitable app on my iPad to find or connect my printer?

    The iPad only prints via Wi-Fi to printers that support AirPrint. Here's a website on AirPrint that includes a list of supported printers.
    http://support.apple.com/kb/ht4356
    To to answer your original question, no you cannotrint via USB.

  • Can an ipad connect to a dell printer?

    I just bought my ipad, but I'm not sure if it will connect to my dell printer. I know I can download an app to print but im not sure which ones will allow access to a dell printer, if any will. Help!!

    There are a number of third party apps that will work with your printer, I'm sure. Take a look at some these.
    http://www.google.com/search?q=printing+apps+for+ipad&ie=UTF-8&oe=UTF-8&hl=en&cl ient=safari

  • Can the IPad connect to a WPA2-Personal Home Network?

    My wife just got the IPad for her BDay this month, but we've been unable to connect to our linksys wireless network, having a WPA2 - Personal configuration (which requires an authenication key, never requested during IPad WiFi configuration).
    I've read IPad discussions that WPA2 networks can be used, and the General, Settings page shows my network's WiFi SSID.  But when tapped the IPad just presents a place for the password -- no key required.   It's been tough explaining to my wife (even after simplifying the password, and after updating the firmware for the router) that an authenication key is necessary (i.e. I'm the bad guy).
    Can anyone help?

    Ikers wrote:
    My Linksys had the same problem. Under the router's wireless security, I chose WPA2/ WPA mixed mode.  Everything started working then.
    Note that you are responding to a thread that has been dormant for almost three years!

  • Why can't iPad connection speed surpass 72/150 Mbs?

    The iPad boasts 5 antennas. But It seems only 1 or 2 antennae are enabled to work. I put my iPad right beside the Airpot Extreme router, the connection speed via 802.11a/n at 5GHz never exceeds 72MB, no matter how close it is to the base station. My MacBook Pro 15-inch can achieve a speed of 270MB, and my Airport Express used to extend the range can also connect at 270MB.
    Then instead of connecting my iPad to Airport Extreme, I connected it to Airport Express (being used as a bridge to extend the range). IPad at 802.11a/n can only achieve a maximum speed of 150 MB.
    So I strongly suspect there is something wrong with the firmware of the 2 Apple Routers.

    I think there needs to be an understanding of what the IEEE 802.11 standard says. The channel width for all bands is 20 MHz. The 2007 draft n-protocol allowed a channel width of 40 MHz. That was not adopted in 2009 when the n-protocol was approved. The standard now says, including the 40 MHz 2007 draft for the n-protocol:
    Protocol / Bandwidth (MHz) / Transfer rate (Mbps)
    b / 20 / 5.5, 11
    g / 20 / 6, 9, 12, 18, 24, 36, 48, 54
    n / 20 / 7.2, 14.4, 21.7, 28.9, 43.3, 57.8, 65, 72.2
    n / 40 / 15, 30, 45, 60, 90, 120, 135, 150
    So, if you are getting a transfer rate of 150 Mbps your are under the 2007 draft 40 MHz channel width, not the final approved 2009 n-protocol.
    The final approved protocol does not support that transfer rate.

  • Can the ipad connect to two bluetooths at the same time.

    i have an ipad 2 and i just bought the ipad 2 with the bluetooth keyboard, but i was wondering if the ipad could connect to the keyboard and mouse bluetooth at the same time.

    You can only pair with one device at a time

  • Can an iPad connect with an iPhone to get online?

    I was wondering if I can connect the devices via Bluetooth and use the iPhone as a modem.

    Not sure about Bluetooth, but you can set your iPhone up as a HotSpot if you have a tethering plan and use WiFi.

  • HT3887 Can the iPad connect to an A2DP bluetooth device?

    Is the ipad2 compatible with A2DP Bluetooth devices.

    OK. On your computer, go to Control Panel, Network and Internet, Set up a new connection or network.
    At the bottom of that window, you'll see:
    Set up a wireless ad-hoc (computer to computer) network
    Set up a temporary network for sharing files or an internet connection.
    Click to highlight this and click on the NEXT button.
    It will ask you for
    Network name (create your own),
    Type security (check your Op-Area requirements. I recommend WPA2)
    Security Key (required for a secure network)
    From there, it will start setting up the new network and step you through it.

  • I have a MacBook pro and an IPAD.  My MacBook gets wi fi but my IPAD does not ... and yet both have been connecting to the Internet for four years. Why isn't my IPAD connecting now?

    I have a macbook pro and an ipad ... both have which regularly connected to the web through my airport for two years ... now, my ipad won't connect ... and the genius bar says my ipad is ok. Does anyone have any suggestions as to the cause and the cure?

    Can your iPad connect to other Wi-Fi networks? If so, is it possible that you may have configured your AirPort to restrict access to the iPad by including the iPad's MAC address in the AirPort's Timed Access Control settings?

  • TS1398 I have an original iPad 32 why can't I connect on my home wi-fi but can connect anywhere else. No problems at home connect with other iPads and MACs.

    I have an original iPad 32 why can't I connect on my home wi-fi but can connect anywhere else? No problems at home connect with other iPads and MACs.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • How can I get an HD movie from iTunes store to play on original iPad

    I recently purchased an HD movie--Brave--from the iTunes store.  I'm trying to play on my original iPad (iPad 1), but iTunes refuses to synch it because it says it is an unsupported format.  The movie is in 1080p format.  I typically get both HD and SD formats when I purchase movies, but iTunes no longer downloads the SD version automatically when I purchase the HD version.  I attempted to get an SD version from the store, but it said I already purchased the movie and instructed me to check the downloads.  There is no SD download pending and a check for new downloads was fruitless.
    Can someone confirm that the original iPad is unable to play HD video?  I imagine it is the 1080p that's the problem.  Can anyone confirm that 720p would work?  Is there no longer a means to get both HD and SD when purchasing a movie from the iTunes store?  If there is, how?
    Thanks for your help.
    Jamie

    You can get the SD or 720p version by:
    Open iTunes 11
    Click iTunes in menu bar > select Preferences...
    Click on the Store tab
    Change When downloading High Definition videos, prefer dropdown to 720p > click OK
    Click on the iTunes Store button
    Click Purchased link
    Click Movies tab
    You should now see a download icon for the movies you already have 1080p version of.
    Click on this download icon to download the 720p version.
    This will put a 720p version in the same folder on your hard drive as the 1080p version.  If you have iTunes setup to play 1080p when available, it will play the 1080p version.  When you connect your iPad 1, it will sync the 720p version.
    Don't forget to change your preference back to 1080p so you can continue to get the higher quality version.

Maybe you are looking for

  • Use Adobe forms for Dunning letters

    Dear All, We have a requirement to use dunning letters using Adobe Forms. I would like to know, 1. Is there a way we can attach adobe forms for dunning letters. 2. what could be the estimate do develop these letters using adobe forms. 3. Could I get

  • Granting SocketPermission using signed applet

    I have had a dream of locally caching a jar file for an applet so that all the code will be on the client machine after the first time the applet was loaded. Basically, I have a very thin applet composed of a jar class loader and a tiny applet which

  • Changing price control indicator and posting difference to sperate account

    Dear Guru's Need your advice on how to handle the following scenario. Company wants to change the Price ontrol indicator in a material from V(moving price average) to S(Standard cost).However there is stock in the inventory for this item.Additionally

  • Converting from Photoshop v.1 to a current version and retaining captions and tags

    I have Photoshop Version 1 running under Microsoft XP.  The computer  died.  I need to move my pictures and equally importantly the tags and  captions that have have been attached to the pictures.  I have  downloaded Photoshop Elements 9 and I have b

  • Problems with execute immediate

    HELLO : How can I execute a procedure (with input , output parameters ) , in another schema?? I have the following code : V_SENTENCIA:= 'begin '||v_schema_name|| .DAR_ID('||V_CODE||',:p1); END;'; EXECUTE IMMEDIATE V_SENTENCIA INTO V_Num and the decla