Can OS X Lion be used without a wireless connection?

I have two wired networked Mac Minis with track balls. Can't figure out what I would need to upgrade or change to use Lion. Would I need to go wireless?

From the How to Buy web site...
To upgrade on day one:
Step 1:
Make sure your Mac can run Lion.
Your Mac must have an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor to run Lion. Find out if your current Mac has one of these processors by clicking the Apple icon at the top left of your screen, then choosing About This Mac.
Step 2:
Make sure you have the latest version of Snow Leopard.
Get up to date with the latest version of OS X Snow Leopard to purchase OS X Lion from the Mac App Store. If you have Snow Leopard, click the Apple icon and choose Software Update to install the latest version.
Step 3:
Download OS X Lion from the Mac App Store.
When OS X Lion is released in July, open the Mac App Store from your Dock to buy and download it. Then follow the onscreen instructions to install Lion.
Here is the link to the site.
http://www.apple.com/macosx/how-to-buy/
If you want to buy on the day it is released, this how you will have to go about it. If you have a working Internet connection and you can connect to the Mac App Store you should be able to download it. Don't see why wireless will be necessary.
Make sure your Mac meets the requirements. You will probably have to upgrade to 10.6.7 as well.

Similar Messages

Can oracle inventory forecasting be used without order management??

Can someone please tell me how oracle forecasts are used.
Like i have configured and tested it but i want to know how it calculates forecasting and whether it can be used without order management module or not
when i define item comsumption entries and gvie a quantity in current, the ending date and then see bucketed, it shows same forecasted quantity for all periods that i entered in item comsumption entries
I dont understand this
And why is forecasting necessary for reorder point planning
Some please explain
Thanks
Emm

Query: "can oracle inventory forecasting be used without order management?"
Yes, in that case it can accept manually entered forecasts or forecast generated from Inventory demand history (say Miscellaneous issue, Inter-org Transfer, Issue to WIP) excluding Sales Order issues (as OM is not included).
For remaining questions you can refer to my earlier post under the following thread. Please refer to the bottom section (thread was started with a different subject)
serial attribute and org attribute problems with item master
If your questions are answered you can mark the thread as appropriate.
Thanks
- Supro

Is there a way that I can control iTunes with the iPhone without any internet connections?

First let me say that I am ready to throw this POS in the lake. Is there a way that I can control iTunes with my iPhone without any internet connections? On my houseboat I have a wifi router and want to connect my phone to my computer to control my music which plays from my computer through my stereo. I can easily do it with my laptop without having to jump through any internet APPLE BS , but I dont want to have my laptop out on the deck. I just want to use the phone as a remote control.
Remote wont do it because it keeps saying Im not connected to the internet, even though is is connected to my computer. Same problem with JumiAmp.

It should have an option to manage iTunes library without network connection, like Bluetooth or connect directly to the computer without a router or wi-fi, i live outsite of the city and i dont have the ability to control my iTunes librry from the iphone

Can't get pan to use more than 4 connections/server

My ISP has a news service that I users can access with a max of 20 connections per user.
I've been trying to use pan to download some file from this server, but I can't get it to use more than 4 connections.
On the pan web site it says to go to the NNTP menu,but I just can't find it.
What's up? Am I blind?

Have you overriden the doPost() method in ViewFormData? If not I think that you get this error message as a default
doGet() and doPost() should do the same thing so have one call the other

HT1390 Can you watch a rented movie without an internet connection?

It is my hope to rent a movie today
and watch it while on a flight tomorrow.
Can I watch a rented movie without an internet connection?
I.e: is it streamed or downloaded?
Do I have to buy the movie in order to watch it without an internet connection?

Please be aware of the movie rental's time limitation that you have 30 days from the time of rental to watch your movie, and once you start watching it, you have 24 hours to finish watching it. You may watch it as many times as you like during those 24 hours. It may be helpful to make sure the download completes successfully before you begin watching the movie.
Once the download is complete you can watch it without an Internet connection. However, an Internet connection to the iTunes Store is required to authorize playback or activate the 24 hours time-limit of movie rentals. This means, only during the starting of the movie. Once you have started playing the movie rental, internet connection is not required. You can play anywhere without internet connection.
For more information on movie rentals, you can visit:
iTunes Store: Movie rental frequently asked questions (FAQ)
http://support.apple.com/kb/HT1657
Note: 24 hours time limit is for United States customer only, while 48 hours for other countries.

Since upgrading to mountain lion my iphone no longer wirelessly connects to my itunes via wi-fi... is there a remedy for this? thanks

since upgrading to mountain lion my iphone no longer wirelessly connects to my itunes via wi-fi... is there a remedy for this? thanks

I am also having the same problem since upgrading to mountain lion. The symptom is strange.
If I connect my iPhone/iPad using cable first, uncheck and then check the wifi sync option, and then disconnect the cable, iTunes will still be able to see the devices through wifi. But if I restart my computer, it will fail again. And I am tired of repeating this exercise.
Anyone has the same problem?

Satellite A660-13T - I can't go from 65 Mbps with the wireless connection.

+Sorry for my English, is not my native language.+
Hi,
I expose my problem:
I can't go from 65 Mbps with the wireless connection. I can't move from that connection speed.
Laptop configuration:
* Windows 7 Ultimate 64 bits (with all updates installed).
* All drivers updated properly.
* With the latest version of BIOS.
Router:
* Tp-link TL-WR1043ND, installed 3 meters above the laptop (without obstacles).
Configuration of router:
* WPA2-PSK AES.
* 802.11n
* Maximum output power.
* Channel: 11 (not automatic, this channel is relatively free).
* Channel width: 40 Mhz.
* Maximum tx rate: 300 Mbps.
Other information:
* The wireless card drivers are correctly then updated (ver. 5.60.48.35).
* The router has updated firmware.
* I have tried all settings of the wireless card.
* Bluetooth off (without interferences).
* {color:#ff0000}There are other computers on the network that connects 150 and 300 Mbps (with the same network configuration).{color}
Thanks in advance,
Greetings.
Message was edited by: Xibalba

Hi buddy,
> I kept O.S. original for a week and the problem was the same
If you had the same problem with factory settings you should test another router. Maybe its a malfunction of router or something else (not compatible to your WLAN card).
Furthermore ask the manufacture of your router if they know something about this.
In worst case its a hardware malfunction of your notebook. You should contact nearest service centre. I believe they can fix it under warranty, because A660 is pretty new notebook.
Good luck! :)

I have an existing new belkin modem router which works fine with quite a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then ju

I have an existing new belkin modem router which works fine with quiet a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then just like my macbook pro and (imac future purchase) to wirelessly back up to it???????????

Your will need to perform a Factory Default Reset on the TIme Capsule to clear out the current network settings and then reconfigure it to "join" your wireless network using the AirPort Utility setup application.
To perform the Factory Default Reset on the Time Capsule....
Pull the power cord from the back of the device
Wait a few moments
Hold in the reset button on the back of the Time Capsule and keep holding it an additional 8-10 seconds while you simultaneously plug the power cord back in to the Time Capsule
Release the reset button after the hold period and allow 25-30 seconds for the Time Capsule to restart to a slow, blinking amber light
On your Mac.....
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click Continue
Follow the guided setup and choose the "join" option when it appears duriing the setup
You will need to know the exact type of wireless security that the Belkin router is using to enter this information during the setup of the Belkin. Otherwise, the Time Capsule cannot join the network, and you will receive an error message after the configuration process.

How can I redeem lion os code without using mac computer? i'm trying to install lion on my mac that i got from a friend.

i tried to restore it to it's original settings but when i tried to reinstall it, it would say that i hadn't bought it. so then i bought the lion os and the code took forever to come but now i cannot find anywhere that i can input it. i cannot access the mac store because the mac doesn't have lion and i can't input the code using my windows computer. he didn't have any installation discs and i'm not wasting another cent on this computer to buy them. is there something i can use to input the code?

The Lion redemption code can only be used in the App Store application found in 10.6.6, and higher Macs.
You can't download it from a PC or a phone.

Can I install Lion Server using ARD?

I've got a 2008 xserve I'd like to update to Lion Server (from 10.6.8 server). Can I successfully install it using ARD or is it going to hang at some point without ARD access waiting for some kind of input to proceed with the installation?
Thanks
Eric

Yes. You need to buy Leon and Server via AppStore. Think twice before click [buy app]... read posts on this group.

Can a waveform graph be used without for loop

i would like to know if a waveform graph can be used without a for loop and if so, how? I tried using a while loop only, but the reading becomes too fast.
can someone advise

Dear nebb,
first of all, graph is usually an offline plot of the acquired data but to use it as an online display u need to use build arrays in for/while loop which keeps on adding new points & plots in waveform graph.
I am including a vi which incorporates a while loop in which by using build array, points keep on increasing & simultaneously they are plotted in the waveform graph.
Using for or while loop, it has no concern with speed. it depends on the code inside the loop which makes them faster or slower.
For making slow readings, you can put some delay inside while looping.
Hope this works. YOur feedbacks are welcome.
Best Regards,
Nirmal Sharma
India
Attachments:
waveform_graph_without_for_loop.vi ‏17 KB

Can a inspire p5800 be used without a computer, as a stand alone speaker system

Can an Inspire P5800 be used as a stand alone speaker system? Here is my story. I just got this speaker system from my girlfriend who did not know that it had to be hooked up to a computer/soundcard etc... She thought it would just hook up to my MP3 player and be used as a speaker system downstairs in my shop. It looks like the decoder DDTS-100 could be bought and used as a stand alone sound adapter? Or is there a cheaper way? The only other way I can see is a triple headphone adapter that has one 1/8 inch plug going to three 1/8 inch jacks that can be fitted with a 1/8 inch plug to plug cable in each jack, then those going into the back of the subwoofer/connector area. Would that be a mono source that way? Any help would be appriciated. marc

I have set this system up with a creative zen vision m without using a computer just stand alown, but i have only been able to get the subwoofer, front left and right speaker to work. I dont know if that helps.

How can i access the internet using a non-wireless...

Before upgrading my BT broadband to BT Infinity, I was able to connect my two desktop PC's to the BTHUB2 without a problem. One of them is running Windows 7 and has a wireless connection, the other is running Windows XP and does not have a wireless adapter but it was connected by an ethernet cable to the BTHub2 which was portable and could therefore be plugged into any of the telephone sockets that were positioned around the house.
Unfortunately, since upgrading to the BTHub3 which is not portable, the Windows XP PC is too far away to connect using an ethernet cable and it is impractical to move it closer to the hub.
I'm happy with the position of the hub and do not wish to move it, so I need to consider other options.
As both PC's are in the same room, I understand that it is possible to link them with a Lan cable, and this will enable me to add the XP PC to my home network.
What I would like to know is what cable I need. (ie. what do I ask for) ? Is it an ethernet crossover cable ?
I'm sure that other BT Infinity users must have experienced a similar problem with older non-wireless equipment that is not in close proximity to the hub. I would be grateful for any advice that may help me to find the best solution to the problem.

Thank you for confirming that a LAN and ethernet connection are the same thing. I have tried linking the two PC's with an ethernet cable and I've read so many articles on how to configure them both to enable the XP computer to connect to the internet via the WIN7 computer and it's wireless connection to the BTHub3, but I'm afraid that I'm now more confused than when I started.
It should be possible to do so, but unless someone can explain the correct procedure in step-by-step fashion, I don't think that I will ever find the solution using this method.
Using a power line solution sounds like a simpler solution, but even that raises more questions.
Just to clarify the problem as I understand it -
The BT Hub is static and positioned in the hallway.
Both PC's are in the same upstairs room.
The room has a telephone socket on an extension which works with a telephone. There are also power sockets available.
I already have a home network set up with the WIN7 wireless PC as the host.
I have wireless devices connected to the home network that are working perfectly (eg. HDTV,Xbox360, Laptop), but can I heck figure out how to connect the WIN XP to the home network.
I have managed to connect it directly to the Hub using an ethernet cable, but it involved carrying it downstairs into the hall and plugging the ethernet cable directly into the hub, and although this worked a treat, I need the PC to be upstairs.
Using a long ethernet cable is not an option either I'm afraid. Apart from the untidiness, I believe that it would seriously reduce the speed of the BT Infinity connection, which is also the reason that BT do not recommend plugging the hub into a telephone extension socket.
So far, using the ethernet cable between the two PC's and using the Networking Connection Wizard on the XP PC, I have tried connecting using the local area network with limited success. The STATUS window shows that it is connected with a speed of 100.0 Mbps, but the ACTIVITY only shows that there are packets being sent, none received. Also, clicking on Internet Explorer brings up a window stating that no connection to the internet is avalable.
However, my initial optimism that this at least indicated that progress had been made quickly disappeared after adding the   XP machine as a device to my Homegroup on the WIN7 PC. The local area connection STATUS window on the WIN7 PC shows the media state as 'enabled' and 'speed 100.0 Mbps', but again it only shows that packets are being sent and none received. Furthermore, IPv4 connectivity is showing 'no internet access' and IPv6 connectivity shows 'no network access'.
I've tried running Windows Network Diagnostics and the troubleshooter stated that the Local Area Connection does not have a valid IP configuration. Here is the troubleshooting report:
Issues found:
"Local Area Connection" doesn't have a valid IP configuration NOT FIXED
Reset the "Local Area Adapter"                                             Completed
Investigate router or broadband modem issues                      Completed
Details about network adapter diagnosis:
Network adapter Local Area Connection driver information:
Description............................ Intel (R) 82562v-2 10/100 Network Connection
Manufacturer......................... Intel
Provider................................ Microsoft
Version................................. 9.13.4.10
Inf File Name........................ C:\Windows\INF\netele32.inf
Inf File Date.......................... Monday, July 13, 2009   8:46:31 PM
Section Name........................ E104C
Hardware ID......................... pci\ven_8086&dev_10c0
Instance Status Flags............. 0x180200a
Device Manager Status Code.. 0
IfType.................................. 6
Physical Media Type.............. 0
The Internet Protocol (TCP/IP) Properties on both PC's for the Local Area Connection were input as follows:
IP address: 192.168.1.68 (with 68 being the next device number available)
Subnet mask: 255.255.255.0
Default Gateway: 192.168.1.254
Preferred DNS server: 192.168.1.254
Alternate DNS server: . . . .
I've also tried configuring the above properties by ticking the box 'Automatically detect settings', but it reports no connectivity. I haven't tried the third available configuration option which is 'using a proxy server', because I don't know if it is relevant or not and it is asking me to input an 'address' and 'port' ?
Any solution ideas would be greatly appreciated.

HT4356 How can i print from my iPad without any wireless network?

I develope bids on my iPad out in the field (where a wireless network is hard to find) and I need to print it from my truck to deliver to my customers.

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
iPad Power: How to Print
http://www.macworld.com/article/1160312/ipad_printing.html
Check out these print apps for the iPad.
Print Utility for iPad ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
Print Agent Pro for iPad ($5.99) http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8 Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
FingerPrint turns any printer into an AirPrint printer
http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
 Cheers, Tom

I can't open my gmail or send gmails on Firefox. I can read and send gmails on other servers. It started when I was using a hotels wireless connection. Firefox said that this was not a secure site and asked if I wanted to overide it. Since then I have

I cannot open my gmail nor send any gmails on Firefox. My wife also has gmail and she has no problem on firefox opening or sending her gmails. Also, I cannot access my settings. It started when I was at a hotel last Friday using their wireless connection. When I turned firefox on, which automatically goes to gmail, firefox would not open my gmail as it stated that this was not a secure site. I probable did something incorrectly and I got blocked out. All my other bookmarks work fine. I can access my gmail using other servers. Please help. Thank you.
== This happened ==
Every time Firefox opened
== June 11

how can i open my gmail at mozilla firefox? because i cant open it..

Can OS X Lion be used without a wireless connection?

Similar Messages

Maybe you are looking for