Can os x server be started and stopped when needed?

I want to be able to show website progress to clients but don't want to have server running all the time... Is shutting off the website option the only way to stop it or can I shut down the whole server?

It's not clear what you mean by "site". Services can be disabled in the Server.app interface, including the Apache webserver:
Notice that every service has an On/Off feature. You can shut off Apache if you only need it occasionally. Server.app still leaves a listener daemon running in the background which is not advisable to disable unless you are uninstalling the application.

Similar Messages

Can Video widgets start and stop when entering and exiting the browser viewport?

I like to use multiple autoplaying/looping video clips on a single page but I need to figure out how to make the videos start only when they enter the viewport on a browser and stop after they exit the viewport. Does anyone know a way to do this?

I do not know if this can have an affect on it but the videos are being downloaded through multiple computers to a private server and being accessed through the mac. Please let me know what you think.

Transcoding starting and stopping -- when left alone overnight?!

I imported a good deal of footage yesterday. The transcoding was going to take a while, but thankfully with FCPX I can still start editing with the original media. When I left the office for the night I figured the footage would finish transcoding overnight and this morning I could be running on all proxy media.
This morning I came back and had to log in, evidenly taking it out of sleep. But FCP had not finished the transcoding and started it back up when I woke the computer. I figured it was a "putting hard disks to sleep" problem or something, but... I went to the "transcoded media" folder to check the times of when the proxy media had stopped... You can tell when the clip started transcoding with the "created by" date, and when it finished by the "last modified" date. I found something quite odd. Here's the sequence of events:
Left office at 6:30p
Handful of clips continued to be transcoded (all taking about 1-3 minute to transcode depending on the length)
Then at 7pm a clip was created/started but finished/modified at 8pm. And HOUR, but it was the same length as all the last clips
Then at 8pm the next clip was created/started and finished at 12:30a. 3 1/2 hrs!
Then it went on as normal for a hour transcoding about 25 clips at 1-3 minutes each
Then at 1:30a one started and didn't finish until 6:30a. 5 Hours for one clip!
Then the 6:30a clip started to transcode, and didn't finished until I logged into the computer at 10:30a
Ever since then it's transcoding at about 1-3 mintues per clip
I would think it's a computer/HDD going to sleep, but why is it waking up in the middle of the night, working for a bit, going back, then waking up, then going back. Taking "naps" and strange intervals. I figured it would stay down once down.
I obviously want to figure this out because I am used to walking away at night knowing that it will continue rendering/transcoding overnight.
Any thoughts?
On a iMac 3.4 GHx i7 16gb ram. My media is on a external WD HDD connected via USB.
Thanks!

I may have solved my own problem...
In the system prefs I had not changed the setting to put the computer to sleep NEVER. I guess transcoding and background processes isn't considered 'activity' to the OS. So the computer went to sleep.
But I did have "wake of network access" checked. So i'm assuming that something was needing to use the network and woke the computer. But I'm not sure what the program is.
I still find it odd that sometimes it woke and did an hour so transcoding, and sometimes it woke and did just one clip.

Hi - my Imac's hard drive keeps starting and stopping, when the imac is idle. The Imac is working perfectly otherwise. Any ideas?

Hi my 4 year old Imac's hard drive keeps starting, whirring briefly, then stopping, when the machine is asleep. Doesn't do it when in actual use. The Imac is working perfectly otherwise. Any ideas?

Gracias mi amigo; there are a lot of options on the side bar in console, but I think I can see the issue - calendar agent - thousands of entries, all identical. Recently installed outlook 2011, so ? conflicting with Ical?
23/06/2013 00:31:52.122 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:31:52.168 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:32:27.116 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:32:27.116 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:32:27.116 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:32:27.116 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:32:27.162 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:33:01.310 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:33:01.311 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:33:01.358 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:33:36.378 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:33:36.379 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:33:36.379 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:33:36.425 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:34:11.034 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:34:11.034 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:34:11.034 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:34:11.082 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:34:44.993 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:34:44.993 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:34:45.039 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:35:20.013 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:35:20.014 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:35:20.014 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:35:20.015 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:35:20.015 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES
23/06/2013 00:35:20.062 CalendarAgent[195]:
com.apple.message.domain: com.apple.calendar.store.inconsistency
com.apple.message.signature: Other CalDAV
com.apple.message.signature2: etag (ctag)
com.apple.message.summarize: YES

How to create services start and stop automation script for diff servers

Hi All,
i want to create a bat file for automation purpose to start and stop services
i have some services in 1st server aand some in 2nd server and some in 3rd servers.
has you all know i have to follow sequences to start and stop services can any help me in creating .bat by linking 3 servers fo starting and stoping services.
Thanks in advance
Regards
SM

Hi,
this is the list of start oder for services in 11.1.2.1 from the Installation and Configuration Guide
1. Databases for repositories.
2. Any corporate user directories that you plan to configure for use with Shared Services.
3. Foundation Services Managed Server application server, which includes Shared Services,
and EPM Workspace.
4. Reporting and Analysis Framework — Agent Service (if required for your environment)
5. Reporting and Analysis Framework Application Server (if required for your environment)
6. Web server
The remaining services and processes can be started in any order:
1. Performance Management Architect Services
2. Performance Management Architect application server
3. Performance Management Architect Data Synchronizer application server
4. Essbase Server
5. Administration Services application server
284 Starting and Stopping EPM System Products
6. Integration Services Server
7. Essbase Studio Server
8. Provider Services application server
9. Financial Reporting Services
10. Financial Reporting application server
11. Web Analysis application server
12. Calculation Manager application server
13. Planning application server and the Hyperion RMI Registry
14. Financial Management service
15. Financial Management Web application server
16. Strategic Finance service
17. Performance Scorecard application server
18. Performance Scorecard Alerter application server
19. Profitability and Cost Management application server
to start services on different servers you can use the sc command in your batch file
for eg
sc \\10.121.201.21 start HypS9FrameworkAgent

Flash player starts and stops in IE8 Vista

The clip starts and stops when running in IE8 on vista platform
It keeps re-buffering
how do i fx it

Is the video starting and stopping or just the audio? What OS, browser, and Flash Player Version are you using? Can you also provide us with a URL to try out?
Thanks,
Chris

Pump Start and Stop?

While making the I/O list, I have identified theDigital Ouput, Port0/line1 as start for the pump and Digital Output, Port0/line1 for stop i.e is two port, lines, of the pump...but while making the software, VI, I am using the verticle toggle switch to consider the start of pump as up and stop as down of the toggle switch which works at one DO port line.
How can I give two signal start and stop to the pump?
Should I use two buttons? Which ones?
I am confused. Please let me know.

What do the two DO lines do? Ultimately there will be one device (contactor, relay, thyristor, ...) which has two states (like a single boolean) to turn the pump on and off. How do the two digital lines connect to that control device? Are they inputs to some kind of electronic pump controller or are they simulating the standard industrial Start and Stop buttons via relays? Something else?
You can use the single switch on the front panel and the boolean Not function to create the two lines for your DO.
Lynn

How to start and stop looping

I'm very new to Flash / action script, so I just need to know where to put both the start loop, and the end loop code (below) in my Flash file to make the waving effect on this flag (link below) start and stop when I need it to, because I'm adding a small amount of flash both before and after it. thanks.....
loopI = setInterval(loopF,40);
to start the waving and use:
clearInterval(loopI);
to stop the waving.
function loopF(){
    // move the matrix by speed along x to shift the noise
    shift.translate(speed, 0);
    // drawing in the perlin movie clip,
    // create a rectangle with the perlin noise
    // drawn in it with an offset supplied by the
    // shift matrix
    with (displace_mc.perlin){
        clear();
        beginBitmapFill(noiseBitmap, shift);
        moveTo(0,0);
        lineTo(ramp._width, 0);
        lineTo(ramp._width, ramp._height);
        lineTo(0, ramp._height);
        lineTo(0, 0);
        endFill();
    // draw the displacement movie clip in the
    // displaceBitmap (used in displaceFilter)
    displaceBitmap.draw(displace_mc);
    // apply displaceFilter to the flag
    flag_mc.filters = [displaceFilter];
updateAfterEvent();
http://www.senocular.com/flash/source.php?id=0.188

i told you and it's in your message:
use:
loopI = setInterval(loopF,40);
to start the waving.
use:
clearInterval(loopI);
to stop the waving.
// do not edit the below code:
function loopF(){
    // move the matrix by speed along x to shift the noise
    shift.translate(speed, 0);
    // drawing in the perlin movie clip,
    // create a rectangle with the perlin noise
    // drawn in it with an offset supplied by the
    // shift matrix
    with (displace_mc.perlin){
        clear();
        beginBitmapFill(noiseBitmap, shift);
        moveTo(0,0);
        lineTo(ramp._width, 0);
        lineTo(ramp._width, ramp._height);
        lineTo(0, ramp._height);
        lineTo(0, 0);
        endFill();
    // draw the displacement movie clip in the
    // displaceBitmap (used in displaceFilter)
    displaceBitmap.draw(displace_mc);
    // apply displaceFilter to the flag
    flag_mc.filters = [displaceFilter];
updateAfterEvent();
http://www.senocular.com/flash/source.php?id=0.188

How to start and stop a server

I am doing some sockets programming.
Now, when I want to get the TomCat 4 server running for instance, I would have to run the startup.bat or startup.sh file. To stop the server I run the shutdown.bat or shutdown.sh file.
Can I do the same thing in Java?
That is, in one window, I run a program: C:\>java myserver start
The server starts running and holds there.
In another window, I run another command: C:\>java myserver stop
and the server in the other window stops.
I am thinking the server would be running in a thread. When I shut it down, I close the thread just like in the Applet Clock example.
I've tried this but it doesn't work.
Can anyone please advise.
Thanks.
Anthony.

Not precisely that way, but just off the top of my head, you would have to have a handle to the proccess (server) in the first window, then have a monitor program that allows you take this handle and end it. I would make this monitor program be the gateway to starting and stopping your server. To run a .bat file you can use runtime.exec().

Sql server agent is not highlighting start and stop options

I configured snapshot replication , after that sql server agent is not highlighting start and stop options in instance.
But I can start & stop it in services.msc
how I can solve this?

Hi,
Can you post exact error message.
Also refer below article, may be similar issue like yours.
How to start SQL Server Agent when Agent XPs show disabled
Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
Praveen Dsa | MCITP - Database Administrator 2008 |
My Blog | My Page

Starting and Stopping Server from Administration Console without using system ID

Hi,
I tried to create another user in the ACL and add it to the Administrators
group. When I connect to the admin console using this user I receive error
message NoAccessRuntimeException. Can anybody show me how ti configure user
to access the console to start and stop managed server. I am using WebLogic
6.1 SP1. TIA.
regards,
Rudy

Any user added to the Admin group should be able to use the weblogic.Admin
utility and stop the server and access the console. So if we add Rudy as a user
to the Admin group then Rudy should be able to stop the server and also use the
weblogic.Admin commands. however, you cannot start the server with rudy's
password. You will require a system password for starting the server.
Please check if the user has been added correctly to the Admin group. you can
check this in the fileRealm.properties file:
user.rudy=0x751cc5f18261ba5e570c19a0d2d3cc29a5c5de63
group.Administrators=system,rudy
hope this helps,
Mihir
Rudy Sutjiato wrote:
Hi,
I tried to create another user in the ACL and add it to the Administrators
group. When I connect to the admin console using this user I receive error
message NoAccessRuntimeException. Can anybody show me how ti configure user
to access the console to start and stop managed server. I am using WebLogic
6.1 SP1. TIA.
regards,
Rudy

How to start and stop Oracle Application Server from ANT

How to start and stop Oracle Application Server and Web application from ANT
Thanks in Advance.
Mani

Hi,
You can use: startManagedWebLogic.sh, it is in your domain directory and you have to execute it in this way
./startManagedWebLogic.sh managedServerName http://adminServerHost:adminServerPort
For instance, in my case I use:
unixserv01:/webportal/domains/appServerWeb/bin>startManagedWebLogic.sh managedServ01 http://pelma3w3per01.mesaperu.next:7001
You have to run it on the machine where the managed server was installed.
Best regards,
Raúl

I am getting a service start and stop alert while doing the windows server updates.

HI
I am getting a service start and stop alert while doing the windows server updates. Services are wmiApSrv , WPDBusEnum. Can you please help me to under stand why i am getting the service start and stop alert.
Thanks & Regards
Abhilash K Joy

Hi,
The WMI Performance Adapter (wmiApSrv) service provides performance library information from Windows Management Instrumentation (WMI) providers to clients on the network. This service only runs when Performance Data Helper is activated.
This service is installed by default and its startup type is Manual. When started in the default configuration it will log on using the Local System account.
You can try troubleshooting the issue using Clean Boot to check if the issue is related to third-party software.
How to perform a clean boot in Windows
http://support.microsoft.com/kb/929135/en-us
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

How to Starting and Stopping OC4J Server using Ant

How to Starting and Stopping OC4J Server using Ant
In the ant task definitions for ant-oracle-classes.jar (see antlib.xml) there are two tasks called
     name="restartServer" classname="oracle.ant.taskdefs.deploy.JSR88StartServer"
     name="shutdownServer" classname="oracle.ant.taskdefs.deploy.JSR88ShutdownServer"
I thought that these would shutdown and start the OC4J server. I guessed the parameters as – (Does anyone know where 50 ant targets are documented?)
<oracle:restartServer
userid="${oc4j.admin.user}"
     password="${oc4j.admin.password}"
     deployeruri="${deployer.uri}"
/>
<oracle:shutdownServer
     userid="${oc4j.admin.user}"
     password="${oc4j.admin.password}"
     deployeruri="${deployer.uri}"
/>
This, however does not start and stop the SOA suite. To do that I've hacked this solution together -
<path id="oc4j.console">
     <pathelement location="${oracle.home}/config"/>
     <pathelement location="${oracle.home}/jlib/startupconsole.jar"/>
     <pathelement location="${oracle.home}/opmn/lib/optic.jar"/>
     <pathelement location="${oracle.home}/lib/xmlparserv2.jar"/>
</path>
<target name="stop" description="stop oc4j server" depends="init">
     <java classname="oracle.appserver.startupconsole.view.Runner">
          <classpath refid="oc4j.console"/>
          <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
          <arg value="stop"/>
     </java>
</target>
<target name="start" description="restart oc4j server" depends="init">
     <java classname="oracle.appserver.startupconsole.view.Runner">
          <classpath refid="oc4j.console"/>
          <sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
          <arg value="start"/>
     </java>
</target>
This sort of works – except when the SOA suite doesn't stop cleanly – and needs user interaction to press a Close button. This isn't very useful when doing a continous integration build and deploy.
So, does anyone have any suggestions or alternative methods to do this?
- frank

Actually if the server throws exceptions when it stops (which it always has since we applied patch 10.1.3.3) this technique will pause until a user responds to pop-up ... So a better way (I think) is -
<target name="start" description="start oc4j server" depends="init">
<java classname="oracle.appserver.startupconsole.view.Runner">
<classpath refid="oc4j.console"/>
<sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
<arg value="start"/>
</java>
</target>
<target name="stop" description="stop oc4j server" depends="init">
<echo message="We expect OC4J *NOT* to stop cleanly, so we will timeout after 3 minutes ..."/>
<java classname="oracle.appserver.startupconsole.view.Runner" fork="true" timeout="180000">
<classpath refid="oc4j.console"/>
<sysproperty key="ORACLE_HOME" path="${oracle.home}"/>
<arg value="stop"/>
</java>
</target>
<target name="restart" description="restart oc4j server">
<antcall target="stop"/>

<waitfor maxwait="2" maxwaitunit="minute">
<not><http url="http://${oc4j.http.hostname}:${oc4j.http.port}"/></not>
</waitfor>
<antcall target="start"/>
</target>

HT1355 can an application start and stop airplane mode?

can a native application start and stop airplane mode on the iPhone and iPad?

No. It must be done manually by the phone user.

Can os x server be started and stopped when needed?

Similar Messages

Maybe you are looking for