Can OS X server xmpp server do group chats, video chats and group video chats??

Question is above!! :)

We actually don't use a whole lot of data on the server - with video there's a lot of data involved but it's generally stored locally on individual raided drives and backup drives. Working with probably less than 1TB of total data that will be connected directly to the server to be shared. So I'm looking at a 4TB RAID 0 drive to hook up to it.
Read a little about Rumpus. Are you suggesting it as an alternative to OS X Server or something to work in conjunction with it?
The most important thing is for us to be able to send out links to files on the server for clients to view, and also for clients to have the ability to upload to us. I'm assuming this can be accomplished via Filezilla or Cyberduck if we didn't want to invest in Rumpus? I'll have to do more research on that. Just don't want to present this option to my boss and drop the cash on it only for it to not end up serving our needs.
Thanks!

Similar Messages

Event ID 1085 on DC - Failed to Apply the Group Policy Local Users and Groups Settings

I have a domain with 2 DCs. The primary DC is running Server 2012 and is raising Event ID 1085 every 10 minutes and 20 seconds.
Windows failed to apply the Group Policy Local Users and Groups settings. Group Policy Local Users and Groups settings might have its own log file. Please click on the "More information" link.
System
- Provider
[ Name] Microsoft-Windows-GroupPolicy
[ Guid] {AEA1B4FA-97D1-45F2-A64C-4D69FFFD92C9}
EventID 1085
Version 0
Level 3
Task 0
Opcode 1
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime] 2014-10-20T20:09:03.706992400Z
EventRecordID 130087
- Correlation
[ ActivityID] {FDDFB8C5-9ECF-41B9-B2B4-3AD0B345A37A}
- Execution
[ ProcessID] 1000
[ ThreadID] 3280
Channel System
Computer SERVER.DOMAIN.NAME
- Security
[ UserID] S-1-5-18
- EventData
SupportInfo1 1
SupportInfo2 4404
ProcessingMode 0
ProcessingTimeInMilliseconds 10343
ErrorCode 183
ErrorDescription Cannot create a file when that file already exists.
DCName \\SERVER.DOMAIN.name
ExtensionName Group Policy Local Users and Groups
ExtensionId {17D89FEC-5C44-4972-B12D-241CAEF74509}
Everything I look up for Event ID 1085 seems to be about a different cause.
Any ideas?

I enabled tracing on a domain gpo and I still get the error when running gpupdate /force .
I'm also still getting Event 1085. Here's the trace file. I've anonymized the site/domain and the GUIDs.
2014-10-21 11:16:54.003 [pid=0x3e8,tid=0xcd0] Entering ProcessGroupPolicyExLocUsAndGroups()
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] SOFTWARE\Policies\Microsoft\Windows\Group Policy\{GUID-1}
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] BackgroundPriorityLevel ( 0 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] DisableRSoP ( 0 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] LogLevel ( 2 )
2014-10-21 11:16:54.018 [pid=0x3e8,tid=0xcd0] Command subsystem initialized. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] Background priority set to 0 (Idle).
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ----- Parameters
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] CSE GUID : {GUID-1}
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] Flags : ( X ) GPO_INFO_FLAG_MACHINE - Apply machine policy rather than user policy
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( X ) GPO_INFO_FLAG_BACKGROUND - Background refresh of policy (ok to do slow stuff)
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_SLOWLINK - Policy is being applied across a slow link
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_VERBOSE - Verbose output to the eventlog
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_NOCHANGES - No changes were detected to the Group Policy Objects
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_LINKTRANSITION - A change in link speed was detected between previous policy application and current policy application
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_LOGRSOP_TRANSITION - A change in RSoP logging was detected between the application of the previous policy and the application of the current policy.
2014-10-21 11:16:54.065 [pid=0x3e8,tid=0xcd0] ( X ) GPO_INFO_FLAG_FORCED_REFRESH - Forced Refresh is being applied. redo policies.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_SAFEMODE_BOOT - windows safe mode boot flag
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_INFO_FLAG_ASYNC_FOREGROUND - Asynchronous foreground refresh of policy
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Token (computer or user SID): S-1-5-18
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Abort Flag : Yes (0x313be090)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] HKey Root : Yes (0x80000002)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Deleted GPO List : No
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Changed GPO List : Yes
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Asynchronous Processing : Yes
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Status Callback : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] WMI namespace : Yes (0x32273740)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] RSoP Status : Yes (0x320cc7f4)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Planning Mode Site : (none)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Computer Target : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] User Target : No (0x00000000)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Calculated list relevance. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ----- Changed - 0
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Options : ( ) GPO_FLAG_DISABLE - This GPO is disabled.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPO_FLAG_FORCE - Do not override the settings in this GPO with settings in a subsequent GPO.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Options (raw) : 0x00000000
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] Version : 19267878 (0x01260126)
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPC : LDAP://CN=Machine,CN={GUID-2},CN=Policies,CN=System,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPT : \\SITE.DOMAIN\sysvol\SITE.DOMAIN\Policies\{GUID-2}\Machine
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Display Name : Default Domain Policy
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Name : {GUID-2}
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] GPO Link : ( ) GPLinkUnknown - No link information is available.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkMachine - The GPO is linked to a computer (local or remote).
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkSite - The GPO is linked to a site.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( X ) GPLinkDomain - The GPO is linked to a domain.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GPLinkOrganizationalUnit - The GPO is linked to an organizational unit.
2014-10-21 11:16:54.081 [pid=0x3e8,tid=0xcd0] ( ) GP Link Error
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] lParam : 0x00000000
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Prev GPO : No
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Next GPO : Yes
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Extensions : [{00000000-0000-0000-0000-000000000000}{GUID-3}][{GUID-1}{GUID-3}][{GUID-4}{GUID-5}{GUID-6}{GUID-7}{GUID-8}][{GUID-9}{GUID-10}][{GUID-11}{GUID-5}{GUID-6}]
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] lParam2 : 0x3146f978
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Link : LDAP://DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Purge GPH : C:\ProgramData\Microsoft\Group Policy\History\{GUID-2}\Machine\Preferences\Groups\Groups.xml
2014-10-21 11:16:54.096 [pid=0x3e8,tid=0xcd0] Read GPE XML data file (592 bytes total).
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ----- Changed - 1
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Options : ( ) GPO_FLAG_DISABLE - This GPO is disabled.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPO_FLAG_FORCE - Do not override the settings in this GPO with settings in a subsequent GPO.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Options (raw) : 0x00000000
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Version : 1245203 (0x00130013)
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPC : LDAP://CN=Machine,CN={GUID-12},CN=Policies,CN=System,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPT : \\SITE.DOMAIN\sysvol\SITE.DOMAIN\Policies\{GUID-12}\Machine
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Display Name : Default Domain Controllers Policy
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Name : {GUID-12}
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] GPO Link : ( ) GPLinkUnknown - No link information is available.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkMachine - The GPO is linked to a computer (local or remote).
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkSite - The GPO is linked to a site.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GPLinkDomain - The GPO is linked to a domain.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( X ) GPLinkOrganizationalUnit - The GPO is linked to an organizational unit.
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] ( ) GP Link Error
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] lParam : 0x00000000
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Prev GPO : Yes
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Next GPO : No
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Extensions : [{00000000-0000-0000-0000-000000000000}{GUID-3}][{GUID-1}{GUID-3}][{GUID-9}{GUID-10}]
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] lParam2 : 0x324e8198
2014-10-21 11:16:54.112 [pid=0x3e8,tid=0xcd0] Link : LDAP://OU=Domain Controllers,DC=SITE,DC=DOMAIN
2014-10-21 11:16:54.127 [pid=0x3e8,tid=0xcd0] Purge GPH : C:\ProgramData\Microsoft\Group Policy\History\{GUID-12}\Machine\Preferences\Groups\Groups.xml
2014-10-21 11:16:54.127 [pid=0x3e8,tid=0xcd0] Read GPE XML data file (592 bytes total).
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Completed get next GPO. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] WQL : SELECT * FROM RSOP_PolmkrSetting WHERE polmkrBaseCseGuid = "{GUID-1}"
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Purged 2 old RSoP entries.
2014-10-21 11:16:54.143 [pid=0x3e8,tid=0xcd0] Logging 2 new RSoP entries.
2014-10-21 11:16:54.159 [pid=0x3e8,tid=0xcd0] RSoP Entry 0
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] RSoP Entry 1
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] Completed get GPO list. [SUCCEEDED(S_FALSE)]
2014-10-21 11:16:54.174 [pid=0x3e8,tid=0xcd0] IsRsopPlanningMode() [SUCCEEDED(S_FALSE)]
2014-10-21 11:17:04.252 [pid=0x3e8,tid=0xcd0] Completed settings update (csePostProcess). [ hr = 0x800700b7 "Cannot create a file when that file already exists." ]
2014-10-21 11:17:04.252 [pid=0x3e8,tid=0xcd0] Completed CSE post-processing. [ hr = 0x800700b7 "Cannot create a file when that file already exists." ]
2014-10-21 11:17:04.267 [pid=0x3e8,tid=0xcd0] Leaving ProcessGroupPolicyExLocUsAndGroups() returned 0x000000b7

Difference between group by roll up and group by cube

Please let me know with an example for the difference between group by roll up and group by cube.
thanks,
Vinodh

http://download.oracle.com/docs/cd/B19306_01/server.102/b14223/aggreg.htm#sthref1601

New files and folders on a Linux client mounting a Windows 2012 Server for NFS share do not inherit Owner and Group when SetGID bit set

Problem statement
When I mount a Windows NFS service file share using UUUA and set the Owner and Group, and set the SetGID bit on the parent folder in a hierarchy. New Files and folders inside and underneath the parent folder do not inherit the Owner and Group permissions
of the parent.
I am given to understand from this Microsoft KnowledgeBase article (http://support.microsoft.com/kb/951716/en-gb) the problem is due to the Windows implmentation of NFS Services not supporting the Solaris SystemV or BSD grpid "Semantics"
However the article says the same functionality can acheived by using ACE Inheritance in conjunction with changing the Registry setting for "KeepInheritance" to enable Inheritance propagation of the Permissions by the Windows NFS Services.
1. The Precise location of the "KeepInheritance" DWORD key appears to have "moved" in Windows Server 2012 from a Services path to a Software path, is this documented somewhere? And after enabling it, (or creating it in the previous
location) the feature seems non-functional. Is there a method to file a Bug with Microsoft for this Feature?
2. All of the references on demonstrating how to set an ACE to achieve the same result "currently" either lead to broken links on Microsoft technical websites, or are not explicit they are vague or circumreferential. There are no plain Examples.
Can an Example be provided?
3. Is UUUA compatible with the method of setting ACE to acheive this result, or must the Linux client mount be "Mapped" using an Authentication source. And could that be with the new Flat File passwd and group files in c:\windows\system32\drivers\etc
and is there an Example available.
Scenario:
Windows Server 2012 Standard
File Server (Role)
+- Server for NFS (Role) << -- installed
General --
Folder path: F:\Shares\raid-6-array
Remote path: fs4:/raid-6-array
Protocol: NFS
Authentication --
No server authentication
+- No server authentication (AUTH_SYS)
++- Enable unmapped user access
+++- Allow unmapped user access by UID/GID
Share Permissions --
Name: linux_nfs_client.host.edu
Permissions: Read/Write
Root Access: Allowed
Encoding: ANSI
NTFS Permissions --
Type: Allow
Principal: BUILTIN\Administrators
Access: Full Control
Applies to: This folder only
Type: Allow
Principal: NT AUTHORITY\SYSTEM
Access: Full Control
Applies to: This folder only
-- John Willis, Facebook: John-Willis, Skype: john.willis7416

I'm making some "major" progress on this problem.
1. Apparently the "semantics" issue to honor SGID or grpid in NFS on the server side or the client side has been debated for some time. It also existed as of 2009 between Solaris nfs server and Linux nfs clients. The Linux community defaulted to declaring
it a "Server" side issue to avoid "Race" conditions between simultaneous access users and the local file system daemons. The client would have to "check" for the SGID and reformulate its CREATE request to specify the Secondary group it would have to "notice"
by which time it could have changed on the server. SUN declined to fix it.. even though there were reports it did not behave the same between nfs3 vs nfs4 daemons.. which might be because nfs4 servers have local ACL or ACE entries to process.. and a new local/nfs
"inheritance" scheme to worry about honoring.. that could place it in conflict with remote access.. and push the responsibility "outwards" to the nfs client.. introducing a race condition, necessitating "locking" semantics.
This article covers that discovery and no resolution - http://thr3ads.net/zfs-discuss/2009/10/569334-CR6894234-improved-sgid-directory-compatibility-with-non-Solaris-NFS-clients
2. A much Older Microsoft Knowledge Based article had explicit examples of using Windows ACEs and Inheritance to "mitigate" the issue.. basically the nfs client "cannot" update an ACE to make it "Inheritable" [-but-] a Windows side Admin or Windows User
[-can-] update or promote an existing ACE to "Inheritable"
Here are the pertinent statements -
"In Windows Services for UNIX 2.3, you can use the KeepInheritance registry value to set inheritable ACEs and to make sure that these ACEs apply to newly created files and folders on NFS shares."
"Note About the Permissions That Are Set by NFS Clients
The KeepInheritance option only applies ACEs that have inheritance enabled. Any permissions that are set by an NFS client will
only apply to that file or folder, so the resulting ACEs created by an NFS client will
not have inheritance set."
"So
If you want a folder's permissions to be inherited to new subfolders and files, you must set its permissions from the Windows NFS server because the permissions that are set by NFS clients only apply to the folder itself."
http://support.microsoft.com/default.aspx?scid=kb;en-us;321049
3. I have set up a Windows 2008r2 NFS server and mounted it with a Redhat Enteprise Linux 5 release 10 x86_64 server [Oct 31, 2013] and so far this does appear to be the case.
4. In order to mount and then switch user to a non-root user to create subdirectories and files, I had to mount the NFS share (after enabling Anonymous AUTH_SYS mapping) this is not a good thing, but it was because I have been using UUUA - Unmapped Unix
User Access Mapping, which makes no attempt to "map" a Unix UID/GID set by the NFS client to a Windows User account.
To verify the Inheritance of additional ACEs on new subdirectories and files created by a non-root Unix user, on the Windows NFS server I used the right click properties, security tab context menu, then Advanced to list all the ACEs and looked at the far
Column reflecting if it applied to [This folder only, or This folder and Subdirectories, or This folder and subdirectories and files]
5. All new Subdirectories and files createdby the non-root user had a [Non-Inheritance] ACE created for them.
6. I turned a [Non-Inheritance] ACE into an [Inheritance] ACE by selecting it then clicking [Edit] and using the Drop down to select [This folder, subdirs and files] then I went back to the NFS client and created more subdirs and files. Then back to the
Windows NFS server and checked the new subdirs and folders and they did Inherit the Windows NFS server ACE! - However the UID/GID of the subdirs and folders remained unchanged, they did not reflect the new "Effective" ownership or group membership.
7. I "believe" because I was using UUUA and working "behind" the UID/GID presentation layer for the NFS client, it did not update that presentation layer. It might do that "if" I were using a Mapping mechanism and mapped UID/GID to Windows User SIDs and
Group SIDs. Windows 2008r2 no longer has a "simple" Mapping server, it does not accept flat text files and requires a Schema extension to Active Directory just to MAP a windows account to a UID/GID.. a lot of overhead. Windows Server 2012 accepts flat text
files like /etc/passwd and /etc/group to perform this function and is next on my list of things to see if that will update the UID/GID based on the Windows ACE entries. Since the Local ACE take precedence "over" Inherited ACEs there could be a problem. The
Inheritance appears to be intended [only] to retain Administrative rights over user created subdirs and files by adding an additional ACE at the time of creation.
8. I did verify from the NFS client side in Linux that "Even though" the UID/GID seem to reflect the local non-root user should not have the ability to traverse or create new files, the "phantom" NFS Server ACEs are in place and do permit the function..
reconciling the "view" with "reality" appears problematic, unless the User Mapping will update "effective" rights and ownership in the "view"
-- John Willis, Facebook: John-Willis, Skype: john.willis7416

Server 10.5.7 upgrade deleted all user and group Info -- Receiving error -1

After upgrading our Dual 2.0 G5 server that was running 10.5.6 to 10.5.7 all groups and user information lost access. In addition when starting the workgroup manager error -14008 appears. Also when we look into the console log the following shows up
------------com.apple.launchd[1] (edu.mit.kadmind) Throttling respawn: Will start in 10 seconds
over and over
Any help would be greatly appreciated.

I looked into A&I more, maybe it's not as nuclear as I thought. I presumed it meant I needed to reinstall all non-apple Apps, which means digging up disks and codes, none of which I have here. I'm away from home for another 4 weeks, which means doing that is difficult.
Being away is also why my back-up is a little out of date, I didn't bring the time machine drive for that MBP with me. I had it shipped to me as soon as I had problems, but the back-up I'd have to roll back to is now 1-2 weeks old and might still have the funky user:group problems since my timezone problems began before the 10.5.7 update.
I think DiskWarrior may of finally repaired the user:group issues. Not 100% sure but it's looking better. I just noticed that the primary user is admin but User is 502 and Group is 502. Whereas my secondary user account (also Admin) on that MBP User is 501 and Group is 20. My recollection is 20 is staff and both users groups should be 20.
I'll look into A&I more, probably do it when I get home.
Thanks.
Message was edited by: jb510

Portable Wireless Server WG-C10 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x

The Portable Wireless Server WG-C10 I purchased in 2014 doesn't stream any audio and some video content after updating phone to Android Lollipop 5.x.
The WG-C10 firmware is the last version which is available and the PWS Manager software is the last version available in Google Play Store.
There are no updates for the WG-C10 firmware nor PWS Manager software since 2013 or for Android 5.x (Lollipop) and I don't know if the WG-C10 firmware is the problem or if the PWS Manager software is the problem.
BTW, I am still able to stream this content on my tablet which is on KitKat (4.4.x) so the files are not corrupted. The only problem is with Lollipop.
PWS Manager in the Google Play Store says it supports Android 4.0+ which is no longer true.
The audio file formats which fail to stream are: mp3 and wav
The video file formats which fail to stream are: mp4, avi and 3gp
JPEG Images appear to work fine, but I haven't tried other formats.
I purchased the WG-C10 to stream audio and video primarily to my phone and now that this no longer works, the WG-C10 is useless to me.
Any ideas?

Hi juicespeare1,
Welcome to the Sony Community!
Upon checking your inquiry, the best division to respond to your concern is our Sony Mobile department.
You can reach them at this site: http://www.sonymobile.com/global-en/support/contact-us/contact-info/.
If my post answers your question, please mark it as "Accept as Solution"

Group Chart Of Accounts and Group Account Number

Hi SAP Gurus,
For the sake of consolidated reporting, we are planning to create group chart of accounts and assign a Group account number to the GL account master. The structure is going to be like this:
Operating Expenses (Group Account : 461000).
Air Conditioning Exp   (GL account 461000001)
Elevators                   (GL account 461000002)
Coffee and snacks      (GL account 461000003)
This is being done to achieve a detail level reporting at the company code level and a consolidated reporting at a group level where the reporting would be based on group account or FSIs. We would define a financial statement version based on FSIs.
My question is : do we need to activate the consolidation (EC-CS) module to push the data to the FSIs or the data would flow automatically to the group account if we assign this to the GL master. If we go to fetch the data from the ECMCT table, do we need to have a consolidation unit?
Any inputs are highly appreciated.
thanks
sri

Hi,
There are certain preliminary steps to be carried out in ECCS. You can find them under SPRO->Enterprise Controlling->Consolidation->Integration: Preparation for Consolidation.
You need to choose the type of consolidation, create Company, link it to Cons Unit in ECCS, Creating/Copying FS Items (each account in Group COA will have an FS Item; 1:1), etc.,
After the setup, you actually need to carry out Rollup or Flexi Upload for importing FI data into ECCS FS Items. This is done to Data Monitor - CXCD.
In ECMCT, typical selections would be Dimension, Cons Unit, Cons COA, FS Item.
I suppose these preliminary steps are requried for the data to flow to FS Items.
Hope this clarifies.
Rgds.

How can i make 2 combo boxes as the same data source and group by each combo box items separately?

I have 2 combo boxes If I have data table like below
TableA
ID NAME
1 A
2 B
3 C
4 A
I make "TableA" as data source of "combobbox1" and "combobox2" like
combobox1.datasource = TableA
combobox1.displaymember = "ID"
combobox2.datasource = TableA
combobox2.displaymember = "Name"
I want when combobox2 select index at "A" , Combobox1 show only the items at ID = 1 And ID = 4
Thanks

This is not actually a question to be posted in SQL Server. Here is a link for ASP.NET forum.
http://forums.asp.net/
It looks like there is a filter that can be applied in .NET dataset and populate the results in your combobox1. You may get better help from .NET forums for this question.

Can Drill-down paths being made dependent on the user roles and groups

Hello Experts
Is it possible to restrict user after certain level of drill down. Here I mean after drilling upto country level from Total World , can we restrict the user to further drill down upto state level.
OR we can say that we need to restrict certain user to look into transaction level details
thansk and appreciate any hlep on this.

i Guess u can...by setting object level security? suppose if you dnt want to drill to state... you can restrict the state column inpresentation laye... so when the user uses the the report he cannot see state and also in drill down....hope this is helpful/answered...

Event 4098, Group Policy Local Users and Groups

Hello,
A few of our computers on the network are not replacing the local "Administrator (built-in)"account with our administrator account we set up through Group Policy. I recieve the follow error message from the Applicaiton Logs. I'm
not sure if this error is a PC issue instead of a Group Policy issue, because Group Policy seems to be working fine on our other PCs. Any suggestions/ideas would be helpful. Thank you.
Error message: The computer "Administrators (built-in) preference item in the "Security Policies {CD8199AF-99A8-41F8-8D28-C92DD9C57A51}" Group Policy object did not apply because it failed with error code '0x80070526 The specified group policy
already exists.' This error was suppressed.

Hi,
It seems that you have configured this security policy already, you can try run GPupdate /force command and then check if all security policies are applied in your computer:
Resultant Set of Policy
http://technet.microsoft.com/en-us/library/cc772175.aspx
you can use this command to retrieve the specific group policy:
http://technet.microsoft.com/en-us/library/ee461059.aspx
If you have any feedback on our support, please click
here
Alex Zhao
TechNet Community Support

How can you make the iPod tell the diff between a movie and music video

Greetings!
How can you make iPod tell the difference between a Music Video and Movie? Everything I put up on the iPod falls into Movie. So is it something I have to do in iTunes?
Thanks for the help!

Rightclick the video in iTUnes, hit Get info then the "Options" tab. Beside kind you can set it to movie. music video. or TV show

How to reset users and groups in Server.app?

Recently after change settings in the Server.app (like turn off/on open directory, delete/add certificates), I got a strange problem:
In the users and groups list, it display all local users and groups (looks like system users and groups, about 100 users and groups, but this is a new server)
I tried reset the server.app by following
howto reinstall/reinitialize os x server
http://support.apple.com/kb/HT200271?viewlocale=en_US
These users and groups still showing there.
Have you seen this before and how can I completely reset the server.app to factory default so that I can start over the set up?

In theory, that should restore the users. You can do some surgery if you are really brave. But the reinstall generally should be enough.
These accounts are in the DSLocal data store. Basically, this is very similar to the any OS X machine. Apple keeps a default copy of the Local Database here:
/System/Library/DirectoryServices/DefaultLocalDB/Default
Should you need to reset a machine to the default local database, you can remove the current database (/var/db/dslocal/nodes/Default) and then copy the default one to the same location. I would not go this far unless the reinstall was unsuccessful.
To check, you can run this command:
dscl . list /Users
That will list all the Users in the local DB. To get a count, pipe to wc
dscl . list /Users | wc -l
On a Server that I just jumped on, I see 79 users and 111 groups (dscl . list /Groups | wc -l) But this is a system will man SACL groups so I likely have more than the default.
Hope this continues to help. Probably more info that you want.
Reid
Apple Consultants Network
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store
Author "Mavericks Server – Control and Collaboration" :: Exclusively available in Apple's iBooks Store

Lync 2013 Edge Server - Lync Server Audio/Video Edge Don´t respond

Hello, We have a Lync 2013 Infraestructure. (With Windows 2008 R2)
3 front ends servers (pool) and 1 edge server.
We have an issue with the edge server. Often we lost the Presence , IM and Audio/Video with external/federated contacts
We can´t chat or do any calls.
When we try to restart the service "Lync Server Audio/Video Edge" in the Edge, it never stop...
We try to kill the process MediaRelaySvc.exe without success.
The only way is to restart the server.
The server is up to date with the lastest hotfixes.
There are not events in APP/SYSTEM/LYNC logs in the event viewer.
Any idea ?
Thanks in advance!

Hi,
Please also check if there is any error message on FE Server.
Please make sure the CMS replication is update to the latest status on Edge Server.
Please make sure there is no other antivirus software in Edge Server as Anthony said above.
Please also double check the Edge certificate/DNS is setting suitable.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

How to change default /Users and /Groups to different Volume?

Users are created in /Volumes/<boot>/Users and groups in /Volumes/<boot>/Groups.
We need these to be created on a different volume, eg., /Volumes/External/Users, and /Volumes/External/Groups.
Setup Assistant correctly put user Backups into */Volumes/External/Shared Items/Backups* and also correctly put web services on /Volumes/External/ServiceData -- we want to do the same for Groups and Users.
Groups are the most critical, as the group needs bulk storage. Users we could leave as is if it can't be done.
How can this be configured? We've read File Server Admin, Open Directory Admin, and Advanced Server admin from http://www.apple.com/server/macosx/resources/documentation.html without finding an answer.
Thanks in advance.

1. Create new folders on the external volume to hold users and groups, but to prevent confusion name them something other than "Users" and "Groups". /Volumes/External/NetUsers and /Volumes/External/NetGroups would be reasonable choices.
2. Share both of these folders (in Server Admin -> server name in sidebar -> File Sharing -> Volumes & Browse modes -> select each folder -> click Share near the top right).
3. Enable both folders for automounting on clients (Server Admin -> server name in sidebar -> File Sharing -> Share Points-> select each folder -> Share Point tab under that -> Enable Automount option) with the default options (Directory: /LDAPv3/127.0.0.1, Protocol: AFP, Use for: User home folders and group folders). Be sure to click Save (not just OK in the dialog).
4. To migrate users, run Workgroup Manager, and change the home location for the users you want to move (select Accounts in the toolbar -> /LDAPv3/127.0.0.1 from the hidden pop-up menu under that -> User icon tab at the left -> select the user(s) you want to change -> Home tab on the right -> select the NetUsers option from the "Where" list). Then, for each user, run this command on the server: "sudo cp -Rp /Users/username /Volumes/External/NetUsers".
5. Similarly, move Group folders in WGM (Accounts -> /LDAP... -> Groups icon on left -> select groups to move -> Group Folder tab on right -> NetGroups in the list). Then, for each group, run "sudo cp -Rp /Groups/groupname /Volumes/External/NetGroups".
6. Test to make sure all is working before deleting the old user and group folders from /Users and /Groups (do NOT delete /Users and /Groups themselves, just the individual folders from under them).

Huge list of Groups in Users and Groups

I just upgraded SL to ML. I've been learning and setting things up.
I use the machine as a standard user and I have a "silent" admin user, too.
I was wondering if anyone has come across this? I went into System Preferences and noticed that there was a HUGE list of Groups. Some had "logical" names like admin server, etc. The list was super long. Some of the name were strange, like "umbg" I have no idea how they got there. And, searching here, and googling doesn't give me any info.
I don't know how all these groups got there. I did not add a single one.
I did make a mistake, because I deleted them all and then ML made my admin user a standard user and I could not unlock System Preferences, or use my password anywhere. ugh.
I tried finding a way to fix it, but I ended up just using Restore from disk utility. no worries, didn't have that much going on, yet.
Is it normal to have a list of groups that you did not create? Does ML just create groups in your Users and Groups list??
How do I take care of it if it happens again? Can some be deleted? If so, which ones? What are they for?
Thanks for any help with this.

Okay, I did do the restore.
And, the groups were not there.
So, first off, I opened TinkerToolSystem and went through all thes options. I found one: Show Groups in users and groups. I made sure it was not checked. Hopefully, it will not repopulate.
Then I remembered something. I did download Onyx. I was just looking for a way to change something simple. Mostly, I just looked around, didn't click on buttons, etc. But, Onyx may have change this setting (or me using Onyx inadvertently). Whichever, whatever, I've used TinkerToolSystem for years and it's always worked so well. I think I'm sticking with it and not install Onyx - which I had to go through the Gatekeeper exception deal... so it makes me nervous.
I'll post back if further issues with this.

Can OS X server xmpp server do group chats, video chats and group video chats??

Similar Messages

Maybe you are looking for