Can P4N Diamond core-center allow auto shut down if cpu temp hits 70*C?

I read the Core-Center will allow temp-based warnings and shut down.    Does that mean really it will shut itself down automatically if a tempo hits a certain level?    this would be a great feature
thanks!

CoreCenter don't depend on it. Force shutdown PC is obsolete way, it cause you lose data, it's a idea. Forget about it. And forget about CoreCenter too. Let the Processor handle thermal itself.

Similar Messages

  • When I use safari I keep getting a small coloured circular icon which in turn does not allow me to navigate at all.  the only way I can get rid of it is to shut down and reboot.  Can anyone help?

    When I use safari I keep getting a small coloured circular icon which in turn does not allow me to navigate at all.  the only way I can get rid of it is to shut down and reboot.  Can anyone help?

    Start here.

  • Can you make core center automatically close after being called on startup?

    Can you make core center automatically close after being called on startup so it can set cpu fan speed to a slower fixed speed then exit?
    If core center really cant do such a simple task then can speedfan or another program?

    Quote from: bassmadrigal on 13-July-05, 07:42:36
    Why don't you want them running. Speedfan has a very small footprint.
    Just seems unnecesary seeming as it does its task as soon as it runs and its changes then stay applied. Speed fan is probably better but core center takes 10mb.
    Quote from: syar2003 on 13-July-05, 07:57:02
    You dont have to have it running to set a user specified fan rpm .
    Once it's set it is stored in the corecell/cmos chip on the motherboard .(until a cmos reset) .
    So to answer your question .
    There is no need to have it autostarted at each boot ...
    Thats how i have used it .
    Only reason to have it running is with MSI's "CnQ" control of the fan , varies with the load of the processor
    Thats strange for me the speed resets to default as soon as I restart my pc (about when the bios engages which is however tangibly after the graphics card fan revves up to its full speed). Depending on the temperature of the proccessor it goes to 3300rpm (less than 42c) or 4500rpm (too loud for ~45c IMO and MSIs "cool&quiet" option seems to agree, it doesn't even set it as high as 3300rpm)

  • Auto shuts down - could it be the power adapter?

    I'm having problems with my first generation macbook lately, it will auto shuts down (not sleep) with the power adapter still attached. And when it shuts down, the adapter still light up green. Im working without the battery, it is removed all the time cos it is dead already.
    Could the problem lies with the power adapter? but it's still shows green light, that means there is still power running thru? I would like to test with another power adapter but i don have friends who have a mac. I don't want to spend money one another power adapter, without knowing the cause.
    Is it possible to do a test on the power adpater? thanks!

    A test you could try (rather than another adapter) is to put the "dead" battery back in and run it on AC. As Gregory said, without the battery, the slightest knock to the magsafe connecter may cause it to disconnect, even momentarily, thus you lose all power and your MB turns off. Hopefully the battery will have enough capacity to allow the MB to stay on (briefly) when the connecter is disconnected for that moment. Just an idea.
    Good luck.

  • Nokia Auto shutting down problem

    Since last week my 5800 shuts down like crazy.
    1 time it shuts down like after 10 seconds when started up
    then after 50 mins...
    I have the latest firmware installed.
    Already hard resetted the thing.
    I did notice something:
    When I took the sim card out and rebooted the phone, it didnt auto-shut down anymore
    Put the card back in, the same **bleep** again.
    Tried different sim cards but all managed to shut down the phone
    anything to solve this ?

    hmm could have something to do with the connectors, might be a hardware issue. take it to nokia care and see what they might say. if it works ok without sim, and not with it, it might be a communication issue between the device and sim
    You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

  • Mac Mini auto shuts down shortly after startup chime...what should I do? Thanks.

    Our boss brought a mac mini model A1176 from the US to be used by her staff here in the Philippines. We powered it up- everything was working. Then it just stopped working after onen day. Whenever it is powered up, the mac mini auto shuts down shortly after the startup chime. What's wrong. How can we fix it? Thanks a lot.

    Troubleshooting: My computer won't turn on
    Mac doesn't boot

  • Is it possible to stop auto shut down whilst downloading?

    Is it possible to stop auto shut down whilst downloading?

    Hello
    Automatic shutdown function is not known to me on Windows Do you mean standby or hibernation mode?
    If yes this can be disabled in Windows Power Management options.

  • Anyway to auto shut down iTunes at specified time?

    Hi my iTunes library stored on a NAS. The NAS is set to sleep overnight.
    However if I leave my iTunes on my iMac open, the NAS doesnt auto mount, and then iTunes has loads of errors, cant save file, cant locate iTunes library etc etc. I have to close iTunes, remount NAs (use CMD-K, chose the share), then re-open iTunes. So 2 questions...
    1) Is there someway I can auto shut down iTunes at a specified time, ie before my NAS goes to sleep, even if my iMac is asleep or is this impossible?
    2) How can I auto mount my NAS share, so every morning when the NAS comes awake, it aut mounts. I leave my iMac on all the time, but it goes to sleep, and just use one log in, ie its always logged in.
    cheers

    lune:
    Lots of questions. I'll try to get to at least a few now.
    I am doing the repairs on HD volume rather than the 74.4gb Hitachy, never been sure which one to choose)
    When working in Disk Utility, both for Repair Disk and Repair Disk Permissions, you want to select the Manufacturer's ID, instead of the volumne name. You want to work with the volume on the HDD, as the directory is built into the HDD.
    Would you say that I should consider the idefrag solution to keep things running smoothly?
    Here's what Apple says About disk optimization with Mac OS X. That said, I do a complete disk optimization at least monthly, sometimes twice. I use Tech Tool Pro. It's one of the best all round utilities out there. DriveGenius is supposed to be pretty good, too, but I am not personally familiar with it. It is the one utility that I have heard reported to do repartitioning on the fly successfully.
    I'll return to you other questions later.
    Good luck.
    cornelius

  • Can I use apple configurator to automatically shut down iPads to preserve my school's bandwidth?

    Can I use apple configurator to automatically shut down iPads to preserve my school's bandwidth?

    No, not if you mean remotely. Configurator does not allow any sort of remote control of the iPads. It's only for setting them up when connected to your master computer. There may be third-party MDM systems that might offer some such remote control over WiFi connections, though I can't tell you any that do.  This of course will not work on any iPad that's not in your control (usually ones that the school owns) and can get set up with the MDM solution. If you're concerned about iPads and other devices that the students own personally, you may need to control your WiFi access points instead.
    Regards.

  • How to disable auto shut down when doing line-in recordi

    I am using Zen V Plus 6gb to do li've line-in mic recording.
    I experience creation of a few tacks when the recording ends.
    When I asked Creative Tech, they said it is auto shut down when the voice recorded falls below audible level. Can I disable this?

    If I got you right, it interrupts the recording when a period of seconds no signal more loud than a certain level is
    on the line-in source? Right? Normally you could aplify anything, even white noise, but I don't get the point.
    Are there any songs that have longer interruptions than 5 seconds according to this cd norm?

  • AutoTrim & Include Subfolders From A Folder & Preserve Subfolder Structure & Auto Shut Down Computer - ALL In Batch Processing Mode And Match Volume Mode ?

    Hi! I salute you all!
    First of all I want to excuse my english (it's not my native language)!
    In 2014 we are dealing with thousands of files (video, audio, etc.), because of the present powerful technology, still... we are missing very important and useful parts for doing our jobs properly and very quickly!
    In this case is Adobe Audition too, in my oppinion!
    Adobe Audition is a great program, which help us to edit in many ways our audio files, but... unfortunatelly has major missing parts, which would be nice to be implemented as soon as possible!
    Some of them are are right below this line:
    1. AutoTrim (for removing silences from audio files, before and after)
    2. Include Subfolders From A Folder (when adding a folder for working with, we should have the possibillity to add its subfolders too)
    3. Preserve Subfolder Structure (when exporting a folder with its all subfolders, we should have the possibillity to export the exact structure like the original)
    4. Auto Shut Down Computer (when all the tasks/jobs are done, we should be able to auto close the program and auto shut down our desktop/laptop as well)
    When you will add these features which are so wanted, to have them all in Batch Processing mode and Match Volume mode as well, please?!
    Many other audio softwares have all of these "old" possibillities, like "GoldWave" for instance (I am not advertising it at all), but the Adobe Audition which is more complex...doesn't so far!
    I thank you all and I really wait for these very next future feature requests!
    Have a nice day!
    P.S.: Is this message/question read by Adobe stuff members (persons who can take decissions in this way) too, or only by us, the comunity members?!

    Hello Kavans,
    Thank you for the details of the issue you are experiencing with your MacBook Pro.  I recommend reviewing the following article for this issue:
    Mac OS X: Why your Mac might not sleep or stay in sleep mode
    http://support.apple.com/kb/HT1776
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • I can't start AE. Ae always shuts down. There is a Problem with the "AEDynamiclinkServer". I tried everything. But it doesn't work. How do I get AE back to work?

    I can't start AE. Ae always shuts down. There is a Problem with the "AEDynamiclinkServer". I tried everything. But it doesn't work. How do I get AE back to work?

    What "everything" have you tried?
    What exact version number (down to the last decimal) is your AE?
    What OS are you using?
    What are your other system specs?
    When did it work last? What happened between then and now?
    FAQ: What information should I provide?

  • My ipad is freez...it only show a home screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.

    my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.

    Have you tried to reset it? Hold down the sleep and home keys for about 20 seconds and see if you can get it to reboot.

  • My ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.

    my ipad is freez...it only show a fome screen. but i can turn off my ipad but not shut down...and i went to my computer and i go to itune. i try to restart my ipad but it say turn off your.find my iphone..but i cant my ipad is freezing.can help me plz.plz help me.................thx u

    Option 1
    Try force iPad into Recovery Mode. Follow step 1 to 6 very closely.
    http://support.apple.com/kb/HT1808
    Note: You need to be patient and repeat the above many times to recover your iPad

  • How come when i press the sleep on my MBP it auto shut down?

    How come when i press the sleep on my MBP it auto shut down?

    Pressing the Power Button brings up a dialog: "Restart Sleep Cancel Shut down (default button).
    Teddy Mack; are you just giving the Power Button a light touch, or holding it down?

Maybe you are looking for

  • Space button on Treo Pro (sprint) takes me back to Home

    Hello, I just had an odd thing happen yesterday.  When I looked at my phone, some settings were changed - my digital clock display for time got set to analog.  I switched it back thinking it wasn't a big deal.  Anyway later when I try to text, every

  • IWork install asking for serial number even though installed from disc set

    Ok so two days ago I bought a MacBook Pro from Best Buy. It was one of those open package deals. Anyhow the MacBook was missing the software. I decided it might be a good idea to buy the Mac Box Set at the local Apple Store because I might need the O

  • ASN in Extended Classic Scenario with SUS

    Hi SRMer? Is it possible to create an ASN in SUS with Extended Classic Scenario (ECS)? OSS note 543544 mention that the scenario is limited for document types Purchase Order, Purchase Order Response and Change Order. Confirmations and invoices are no

  • Is it allowed to make a rmi call from within an ejb??

    Hello, Am I allowed to make a rmi call from within an ejb such as: String host = "localhost"; RemoteObject ro = (RemoteObject) Naming.lookup("rmi://"+host+"/MonServeur"); ro.myMethod(); package pack; import java.rmi.Naming; import java.rmi.RemoteExce

  • Oracle Client for Windows 2008 R2

    is there a 10g or 11g cleint available for Windows 2008 R2? The latest Win64 or Windows 2008 clients all give me an error that saus it supports versions up to 6.0 and I have version 6.1