Can Pages 4.3 maintain defined text formatting for at a given list level?

I'm hoping the answer to this question is a simple 'duh' solution that I some how over looked. I'm using Pages 4.3 and I am trying to create a tiered list to organize ideas into different sublevels. I want to be able to write at a particular level, then create sub levels (return -> tab) with different formatting so the levels are easily distinguished at a glance. When I move back to the higher levels (return -> shift + tab), Pages maintaines the text formatting I used at the lower level, rather than returning to the previously used format at the higher level. For example, what I want is ....
Main 1             --- (Return -> Tab)
Sub 1             --- (Return -> Shift +Tab)
Main 2
What I get is...
Main 1             --- (Return -> Tab)
Sub 1             --- (Return -> Shift +Tab)
Main 2
This means that anytime I move up or down in the tiers of a list, I need to redefine the formatting for each new bullet. I tried creating my own list styles, but that does not appear to preserve changes made to fonts or sizes. This seems like such a simple function and time saver that I feel like I must be doing something wrong. It has been a while since I used pages, but I don't remember having these problems before. Does pages really require one to reset the formatting everytime the move between list levels?

Thanks Michael!
So your suggestion is to create the pricing in ECC and then download it in CRM...
Now tat would mean that first the mapping has to be performed in ECC for the existing paroducts and product category..then create pricing for those mapped prod. cat. in ECC and then download it to CR M..plz correct me if I am wrong...
regards,
Aneesh

Similar Messages

  • [svn] 3148: You can now use CSS styles to set the default text format for TextView.

    Revision: 3148
    Author: [email protected]
    Date: 2008-09-08 15:01:15 -0700 (Mon, 08 Sep 2008)
    Log Message:
    You can now use CSS styles to set the default text format for TextView. It no longer has any formatting properties. It supports the entire set of Gumbo text format styles.
    SkinnableComponent and Group now also support all these styles. However, skins such as ButtonSkin, TextInputSkin, and TextAreaSkin continue for now to specify instance styles on their TextBox, TextGraphic, and TextView, in order to give them a Gumbo look rather than a Halo look. So if you try setting, for example, the fontSize on the Application, it doesn't yet affect the text format of a Button, TextInput, TextArea, etc. unless you remove the instance style in the skin.
    Reviewer: Glenn
    Bugs: -
    QA: Lots of new stuff to test!
    Doc: No
    Modified Paths:
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextArea.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextInput.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/component/TextView.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/Group.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/core/SkinnableComponent.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/TextBox.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/TextGraphic.as
    flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/TextGraphicEle ment.as

    Nevermind guys - I did it using the 'rb_on.selected' command on the "on" radio button if the .txt file variable was "on", else the "off" radio button is selected.
    Thanks for taking a look though!
    Shaun

  • How can i save a data in text format

    how can i save a data in text format in labwindows cvi
    Message Edited by Tikoy on 04-14-2010 11:30 PM
    Solved!
    Go to Solution.

    Hi,
    If your data is in an array, the easiest way is to use the ArrayToFile function.
    It automatically creates a file and puts your data in it according to the format you provide.
    If you have individual samples that you need to write once in a while, you can either collect them into an array and then use ArrayToFile or open a file with fopen and write them as they are acquired with fwrite.
    Hope this helps, 
    S. Eren BALCI
    www.aselsan.com.tr

  • How to maintained the Text  language for CKF keyfigure

    Dear All,
    Please let me know how to maintained the text language for CKF I am using only keyfigures in CKF.
    Issue is text is not showing in Spain language when user exeuted the report (longin Spain) for CKF keyfigures .
    As per report design there are formuals and direct keyfigures and CKF has defined and we keep it under in Row struture in the report.
    After exeuted the report (Login Spain)Text has converted in all languages along with spain except for CKF keyfigures.
    Issue in text CKF's:
    There is a main  CKF (Cost) under this again we defined two sub CKF's those are total cost and average cost. We able to see the text in Spain language for Main CKF(cost) and also cheked in RSZELTTXT(Texts of reporting component elements) for the same.
    We can able to see the text in all languages for main CKF(cost) and enteries are there in RSZELTTXT table.
    We can see only  the text in english for  total cost and average cost and also enteris are there only in EN in RSZELTTXT table.
    It would help to me if any one can answer my question.
    Thanks in advance .
    Regards,
    MQ

    U can fetch the texts for the items using
    Read_text.
    Example:
        g_f_tdname = xvttp-vbeln.
        g_f_obj = p_obj.
        g_f_langu = 'DE'.
        REFRESH g_t_lines.
        CLEAR g_t_lines.
        CALL FUNCTION 'READ_TEXT'
             EXPORTING
                  id                      = p_var
                  language                = g_f_langu
                  name                    = g_f_tdname
                  object                  = g_f_obj
             TABLES
                  lines                   = g_t_lines
             EXCEPTIONS
                  id                      = 1
                  language                = 2
                  name                    = 3
                  not_found               = 4
                  object                  = 5
                  reference_check         = 6
                  wrong_access_to_archive = 7
                  OTHERS                  = 8.
        IF sy-subrc <> 0.
         MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
                 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        ENDIF.
    The Required fields are,
    Text-id ,language,name,object.
    Let me know if you further require help.
    Regards

  • How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?

    How do I drag an image or text box to the "workspace" off of my working file but where I can still see the image and text box for future use?
    When I drag the item off of the trifold that I am creating, it just disappears but I still want to use it.  I just need to move it out of the way to modify other portions of the document.
    thanks,
    C

    Add another page below the current one to use as a storage area. You can't use the grey area around the page for storing items you want to use later.
    Go to the Pages Menu>Provide Pages Feedback if you would like to request this feature be added in future versions.

  • Can't see HTML and Custom text format under data format tab in obiee.

    Hi,
    I want to add a java script to my report but I can't see HTML/Custom text format option under Data Format Tab--->"Treat Text as" menu.
    My report is a union report.
    For data column and numeric columns i can see custom option available but for text columns it is not visisble.
    Any idea why it is not showing and what should be done here.
    Any pointers are welcome.
    Please help,it is really urgent.
    Thank in advance!
    Edited by: 810008 on May 18, 2011 10:03 PM

    Hi,
    Select text column (varchar column) -> Treat Text as -> custom text format ->Remove @ (default) -> add [html]<script>sometext(‘@’)</script> followed by your javascript
    for eg:
    [html]<script>buildGoogleChart(‘@’)</script> <head> <script type="text/javascript"> function show_alert() { alert("Hello! I am an alert box!"); } </script> </head> <body> <input type="button" onclick="show_alert()" value="Show alert box" /> </body> </html>
    hope helps u.........
    cheers,
    Aravind

  • CS5 - Text format for classic text error

    will now have to re-edit every part.
    Clearly you can get around this by other formats but fact is if you have a document that has negative spacing dont open it in CS5 cause you
    This may have been in recent update.
    Flash now resets them when you open the file to 0, if you notice or not.
    when you have negative (-20) set in spacing, usually used when you have margins.
    Classic Text Error
    Flash CS5

    Here's a workaround.
    FixTextIndent is a class with static methods that
    provides a workaround for the Flash CS5 text formatting
    bug.  The Flash CS5 IDE will not remember the text
    indent setting for either static or dynamic text fields.
    We can set the indent in Actionscript for dynamic fields,
    so to use this class, convert your fields to dynamic,
    then set the left margin.
    When you call FixTextIndent methods, they will set
    the indent to the negative of the left margin.
    Gary Weinfurther, 12/17/2010
    package com.keysoft.util
        import flash.display.DisplayObject;
        import flash.display.DisplayObjectContainer;
        import flash.text.TextField;
        import flash.text.TextFormat;
        public class FixTextIndent
             Fixes the line indent of all dynamic text fields
             in a given display object container so that
             the indent is the negative of their left margin.
            public static function FixContainer(container:DisplayObjectContainer):void
                for(var i:int = container.numChildren - 1; i >= 0; --i)
                    var obj:DisplayObject = container.getChildAt(i);
                    if (obj is TextField)
                        FixTextField(obj as TextField);
             Fixes the line indent of a dynamic text field
             to the negative of its left margin
            public static function FixTextField(tf:TextField):void
                var format:TextFormat = tf.getTextFormat();
                if (format.leftMargin != null && format.leftMargin > 0)
                    format.indent = -(format.leftMargin as Number);
                    tf.setTextFormat(format);

  • How to define the format for numeric field ?

    Hello
    I have Amount field and I would to define the format to be ( XX.XXX,000 )
    How can I do this ??
    I'm new in ADF and need your help ..
    rgrds
    Edited by: moh3li_pal on Mar 1, 2010 8:05 AM

    i have the same problem i try with pattern "###,###.##" but the application adf is the inverse "###.###,##" , this a bug or the pattern errornious.??Hi Joaquin. This is not a bug, although this is a little difficult to explain without face-to-face communication :D The confusing thing here is the difference between the 'special pattern characters' and actual output characters (which are chosen based on your locale).
    If you check the Java DecimalFormat class (which provides the rules for formatting) you'll see the following:
    Using , in the pattern = Grouping separator
    Using . in the pattern = Decimal separator or monetary decimal separator
    According to your locale, the grouping separator is '.' and the decimal separator is ','. So the pattern you have specified does dictate that you should get the result you have found.
    You either need to change your locale settings (best option) or cheat by switching the , and . in your pattern.

  • How can I use the MPEG-2 DVD format for video rendering?

    I have been trying to make a DVD out of my brother's wedding footage, but I've run into a wall. I would like to render out my footage in the .M2V format (MPEG-2 DVD), but I'm not given the option to use it. The only MPEG format I'm given is the .H264, and that doesn't work as well. How can I install the .M2V codec?

    You should either:
    Render to a suitable production codec and then compress for DVD in your authoring application.Use the Render Cue to render a PhotoJpg at NTSC or PAL file using default frame sizes for your AE rendering composition, then drop in Encore for authoring.
    Open your AE project in Adobe Media Encoder, pick the composition you want to render from the list and pick the MPEG 2 for DVD preset.
    Open Adobe Encore, select File>Dynamic Link>Import After Effects Composition and then set up your timelines and menu's as you like and select Build DVD.
    All DVD authoring programs will compress standard def video in just about any format for DVD. After Effects, however, will not do multi-pass rendering which is required for high quality MPEG compression.

  • Format for certain columns in list view control

    I have a list view control and I would like to format the alignment for certain columns. I heard that the only way you can do this is by formatting the cells in excel. I tried this with no success. Can someone please give me step by step instructions on how to achieve this. I am currently allowing Xcelsius to handle my formatting for money. Is it possible to have Xcelsius handle the money formatting and have excel handle the alignment  formatting. I am open to whatever works at this point. Also I am using Xcelsius 2008 (Build Number 12,2,1,66).
    Much Thx

    Hi,
       In list view control you can format the entire row only, not a certain column.
       Go to property>Appearance>Text Tab>select Header>Format selected text->select the format.
      For width change: Property> Layout Tab>check custom column width the click the icon and enter width in pixel.
    Regards,
    Senthil K

  • Build text-index based on a given list of words or phrases.

    I'm somewhat of a beginner to this text-indexing. I've been able to build and query a simple text-index and even implement my own list of stop-words. However, I'd like to be able to control the set of words that are indexed.
    For example, If I have a table that contains a CLOB field filled with text documents and I also have a list of 200 words:
    "TUBERCULOSIS"
    "DIABETES"
    "CHEMOTHERAPY"
    Can I generate an index that only indexes the words on that list and ignores all the other words? (the reverse of using a stop-list)
    Also, could it be done with a list of phrases instead of single words:
    "CARDIAC ABLATION"
    "ATRIOVENTRICULAR NODE"
    "PULMONARY ABSCESS"
    Thanks.

    Please see if you can use any of the pieces of the following example.
    SCOTT@orcl_11gR2> -- table containing list of phrases:
    SCOTT@orcl_11gR2> create table phrases
      2    (phrase        varchar2 (21))
      3  /
    Table created.
    SCOTT@orcl_11gR2> insert all
      2  into phrases values ('TUBERCULOSIS')
      3  into phrases values ('DIABETES')
      4  into phrases values ('CHEMOTHERAPY')
      5  into phrases values ('CARDIAC ABLATION')
      6  into phrases values ('ATRIOVENTRICULAR NODE')
      7  into phrases values ('PULMONARY ABSCESS')
      8  select * from dual
      9  /
    6 rows created.
    SCOTT@orcl_11gR2> -- ctxrule index on list of phrases:
    SCOTT@orcl_11gR2> create index phrases_idx on phrases (phrase)
      2  indextype is ctxsys.ctxrule
      3  /
    Index created.
    SCOTT@orcl_11gR2> -- table to hold combination of documents and matching phrases:
    SCOTT@orcl_11gR2> create table classifications
      2    (document  clob,
      3       phrase       varchar2 (60))
      4  /
    Table created.
    SCOTT@orcl_11gR2> -- context index on classifications table:
    SCOTT@orcl_11gR2> create index class_phrase_idx
      2  on classifications (phrase)
      3  indextype is ctxsys.context
      4  parameters ('sync (on commit)')
      5  /
    Index created.
    SCOTT@orcl_11gR2> -- regular index on classifications table:
    SCOTT@orcl_11gR2> create index class_phrase_idx2
      2  on classifications (phrase)
      3  /
    Index created.
    SCOTT@orcl_11gR2> -- table for documents:
    SCOTT@orcl_11gR2> create table documents
      2    (document     clob)
      3  /
    Table created.
    SCOTT@orcl_11gR2> -- trigger to populate classifications table from documents table:
    SCOTT@orcl_11gR2> create or replace trigger documents_bir
      2    before insert on documents
      3    for each row
      4  begin
      5    for r in
      6        (select phrase
      7         from      phrases
      8         where  matches (phrase, :new.document) > 0)
      9    loop
    10        insert into classifications (document, phrase) values
    11          (:new.document, r.phrase);
    12    end loop;
    13  end documents_bir;
    14  /
    Trigger created.
    SCOTT@orcl_11gR2> -- inserts into documents table:
    SCOTT@orcl_11gR2> insert all
      2  into documents values ('word1 tuberculosis word2')
      3  into documents values ('word3 diabetes word4')
      4  into documents values ('word5 chemotherapy word6')
      5  into documents values ('word7 cardiac ablation word8')
      6  into documents values ('word9 atrioventricular node word10')
      7  into documents values ('word11 pulmonary abscess word12')
      8  into documents values ('word13 word14 word15')
      9  select * from dual
    10  /
    7 rows created.
    SCOTT@orcl_11gR2> commit
      2  /
    Commit complete.
    SCOTT@orcl_11gR2> -- resulting population of classifications table:
    SCOTT@orcl_11gR2> column phrase   format a21
    SCOTT@orcl_11gR2> column document format a34
    SCOTT@orcl_11gR2> select phrase, document from classifications
      2  /
    PHRASE                DOCUMENT
    TUBERCULOSIS          word1 tuberculosis word2
    DIABETES              word3 diabetes word4
    CHEMOTHERAPY          word5 chemotherapy word6
    CARDIAC ABLATION      word7 cardiac ablation word8
    ATRIOVENTRICULAR NODE word9 atrioventricular node word10
    PULMONARY ABSCESS     word11 pulmonary abscess word12
    6 rows selected.
    SCOTT@orcl_11gR2> -- tokens that are indexed:
    SCOTT@orcl_11gR2> select token_text from dr$class_phrase_idx$i
      2  /
    TOKEN_TEXT
    ABLATION
    ABSCESS
    ATRIOVENTRICULAR
    CARDIAC
    CHEMOTHERAPY
    DIABETES
    NODE
    PULMONARY
    TUBERCULOSIS
    9 rows selected.
    SCOTT@orcl_11gR2> -- searches using text index:
    SCOTT@orcl_11gR2> set autotrace on explain
    SCOTT@orcl_11gR2> select phrase, document
      2  from   classifications
      3  where  contains (phrase, 'tuberculosis') > 0
      4  /
    PHRASE                DOCUMENT
    TUBERCULOSIS          word1 tuberculosis word2
    1 row selected.
    Execution Plan
    Plan hash value: 2513347404
    | Id  | Operation                   | Name             | Rows  | Bytes | Cost (%CPU)| Time     |
    |   0 | SELECT STATEMENT            |                  |     1 |  2046 |     4   (0)| 00:00:01 |
    |   1 |  TABLE ACCESS BY INDEX ROWID| CLASSIFICATIONS  |     1 |  2046 |     4   (0)| 00:00:01 |
    |*  2 |   DOMAIN INDEX              | CLASS_PHRASE_IDX |       |       |     4   (0)| 00:00:01 |
    Predicate Information (identified by operation id):
       2 - access("CTXSYS"."CONTAINS"("PHRASE",'tuberculosis')>0)
    Note
       - dynamic sampling used for this statement (level=2)
    SCOTT@orcl_11gR2> select phrase, document
      2  from   classifications
      3  where  contains (phrase, 'cardiac ablation') > 0
      4  /
    PHRASE                DOCUMENT
    CARDIAC ABLATION      word7 cardiac ablation word8
    1 row selected.
    Execution Plan
    Plan hash value: 2513347404
    | Id  | Operation                   | Name             | Rows  | Bytes | Cost (%CPU)| Time     |
    |   0 | SELECT STATEMENT            |                  |     1 |  2046 |     4   (0)| 00:00:01 |
    |   1 |  TABLE ACCESS BY INDEX ROWID| CLASSIFICATIONS  |     1 |  2046 |     4   (0)| 00:00:01 |
    |*  2 |   DOMAIN INDEX              | CLASS_PHRASE_IDX |       |       |     4   (0)| 00:00:01 |
    Predicate Information (identified by operation id):
       2 - access("CTXSYS"."CONTAINS"("PHRASE",'cardiac ablation')>0)
    Note
       - dynamic sampling used for this statement (level=2)
    SCOTT@orcl_11gR2> select phrase, document
      2  from   classifications
      3  where  contains (phrase, '%ab%') > 0
      4  /
    PHRASE                DOCUMENT
    DIABETES              word3 diabetes word4
    CARDIAC ABLATION      word7 cardiac ablation word8
    PULMONARY ABSCESS     word11 pulmonary abscess word12
    3 rows selected.
    Execution Plan
    Plan hash value: 2513347404
    | Id  | Operation                   | Name             | Rows  | Bytes | Cost (%CPU)| Time     |
    |   0 | SELECT STATEMENT            |                  |     1 |  2046 |     4   (0)| 00:00:01 |
    |   1 |  TABLE ACCESS BY INDEX ROWID| CLASSIFICATIONS  |     1 |  2046 |     4   (0)| 00:00:01 |
    |*  2 |   DOMAIN INDEX              | CLASS_PHRASE_IDX |       |       |     4   (0)| 00:00:01 |
    Predicate Information (identified by operation id):
       2 - access("CTXSYS"."CONTAINS"("PHRASE",'%ab%')>0)
    Note
       - dynamic sampling used for this statement (level=2)
    SCOTT@orcl_11gR2> -- searches using non-text index:
    SCOTT@orcl_11gR2> select phrase, document
      2  from   classifications
      3  where  phrase = 'PULMONARY ABSCESS'
      4  /
    PHRASE                DOCUMENT
    PULMONARY ABSCESS     word11 pulmonary abscess word12
    1 row selected.
    Execution Plan
    Plan hash value: 4202264836
    | Id  | Operation                   | Name              | Rows  | Bytes | Cost (%CPU)| Time     |
    |   0 | SELECT STATEMENT            |                   |     1 |  2034 |     1   (0)| 00:00:01 |
    |   1 |  TABLE ACCESS BY INDEX ROWID| CLASSIFICATIONS   |     1 |  2034 |     1   (0)| 00:00:01 |
    |*  2 |   INDEX RANGE SCAN          | CLASS_PHRASE_IDX2 |     1 |       |     1   (0)| 00:00:01 |
    Predicate Information (identified by operation id):
       2 - access("PHRASE"='PULMONARY ABSCESS')
    Note
       - dynamic sampling used for this statement (level=2)
    SCOTT@orcl_11gR2> select phrase, document
      2  from   classifications
      3  where  phrase = 'PULMONARY ABSCESS'
      4  /
    PHRASE                DOCUMENT
    PULMONARY ABSCESS     word11 pulmonary abscess word12
    1 row selected.
    Execution Plan
    Plan hash value: 4202264836
    | Id  | Operation                   | Name              | Rows  | Bytes | Cost (%CPU)| Time     |
    |   0 | SELECT STATEMENT            |                   |     1 |  2034 |     1   (0)| 00:00:01 |
    |   1 |  TABLE ACCESS BY INDEX ROWID| CLASSIFICATIONS   |     1 |  2034 |     1   (0)| 00:00:01 |
    |*  2 |   INDEX RANGE SCAN          | CLASS_PHRASE_IDX2 |     1 |       |     1   (0)| 00:00:01 |
    Predicate Information (identified by operation id):
       2 - access("PHRASE"='PULMONARY ABSCESS')
    Note
       - dynamic sampling used for this statement (level=2)
    SCOTT@orcl_11gR2> select phrase, document
      2  from   classifications
      3  where  phrase like '%AB%'
      4  /
    PHRASE                DOCUMENT
    CARDIAC ABLATION      word7 cardiac ablation word8
    DIABETES              word3 diabetes word4
    PULMONARY ABSCESS     word11 pulmonary abscess word12
    3 rows selected.
    Execution Plan
    Plan hash value: 723026238
    | Id  | Operation                   | Name              | Rows  | Bytes | Cost (%CPU)| Time     |
    |   0 | SELECT STATEMENT            |                   |     3 |  6102 |     0   (0)| 00:00:01 |
    |   1 |  TABLE ACCESS BY INDEX ROWID| CLASSIFICATIONS   |     3 |  6102 |     0   (0)| 00:00:01 |
    |*  2 |   INDEX FULL SCAN           | CLASS_PHRASE_IDX2 |     1 |       |     0   (0)| 00:00:01 |
    Predicate Information (identified by operation id):
       2 - filter("PHRASE" IS NOT NULL AND "PHRASE" LIKE '%AB%')
    Note
       - dynamic sampling used for this statement (level=2)
    SCOTT@orcl_11gR2>

  • Converting Year in YYYY format for return in select list

    Using Apex 4.1.1 on Linux (Apex Listener on glassfish)
    I have a table with week ending dates and use this table for as my LOV.
    The select list comes up like 12-SEP-12 when I check the value attribute in Firebug. Problem is that this comes up as year 0012 instead of 2012 when I try to use it in my PL SQL code to save it to a table.
    Is there a way I can get the return value for the year in YYYY format for return value in select list? Have tried to_date(dt, 'DD-MON-YYYY') with no luck.
    Cheers.

    All APEX session state values are held as VARCHAR2s. Explicit conversion to and from DATE values using specified formats is recommended. Convert to VARCHAR2 in the LOV query:
    select to_char(week_ending, 'DD-MON-YYYY') l, to_char(week_ending, 'YYYY-MM-DD') v from ...and to DATE in the PL/SQL process code:
    ...to_date(:p1_week_ending, 'YYYY-MM-DD')...I'm trying to standardise on using ISO 8601 representations for non-displayed date values. These are unambiguous, sort properly using character semantics, and are compatible with other systems and technologies.

  • Adobe Acrobat 8.....I can't get any of the text formatting items into my Toolbar....such as below.

    I can't get any of the above in my Toolbar.  I have everything else.   It was there earlier, then I somehow customized something and they are now gone.  Any way to restore those?  Thank you.

    Up until yesterday, my Word 2003 Toolbar(formatting text, font size, color, etc.) was part of my Adobe Acrobat 8 Toolbar.  I made a change...somewhere and it disappeared.  How can I get it back?  Thank you.  It is the Word Toolbar that is used in this Forum.

  • Can Labview output source code in text format?

    I am trying to file a patent that includes some Labview code. The patent office recommends attaching code (either source code or machine code) to show reduction to practice.
    However, it appears that the USPTO only accepts CD-Rs that have ASCII text on them. Is there a way to export Labview source code or machine code (from application builder?) to text?
    Does anyone have any advice for dealing with the PTO when Labview code is involved?
    Thanks,
    Casey

    > I am trying to file a patent that includes some Labview code. The
    > patent office recommends attaching code (either source code or machine
    > code) to show reduction to practice.
    >
    > However, it appears that the USPTO only accepts CD-Rs that have ASCII
    > text on them. Is there a way to export Labview source code or machine
    > code (from application builder?) to text?
    >
    > Does anyone have any advice for dealing with the PTO when Labview code
    > is involved?
    >
    I believe this has been done before. I did a quick search on
    www.uspto.gov, and found lots of them referencing LabVIEW -- meaning
    that LabVIEW was mentioned in the patent, and probably that LV code was
    the mentioned embodiment of the patent. I didn't browse all of them to
    see if or how they i
    ncluded source, but surely you can find a precedent
    for including a pdf or rtf with your diagrams.
    If you can't find anything else, print your VIs to RTF and see about
    submitting that.
    Greg McKaskle

  • Define Import format for location which is connected to database in FDMEE

    Hi,
    I have created new location in FDMEE and created BefImport script to load data from orcle to Open Interface table.
    Now, I need to import data from open interface table to FDMEE. Can any one let me know what would be the source system for it as it cannot be file and how to define mappings for the same (Are we going to define mappings the same way as we do for delimited file).
    Quick suggestions on this are highly appreciated...
    Thanks in advance

    You need to use the Open Interface Adpater to load data from the Open Interface table into FDMEE where it can be mapped as appropriate. Check out Appendix E in the FDMEE Admin guide for details on how to do this
    https://docs.oracle.com/cd/E40248_01/epm.1112/erpi_admin_11123520.pdf

Maybe you are looking for