Can Pages create a large banner?

I'm trying to create a large banner (2 or 2.5 ft. x 5 or 6 ft) by "tiling" multiple pages together to create one large image of text. Can Pages do this, and if so how?

Can Pages do this, and if so how?
Pages > File > Page Setup
Settings > Page Attributes
Format for > Any printer
Page Size > Custom
You are able to define a media geometry that is independent of the media geometry in your presently registered printer.
If you define a media geometry that is larger than the media geometry in your presently registered printer, the system lets you scale down the media geometry.
The media geometry scales as a whole - you can specify the scaling manually or you can let the system compute the scaling (fit once, fit twice - called two up, fit four times - called four up, etc.).
You cannot set multiple origins within the media geometry and manually tile the larger media geometry onto the smaller media geometry supported in your presently registered printer.
This is a limitation of Apple's implementation and not of the underlying printing model.
This is before breakfast coffee, hope my random access memory is working.
/hh

Similar Messages

  • How can I create projects larger than 7GB?

    I want to creat a project and it will be very large... over 10GB. I know that because I finnished only two thirds of it and it already 7GB size (I get the warnning message all the time)
    Is there any way to create a larger projects? I dont want to burn it on a disc... I just want to save it as an image file, and play it from there...
    If there's a way to make my project smaller so it can fit a Dual-Layer disc will also be a bless...
    Thank you all!!
    Naor

    Yes. It is not the size in GB of your project. I have had many projects that were between 60 and 100 GB, but under the time lime.
    It is theTIME limitation that iDVD is complaining about to you. A single-layer DVD can hold 120 minutes of content, including menus and submenus. A double-layer DVD can hold twice that much, 240 minutes total. Your project exceeds the capacity of even a double-layer DVD because it is too long to burn on one DVD.
    To burn DVDs with that many minutes, you will need to split your project and burn it to two DVDs, so that each part is not longer than 240 minutes total time. This is the same for creating disk image files. They cannot exceed the total time limits.
    I have seen reports of supercompressing data using Toast, so that you can fit more content onto a disk, but I have not used it this way, and I think you are probably trying to put too much onto one disk even for Toast. Maybe others have done this and can give your their experiences with Toast's limitations.

  • Can't create Ramdisk larger tham 16M

    Hi Archers,
    I am trying to create a ramdisk but can't create ramdisk higher than 16MB. If I create a ramdisk smaller tham 16MB, everything is ok, but if I create higher, I got the following error:
    mkfs -t ext4 /dev/ramcache 102400
    mke2fs 1.41.14 (22-Dec-2010)
    mkfs.ext4: Filesystem larger than apparent device size.
    Proceed anyway? (y,n) y
    Filesystem label=
    OS type: Linux
    Block size=1024 (log=0)
    Fragment size=1024 (log=0)
    Stride=0 blocks, Stripe width=0 blocks
    25688 inodes, 102400 blocks
    5120 blocks (5.00%) reserved for the super user
    First data block=1
    Maximum filesystem blocks=67371008
    13 block groups
    8192 blocks per group, 8192 fragments per group
    1976 inodes per group
    Superblock backups stored on blocks:
        8193, 24577, 40961, 57345, 73729
    mkfs.ext4: Invalid argument while zeroing block 102336 at end of filesystem
    Writing inode tables: done                           
    Creating journal (4096 blocks): mkfs.ext4: Invalid argument
        while trying to create journal
    I have even re-compiled the kernel with followings but get the same problem
    CONFIG_BLK_DEV_RAM=m
    CONFIG_BLK_DEV_RAM_COUNT=16
    CONFIG_BLK_DEV_RAM_SIZE=524288
    Any Solution for this?
    Cheers

    fukawi2 wrote:
    I've never made a ramdisk that way, I always make an entry in fstab with the size:
    tmpfs /tmp tmpfs noatime,nodev,size=1g,mode=1777 0 0
    Note the size=1g option
    I would like to create a Ramdis such as /dev/ram0 so that I can mount and unmount it without losing my data. with tmpfs, after unmount, all my data will be erased.
    Cheers

  • Can Pages Create Forms?

    In other word processors (Open Office 2.2, to be precise - and probably word, but I don't use it so I don't know) you can create a form that can be edited by whoever reads your document - ie, you can create something like:
    First Name:
    Last Name:
    Occupation:
    Shoe Size:
    With a text box next to each item that is left blank but later filled in by whoever fills in your form. This was especially useful when exporting to PDF, as the forms would remain editable in Preview and Adobe Reader, but the rest of your document is read-only.
    I don't see any obvious way to do the same sort of thing in Pages. Did I miss something, or are forms completely absent from the feature set of Pages?
    (I need to write up some contracts, and want to leave some blanks to fill in for the particulars of the parties involved, but make the text non-editable.)
    Thanks!
    -- Kimball

    It cannot.

  • Can I create a large slideshow in Aperture?

    I have about 800 photos I want to make a slideshow in Aperture3.3, add audio, theme. Can this be done, or should I split it up? In the past in iPhoto, iDVD, I have had problems getting large projects to process, they seem to stall. I just recently purchased Aperture, this is my first project. I have USB thumb drive 8GB to transfer the Slideshow to, will this be a problem? I was told I could drag and drop the slideshow to the thumbdrive. We were on a long trip with friends and I want to give this to them as a gift. Thank you for your answer.

    Can I suggest that if you're making a large slideshow then you might be best working in iMovie or a dedicated Slideshow app. You'll have much more fine control over what happens - especially with the sound track and the timings.
    Alternatives to Aperture's slideshow include:
    iMovie, on every Mac sold.
    Others, in order of price: PhotoPresenter  $29
    PhotoToMovie  $49.95
    PulpMotion  $129
    FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
    Final Cut Pro X $299
    It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs. However, there is no doubt that Final Cut Pro X is the most capable app of them all. You get what you pay for.

  • Can i create a large number of identical tabs?

    I have searched around and found nothing on the topic.. what i am looking at here is this.
    I have currently set up two tabs that are identical, each representing a component on a device and the component is selected when the user clicks on the tab.
    For example, if i switch to tab two, i select component two.
    Now these tabs are identical, same controls same indicators and so on.. what i want to know is if it is possible to make it so that say.. if i tell it i have 5 components, it would show 5 identical tabs. if i told it it had 20 components it would bring up 20 and so on. At the moment i am looking at having to create each tab one by one and then hiding them..
    Thanks for your time and any help at all is greatly appreciated

    bracker wrote:
    altenbach--this problem could be phrased a little more generally though:  some, but not all types of controls could appear on each tab, while other controls are unique to particular tabs.  I've encountered exactly this situation, and I don't have a good way to duplicate the exact location of the common controls on each tab.  Can "copy and paste" be done "in place" somehow?
    Using altenbach's approach would be best. If you have a handful of specific controls but most are common you can control this by showing/hiding control. When the user selects the type of device you could show/hide the controls which are not common to all. Using this approach you could place controls on top of each other as long as only one would be visible at a time. This saves on diagram space and gives you a clean interface. Internally you use an array of clusters. If you may have different clusters you can decide if the differences are significant enough to warrant using different cluster definitions or simply having a few parameters that do not apply to all devices included in a single cluster definition. The controls on the front panel itself do not need to be in a cluster since they are only there for the UI. This gives you a bit more freedom in laying out the front panel. Anything that uses typedefs (ENUMs for example) should share the same typedef though.
    If you feel very ambitious and think you may reuse this control in several applications you could implement this as an X-Control.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

  • Can I create a large network with 2 WRT900N routers & 2 live ethernet ports 80 ft apart.

    I have a main cable modem in the cellar and from there it splits with one LAN line going to one end of the house and the other LAN going to the other. I have two wireless routers (WRT900N). Yes, I know I can connect one WRT900N to another WRT900N through their LAN ports. That being said, can't I do this some other way? It would make sense that with two live LAN CAT-5 plug-ins, two top end routers, that I should be able to do it. That being said, the only feedback I am getting is to go and return one of the routers and buy a couple of access points (although the reviews on the WRT900N repeaters are not so flattering) but this does not make any sense to me. thanks for anyone's help!

    Are you sure that it is WRT900N ??
    I think it is WRT600N !!

  • How can I create only thumbnails photo page without larger photo

    Is there a way to create photo page without the larger photo?

    I wonder if you can use a photo template page to drop your photos into and then just leave off the slideshow button. I wonder if that will disable the click to enlarge photo function or if it just affects the slideshow stuff.
    Otherwise, you could manually make your thumbnails page...like a contact sheet.
    1. Use something like iPhoto to export photos scaled down to thumbnail size, like 100x133, into a folder on the desktop
    2. Drag and drop thumbnails from this folder into iWeb using blank template page.
    3. select all the thumbnails, open up the Inspector ruler tab, click on "Use orignal size".
    4. Arrange thumbnails in desired order and position on page.
    This is a complete manual job. I don't know if there is any other way besides disabling the slideshow function. I would probably live with the "click to enlarge" function over making a contact sheet by hand.

  • How can you create a customized page to change user password?

    Hello to all,
    I would like to create a customized page for a user to change their password. We are using Portal version 3.0.9 on Windows NT/2000. Currently there is a page in portal where a user can change their password.
    I tried linking to that page by copying the shortcut url and adding it as an html portlet. The problem is that we want to direct the users to a
    page of our choosing when they click on the "cancel" and "ok" buttons. I read in the forums that there is a selfreg.cmd script.
    I also read that there is some code that has been available.
    Has anyone implemented a customized user password change page? Do you know of any links that might have steps to follow or
    more informatioin?
    Thanks in advance,
    Lindsay

    Hi,
    I was able to customize the change password screen through a procedure. This is what I did:
    * Created a procedure under the Portal30_sso schema:
    CREATE OR REPLACE procedure reports_chage_password
    site2pstoretoken in varchar2 default null
    ,p_username in varchar2 default null
    ,p_error_code in varchar2 default null
    ,p_submit_url in varchar2 default null
    ,p_done_url in varchar2 default null
    ,p_pwd_is_exp in varchar2 default null
    ,p_password in varchar2 default null
    is
    begin
    htp.htmlopen;
    htp.headopen;
    htp.title ('<TITLE of Page>');
    htp.headclose;
    htp.bodyopen;
    htp.p('<table width="100%"><tr><td colspan=2 align=center><IMG SRC=<directory of image if you want>"><br><hr><br></td></tr>');
    htp.p('<tr><td colspan=2 align=center>');
    htp.p('<font COLOR="#000080" face="Times New Roman" size=+2><b>');
    htp.header(nsize => 1 ,cheader => 'Change Password');
    htp.p('</b></font>');
    htp.p('</td></tr><tr><td align=right>');
    htp.formopen(curl => p_submit_url );
    htp.p('<font color="#000080" face="Times New Roman" size=+1>');
    htp.p ('Username:');
    htp.p('</td><td alight=left><font color="#000080" face="Times New Roman" size=+1>');
    htp.p(p_username);
    htp.p('</font>');
    htp.p('</td></tr>');
    htp.formHidden(cname => 'p_username',cvalue => p_username);
    htp.br;
    htp.p('<tr><td align=right>');
    htp.p('<font color="#000080" face="Times New Roman" size=+1>');
    htp.p ('Old Password: ');
    htp.p('</font>');
    htp.p('</td><td align=left>');
    htp.p ( htf.formPassword(cname => 'p_old_password',csize => 30,cmaxlength => 30) );
    htp.p('</td></tr>');
    htp.br;
    htp.p('<tr><td align=right>');
    htp.p('<font color="#000080" face="Times New Roman" size=+1>');
    htp.p ('New Password: ');
    htp.p('</font>');
    htp.p('</td><td align=left>');
    htp.p ( htf.formPassword(cname => 'p_new_password',csize => 30,cmaxlength => 30) );
    htp.p('</td></tr>');
    htp.br;
    htp.p('<tr><td align=right>');
    htp.p('<font color="#000080" face="Times New Roman" size=+1>');
    htp.p ('Confirm New Password: ');
    htp.p('</font>');
    htp.p('</td><td align=left>');
    htp.p ( htf.formPassword(cname => 'p_new_password_confirm',csize => 30,cmaxlength => 30) );
    htp.p('</td></tr>');
    htp.p('<tr><td rowsapn=2>');
    htp.formHidden(cname => 'p_done_url',cvalue => '<the url that you want users to go to when they are done>');
    htp.formHidden(cname => 'p_pwd_is_exp',cvalue => p_pwd_is_exp);
    htp.formHidden(cname => 'p_password',cvalue => p_password);
    htp.formHidden(cname => 'site2pstoretoken',cvalue => site2pstoretoken);
    htp.p('</td></tr>');
    htp.p('<tr><td align=right>');
    htp.formSubmit(cname => 'p_action',cvalue => 'OK');
    htp.p('</td><td align=left>');
    htp.formSubmit(cname => 'p_action',cvalue => 'CANCEL');
    htp.p('</td></tr></table>');
    if p_error_code is not null then
    htp.br;
    htp.fontOpen(ccolor=> 'red', csize=> 4);
    if p_error_code = 'auth_fail_err' then
    htp.p('Old password is incorrect');
    elsif p_error_code = 'pwd_rule_err' then
    htp.p('The new password does not follow '||
    'the password policies.');
    htp.br;
    htp.p('Verify with your System Administrator '||
    'about the Password Policies');
    elsif p_error_code = 'confirm_pwd_fail_txt' then
    htp.p('Confirmation for new passord is not '||
    'the same as the New Passowrd');
    elsif p_error_code = 'null_new_pwd_err' then
    htp.p('New password cannot be null');
    elsif p_error_code = 'null_old_pwd_err' then
    htp.p('Old password cannot be null');
    else
    htp.p ('Error: ' || p_error_code );
    end if;
    htp.fontClose;
    end if;
    end;
    * Grant this procedure to PUBLIC
    * Update the portal30_sso.wwsso_ls_configuration_info_$:
    UPDATE portal30_sso.wwsso_ls_configuration_info_$
    SET LOGIN URL = '<YOUR CUSTOM LOGIN URL OR THE WORD UNUSED IF YOU DON'T HAVE ONE> http://<MACHINE_NAME>.<DOMAIN>/pls/portal30_sso/portal30_sso.<NAME OF PROCEDURE>';
    * After you update the table, go to your account information link, and click on the change password link.
    * Then copy the url that you see in your address line
    * And if you want a change password link at the top of your portal page, just go to EDIT on your page, then edit the banner defaults. Then in the links add the Lable and the URL. The URL would be the URL you copied from the previous step.
    Hope this helps.
    I've customized the login page too if you would like some sample code for that. Let me know.
    Martin

  • In Pages (5.5.1) can I create multiple Paragraph Styles within one paragraph?

    In Pages (5.5.1) can I create multiple Paragraph Styles within one paragraph. 
    I need to make a table of contents for my Mater's Thesis and want to use the automatic table of contents feature.  I want the first sentence of a paragraph to have a different paragraph setting than the rest of the paragraph.  Is this possible?
    Thanks!

    Nice of you to be doing this for your Mother's Thesis.
    There are several issues here:
    1. A Paragraph Style is what it says, the style for the paragraph
    2. You can format text within a paragraph by applying a Character Style
    3. Pages 5.5.1 lets you apply formatting to overall text for the T.O.C. but not parts of it and you can not retain that formatting as a Paragraph style
    So in answer to your question, no.
    You will need to create the T.O.C. manually and unfortunately as Pages 5.5.1 can't create bookmarks (just one of over 100 missing features) you will be unable to link the T.O.C. to the referred pages in the list.
    Peter
    Apple's marketing slogan:
    Pages 5.5.1 - Can't Do That!

  • How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word.

    How can I create a text pop up window in my Pages document? I want text to pop up when the reader hovers his/her cursor over a certain word in the document. I am teacher. So for example when a student came to word he/she did not know, if he/she hovered the cursor over the word, a defintion or other information would appear.  You can do this in Word using bookmarks/hyperlinks but I can't figure this out in Pages. I can link it to another point in my Pages document but I just need the text to pop up - not take the reader to another location.  THANK YOU!!!!!!

    Have you tried Word for Mac?
    You will need to test if links survive export or printing to .pdf
    Peter

  • How can I create more than one main window in a page of SAP SCRIPT?

    How can I create more than one main window in a page of SAP SCRIPT? If anybody helps me I will be obliged.
    Regards,
    Subhasish

    Hi Ganguly,
    It is possible to have more than one main window in a same page.
    You create a main window and simply you copy and past it in the same page.. it will create first main window name as MAIN and other main windows as MAIN01,MAIN02.... up to MAIN99.
    Contets flow from MAIN , MAIN01, MAIN02.......................MAIN99. contents after filling the current window it flows to next window(by default, you skip as well with some keyword not sure could be NEW-WINDOW)
    you want print the main window data twice? or you want to create two main window in the same page ?
    1. give two copies in the no of copies in the output type screen ( Which pop up is coming after excute the program ).
    2. create two page with the same script form.
    3. you can write the coding inside the program to print twice the same page.
    Hope this information use full to you..

  • Can I create multiple instances of  realplayer plug-in in one jsp page?

    I want to play meny video files in one jsp web page, these video files are to be played with the embeded plug-in of realplayer, each plug-in was linked(use its SRC property) a different video file. But, to my surprise, when I press the play button, every player played the same video file,not its specified file.
    I have no idea why it did so and what can I do?
    Whether can I create multiple instances of realplayer plug-in in one jsp page, that is to say, each instance is independent of others?
    thanks in advance!

    Generally speaking, Internet Explorer tries not to launch multiple versions of a plug-in. So what's happening is that you load the first video clip, and then before it has a chance to play, you load the second video clip into the same window. (It's like changing songs in WMA.)
    In some cases - this may not work for Real Player, but it's worth trying - if you spawn a new window through a hypertext link and then launch the plug-in in that window, IE will treat it separately. Otherwise, you could not, for example, run two Macromedia Flash applications from different web sites at the same time.
    Keep in mind that only one program can access the soundcard at a time, so Real Player may purposely "pause" or "cancel" other video streams until the active one finishes. If you were using the desktop version, selecting another video by any means aborts the currently running video (i.e., RP won't let you create a separate instance of it).
    The easiest solution is to create a wrapper JSP file that takes the name of the video clip, and plays it. Call that JSP and specify that it should be opened in a new window via the TARGET keyword in the anchor tag. Then hopefully RP itself won't block a second window from running.

  • How can I create an internal hyperlink in iWeb? Would like to put an interactive menu at the top of a page.

    How can I create an internal hyperlink in iWeb? Would like to put an interactive menu at the top of a page.

    Do you meant a link to one of your other pages or to a location on one of your pages?  If it's the latter those are called anchors and iWeb does not support them.  However, there are workarounds for that.  See this blog: How to use anchors in iWeb.  If you don't have a lot of widgets on the page it can work fairly well.
    OT

  • How can I create a new label using Pages and Avery Labels products?

    How can I create a new label using Avery LAbels and PAges on an imac?

    Contacts prints to Avery labels.
    Otherwise just open the appropriate Word template from Avery's website, in Pages.
    Peter

Maybe you are looking for