Can Pages do this: hotlinks within pages for outlining

Hello,
I'm looking for a program that will help with outlining multiple projects I have going on. Ideal working method would be staring from a macro (brainstorming what each project will be), and build into a micro (specific thing that need to get done), and finally into a "to-do" list.
So far I've been using dreamweaver for this application, as I can easily link multiple pages together. however, I'm getting sick of how it handles text, and am hoping a word processor like pages might be the answer. Can you create "hot links" ala a website, that instantly jump you to different pages? Do these pages have to be in a single document, or can the be in multiple documents.
Thanks in advance for your reply.

Pages does internal links within the same document but not links to other documents on the harddisk.
If you are good at setting things up, I would recommend that you install MediaWiki locally for that kind of job. It is the software of Wikipedia, and it seems to handle all you need to do, and much more.
However, I have never installed it on a Mac, and it usually takes a few hours to get right on Windows. Take a big breath before you start.

Similar Messages

When I try to save a document a message comes up saying "Couldn't auto-save document." How can I fix this? Thank you for your help!

When I try to save a document a message comes up saying "Couldn't auto-save document." How can I fix this? Thank you for your help! - Chip

This is a mean one. I don't have time to try and find the cause, but at least some answers to your questions, to hopefully shed some more light on this.
Where was the original destination? iCloud folder.
On another drive? Tried to Save as... to Hard Drive (also changing name of file), always get the same non-descript short Error "Couldn't auto-save document." (slides down from top with a yellow warning triangle). Status to the right of document name is "Not Saved".
Another Server? No access at this time.
I also tried File, Revert to, Browse all versions, to check what I'd be losing. Saw I wasn't losing much and selected the last version and pressed Restore - same error. In the end I just quit Pages and re-opened. The document opened with the last few edits missing (but with the status "Edited" next to the name). I re-edited and could save. Good old habit of saving often.

I formated my i phone 3 g and when it loaded back up and asked me to choose language local and wi fi connection everything went fine but when i hit next it said my i pod can not be activated why and how can i fix this i bought it for my daughter for x m

i formated my i phone 3 g and when it loaded back up and asked me to choose language local and wi fi connection everything went fine but when i hit next it said my i pod can not be activated why and how can i fix this i bought it for my daughter for x mas and that is tomorrow

AdaS_VZW,
I'm not sure if the area has been surveyed; it's a large group of apartment buildings about a within a couple miles of Dulles International Airport in Northern Virginia, so I would imagine that it probably has, but I'm not sure. How would I find out?
I understand that the Network Extender does not support LTE connections (I know there are two models, the 1x-only and 3g, both made by Samsung - I have the 3g model, SCS-2U01). I know that it can support a 3G data connection, but that should be irrelevant - I'm always connected to my wifi network in my apartment.
What's particularly vexing, however, is that both a Galaxy S4 and Galaxy Nexus in my apartment (the other lines on my account) do not seem to have this issue. While I haven't done so with the S4, the Nexus exhibits this problem when my SIM is in it - and again, this is a fresh SIM from just a few weeks ago.
I'm currently trying to disable Mobile Data when in the apartment to see if that will make it more stable. I'll post in a day or two with results from that.
Shawn

I have a dollar amount balance on my itunes account... can i use this to purchase apps for my MacBook Pro?

I have a dollar amount balance on my itunes account... can i use this to purchase apps for my MacBook Pro?

You should be able to. As long as you are signed in to the same AppleID that has an available balance. The services are linked.

How can I remove this extra authorization check for dynamic parameters

Hello expert,
I created a new dynamic hirarchical parameters as " client-->policy" in crystal report. these parameter value are coming from a physical table. the other part of report extract data by a oracle procedure. when I ran this report in client, it is ok for everything. but when I schedule it or run it in infoview, I need extra authorization for access these dynamic parameter, eventhough this is not for accessing other parameters. How can I remove this extra authorization check for dynamic parameters?

Hi
Open the crystal designer  Edit the parameter In the prompt window at the existing option you can find the LOV name.
Open the Business view manager and find that prompt name in u201CRepository Exploreru201D window and select that parameter  right click that parameter  Select edit rights  provide rights for your user name in that window.
--Naga

Can Pages for iOS do Outline Documents?

To all the folks with an iPad and Pages: does the iPad version:
- support editing outline documents?
- have ability to create new outline documents?
I do all my idea management in outlines, and really hope it's there.

It can. I too use outlining extensively for my work. I got my iPad today, and immediately downloaded iWork Pages to import and edit a MS Word file in outline form. It worked great, and conformed to the existing outline formatting. To create a new document, there are minimal but adequate options for outlining. You can create lists that are numbered or lettered, and the outlining will function automatically. You can either use a menu-based tabbing feature to adjust outline levels, or you can actually grab a line of text and drag it horizontally, and Pages will automatically adjust its outline level accordingly. Not as robust as Word, but it does work well!

Can I do this with a plugin for Reader?

Hello, I'm totally new to Adobe Reader development and I'm in the need to develop a plugin for Reader that must implement certain functionality. Before starting, I think it's better to ask to the experts if what I want to do is possible or if what I need goes beyond what the Adobe API provides. So, if you're so kind, I'd like you to check the list of needed features and please tell me if they can be fulfilled with a Reader Plugin.
The plugin must work for Adobe Reader 7,8,9 and 10. It's not a problem if I need to develop a plugin for each version.
When the user tries to print a document, I will block/cancel the printing process depending on which document is tried to be printed (the full path to the document will be needed).
I need traceability in "Save as" and "Save as text" features, if the user saves a copy of "c:\file.pdf" into "c:\file - copy.pdf" I need to know both the source and the destiny of the save as operation. Same for any kind of "export to format x" operations if possible.
I need to be able to communicate with another module via named pipe to periodically send information. This might require dinamically loading a DLL and calling its methods.
[Optional] I need to restrict the use of the clipboard depending on the documents opened in Reader, i.e. don't allow to copy if a certain document is opened.
[Optional] If a document is exported via file printer (like Microsoft xps printer), I need traceability on this operation. I'm really pesimistic about this one.
Also, I'm assuming that retrieving the list of opened documents, or the "active" document will be possible at any time. Please, correct me if wrong.
Thank you very much for your time, for reading and helping. Im' not asking you to tell me how to implement every single feature, I just need to know if I will be able to implement them when I get some knowledge.
Have a great day. Greets.
Message was edited by: fernandoarrabal reason: bad phrasing

Two things.
First – Adobe no longer supports Reader 7 or 8, so you would be on your own for those.
Second, in order to develop a plugin for Reader you need to obtain a license from Adobe. Details and forms are in the Acrobat SDK. Start this process ASAP as that will tell you whether you will be able to do your plugin or not.

Old computer died, need to get my music from my ipod touch to my pc, how can I do this without losing music for free!?

I have an Ipod touch with about 900 songs on it, i used to connect with my old pc until it recently broke. i have just bought a new pc and was wondering how i could get my music from my ipod to my new computer! the only thing i need is music , no videos or anything. does anyone know how i can do this for free? not very good with computers by the way!

- Transfer iTunes purchases by:
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- Transfer other music by using a third-party program like one of those discussed here:
Copy music
- If you have synced photos and some other items you will need a paid program like TouchCopy or PhoneView. They also do music.
- Connect the iPod to the computer and make a backyp by right clicking on the iPod uder Devices in iTunes and select Backup
- Then restore the iPod from that backup.

Testpoint 6052E synch; can I do this via a DLL for this board?

I am new to NI boards. I have to use Testpoint for a workstation.
I have to sync up the output of the card to the input channel.
I have a PCI 6052E board and an SBC terminal block. In this box
I have Two OUTPUT channels and one channel coming back in.
I've been told that using Testpoint alone does not do the trick.
Can I use a dll file to send the right set of instructions? I found this on the web:
Can I synchronize a one-channel analog input data acquisition with
a one-channel analog output waveform generation on my PCI-MIO E Series
board?
Yes. One way to accomplish this is to use the waveform generation timing
pulses to control the analog input data acquisition. To do this, follow
steps 1 through 4 below, in addition to the usual steps for data
acquisition
and waveform generation configuration.
1. Enable the PFI5 line for output, as follows:
* If you are using NI-DAQ, call Select_Signal(deviceNumber,
ND_PFI_5, ND_OUT_UPDATE, ND_HIGH_TO_LOW).
* If you are using LabVIEW, invoke Route Signal VI with signal
name set to PFI5 and signal source set to AO Update.
2. Set up data acquisition timing so that the timing signal for A/D
conversion comes from PFI5, as follows:
* If you are using NI-DAQ, call Select_Signal(deviceNumber,
ND_IN_CONVERT, ND_PFI_5, ND_HIGH_TO_LOW).
* If you are using LabVIEW, invoke AI Clock Config VI with
clock source code set to PFI pin, high to low, and clock
source string set to 5.
3. Initiate analog input data acquisition, which will start only when
the analog output waveform generation starts.
4. Initiate analog output waveform generation.

I used the nidaq32.dll and made the calls as listed on my first email.
These worked fine. I reviewed my synchroniztion (looping out==>input via a
coax cable). But we noticed that there is a one to 2 sample jitter.
Is there something I can do to prvent this?
Below is my Testpoint Code:
Action list for Pushbutton object "Pushbutton1":
1) Clear graph Graph1
2) Calculate Math3
3) Draw graph Graph2 with Math3
4) Calculate Length with Outx=Math3
5) Linear series Loop1 from 1 to 50, step by 1
6) Set Display1 to Loop1
7) Call SyncBoard with 0,"ND_PFI_5","ND_OUT_UPDATE","ND_HIGH_TO_LOW"
8) Call SyncBoard with 0,"ND_IN_CONVERT","ND_PFI_5","ND_HIGH_TO_LOW"
9) Start A/D A/D1 #samples=Length, rate=10000 Hz, channel(s)=0, event after "all"
sample(s)
10) Start D/A D/A1 rate=10000 Hz, channel(s)=0, values=Math3, mode="once"
11) Delay Time1 for 0.2 seconds
12) Stop D/A D/A1
13) Stop A/D A/D1
14) Draw graph Graph1 with A/D1
-- Sal.vador
-- Northwestern University

HT4571 can i pay this fee one time for one month with no contract or further charges

if I activate my ipad with internet service by using this method... is it a one time charge, 30 day charge?
no contract? I would like to do this on occasion but not on a month to month basis with auto charges...
help?

It depends on your carrier; you'll have to ask them. But in the US, it's month-to-month for all three supported carriers, to the best of my knowledge, with automatic renewal; you have to cancel or you get billed automatically the next month.
Regards.

Can i make this return a value for papers

class Consumers {
private String firstname;
String Area(){
String Area = "";
if(Area.equalsIgnoreCase("y")) Area = "Urban";
else Area = "Suburban";
return Area;
private String gender;
private static int age;
private String Paper;
private static boolean fashion = false, sports = false,
entertainment = false, healthcare = false;
private static final String Area = "";
/* declare a constructor to initialise */
/* new instances of class Consumers */
public Consumers(String f, String A, String g,
int a, String P) {
firstname = f;
String Area = A;
gender = g;
age = a;
Paper = P;
/* methods to retrieve values of instance variables */
public String getFirstname() {
return firstname;
public String getArea(){
return Area;
public String getGender() {
return gender;
public int getAge() {
return age;
public String getPaper() {
return Paper;
//method to see if paper and consumer are suitable
public boolean isCompatibleTo(String paper2) {
return false;
private static void NewsPaperSupplements() {
// if rules
if(age < 25) {
fashion = true;
if(age < 35){
fashion = true;
sports = true;
if(age < 40){
fashion = true;
if(age < 60){
healthcare = true;
class SundayPapersApplication {
public static void main (String args[]) {
String firstname;
String Area;
Consumers person1;
Consumers person2;
String district;
String gender;
int age;
String Paper = "";
String answer;
// Create a final int variable of 5 customers.
final int numberOfConsumers = 5;
// Stores customers.
Consumers[] allConsumers = new Consumers[numberOfConsumers];
Terminal terminal = new Terminal("");
// Loops and fills with customers.
for(int i = 0; i < numberOfConsumers; i++) {
/* ask user for information about 1st client */
terminal.println("Enter data for 1st person");
firstname = terminal.readString("Firstname: ");
Area = terminal.readString("Area: ");
gender = terminal.readString("Gender (male/female): ");
age = terminal.readInt("Age: ");
/* create a new Client instance with given information */
person1 = new Consumers(firstname, Area,
gender, age, Paper);
/* determine if the given clients are compatible */
terminal.print(person1.getAge() + " " + person1.getArea() + "");
if (person1.isCompatibleTo(Paper))
terminal.println("suitable.");
else
terminal.println("not suitable.");
// Create a new Customer object and store it on the i-th
// place in your array.
allConsumers = new Consumers (firstname, Area,
gender, age, Paper);
for(int i = 5; i < numberOfConsumers; i++) {
// Print customers to the 'terminal'.
out of curosity, now i want to know why it keeps returning void for papers.?
can anyone help again.

it prints out a terminal, which asks the user for the information.
what i was asked to do was return a paper...i.e. fashion / healthcare and entertainment to people under 25 and from an urban area.
the only thing my program does is take the values from the customer and store them to the screen.
i know it's intially set to null....so how do i get the papers applicable to the above age group to print to screen and say whether it is suitable for them. i've tried an IF/Else statement but it doesn't work and im getting even more confused.

How do I get the acrobat toolbar on internet exploer 11 with acrobat 9 ? System says its enabled but its not there.. I need to covert webpages to PDF and can't do this since I upgraded for IE 9 to 11. Thanks

as per the above title

Hi,
This could be due to compatibility issues with Acrobat 9 and IE 11.
Please go through below link for more information.
http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html
Regards,
Anand

When downloading Creative Cloud, it stalls for long time and never completes the download. How can I resolve this issue?

When downloading Creative Cloud, it stalls for a long time and never completely download. How can I resolve this issue?

CueTheArts for information on how to resolve download errors please see Error downloading and installing Creative Cloud application. You are welcome to update this discussion if you have any questions regarding the steps listed within the document.

Preview icon for music / video - can I change this?

Annoying change in the "preview":
When viewing in "columns" and I want to preview audio or video, a little annoying icon with two 8th-notes now appears (for audio). Previously there was a simple timeline 'bar' that I could grab and easily scroll forward to search for specific things in the audio clip. Now with the new cute icon, I can't do this. Same goes for video - can't scroll.
And when you need to scroll through 100 of these a day, it is really annoying to not have the timeline.
Can I change back to the old way? I.e., I need the timeline bar. I can't find this in "view options".

Does anyone know why this is not a preference?
It used to be soo cool to skip through my movies and songs but now it doesn't work
It is very annoying to lose useful features. Please advise if you know how to get the scroller/scrubber back.
Thanks.

I have messages in mail that are color-coded as if by a rule, but I have no rules set. How can I correct this?

The only rule that I ever had in Mail was the default one that color coded messages from Apple blue. I notice that some messages are color-coded brown and I have no rules set at al (hence no rule to turn off.) Some of the messages are related to viewing online magazine, but not all. How can I stop this?

Hi. Thanks for your message.
Well, I understand what you are trying to say but I thought it was easier to categorize in Apple Mail.
On Entourage I just click twice on a sender address, record it on Address book and give it a colour that I previously defined as "Work", "Personal", "Customers", "Suppliers", "Friends" or whatever.
As Apple Mail don't have Address Book as part of it but an outside feature it's very annoying. Of course I am used to use a software and I don't expect now Apple Mail do everything as Entourage but... as someone said it seems Apple Mail stopped in time. The recent version seems the first one ever issued. I hate the way Mail.app handles attachments by placing big chunky previews right in my email. I prefer them to be named attachments listed somewhere else, out of the content of my email. I don't if I can change this via terminal commands? Can you tell me if that is possible?
I don't understand why Apple Mail have lots of plugins instead of a great improvment from the backstage.
I use Apple computers since ever and I love this machines but sometimes I don't understand this lake of improvments.
Take a look at this link:
http://scottworldblog.wordpress.com/2009/10/12/microsoft-entourage-vs-apple-mail /
Of course I don't agree 100% with him but some things are true...

Can Pages do this: hotlinks within pages for outlining

Similar Messages

Maybe you are looking for