Can Palemoon and Firefox co-exist ??

My friend uses Palemoon and I want him to switch to Firefox. Can he use them both on the same computer to see which one he prefers ??

They can coexist, but should both use their own profile. You can force this with the -p startup parameter (you can edit the shortcut to the program to include this parameter).
It may work to use the same profile, but in case it becomes corrupted, you know how it might have happened :)

Similar Messages

Can Actuate and BIP co-exist in a Siebel environment?

Just need to check how we can have both BI Publisher and Actuate co exist in our Siebel environment
thanks.

I doubt that both can co-exists as we have asked Oracle support about this before.
Thank you

Can Robohelp6 and Robohelp7 co-exist on a machine?

I write for a few different groups, some with Robohelp 6 and
some with 7.
For life to be good, I really need to have versions 6 and 7
installed on my machine. I have a license for each - my department
bought version 6, and another department bought me a copy of
version 7. But - when I installed 7, 6 was un-installed.
I can't develop my other projects in 7, because they won't be
able to support it once I'm done (because they still have 6).
Can these two co-exist?

Hi there
I currently have the following all installed and peacefully
coexisting side by side on the same PC.
RoboHelp X5
RoboHelp 6
RoboHelp 7
RoboHelp 8
So I'm going to go so far as to blatantly claim that version
6 and 7 together will work. What you can't do is to expect to use 7
to edit projects and still use 6 to edit the same projects.
There is another issue that might be at play too. If 7 was
purchased as an upgrade for 6, the licensing probably prevents you
from leaving 6 installed and also installing 7. You would have to
have purchased full versions of each to do so.
Cheers... Rick

Can SiteMinder and OAM co-exist (SMSession and ObSSOCookie)?

Hi folks,
We currently have SiteMinder in place, but we're migrating to OAM 10.1.4.3.0. At some point, we'll need to have SiteMinder and OAM to co-exist and stand in parallel, so that we can gradually phase out Siteminder, and start protecting all of our resources with OAM. With this in mind, is there a way for the two of these access systems to co-exist? Can they share some common data, so that once user has been authenticated with SM, a cookie is created (similar to SMSession) which would then be understood by the OAM, or vice versa. This way, when the same customer accesses a subsequent resource protected in turn by OAM, the OAM (instead of authenticate and authorize user for the second time) would then read a session cookie, created by the SM and grant access. This scenario should be reversible, and also work the other way around with OAM as an entry point.
Has anyone faced the same issue?
Thank you,
Roman

For apps already protected by SiteMinder:
User get authenticated by SiteMinder; gets SMSession cookie and comes to app protected by OAM
OAM can read the cookie value and treat it as Credentials. For this you need to evaluate how to make OAM understand the SMSession cookie value.
More Info: http://download.oracle.com/docs/cd/E15217_01/doc.1014/e12488/v2authen.htm#BABEAHEB
For apps protected by OAM:
User get authenticated by OAM; gets ObSSOCookie and comes to app protected by OAM
Well, I'm not sure if this is supported by SiteMinder, but there should be some way to read the ObSSOCookie value also. Otherwise, you need to develop your own module.
If you have considerable number of applications, it will be practical if applications are migrated from SM to OAM step by step. I might be wrong with these ideas, but it will be a good experience to involve in such type of discussions. Lets see what the experts have to say on this.

Can autonomous and LAPs co-exist?

I have an existing roaming 2.4 wireless network which consists of 4 autonomous 1242 APs. I need to expand the coverage area.
Can I add a controller and LAPs with the same SSID and expect my clients to roam from the autonomous AP to the LAP?
Or do I need to replace the 4 1242s with LAPs?
Thanks

The code you would need is here:
c1240-rcvk9w8-tar.124-25e.JAO3.tar
http://software.cisco.com/download/release.html?mdfid=280237322&flowid=7588&softwareid=280775090&release=12.4.25e-JAO3&relind=AVAILABLE&rellifecycle=ED&reltype=latest
To convert the AP's, here are a few links to guide you:
Using a TFTP Server to Return to a Previous Release
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
https://supportforums.cisco.com/docs/DOC-18268
http://www.cisco.com/en/US/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918
http://www.youtube.com/watch?v=QQ_NuxdRhQ4
https://supportforums.cisco.com/docs/DOC-14960
Sent from Cisco Technical Support iPhone App

Can iPhoto and Picasa co-exist?

I am using OS X, my wife has a Vista PC, our huge photo collection is on an external NAS.
We both use Picasa to access our photos - me, I have to boot into Vista to do so, since there still is no Mac version for Picasa.
What I would LIKE to do though, is using iPhoto on my Mac while my wife uses Picasa on her PC. I guess I could use Hazel to automatically add all photos to iPhoto that are dropped into a folder on our NAS. And tell iPhoto to store all photos on the NAS. But I guess I am missing something big here, right?
Did anyone try that before? Is it possible? Or am I dreaming?

The answer is Yes... but...
If you use iPhoto in Referenced mode you can do this. Simply go to iPhoto Menu -> Preferences -> Advanced and uncheck 'Copy Files to the iPhoto Library on Import'.
Now iPhoto will not copy the files, but rather simply reference them on your NAS. To do this it will create an alias in the Originals Folder that points to your file. It will still create a thumbnail and, if you modify the pics, a Modified version within the iPhoto Library Folder.
However, you need to be aware of a number of potential pitfalls using this system.
1. Import and deleting pics are more complex procedures. You are responsible for file management. You put the pics on the NAS, you remove them yourself after deleting them from iPhoto. Essentially you're telling iPhoto 'Don't touch my pics' and this includes on the way in and the way out.
2. You cannot rename the files on your system or iPhoto will lose track of them. Nor can you move them on systems prior to 10.5 and iPhoto 08. Even with the later versions issues can still arise if you move the referenced files to new volumes or between volumes.
3. Most importantly, migrating to a new disk or computer can be much more complex.
Always allowing for personal preference, I've yet to see a good reason to run iPhoto in referenced mode unless you're using two photo organisers. But then again, you are.
Downsides? iPhoto has no cross platform ability whatever. Edits you make in iPhoto or via iPhoto will not be available to your Wife unless you export them back to the NAS. Don't move the Library to the NAS, folks have reported issues (up to and including database corruption) with Libraries on a NAS. Also, depending on the Format of the NAS there can be rare problems with the jpegs losing their file suffixes and becoming .exe files. (This can be easily repaired with a batch file renamer such as Name Mangler).
My best suggestion: create a test library. Set to Referenced Mode. Import 100 pics and see how things go. Play with it and see how things hang together or not.
Or change your wife to a mac.
Regards
TD

Can TCS1 and TCS2 co-exist on the same PC?

We are getting ready to upgrade from TCS1 to TCS2. I'd like to keep TCS1 installed until we upgrade all of our projects to TCS2. Is this possible?
Thanks
Dave

Only the FrameMaker component will peaceable co-exist with other versions -
RoboHelp and Acrobat (probably Captivate too) will not.

Can Thunderbolt and Firewire co-exist?

The question: Are there any known problems with using an external Thunderbolt drive and occasionally switching between Thunderbolt and Firewire800 (via the TB to FW adapter)?
More detail: I'm considering the purchase of a thunderbolt external drive as a backup unit for a NAS. The plan is to use the unit mainly on a Mac with a TB port. However, it would be useful to have the option to use the Firewire 800 to Thunderbolt cable if/when access to the drive must be done using a Mac with only FW800 port.
TIA.

There should be no issues that arise from occasionally using an adapter or switching between FW and TB ports in that situation. Basically, the device is just looking for a way to send and receive a bunch of zeroes and ones. As long as you give it a way to do so, it's happy.

Can EJB and BC exist at the same time in one project?

having to use ADF's BC and EJB to access data in both way due to the special requirements, but I am always getting the deployment failure.
can Ejbs and BC components exist at the same time in one project?

thanks for your reply.
I considered to separate the BC and EJB as the separate project. I just use the EJB component to implement the dynamic tree menu, whether a little make a mountain out of a molehill if you as a separate project.

Can Struts and JSF coexist?

I have a Struts based application and now I want to build an additional module on top of that using pure JSF. My question is, can Struts and JSF co-exist in the same application? If yes, what are the cons of that approach? What are the places I need to tweak in the configuration files so that they work together?
thanks,

Hi,
Yes they can coexist. Actually that's the approach recommended by Craig McClanahan. I have developed a full enterprise application (80% completed) which uses JSF in front and Struts in the back using Struts-Faces integration library (developed by Apache).
So far I haven't faced any major issues with this approach. However, I haven't try using Struts validator on JSF objects.
Read the article below on how to integrate JSF w/ Struts.
http://www.oracle.com/technology/pub/articles/masterj2ee/j2ee_wk8.html

Can only open firefox as admin, otherwise get error to say a security component could not be initilaised. Have tried deleted cert8 file but it is not recreated and still will not open

Had problems with os and now can not open firefox unless I run as admin. Error appears - Could not initialise the application's security component. The most probable cause is problems with files in your browser's profile directory. Please check that this directory has no read/write restrictions and your hard drive is not full or close to full. It is recommended that you exit the browser and fix the problem. If you continue to use this browser session, you might see incorrect browser behaviour when accessing security features.
I have tried deleting the cert8 db file but it is not recreated when I start firefox again. HD has lots of room. Can you suggest anything else to try please?
thanks, mandi

If deleting or otherwise removing the cert8.db and secmod.db file doesn't help then try a new profile.
*https://support.mozilla.org/kb/Could+not+initialize+the+browser+security+component
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

We are running firefox 3.0.5. When I log onto any of our machines I can't get Firefox to run. I get the Close Firefox popup and the message Firefox is already running

I can't get firefox to run on any machines. My colleagues can.
I can't find any trace of Firefox running and it still complains
that there is an existing firefox process running.

Also, and although possibly not related to your problem, I have to remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. On top of this, it has known unpatched bugs and security problems. I urge you to update to the latest version of Firefox, for maximum security, stability, performance and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].

Can't get firefox to autoupdate. It fails every time and I have followed your instructions to fix it

I can not get firefox to auto update. It down loads the update then fails when it restarts firefox every time. I have followed your instructions and it still fails. I have gone into the MS firewall and insured it is in the exceptions list as well as Trend micro systems. I would really like to get this fixed as I love your program. this is just driving me nuts. Thanks in advance for your help. Sure would be nice if you had phone support, I guess we get what we deserve when its for free.

Install over the existing install (will not lose profile).
Use another browser for this (IE, Chrome etc.)
* DOWNLOAD THE FULL INSTALLER: https://www.mozilla.org/en-US/firefox/all/

When clicking on links that open in a new window, the links don't open and Firefox freezes in a way. I can navigate the page I am on but cannot click to open a new tab or bookmark.

When navigating the internet, if I come across a web page that has a link to open a picture or program in a new window, if I click on it, it does not open. Firefox immediately looses functionality in that I cannot open a new tab with the mouse wheel, right click to open a new tab, or use my bookmarks in either the drop down or toolbar to navigate away. I can usually still navigate the page that I am on, for example, (https://loanconsolidation.ed.gov/AppEntry/apply-online/appindex.jsp), when it freezes I cannot click on any of the content at the center of the page but I can still use the links from the list on the far left. For an example of the pictures, (http://www.insect-sale.com/), if you click on "New Arrivals" at the top of the page it takes you to a list of products that can only be viewed by clicking on them. Usually a picture of the item would open in a small window but it does not and Firefox freezes. This has also happen when I try a view a degree audit on a school's website where a program would usually open in a new window. The only thing I have been able to find that still functions properly when this happens is the home page button. I can click on it or use the wheel to open it in a tab just fine, but if I try and go anywhere else I cannot. The only way I can get Firefox back to normal is to use the Task Manager and end the process. Another thing I have noticed, that may or may not be related; is that my Norton Internet Security toolbar, that should show up below the bookmarks toolbar and above the tabs, only shows up about 1 out of every 10 times I open Firefox. Some days it doesn't show up at all. If it does show up and I log into Identity Safe, the autofill for the programed website works, even if the toolbar doesn't show up the next time I open Firefox.

Go to Tools->Options->Apps
Here you should see two columns: Content Type on the left, Actions on the right.
Find and select excel spreadsheet or any other content type in the left column. There should be a corresponding action in the right column. What is it? You can use the drop-down list to select the option you want:
Always Ask - Firefox will ask each time: What do you want to do with this file?
Save file - Firefox will save this file to your computer
Use - Firefox will give this file to the program to open it
In case of saving, Firefox will either prompt you every time where you want the file to be saved, or save it to the default location. It depends on the preference in
Tools->Options->General->Download

All the lettlers on my desktop and in the address bar appear as symbols. Also, I can't run firefox because it keeps giving me a crash report. I'm running Vista, if that helps.

This is my parent's computer. Here are the facts: After using facebook the previous evening, the next time the computer was used all of the desktop displayed symbols instead of letters/words. Upon trying to open Firefox a window labeled Firefox crash report opened. No matter what options you choose (send report, don't send, etc) when you click on an option, another Firefox crash report window opens. So I can't open Firefox. Simple solution would be to uninstall Firefox and reinstall it; however, it is very hard to navigate the computer with no words and all symbols. I am able to open up Internet Explorer, but anything in the address bar or search bar also appears as symbols. If I were to type in a specific site in the address bar, the site will load properly in words but the address bar still shows symbols. After much playing around, I was able to update Avast antivirus and run a full scan and nothing was found. I updated Malware Bytes and ran in for an hour but it never fully finished running before I had to leave. Please help.

Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
Try to toggle some Boolean gfx.font_rendering prefs on the about:config page to disable some features.
Filter: gfx
Some to try:
* set gfx.direct2d.disabled to true to disable Direct2D
* set gfx.font_rendering.directwrite.use_gdi_table_loading to false.
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default or changed via the right-click context menu.

Can Palemoon and Firefox co-exist ??

Similar Messages

Maybe you are looking for