Can photos in a Gallery Link?

I'm making a flipbook of photos that need to refer to later text pages. How can I get a photo (or it's caption) to serve as a link to the later page? Neither the photos nor the caption text allow the use of Hyperlink (I highlight pic or it's caption text and the Hyperlink section remains, stubbornly, greyed out and inactive for anything within a photo Gallery).
Is there any way to do this? Or can anyone think of a work-around for this?
I'm trying to have a quick intro section of the book that shows off the photos for sections that follow. And all three of the first people I handed a proof to tried to tap the photo to go to the section and then when that didn't work, they looked for a link in the caption text below....
Thanks for any ideas.
Isn't iBooks Author fun?!

I don't disagree ... . I tested LR3, Ap3, and C1Pro5 for some large projects, and settled on Aperture because it's organization tools were a whole level deeper than LR's (at the time, C1P had none), and I prefered the interface. I'm no wiz at LR, but I suspect the two are pretty much dead even photo developing tools. I'm not at all tempted by LR, but I am drawn to C1P for photo developing. If I didn't have so much time invested in Aperture -- and so many Images under management -- I would look again at C1P now that it claims to be fully integrated with a DAM.
I think Aperture could be easily the best of the lot. Like you, however, I don't see Apple aiming for "best".
If you like Aperture and want to see it changed in any particular ways, send feedback. Apple may not respond the way you want -- but they certainly won't respond to things they don't hear.

Similar Messages

How can I sharpen all photos in a gallery at one time?

I want to sharpen all of my photos in a gallery at one time. How do I do this? In Lightroom, you can sync....can I do this on Aperture?

I don't disagree ... . I tested LR3, Ap3, and C1Pro5 for some large projects, and settled on Aperture because it's organization tools were a whole level deeper than LR's (at the time, C1P had none), and I prefered the interface. I'm no wiz at LR, but I suspect the two are pretty much dead even photo developing tools. I'm not at all tempted by LR, but I am drawn to C1P for photo developing. If I didn't have so much time invested in Aperture -- and so many Images under management -- I would look again at C1P now that it claims to be fully integrated with a DAM.
I think Aperture could be easily the best of the lot. Like you, however, I don't see Apple aiming for "best".
If you like Aperture and want to see it changed in any particular ways, send feedback. Apple may not respond the way you want -- but they certainly won't respond to things they don't hear.

Can I make a url link from my logo in web gallery?

I'm in LR 1.
I have a logo in the upper left in web gallery.
Can I make a url link?
Pity that clients can see the logo but cannot link to the url. thanks.

The ability to link html and flash web pages has been in LR since version 1. More specifically 1.4.1, which was the last version of LR 1.
The link, in the case of Flash galleries is placed in the box called Web or Mail link and will link from the text placed in the Contact info. In Html galleries the link can also be placed in the id plate. Many downloadable galleries have more sophisticated linking systems although some of them will not work in LR 1.4.1 (most will). Do a search for Lightroom Galleries as there are a lot about, or visit the Lightroom Exchange. All are either free or have trial versions (as does LR 3 which you can try for 30 days before buying)

Brigde CS5 in Windows 7 64bit - drops out photos in Web Gallery preview

Is there a limit to the number of photos that web gallery will display? I created a web gallery and then started over again as instructions I read stated that I should put the TITLE on each photo. Once I put the title in, out of 24 photos that use to display, only 20 now display.
Can someone explain why this is happening? I haven't even gotten to the point of trying to embed in my website yet. Perhaps Bridge isn't the best tool to use?
Thanks to anyone who can offer any insight as to why this is happening.
Daisey

And right you are! After posting this message I started reading through all the help files and finally did find the same answer. Now my problem is the linking as I have a very strange hosting set up. Two sites, same directory. So all my images have broken links. Something new to work out!
Cheers!
Daisey

Web gallery links no longer work from iWeb

I previously added links directly to my web gallery photo albums as external links in iWeb. This no longer works. For instance, I used to be able to send people to a specific web gallery album by linking to gallery.mac.com/username#xxxxxxx where xxxxxxx is the number of the album. This recently stopped working however. iWeb seems to change the # sign to %252. Anyone know what happened?
Kurt

Kurt:
FWIW here is some info I gleamed from various sites on naming sites.
Renaming a website or webpage
You can rename a site or page at any time by double-clicking its name in the site organizer and typing the new name.
The page name appears at the top of the visitor's browser.
The site name is included in the website's address (URL):
http://web.mac.com/[YourMemberName]/iWeb/[SiteName]
Renamed pages and sites (as well as the site's URL) change online the next time you publish.
IMPORTANT: If you rename a site, previously created links to your site won't work; be sure to notify your visitors, especially your blog or podcast subscribers.
Browsers convert spaces in site names to "%20." To avoid these symbols, use an underscore, hyphen, or some other character instead of a space. Also avoid non-Roman characters; many get converted to numbers when you publish.
Other characters aren't recommended for use in website names, including: forward and backward slashes (/ \), brackets ([ ]), tilde (~), exclamation point !, question mark (?), "at" sign (@), number sign (#), dollar sign ($), ampersand (&), asterisk (*), colon (:), equal sign (=), comma (,), and double quotation marks ("). Using these characters may result in names with strange numbers in them.
Hope this helps.
OT

How do I print 4x6 photos on an HP Officejet Pro 8600 Plus via Windows Photo Viewer or Gallery

Dear Experts, I've got an HP Officejet Pro 8600 printer with just one paper tray in which I loaded 4x6 photo paper.
The printer was purchased in January 2014, the latest drivers are installed. Now I would like to print a single 4x6 photo using Windows Photo Viewer or Gallery.I loaded the 4x6 photo paper into the tray as indicated by the little icon labeled 4x6in, so I suppose I got the HW part right. It's just the SW part which gives me a hard time. The available paper size options in Windows Photo Viewer and Gallerydon't include photo paper sizes, just the standard paper and envelope sizes.Hence I checked in the HP Printer Assistant in "Set Preferences" what kind of paper sizes are available, and there is exactly the same list as proposed by Gallery, missing photo paper sizes. So I guess Gallery just picks the sizes from the driver and ther are no photo paper sizes. This is an issue because I prefer to print from my PC using Win 7 or Win 8 and not from a SD card or a USB stick. Any help is very welcome, thank you in advance!

Thank you for this link! Actually I installed a brand new Windows 8 system in January 2014 and then bought the HP Officejet Pro 8600 Plus printer a few days later. To install this printer I did not use the CD that came with it but already used this link. Just to be sure that I have the latest version I again reinstalled the driver. The result is definitive: You cannot print common photo paper sizes like 4x6, 5x7, 8x10, etc. via a PC using photo SW like HP Photo Creations, MS Gallery, Windows Photo Viewer or any other SW on a HP Officejet Pro 8600 Plus. The reason is most likely that HP marketing decided that an Officejet should not be smart enough for photos, after all the company sells also Photosmarts. Because you cannot create your own formats you are limited by the driver to what is typically available in an office, in this case: A4, Letter, legal, Statement, Executive, A4, A5, A6, B54 (JIS), Envelopes #10-DL-C5-C6-A2-Monarch, Japanese Postcard, Japanese Envelope Chou #3-#4, L, 2L, O**bleep**u hagaki, Index Card Letter-A4, Edge-to-Edge Letter-A4, Env. Japanese No 3-No 4 and that's it, not more. Thank you anyway for trying to help me but in this case only the SW developers in HP can help.It would be great to be able to print from time to time a 4x6 photo on this printer like I would do.Copying photos on a USB stick or on a SD card first and then use this way to print on the printer is too cumbersome for me.

Widget can't find mobileme gallery

Question has been asked before, but is archived and not resolved. I have several mobileme galleries, but when I call up the widget in iWeb, it says I have no galleries and to post one. The galleries show up in the media browser to the side, and I can even drag one and make a traditional web gallery in iWeb. Everything recognizes the mobileme galleries except the iWeb widget to create mobileme galleries.

As you have found out that's been an ongoing problem with iWeb. You link a thumbnail photo to any one of a MobileMe gallery's modes, grid, mosaic and shown on this demo page: iPhoto/MobileMe Galleries.
Or you can embed a MMe gallery into your iWeb page using the grid or mosaic mode with an HTML snippet and iframe code like here: MobileMe Galleries
Another option is the method Wyodor developed and discusses in his past in this discussion: iWeb 3.0.3 and mobileme galleries particularly the first of the two links he provided.
OT

How can I disable a hover link in the phone view size?

Hola
How can I disable a hover link in the phone view size?
I got this site where I got a gallery page,
the pics have a hover/link state (?) where as you click in them
they will open a bigger pic. (Prettyphoto)
Thanks good.
What I want to do, is that the hover state (?)
won't show in the phone size.
I know that I will need a media queries, but I'm not sure
where or how to tackle this problem.
This is the code where I have the pics
<div class="grid_3 project-item bar">
                                         <figure class="project-img">
                                             <img src="../images/gallery_pics/memos_bar_s5.jpg" alt="Memo's Cocina & Tequila Bar" />
                                                <div class="overlay"></div>
                                                <div class="mask">
                                                   <a class="icon-image"
                                                        href="../images/gallery_pics/memos_bar_b5.jpg"
                                                        rel="prettyphoto[gallery]"
                                                        title="The Bar">
                                                        <i class="icon-search"></i>
                                                 </a></div>
                                       </figure>
                                      </div>
Thanks for your help

If you don't want a :hover state to show in the phone css of a fluid grid layout, you would remove it from the global settings and only include it in the tablet and desktop media queries.
Or are you trying to do something else?

I would like to be able to create a few icons with photos on them and linked to a persons phone number.

Hi, my father is in the middle stages of dementia and having trouble using his new iphone. I would like to be able to create a few icons with photos on them and linked to a persons phone number. This way he can select an icon and it will auto-dial that number. I did some research and an app called SBphotoDial did exactly what I need but it no longer seems to be available in the App Store. Any thoughts?

See Here for iPhoto...
iPhoto: How to move the Library to an EHD
Make sure that the EXT Drive is formatted as Mac OS Extended (journaled).
1. Quit iPhoto
2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.

I have a new Mac Pro. I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro. How do I set up the old computer?

I have a new Mac Pro. I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro. How do I set up the old computer? Both computers have OS X10.9.3. Currently they are connected by a Firewire 800 cable.

You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
Matt

How do I save a photo to my gallery that someone sent to me via text message? Thanks!

How can I save a photo to my gallery that someone sent to me via text message? Thanks!

Welcome, glad that answered your issue.

Can ObjectStates become buttons that link to another object state?

Hi. I am working on Adobe CS5 and I am trying to create an Image gallery. I know how to create the basic type which is stacking the images, making them as object states, and then linking the navigation buttons to "Next State".
The type of image gallery i'm trying to make involves thumbnails. In the thumbnails menu, there are back and forward arrows that will move the thumbnails from left to right. The way i did it was grouping the thumbnail images, convert them as object states, and just do the Left/Right animation through the Object State menu. The problem is, I can't make those thumbnails link to the picture it is assigned to. The Object states that appear in the button menu is just the object state of the thumbnails and not the Image viewer it self.
If it is needed that i post a SWF demonstration of this, can someone show me how to?

Here is a sample image
What I'm trying to do is have a scroll like action with the thumbnails and when the user clicks the specific picture/thumbnail, the enlarged image will appear on the top.
the only way i can create the scrolling action is by making the thumbnails into MOS and just change their position in each state. the problem is I can't link the thumbnails specifically to the image it is supposed to display. I hope this explanation helps.

How do I delete photos from the gallery that were downloaded from FB or google?

New user. I am trying to delete photos from my gallery in the Samsung S4. If I had taken the photos with the camera phone, the trashcan shows up and I can delete. But if I select the downloaded photos- no trashcan icon shows up. I have tried stopping sync, deleting downloads etc. It's driving me nuts!

Checking a friends S4 I see that using the Gallery app that long-pressing checks the photo and brings up a Trash Can. I see that tapping a phot opens it full screen and tapping once again brings up options to send, share, or delete. Pictures in other folders to include Bluetooth share, messaging, and screenshots produces the same results.

Adding a mobile me gallery to iWeb tells me i have no photos in the gallery

5 minutes earlier, I added a mobile me widget to my iWeb, but when i tried again, it told me to upload photos to the gallery as if I have no photos there. I tried several times more, still no success.
Can someone help?

Now that you can find the photos lets go thru the fixes again.
First:
1 - go to the System/MobileMe preference pane and log out of MMe.
2 - login with a bogus username and password like "test" and "test". This clears the caches.
3 - login with your correct username and password.
4 - launch iWeb and try again.
Next:
1 - close iWeb.
2 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
3 - go to your Home/Library/Caches/com.apple.iWeb folder and delete the contents.
4 - reboot.
5 - launch iWeb and try again.
By the way how much free space do you have on your boot drive?

How to view photos on Web Gallery?

So, on TV I go to Photo> .Mac>Web Gallery>then I type the web gallery web address (not easy with the remote)
I tried a few times, I get a message saying that Tv can't find it. Same web gallery works fine on my Mac.
Any suggestions?
Thanks,
F

Props for figuring that one out. For those who stumble on this post -- use the .mac user name without "@mac.com" -- just the user name itself.
Thanks

Can photos in a Gallery Link?

Similar Messages

Maybe you are looking for