Can Photoshop 6 documents open and work correctly in CS3 ?

I just need to know if graphics that I have created in Photoshop 6 will open and work correctly in CS3, which I will be running in Windows XP ?
I need to make sure that all of the layers will still be there, that the colors will be correct, etc... can anyone please help inform me correctly on this ?

Congrats on your move up to modern software!
Sorry, couldn't resist.
Actually, there are a lot of things to love about Photoshop CS3 as compared to 6.0.
Keep in mind you can keep them both installed, assuming you have plenty of disk space, so if you find there's something you just can't find in CS3, you can always close down CS3 and fire up 6.0 (they can't both run at exactly the same time, even though they can coexist on the same computer).
-Noel

Similar Messages

PDF opens and works correctly with Windows 8 Reader, but not with Adobe Reader. Why?

Hi,
My sister-in-law has this PDF order form from one of her company's distributors that opens and allows editing of specific fields.
The only application that opens the file correctly (visually and functionally) is the Windows 8 Reader. If I open the file in Adobe Reader or with the Mac viewer things do not line up, fonts are too large, and when editing fields sometimes symbols show up and sometimes way over-sized numbers show up.
This behavior has been observed on both a Windows 8.1 PC as well as on a Mac Book Air.
Can someone please tell me why this is happening? Is there something that needs to be configured differently?
Thanks,
Matt

This is what I see when I open that PDF in Adobe Reader 11.0.07:
Can you tell me which parts are not correct? Obviously the Submit button is a bit strange.

Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it

Adobe creative cloud has stopped working, all my individual programmes from adobe open and work fine, but when I try to open adobe cloud it starts to open then says adobe cloud has stopped working, looking for a solution then shuts down, I can not open it at all.

Without proper system information and the application logs nobody can tell you much.
Troubleshoot Creative Cloud download and install issues
Mylenium

I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)... How can I open old Freehand files on this new Mac? Can I still open and work in Freehand on this new Mac?

I have a new IMAC with a Maverick platform (I can update to Yosemite). I did all graphics on a G5 Power PC (very old), in Freehand (very old)...
How can I open old Freehand files on this new Mac?
Can I still open and work in Freehand on this new Mac?

Let me see if I've gotten this right! You want to remove an account from BOTH machines? Do this for your new machine first, then for the other.
Click the Apple logo on the top left of the screen, System Preferences, Users and Groups (under Systems), unlock the lock in the window if its locked (you need to know the password), select the user that you wish to remove, and click the - sign next to the + sign for Login options. A window will pop up with some options. Select Delete this user and securely, and click 'Delete user'.
After this, do an update from the App Store.
Thats all there is to it.
For the other machine repeat the process except for one thing. Before you delete the user in this case YOU, you will have to give Administrator priviledges to your son bu checking the box 'Allow user to administer this computer'.
Do NOT do anything from Finder ... if you dont know how to fix the consequences of the problems caused.
There is no need to unauthorize your iTunes account on your new machine. Do it on the old machine though.

I try to open I photo and I get the message, your iPhoto library is damaged...please restore from backup. But i din't made backup copy. How can i delete previous library and work wrom the new one?

I try to open I photo and I get the message, your iPhoto library is damaged...please restore from backup. But i din't made backup copy. How can i delete previous library and work wrom the new one?

Try this (assuming you're using iPhoto 12): make a temporary, duplicate copy of the library and try the three fixes below in order as needed:
Fix #1
delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your Home/Library/Preferences folder.
delete iPhoto's cache files that are located in your Home/Library/Caches/com.apple.iPhoto folder.
reboot, launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding the the Option key. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys depressed and follow the instructions to rebuild the library.
Select options #1, #2 and #6.
Fix #3
Rebuild the library using iPhoto Library Manager as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

When I have documents open and I walk away for a few minutes, when I come back and try to resume working, my computer seems to freeze up and the little pinwheel starts spinning and I literally have to unplug my computer to get it out of this frozen state.

When I have documents open and I walk away for a few minutes, when I come back and resume working, my computer freezes up and the little pinwheel starts spinning. I literally have to unplug it to get out of this frozen state. This has been getting progressively worse over the past three months. I recently took it into the Genius Bar and they could not find anything wrong. They told me to add more memory, which I did. However, the problem persists. Do you know why my computer would freeze up after the screen has had no activity for just a few minutes? My screen saver is set for an hour so I know this is not the problem.

What kind of documents? Office? iWork? Text Edit? What version?
What settings do you have in regards to power saver and/or screen saver?
For these kinds of system glitches I always recommend installing and running Onyx 'Automation'. If that does not work you should reinstall the offending software, if possible.
Onyx - http://www.titanium.free.fr/download.php?sid=d1caebc01e3207556c6d75791305ccf2

Can I use InDesign cs6 to open and work with PM6.5 files?

Can I use InDesign cs6 to open and work with PM6.5 files?

Lrak wrote: "It sounds like I should to that before endeavoring to transfer the manuscript?" (re-link)
It should be much easier to re-link in the Pagemaker file, as, with any luck, you can get the filenames from the Graphics Manager. After conversion to InDesign, any out-of-date linked images get their names converted to something like "image 123.jpg", and are themselves converted to an embedded low res representation of the image. Even vectored art. Pretty hard to figure them out, unless you are VERY familiar with the file, which you may be.
It may be that any cropping gets lost, too? I do prepress work, we do some set up for our customers, but most comes in pretty much ready to go, so I don't often have to did too deep into fixing such issues. On the other hand, any problem that can happen has probably crossed my desk, or it seems that way some days!

Open and work on FCP project file located at xsan volume

It is recommended by apple to *open and work on FCP project file located at xsan volume*
or we should open , work and save our FCP project file from local drive only .
Is there is risk of corrupting xsan volume if we open FCP project file placed in xsan volume .
where should be the location of FCP project files ??????
Mac pro 2.66 , FCP 6.01, xsan 1.4

Opening a file twice is a indeed a problem. To prevent this, and for numerous other reasons, we use Open Directory. In OD you can configure that a user can login just once (concurrently).
In old versions of xsan it was not recommended to put project files on xsan, but nowadays it works fine.
Putting projectfiles on a san has the advantage that a user can work on any client. If this is not important in your environment these files can be stored locally.

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

HT4972 i cant update my iphone 3gs to a more newer ios? it says here error! and the phone flashes some connect to itunes.. an if i connct nothing happens.. help me.. the ipgone wont open . and work pls help me thank you!

i cant update my iphone 3gs to a more newer ios? it says here error! and the phone flashes some connect to itunes.. an if i connct nothing happens.. help me.. the ipgone wont open . and work pls help me thank you!

Hello AlexCornejo,
Thanks for using Apple Support Communities.
The screen you're seeing on your iPhone indicates it is in recovery mode. Now since the device is not appearing in iTunes on your PC, first follow the steps in this article:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
After following those steps, you should be able to restore your iPhone.
Take care,
Alex H.

I was trying to open a project in adobe flash pro cc and it said there was an error opening the project. I have tried multiple times with no success, however all my other projects open and work fine

I tried multiple times, but still couldn't open my project. All my other projects open and work fine. Please help, it is important.

You will most likely get better help in Flash Professional
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?

How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size? I would like them to open at the size they were previously resized like they used to in previous operating systems. They currently open at a very small size and the first colum is only a few letters wide necessitating a resize practically every time one wants to use it. Any help would be appreciated.

hi Prasanth,
select werks matnr from ZVSCHDRUN into table it_plant.
sort it_plant by matnr werks.
select
        vbeln
        posnr
        matnr
        werks
        erdat
        kbmeng
        vrkme
        from vbap
        into table it_vbap
        for all entries in it_plant
        where matnr = it_plant-matnr and
              werks = it_plant-werks.
and again i have to write one more select query for vbup.
am i right?

Unable to open indesign after migration to new mac all other programs open and work.

Unable to open indesign after migration to new mac all other programs open and work. Why? Running Yosemite 10.10.1 Indesign CS5

The keyword is "migration." Migrating or copying files for Adobe applications usually does not work. Not all of the necessary subsidiary files are copied to the right location.
You'll need to first clean up the mess with this tool:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Then download an installer from here:
Other downloads

When trying to open lightroom I get a message that says, "The lightroom.exe that the short cut refers to has been changed or moved, so the short cut will no longer work properly. Do you want to remove this short cut? The program has opened and worked fi

When trying to open lightroom I get a message that says, "The lightroom.exe that the short cut refers to has been changed or moved, so the short cut will no longer work properly. Do you want to remove this short cut? The program has opened and worked fine in the past.

You have (probably accidentally) moved or deleted the Lightroom program. You need to find it (have your operating system search for lightroom.exe) and move it back to where the shortcut expects it to be.

I received a ms publisher file what program can i use to open and edit

i received a ms publisher file what program can i use to open and edit

There is no program that can open Publisher files except Publisher. It doesn't matter whether you use Windows or a Mac, Publisher files must have Publisher.
Publisher does not have a Mac version so you will need Windows (and Publisher)

Can Photoshop 6 documents open and work correctly in CS3 ?

Similar Messages

Maybe you are looking for