Can Photoshop Elements 6 remember Fix settings?

I got Photoshop Elements 6 with a scanner I purchased. I have never used it before and have a couple of questions about changing the default settings.
1. When I delete a photo in PE6 I always want it to be deleted from the hard drive but every time I delete I have to check the check box to do so. Is there a way to tell PE6 to remember the last setting for this?
2. Similar question for the aspect ratio setting in the crop tool. Mostly I want to use 4x6 landscape, but it always defaults to "no restriction". Is there a way to tell PE6 to remember the last setting I used for this?
Thanks,
Don

No, there is no way to remember the old settings here.

Similar Messages

  • Can Photoshop Element 9 work with Lightroom 5?

    Can Photoshop Element 9 work with Photoshop Lightroom 5?

    Hi David_B,
    Thanks for your reply! I've installed PS many times (since version 3, I think), and nothing like this has ever happened. I use and teach PS and LR for a living. The tech person I spoke with told me it is not unusual to have this happen when upgrading to CC 2014.
    What happened is that PS CC2014 would not open the image in PS if I used the Photo>Edit In>PS 2014 command unless I used Photo>Edit In>Open as Smart Object. Once opened as a smart object, PS would not save the file. I think it said Error 2.
    The tech took control of my computer, removed PS and LR and all the associated files a few times. He told me I'd have to have a high level person help me, but they didn't call me, so I phoned in. After waiting an hour to get to the correct person (not a high level tech) he said he'd have to uninstall everything again and start over and that it would take over an hour. I don't have the time right now to fix it as I'm headed out of town until the end of the month to teach LR.
    In the meantime, LR works, but I'm using a trial version that expires in 30 days. It exports to PS ok, but I had to reload all my plug-ins, and apparently LR can't find Photomatix. LR is not installed in my usual applications folder - the tech put it on my system backup drive.
    My case number is: 185696477
    Thanks so much for your willingness to help!
    Terry

  • Can Photoshop Elements handle very large files?

    I have some very large image files (up to 20,000 x 30,000 pixels).  Microsoft paint can not open them because of resource limitations.
    I don't want to do anything real fancy.  Maybe extend a square matrix with white pixels or overwrite sections with white pixels.
    Can Photoshop Elements deal with such large images, say just a chunk at a time?  Or does it require to have the entire image in memory at one time?
    Thanks.

    This note from Adobe indicates that PSE5 and PSE6 could open such a file; probably the limits for PSE7 and PSE8 are either the same, or would allow even larger images to be opened.

  • Can Photoshop Elements version 13 handle raw files from Canon camera 7D mark 2? Where can I read about it on Adobe web site?

    Can Photoshop Elements version 13 handle raw files from Canon camera 7D mark 2?
    Where can I read about it on Adobe web site?
    I found an Adobe web site note that raw plug-in version 8.7 will support Canon 7D mark 2, but is not included in Elements version 11.

    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications

  • Can Photoshop Elements 13 and Premier Elements 13 be installed/configured/patched standalone for security purposes (not linked to cloud, mobile, Microsoft, Adobe, etc)?

    We have installed a trial version of Photoshop Elements and plan to do so for Premier Elements. However, for security reasons, it is of no use to us unless we can install and use it standalone (not linked to cloud, mobile, Microsoft, Adobe, etc.). Can Photoshop Elements 13 and Premier Elements 13 be installed/configured/patched standalone as described above? If so, what do we need to do regarding installation/configuration/patching to test this?  Thanks in advance.

    Hi,
    Can you please share the logs?
    You can use the Adobe  Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
    Thanks,
    Shikha

  • Can Photoshop Elements 10 be moved to Windows 8.1? [was:Windows 8.1]

    Can Photoshop Elements 10 be moved to Windows 8.1?

    photoshop elements 10 can be installed on windows 8.1, though you may need to use compatibility mode.

  • Can Photoshop elements 13 be downloaded on 2 computers?

    can Photoshop elements 13 be downloaded on 2 computers?

    yes, all adobe single-user licensed products (including pse 13) can be installed and activated on up to two computers at any one time.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • Can photoshop elements be used for commercial work?

    Can photoshop elements be used for commercial work?

    Check with the company that does your printing to be sure that output from PSE is ok and their file format requirement.

  • Can Photoshop Elements 12 open RW2 Panasonic raw file?

    Can Photoshop Elements version 12 open RW2 Panasonic raw file?

    Yes. The 4Ti is supported in PSE11 & PSE12.

  • Can Photoshop Element 12 create new alpha channels?

    Can Photoshop Element 12 create new alpha channels? I wanted to create one to help with blurring the background and I saw the step by step on line, but I can't find where the channel panel is? I have a PC

    There is no channel panel in Elements. You could add some paths and channel features with third party add-ons like Elements+, but the real solution is to use a tutorial for Elements, not for Photoshop. There are always several ways to achieve something in Elements or Photoshop. Using alpha channels is only one way to help with blurring the background.

  • Can Photoshop Elements be used on scanned photos?

    Can Photoshop Elements be used on scanned photos?

      Yes. It’s also possible to scan directly into the application. In Elements 10, you may need to copy the Adobe TWAIN driver, if your scanner requires it, from the optional plug-ins folder to the Import-Export folder in the main plug-ins folder.
    You will need to copy the plug-in Twain_32.8ba
    Copy from:
    C:\Program Files (x86)\Adobe\Photoshop Elements 10\Optional Plug-Ins\Import-Export
    Copy to:
    C:\Program Files (x86)\Adobe\Photoshop Elements 10\Locales\en_US\Plug-Ins\Import-Export.
    On Macintosh, copy the ImportModules folder to plug-ins.
    Copy from:
    //Applications/Adobe Photoshop Elements 10/Support Files/Optional Plug-Ins/
    Copy to:
    //Applications/Adobe Photoshop Elements 10/Support Files//Plug-Ins/
      N.B. The app store version of Elements has a different file path.
     

  • Can Photoshop Elements ll be used to form panoranic merges of raw images?

    Can Photoshop Elements 11 be used to create panoramic merged images of RAW images?

    Works with my Sony RAW files.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children

  • Can PhotoShop Elements 11 save Organizer Albums in a format PE Version 8 can open/use?

    I haven't found much info on how the Organizer function in PhotoShop Elements has changed from version 8 to version 11.  I've started scanning some photos into PSE8's Organizer, and it works well, but I'm considering moving up to version 11 before doing the bulk of the project.  However, I'd like my sister to be able to use my old copy of version 8 to be able to deal with the albums I'm creating with Organizer, so I need to know whether version 11 can save its Organizer files/albums in a way that is backward-compatible with version 8.
    Anybody know?

    Thanks for the response.  I suspect that you're right about the lack of backward compatibility - I didn't see anyting in the save/backup process that looked like it was giving any option to go backwards, and I would assume that trying to open a catalog with version 8 that was created/backed up by version 11 would not end well.
    I suspect that the thumbnail creation issue was probably caused by the same setting that caused version 11 to copy all of my media files to a new location during the conversion process.  I was trying to make sure version 11 didn't change or write anything to any locations where version 8 was located, and something I did or checked during the conversion process probably caused version 11 to basically start over fresh and have to create all new thumbnails.  It wasn't that bad, and only happened that one time at the beginning - once it was done all the subsequent times I've opened version 11 have had the thumbnails there without delays.
    The biggest time-negative thing I've found so far with 11 has been the time it takes to bring up a clear picture when double-clicking on a thumbnail - I get a full size image pretty quick, but it's blurry - then a few seconds later it finally gets focussed/sharper.  I did just find a way to list the people tags down the right hand side like they were in 8 - they can't be right-clicked and added like in 8, but they can be dragged to the photo to add them so it's almost as good.
    You mention bug fixes and stuff - is there anything that the version 11 organizer actually does better than the version 8 one (in terms of handling bigger image files, or a larger number of files without choking or other such performance/stability aspects)?  I don't use Elements' editing functions (I use regular PhotoShop if I need to edit anything), and I don't use any of the web-sharing or other online aspects of the Organizer, so I'm just trying to compare how the two versions' Organizer works from a purely private, offline image scanning and cataloging perspective.
    Also, the new interface with 11 seems to be eating up almost half of my screen (side to side) - it won't let me make the left hand pane (that shows album or folder view trees) nearly as narrow as it could/should be, and because the old version 8 properties box is now part of the right-hand pane/column in 11 instead of being separately placeable anywhere on the screen, I have to make the right-hand pane very wide to be able to see and type in all the file names, notes and captions, so there's very little room left in the middle for my actual pictures to be displayed.  Are there some interface-changing options I'm missing to try to recapture some of that real estate for my photos to be shown?

  • Can Photoshop Elements Use Floating Licence?

    Hello,
    We would like to know the following:
    1. Can we acquire Photoshop Elements (PSE) 11 instead of PSE12?
    2. Can we install instead of 1 licence per PC is to set up network as floating licence? For example if we acquire 6 licences, instead of installing only to six PC, the license can be floating so more PC can access the software, but only 6 can work at given time. This is to maximize license use.
    3. Where can I talk for live support?
    I am currently located at Philippines (national capital region).
    Thanks.

    You really need to be speaking directly to Adobe about this (this is a user to user forum) but generally
    You can still get PSE11 from third party vendors but not Adobe.
    To PSE11 I believe the licence only allows installation on two computers at any one time, and only one of which can be used at any one time.
    PSE12 uses a new 'sign-in' authorisation method. You can actually install the software on as many PC's as you have, but only two can ever be signed in at any one time and therefore usable. Note though that even with two signed in the licence only allows for one to be in use at any one time.
    I doubt your network suggestion will work. Elements is really designed to be run on a standalone PC by a user with administrative rights.
    Your relevant Adobe site is their Asia Pacific region at http://www.adobe.com/ap/.
    Hope this helps.
    Cheers,
    Neale
    Insanity is hereditary, you get it from your children
    If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

  • Can Photoshop Elements 12 work with Photoshop Premiere 13?

    I already have Photoshop Elements 12 and was bought Premiere 13 for xmas and they are not recognising each other. Each keep asking if I want to download the trial version of each? I dont know if you can use Photoshop Elements 12 with Photoshop Premiere 13 so I downloaded the trial version of Photoshop Elements 13 to see if they would work together but they dont. I am trying to do a slideshow in Photoshop Elements 12 and when it comes to the output I want to put it onto a DVD and give it as a present. It does say to transfer to Photoshop Premier (which I have on my wondows 8 computer) but when I click on the link to transfer, it only gives me the option to trial it? And I already have it?

    jasperthesiamese
    Several key factors here....the new Elements Organizer 13  is markedly different than Elements Organizer 12. The Elements Organizer/Create/Slideshow of version 12 and earlier is gone and is replaced by Elements Organizer with different slideshow opportunities very much unlike what you have in 12.
    Photoshop Elements and Premiere Elements integration comes with the same version of the programs on the same computer. But, there are special considerations in this case since we are dealing with a new Elements Organizer in 13.
    However, if you want to salvage your already made Elements Organizer 12 slideshow project and open it in Elements Organizer 13, it is possible. You can also get 1080p and 720p slideshow out of it. You know that already if you have Premiere Elements 13 and its Elements Organizer 13. If interested in this salvage...on to Elements Organizer 12 catalog conversion in Elements Organizer 13.
    Elements Organizer 13
    File Menu
    Manage Catalogs
    Catalog Manager and hit its Convert Button
    In the dialog that opens, look for the name of the Elements Organizer 12 catalog.... Convert Button
    The converted Elements Organizer 12 catalog should open in Elements Organizer 13.
    When you go to double click the slideshow thumbnail (Slide Show Project) in the converted catalog in Elements Organizer 13, Elements Organizer 13 wants to convert the slideshow into the format of its new slideshow feature there. You should see
    Once the converted Slideshow opens, you will see opportunities for Edit, Save, Export including options to Play or Exit.
    If you want to get that converted slideshow into Premiere Elements, then you export to 1080p or 720p and then bring that into
    the Premiere Elements 13 Editor using Add Media/FIles and Folders.
    Please review and let me know if I have targeted your questions.
    Thank you.
    ATR

Maybe you are looking for

  • Evince and mime types

    Since the last update of evince to 0.83 it won't open pdf files no more - I get: Unable to open document Unhandled MIME type: "application/pdf" Is this a bug? I can open pdfs using kpdf or kghostview without a problem.

  • How to save the layout screen of the report in which contains subtotal

    Hi All, I developed Zprogram with 100 fields in ECC 6.0.Now i want to change the layout and save the layout. It was working fine if I select the fields which does not contain subtotals. Now I am facing the problem when I am selecting the subtotal and

  • Spool file with sysdate

    How create spool file with current date and time? I want to create spool file like xyz_28062010. Please, suggest.

  • Third party+ intercompany STO with billing ???????

    Hi Experts. Would like to take ur inputs. My Client has 2 Company Codes 1000 and 2000 The 1000 Company code has 2 Distribution Centres- A001, A002. And Company Code 2000 has 2 Sites-B001, B002. My Client 1000 Company Code procures on Behalf of 2000 C

  • Is it possible to throw an exception from a handler chain with JAXWS???

    I know I cannot throw directly an exception from the handler cause my handler extends SOAPHandler and the method handlerMessage cannot throw exceptions. The problem is that I would like to validate some authorization and if the client doesn't have th