Can Photoshop Elements handle very large files?

I have some very large image files (up to 20,000 x 30,000 pixels). Microsoft paint can not open them because of resource limitations.
I don't want to do anything real fancy. Maybe extend a square matrix with white pixels or overwrite sections with white pixels.
Can Photoshop Elements deal with such large images, say just a chunk at a time? Or does it require to have the entire image in memory at one time?
Thanks.

This note from Adobe indicates that PSE5 and PSE6 could open such a file; probably the limits for PSE7 and PSE8 are either the same, or would allow even larger images to be opened.

Similar Messages

Tips or tools for handling very large file uploads and downloads?

I am working on a site that has a document repository feature. The documents are stored as BLOBs in an Oracle database and for reasonably sized files its not problem to stream the files out directly from the database. For file uploads, I am using the Struts module to get them on disk and am then putting the blob in the database.
We are now being asked to support very large files of 250MB+. I am concerned about problems I've heard of with HTTP not being reliable for files over 256MB. I'd also like a solution that would give the user a status bar and allow for restarts of broken uploads or downloads.
Does anyone know of an off-the-shelf module that might help in this regard? I suspect an ActiveX control or Applet on the client side would be necessary. Freeware or Commercial software would be ok.
Thanks in advance for any help/ideas.

Hi. There is nothing wrong with HTTP handling 250MB+ files (per se).
However, connections can get reset.
Consider offering the files via FTP. Most FTP clients are good about resuming transfers.
Or if you want to keep using HTTP, try supporting chunked encoding. Then a user can use something like 'GetRight' to auto resume HTTP downloads.
Hope that helps,
Peter
http://rimuhosting.com - JBoss EJB/JSP hosting specialists

Photoshop Elements 7 saving large files issue

I use Photoshop Elements 7, I recently bought a new camera (24 megapixels). PSE7 is not happy, I am having lots of issues saving my work. Is anyone else having these issues?

DJ, My computer is windows 8, below are the system requirements for PSE12 - looks like it will run in 64-bit. Thanks for pointing me in the right direction!
No, you have seriously misunderstood what I said. PSE will not run as a 64 bit application under Windows. Even though you have a 64 bit version of Windows, PSE will NOT run as a 64 bit application under Windows. It will run as a 32 bit application under Windows 64bit, giving it a maximum of approx 3 GB of memory to work with. I don't know if that will make your problems go away or not. Please download the 30-day free trial of PSE 12 and see if your problems go away or not before you make a purchase.
From the system requirements
all other applications run native on 32-bit operating systems and in 32-bit compatibility mode on 64-bit operating systems

Why can't pages handle my large file?

I have a file that I'm working on in Pages that is 317 pages (currently 11,000 words. I'm getting frustrated, though, because each time I try to open it or click back into it from another program, it takes forever to load. Is there some way to clean up my document to make it faster, or something else I can do to make this opperation go more smoothly? Is pages known for having a hard time with files that big? Thank you for any help!

I'm not surprised.
I wrote many times that iWork applications are snails.
From my point of view they suffer of a huge design flaw. The behave as if they were recalculationg the entire document at every change.
Unique workaround available at this time :
split the document in smaller ones.
Yvan KOENIG (VALLAURIS, France) samedi 17 septembre 2011 17:03:35
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community

Can Photoshop Elements version 13 handle raw files from Canon camera 7D mark 2? Where can I read about it on Adobe web site?

Can Photoshop Elements version 13 handle raw files from Canon camera 7D mark 2?
Where can I read about it on Adobe web site?
I found an Adobe web site note that raw plug-in version 8.7 will support Canon 7D mark 2, but is not included in Elements version 11.

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

Handling a very larger file from Sender system

Hi Sdn,
Can you please tell me, what should be done from an SAP+XI side to handle a very large file coming from the sender system to be posted to the receiver? What should be done in XI end so that there is no problem in handling the larger file.
Thanks and regards,
Aniruddha Bhattacharya

Hi Aniruddha,
Go to below link and check point number 3.1.1 maintain parameters as mentioned in that point.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/70ada5ef-0201-0010-1f8b-c935e444b0ad

I inadvertently created a very large file. Not needing it I sent it to the Trash Can. However, the deletion process never completes. Any suggestions as to how to delete it ?

I inadvertently created a very large file on my hard drive. Not needing it I sent it to the Trash Can. However, the deletion process never completes. Any suggestions as to how to delete it ? I re-installed the OS but the file was still there taking up needed space.

Command-click all of the files you want to delete and don't actually move them to the Trash until you've gone through the entire folder.
(63341)

¿Dear Sirs, I can create with "Photoshop Elements 12", a PDF file of several pages?. I can create a "pdf" file, but not of several pages. Thank you

¿Dear Sirs,
I can create with "Photoshop Elements 12", a PDF file of several pages?.
I can create a "pdf" file, but not of several pages.
Thank you
Valentín Uriarte

This is the Photoshop Elements forum.
If you are using Acrobat, ask Here:
Acrobat

Can Photoshop Elements 12 open RW2 Panasonic raw file?

Can Photoshop Elements version 12 open RW2 Panasonic raw file?

Yes. The 4Ti is supported in PSE11 & PSE12.

Can I use Photoshop Elements 10 for RW2 files used by Panasonic?

Can I use Photoshop Elements 10 for RW2 files used by Panasonic?
Message title was edited by: Brett N

PSE supports RW2 from the Lumix DMC-GH1

Upload very large file to SharePoint Online

Hi,
I tried uploading very large files to SharePoint online via the REST API using JAVA. Uploading files with a size of ~160 mb works well, but if the filesize is between 400mb and 1,6 gb I either receive a Socket Exception (Connection reset by peer) or an error
of SharePoint telling me "the security validation for the page is invalid".
So first of all I want to ask you, how to work around the security validation error. As far as I understand the token, which I have added to my X-RequestDigest header of the http post request seems to be expired (by default it expires after 1800 seconds).
Uploading such large files is time consuming, so I can't change the token in my header while uploading the file. How can I extend the expiration time of the token (if it is possible)? Could it help to send post requests with the same token
continuously while uploading the file and therefore prevent the token from expiration? Is there any other strategy to upload such large files which need much more than 1800 seconds for upload?
Additionally any thoughts on the socket exception? It happens quite sporadically. So sometimes it happens after uploading 100 mb, and the other time I have already uploaded 1 gb.
Thanks in advance!

Hi,
Thanks for the reply, the reason I'm looking into this is so users can migrate there files to SharePoint online/Office 365. The max file limit is 2gb, so thought I would try and cover this.
I've looked into that link before, and when I try and use those end points ie StartUpload I get the following response
{"error":{"code":"-1, System.NotImplementedException","message":{"lang":"en-US","value":"The
method or operation is not implemented."}}}
I can only presume is that these endpoints have not been implemented yet, even though the documentation says they only available for Office 365 which is what I am using.
Also, the other strange thing is that I can actually upload a file of 512mb to the server as I can see it in the web UI. The problem I am experiencing is get a response, it hangs on this line until the TimeOut is reached.
WebResponse wresp = wreq.GetResponse();
I've tried flushing and closing the stream, sendchunked but still no success

Very large file upload 2 GB with Adobe Flash

Hello, anyone know how can I upload very large files with Adobe Flash or how to use SWFUpload?
Thanks in Advance, All help will be very appreciated.

1. yes
2. I'm getting error message from php
if( $_FILES['Filedata']['error'] == 0 ){
if(move_uploaded_file( $_FILES['Filedata']['tmp_name'], $uploads_dir.$_FILES['Filedata']['name'] ) ){
echo 'ok';
exit();
echo 'error'; // Overhere
exit();

Unable to copy very large file to eSATA external HDD

I am trying to copy a VMWare Fusion virtual machine, 57 GB, from my Macbook Pro's laptop hard drive to an external, eSATA hard drive, which is attached through an ExpressPort adapter. VMWare Fusion is not running and the external drive has lots of room. The disk utility finds no problems with either drive. I have excluded both the external disk and the folder on my laptop hard drive that contains my virtual machine from my Time Machihne backups. At about the 42 GB mark, an error message appears:
The Finder cannot complete the operation because some data in "Windows1-Snapshot6.vmem" could not be read or written. (Error code -36)
After I press OK to remove the dialog, the copy does not continue, and I cannot cancel the copy. I have to force-quit the Finder to make the copy dialog go away before I can attempt the copy again. I've tried rebooting between attempts, still no luck. I have tried a total of 4 times now, exact same result at the exact same place, 42 GB / 57 GB.
Any ideas?

Still no breakthrough from Apple. They're telling me to terminate the VMWare processes before attempting the copy, but had they actually read my description of the problem first, they would have known that I already tried this. Hopefully they'll continue to investigate.
From a correspondence with Tim, a support representative at Apple:
Hi Tim,
Thank you for getting back to me, I got your message. Although it is true that at the time I ran the Capture Data program there were some VMWare-related processes running (PID's 105, 106, 107 and 108), this was not the case when the issue occurred earlier. After initially experiencing the problem, this possibility had occurred to me so I took the time to terminate all VMWare processes using the activity monitor before again attempting to copy the files, including the processes mentioned by your engineering department. I documented this in my posting to apple's forum as follows: (quote is from my post of Feb 19, 2008, 1:28pm, to the thread "Unable to copy very large file to eSATA external HDD", relevant section in >bold print<)
Thanks for the suggestions. I have since tried this operation with 3 different drives through two different interface types. Two of the drives are identical - 3.5" 7200 RPM 1TB Western Digital WD10EACS (WD Caviar SE16) in external hard drive enclosures, and the other is a smaller USB2 100GB Western Digital WD1200U0170-001 external drive. I tried the two 1TB drives through eSATA - ExpressPort and also over USB2. I have tried the 100GB drive only over USB2 since that is the only interface on the drive. In all cases the result is the same. All 3 drives are formatted Mac OS Extended (Journaled).
I know the files work on my laptop's hard drive. They are a VMWare virtual machine that works just fine when I use it every day. >Before attempting the copy, I shut down VMWare and terminated all VMWare processes using the Activity Monitor for good measure.< I have tried the copy operation both through the finder and through the Unix command prompt using the drive's mount point of /Volumes/jfinney-ext-3.
Any more ideas?
Furthermore, to prove that there were no file locks present on the affected files, I moved them to a different location on my laptop's HDD and renamed them, which would not have been possible if there had been interference from vmware-related processes. So, that's not it.
Your suggested workaround, to compress the files before copying them to the external drive, may serve as a temporary workaround but it is not a solution. This VM will grow over time to the point where even the compressed version is larger than the 42GB maximum, and compressing and uncompressing the files will take me a lot of time for files of this size. Could you please continue to pursue this issue and identify the underlying cause?
Thank you,
- Jeremy

How do I control read start position in a very large file where start byte position may be larger than I32 (+/- 2^31)?

Using LabView, I am trying to read a very large file which may be on the order of 2^32 bytes. I need to be able to step into the file at a byte position which may be greater than the I32 limit set by the read file.vi. Are there any options to the read file.vi or a method of circumventing this limitation?

I'm not sure but i think that you can manage the "pos mode" in the "seek" sub-vi.
The "pos mode" let you choose the initial position to add the numbers of bytes you want to move.
I think that you can add a i32 number from the "initial" in the "pos mode" an latter use the "pos mode" in "current" to add another value. Then the next time you can move more than 2^31 bytes to the initial position.
I hope you understand my idea, i wasn't try it before, but i think that would work.

Exporting to iTunes results in a very large file

I have been making music on Garageband and when I export it to itunes, it becomes a very large file. This makes disables me from being able to post my music on my website or email it. What can I do to make the file smaller?
imac G5 Mac OS X (10.4.5) 1.9 GHz PowerPC G5

You should convert your file to an MP3 in iTunes:
- Make sure that in the import options of iTunes, MP3 is selected.
- Mark your song in iTunes and select "convert to MP3" in the menu.
- This creates a new file in iTunes with the same title. If you don't know which is which, apple-I will tell you if it's an AIFF or an MP3, and the file size.

Can Photoshop Elements handle very large files?

Similar Messages

Maybe you are looking for