Can PhotoStream Be Set Up to Work in Only One Direction?

I’d like any photos I take on my iPhone to be save via PhotoStream on my iMac, but I don’t want the photos I put on my iMac to appear on my iPhone. Is that possible? Should I turn off PhotoStream on the iPhone or iMac?
I just returned from a trip, imported 300 photos on my iMac, and they have all appeared on my iPhone, filling up all the available capacity of the iPhone. I don’t want to mistakenly remove photos from iPhone and have them removed from iMac as well.
Thanks.

. BTW, is there any way to delete trash on iPhone as in OS? I'm worried that photos in iPhone trash may still be taking up space.
Thanks again.
You're welcome.  What is the system version on your iPhone? iOS 8 has indeed a Trash. When you trash a photo in the Photos.app in iOS 8, the photos will be moved to the "Recently Deleted" album.  Open this album and select the photos to delete permanently.

Similar Messages

  • I want to bcc myself when sending mail from one account but not another. When I check "automatically bcc myself", it bcc's me from both accounts.  Can I set this to work with only one account?

    I have two mail accounts on my Mac.  I want one account to bcc me when I send emails from that account.  I checked "automatically bcc myself" under mail>preferences>composing, but both accounts bcc me when sending mail.  Can I set this to only bcc myself from one specific email account? Thanks.

    It does not make sense that your ssh does not have a dash capital Y (-Y) option. It is in "man ssh", and my 10.6.6 has the -Y option, and I've had a -Y option since at least Tiger (10.4) days.
    My ssh is in /usr/bin/ssh
    I'm not very good at X11 issues, so I'm just throwing ideas out there.
    Does your broken account have a $HOME/.ssh/config file, and if so, what is in it?
    Does the broken account have any $HOME/.x* or $HOME/.X* files that X11 might be reading to configure your X11 behavior differently from the new test account?
    $HOME/.Xauthority
    $HOME/.Xdefaults-<hostname>
    $HOME/.Xresources
    $HOME/.ICEauthority
    $HOME/.keymap.km
    The above are a few names I found looking through "man X"
    While I'm thinking about it, I assume that when going to the server, you are using the exact same user account on the server, so that you have a constant at least at that end.
    Have you tried trashing your
    $HOME/Library/Preferences/org.x.X11.plist
    file, to see if that is affecting the broken account?
    Again, I am just throwing out ideas to see if anything sticks.

  • Creating iphoto book and can't seem to view/ work on only one page at a time.

    I am creating an iPhoto book and can't seem to view/work on only one page at a time.  The Navigator, that allows you to focus on a part of the page is actually 1 1/2 pages in size so 1 1/2 pages are in view when trying to work on one page.  What am I doing wrong or how can I fix this.  It is very distracting viewing half of a previous page when trying to create a new page and write a story to go with the related pictures.

    My Navigator seems to be to large.  It covers 1 1/2 pages while in the training information it shows as the size of one page.  Is there a way to adjust the size of the Navigator?
    You can hover the mouse over the left border of the Navigator - then the cursor will turn into a resize cursor and you can drag the border and make the Navigator panel smaller by enlarging the source list.
    Or drag the lower right corner of the iPhoto window and shrink the appliaction window. This will only make the navigator smaller - the source list and information panel will stay the same size.
    Regards
    Léonie

  • How can I set two different emails in only one contact form?

    How can I set two different emails in only one contact form?

    To enter multiple email address with the Contact Form Widgets:
    Click the Options icon for the selected widget, then
    In the Email to box, enter multiple emails by delimiting them with a semi-colon. For example: [email protected];[email protected]
    Cari

  • How to set the font size on only one object!

    I wonder how i could programmatically set the font size on only one object?
    Igor Stojčević

    Hello,
    You can use the builtin SRW.SET_FONT_SIZE
    http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/plsql/builtins/srw/srw_set_font_size.htm
    in the Format trigger
    http://www.oracle.com/webapps/online-help/reports/10.1.2/topics/htmlhelp_rwbuild_hs/rwrefex/plsql/triggers/tr_format_trigger.htm
    Regards

  • I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpaid the first before pairing the second. How do I unpair?

    I have lost the remote that was paired. I bought another remote, but the procedure to pair the new one does not work. I suspect the the AT will work with only one remote at-a-time and i have to unpair the first before pairing the second. If this is true, how do I unpair? If not, what can I do?

    I was premature in posting the question. I found the answer in andother posting, and it was successful.
    Thanks, and sorry for the false alarm.

  • What do I do if someone is hacking into my Game Center so I can't play clash of clans anymore because only one person can play at one time?

    What do I do if someone is hacking into my Game Center so I can't play clash of clans anymore because only one person can play at one time? I changed the password but soon discovered it didn't help. I want to play Clash of clans but every so often the person comes back on. is there a way for Game Center to log off all the accounts, so the hacker will be gone?
    Please help me with this problem

    Your iPad can be hacked only if it's been jailbroken.  Has it?

  • Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

    Why won't my iMessage work with only one contact in my phone all my other iMessages send and they just got an iphone but all their iMessages are sending also. I've tried restarting my phone, deleting messages, contact, restarting network

    Hello Jesslb23,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    To resolve issues with sending and receiving iMessages, follow these steps first
    Check iMessage system status for current service issues.
    Go to Settings > Messages > Send & Receive and make sure that you have registered iMessage with your phone number or Apple ID and that you have selected iMessage for use. Learn more about troubleshooting iMessage registration if the phone number or Apple ID isn't available for use.
    Open Safari and navigate to www.apple.com to verify data connectivity. Learn more about troubleshootingcellular data or a Wi-Fi connection if a data connection isn't available.
    iMessage over cellular data might not be available while on a call. Only 3G and faster GSM networks support simultaneous data and voice calls. Learn more about which network your phone supports. Go to Settings > Wi-Fi and turn Wi-Fi on to use iMessage while on a call if your network doesn't support simultaneous data and voice calls.
    Restart your device.
    Tap Settings > General > Reset > Reset Network Settings on your iPhone.
    If you are still unable to send or receive an iMessage, follow these steps
    Make sure that the contact trying to message you isn't blocked in Settings > Messages > Blocked.
    Verify that the contact you are attempting to send a message to is registered with iMessage.
    If the issue occurs with a specific contact or contacts, back up or forward important messages and delete your current messaging threads with the contact. Create a new message to the contact and try again.
    If the issue occurs with a specific contact or contacts, delete and re-create the contact in the Contacts application. Create a new message to the newly created contact and try again.
    Back up and restore your device as new.
    Best of luck,
    Mario

  • My imsg is not working with only one person and her imsg is working perfectly fine with her friends

    My imsg is not working with only one person and her imsg is working perfectly fine with her friends

    See this thread:
    https://discussions.apple.com/thread/5306216?tstart=0
    From Apple:
    MacBook Air (Mid 2013): FaceTime HD Camera might not work after OS X 10.8.5 update
    Yes, a fix is coming soon.

  • Why can't I set-up my work e-mail account?

    I am having trouble setting up my work e-mail account (Outlook 2003)? I have downloaded mail 2003 for Outlook 2003 (someone recommended this app) and tried enterprise setup but I keep getting the error message "unable to verify account information".  I am able to get my personal e-mail without difficulty. Does anyone have any suggestions?

    Are you sure you are using the correct settings for you work email - correct mail servers, etc? It might be helpful to ask your tech department at work for the specific information you need for your account.

  • IWeb hyperlinks working on only one page

    Hi,
    I'm building a website with iWeb - www.dariusenakim.nl
    It's in Dutch so the words won't mean anything to you but it's a fairly simply product with just four pages in total:
    Home, Work, About Us, Contact
    When you go to the site you arrive at Home (I did not make it so, this was default. I guess it recognized the Home.html? - another question) and all the hyperlinks at the top work. However whenever you click on one you go to the directed page but there the exact same hyperlinks are not recognized as hyperlinks any more. It's the exact same lay-out for all pages but only one of four is working!
    Can anyone help me solve this problem? I've already tried moving the images up or down (the whole header-layer discussion) but it doesn't make any difference and the lay-out as it is seems to be working flawlessly on the first page (home), so why not on the others? I've also tried not using links to internal pages but external links to the actual website address but no difference: only the first page is working.
    The really strange thing is that I have an alternative Home page set up: www.dariusenakim.nl/Home_Alt.html
    This was just a test to see if we wanted another lay-out but we didn't go for it. However on this page the hyperlinks are also working!!
    Please advice. Thanks in advance.
    ps. iWeb 3.0.4 (304) developped in 2011

    Hi Wyodor,
    If that was the case why would the exact same lay-out work on the first 2 pages but not on the others? Does the body layer alter its size randomly so that sometimes the images are in the wrong layer and sometimes not? Even with duplicating the exact same page?
    Will try later tonight anyway but like I said: it doesn't make any sense it's 4 times the same page with just different content beneath it...

  • Time Delay works for only one step

    HI
    I have a vi (not programmed by me but I was told to make few changes in it) in which there is a time delay. When I apply time delay it works for the first step and the delay doesnot work for the later steps. I tried to make few changes but it is effecting the other parts of the vi. I'm fairly new to Labview. Could someone please tell me what modifications do I need to do for the time delay to work perfectly. Thank you in advance
    Best Regards
    Pratheek
    Attachments:
    vi.zip ‏334 KB

    Jeff·Þ·Bohrer wrote:
    crossrulz wrote:
    Your Time.vi is set to be non-reentrant.  What this means is that only one instance of it can run at a time.  So if you call it twice, the first one will start running but the second call must wait until the first is complete before it can start.  To change the reentrancy, go to the VI Properties and then to the Execution section.  You want to choose "Shared Clone Reentrant Execution".
    Pre Allocated
    Get them their own data space so the local variable doesn't bang its head
    I knew somebody was going to say something there.  They really don't have their own data space that they need to maintain.  So it doesn't really matter which reentrant type they choose.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • Touchpad and keyboard aren't working properly][Only one battery charges

    When charging cable is plugged in, I have no problems, but when I detach it, keyboard and touchpad stops working.If I put my flashdrive into keyboard dock it will do sounds like it's connecting and disconnecting looped. And the second weirdness: it shows that I don't have the second battery.. I checked it in bios and there were displayed two batteries(32wh and 33wh)..I wonder if it's really only one battery charging all the time..  I just bought it yesterday and it is killing me..

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Split 13-m010dx x2  and issues with the charging while detached. When the Tablet part is detached you will not see the other battery and it will not charge as it is detached. The setting you have it on will drain the battery very quickly, Change the setting from High performance to Hp recommended will help. Here is a link to update the battery. Here is a link to troubleshoot the battery. Plug the power adapter directly into a functioning wall outlet. Do not plug it into a power strip, surge protector, or secondary power source as this could cause and issue. The keyboard and TouchPad will not work when the Tablet is detached. This is by default. If this does not help, please use the following link to create yourself a case number, then call and it may help speed up the call process:
    Open link: www.hp.com/contacthp/
    Case number and phone number appear.
    They will be happy to assist you immediately. Thanks.

  • JMS Queue working with only one AIA instance.

    Hi,
    We are having a Web-Logic JMS Queue configured for an instance. I have developed a consumer in AIA instance to pull the messages from the Queue.
    And this works fine.
    Now I have an another instance consumer which is pointing to the same Queue, but it fails to get the messages from it.
    I have switched off the consumer in the FIRST instance, but even then consumer from the SECOND instance was not able to pull the messages.
    Later, I tried switching on the consumer of the FIRST instance, and all the messages were pulled in this instance.
    So how can I make it work with two AIA instances and one JMS Queue, provided only one AIA instance consumer is active at a time.
    Thanks in Advance.
    Regards!

    * Likely your best bet is to check your server logs for "Error" and "Warning" messages, and/or, since these questions are specific to AIA's usage of JMS, post your questions to the AIA newsgroup.
    * WL JMS does not impose a limit on the number of consumers on a queue, but it does only allow one named connection with the same "client id" to connect at a time. Its unusual to name connections in queueing applications, but possible - and AIA may be doing this. (If this is the problem there should be "client id in use" style log messages or exceptions.)
    * Another possibility is a misconfiguration of your remote consumer. Make sure the URL is correct, and remember, if an application is running in the same cluster as the remote destination, don't specify a URL.
    * Also, if the remote consumer is running in a different domain, make sure the domains are named differently, and that no two JMS servers in the two domains have the same name (as per the unique naming restrictions documented in the Best Practices section of the JMS configuration guide -- http://download.oracle.com/docs/cd/E14571_01/web.1111/e13738/best_practice.htm#CACJCGHG ).
    Regards,
    Tom

  • Mail does not work with ONLY ONE e-mail address

    I am using mail with 6 different e-mail addresses all using godaddy as my mail server. Some(4) are imap, some(2) are pop3.
    All of my e-mails work great except for 1 (which is imap). My iPhone and iPad as well as entourage all work for this e-mail address. It is only Mail that does nto work all the time.
    This is the frustrating part. It works some times, and not others. No rhyme or reason to it. When it is not working, the only way to make it work right away is to delete the account and re-install the account. Some times, it will just start working on it's own. The worst part, is whenever I bring it in to a genius to look at it, it starts working, and of course, they say nothing is wrong.
    Any thoughts on how to fix this???

    Okay, it works the same way for me. I'm not sure whether "open all" will come back in that case, where there's only one bookmark. Does it slow down your workflow a lot to middle-click on the bookmark itself instead of on the folder?
    Requests for feature changes get a bit lost here in the support forum. You can submit suggestions in one or more of the following ways:
    (1) Feedback site: https://input.mozilla.org/feedback
    (2) Developer mailing lists (sometimes hard to figure out which one is best): https://lists.mozilla.org/listinfo
    (3) Bug tracking system (yours would be a request for enhancement): https://bugzilla.mozilla.org/ and https://developer.mozilla.org/docs/Mozilla/QA/Bug_writing_guidelines
    With all the bookmark-related extensions out there, it's possible someone has posted one that adds this feature back, but I haven't searched.

Maybe you are looking for