Can play fine on browser, but some .wmv's only play back 1 second??

Gentlemen,
Ive noticed that a couple of websites that have only .wmv available to download movies. I am running a Mac G4 with OS Tiger and Opera for the net. I can easily play wmv's with QTpro and or VLC.
The movies that I typically DL are usually 300 to 400 megs. They completely on DL on my browser (Opera, Safari, or Firefox) after about 10 minutes or so. However once I DL the .wmv files onto my harddrive , they show up at only about 3 or 4 kb!!?? So thats about a total of like .2 seconds of play back!!??
I believe this is not an Apple vs Windows issue, but something else. Any ideas?
Thanks guys!

.wmv are Windows Media Files, for which you need:
Flip4Mac WMV Player from
http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
If you don't have it already you should also get
Perian from http://perian.org/
You should read this support page http://perian.org/#support in case you need to delete older codecs.

Similar Messages

My wireless earbuds work just fine, but some third-party apps play audio only through the iPod speaker even though the buds are properly connected.

My wireless earbuds work just fine, but some third-party apps play audio only through the iPod and iPhone speaker even though the buds are properly connected. Does anyone know why and is there a solution?

Assuming you are using Bluetooth headphones, do the apps have the option to use Bluetooth?
The app should have an option to select the speaker (or wired earphones) or the Bluetooth headphones.
You can also try:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

MP4 Plays Fine in Quicktime, but Audio Lags Near Clip's End in WMP. Huh?

This is weird. I've made several MP4s in Premiere Pro CS6, some only 10 minutes long, and the audio goes a bit out of sync (lagging behind) only in WMP, not Quicktime, when playing the rendered MP4. QT plays it all just fine. Is there something needing to be set in Premiere or AME to make it all stay sync'ed and play fine in any player?
Quick backstory: I shoot 1920x1080p DSLR video at 24fps (23.97#) and I capture audio separately on a Tascam portable at 24-bit 96kHz (which is think is 29.97) and toss it onto a Pr Pro CS6 timeline. I do use the cruddy camera audio just for syncing then ALT+Click to separate the camera's audio track and delete it, leaving the now-synced good audio in place. Then I toss a few transitions and effects (mostly color grading) on the video, nothing fancy, and export out an .MP4 from Premiere which of course fires up AME. I think the problem is the preset I'm picking. A screenshot of my AME settings is attached. I am using one of the presets for Apple TV/iPad/iPhone which is basically renders the video down to 1280x720p with H.264 compression (no surprise that Quicktime plays it back without issue). I'm assuming a codec comes into play here, or just WMP being stupid? I know what a codec is but I don't Premiere which one to use (I assume you can), so if that's the answer please elaborate a bit when you answer, lol. I'm a seasoned photographer and a fairly green video editor (and a lousy video shooter, lol!).
As a further test, I sent the timeline out to an MP4 again but this time I simply chose H.264 and picked the HD 23.976 1080p preset which does use different VBR, etc. That video plays fine in both, but a 10-minute MP4 is almost 2GB! I was hoping for something in the 100mb-150mb range so I could YouSendIt out to people, and the lousy AppleTV/iPhone 4 720p H.264 preset does give me a filesize in that range.
Any thoughts on what to set to get a workable filesize of <200mb with a 720p clip that actually works in WMP as well as QT? I hope I'm even asking the question correctly.
Thanks!

Harm, I didn't pay attention to those settings, I should have. I got hung up in the preset names and figured those were my only choices. How green I am, lol. I made a preset with a Target of 4 (max 6) and VBR 1 Pass, and I knocked the audio down to 128K being it's just speech, and it all worked great. The new file plays in both players perfectly and also plays on my iPad with no jitter. Filesize is about 240mb but that's fine, it works. Problem solved and in the books. BTW, I use a GTX570.
Jim, I agree, VLC is super, it was the only player that would play 5D Mark II files right out of camera back in 2008, on my dual core Dell laptop with a cheesy Nvidia 7900 graphics card. Problem is, the majority of people I'm sending these MP4s to are Mums & Dads in our church, etc, and you know quite well that those folks are running some consumer Dell or HP setup they bought at Costco on closeout.
Funny backstory, when the 5D2 came out in Sept 2008, that was what thrust me into video. So I immediately bought the Prod Premium CS4 Suite (already owned Photoshop for a few years being a stills guy) and installed it on that Dell 17" laptop I mentioned above. After getting the 5D2 finally in Jan 2009, I actually had the nerve to take my first attempt at creating a video in Premiere and encoding it on that laptop. I literally had to kill AME partway through because I was seconds away from burning out my processor (I had been using RealTemp because of how hot that thing ran using Word, lol). It was that event that made me convince myself to start researching how to build a real editing PC (using an i7 920 at the time). I probably drove Harm nuts back then with all my questions, lol! But this rig has been my workhorse and has been through countless upgrades, the only thing remaining from the original 2009 build is the case and the power supply.
I know, you guys didn't need all that info, just felt like shooting the breeze. Thanks again!

Downloaded an E.P. and all of the songs play fine except one which skips itself. The play count goes up and if I click later in the song it will play, but it doesn't play automatically, how do i fix this?

Downloaded an E.P. and all of the songs play fine except one which skips itself. The play count goes up and if I click later in the song it will play, but it doesn't play automatically, how do i fix this?

many thanks.
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

I have video embedded in a PDF, it plays fine on desktop but won't play on iPhone or iPad

I have video embedded in a PDF, it plays fine on desktop but won't play on iPhone or iPad, is there a workaround? From what Ive seen through Google searches, I dont think there is but wanted to reach out to the pros.
thank you for your help!!

Read this:
http://forums.adobe.com/thread/982072?tstart=0

I've just downloaded a sd movie from iTunes with my ipad but the movie will only play for 13s then a msg comes up saying "could not load video! I've paid for it and downloaded the whole thing ! Can anybody help me pls?

I've just downloaded a sd movie from iTunes with my ipad but the movie will only play for 13s then a msg comes up saying "could not load video! I've paid for it and downloaded the whole thing ! Can anybody help me pls?

Hello Lcw2610,
I would recommend deleting the affected movie from your iPad, and redownloading the movie.
How to delete content you've downloaded from the iTunes Store, App Store, iBooks Store, or Mac App Store
http://support.apple.com/kb/HT5772
Download past purchases
http://support.apple.com/kb/HT2519
If the issue persists, please do report the issue to the folks in our iTunes Store.
To report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase, follow these steps:
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Cheers,
Allen

I have a .mov file that plays on my mac but when someone tries to play it on a pc, they get an error 128 message. Help!

I have a .mov file that plays on my mac but when someone tries to play it on a pc, they get an error 128 message. Help! Please!

This is not the problem. We are using quicktime on the pc's and the mac. I also tried to open the file on the pc with other programs and it doesn't recognize the file. The file opens fine on my mac but I cannot save it as a new file. It says that "the end of the file was reached." The recording was made in iShowU then edited in Quicktime Pro.

I have gmail and hotmail account on my macbook. In gmail I can visualize all the mailboxes but in hotmail i only can see the inbox ¿how can I visualize the rest of the mailboxes? thanks

I have gmail and hotmail account on my macbook.
In gmail I can visualize all the mailboxes but in hotmail i only can see the inbox ¿how can I visualize the rest of the mailboxes?
I have the same problem with my ipad; the solution would be the same?
thanks

Hello Sophie59
You should be able to see two different tabs when setting up the email if you go to Other > Add Mail Account. Once you enter in the email address and password, you should be at the next screen to provide more details about the email as far as incoming and outgoing servers and at the top there will be a blue section to add it in as a POP or IMAP email account. Check out the article below for further troubleshooting and emails setup options.
iOS: Troubleshooting Mail
http://support.apple.com/kb/ts3899
iOS: Adding an email account
http://support.apple.com/kb/ht4810
Regards,
-Norm G.

TS3999 How do I print from i cloud? I can access and add appointments but cannot print. Only a blank page shows up.

How do I print from i cloud? I can access and add appointments but cannot print. Only a blank page shows up.

Select the day. then look on the bottom left where you will see the word, TODAY, select it then select print frame.

I have an iPad 4th Gen with Retina Display. I want to watch movies on an airplane. I downloaded downloaded one movie successfully from digital copy, but my next movie only plays when I am connected to wifi, and the other one is the same way now

I have an iPad 4th Gen with Retina Display. I want to watch movies on an airplane. I downloaded downloaded one movie successfully from digital copy, but my next movie only plays when I am connected to wifi, and the other one is the same way now

Hi there slogrown,
You may need to download these purchases directly to the device. Take a looke at article below for more information.
Downloading past purchases from the iTunes Store, App Store, and iBooks Storehttp://support.apple.com/kb/HT2519
-Griff W.

I recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?

recently updated to the latest version of Itunes (11.1) and when i try to play music or tv shows, the sound lasts only for a second before going completely mute, anyone know how to fix this?

Check this thread out -> iTunes 10.4 & Multimedia Keyboard
It doesn't look like there is a fix yet, but some people in the thread are pointing to this workaround:
pikot wrote:
Following some suggestion i seem to have found a solution for the problem and my play/pause, next and previous buttons work with iTunes 10.4.1
- You need to open a text editor (like notepad) as an administrator.
- Open the SetPoint players.ini file (C:\Program Files\Logitech\SetPointP\players.ini)
- Edit the line under the [Players] section to match the line bellow (bold is the wndClass which is to be changed)
iTunes=wac,iTunes.exe,ITWindow,xxx,xxx,xxx,xxx,xxx,xxx,xxx,0,1,iTunes
- Save the file
- Restart the SetPoint and hopefully play/pause, next and previous buttons should work (at least they work for me)

Song corrupted in iPod while plays fine in iTunes, but can't be re-imported

I have a play list of MP3 songs that I created from the same CD. They have played for a long time in my iPod (probably iPod 3) until today when I wanted to edit them (change "Composer"). One song just won't change. After inspection I discovered the "info' was grayed out. When I tried to play it, it won't play.
When I played the same song in iTunes, it played fine. I deleted the song from iPod (not sure what Apple was doing. Did it delete the song, or just remove it from the list?), then re-import again. Same problem. When I look at it in iPod alone, the song disappeared. Just to note that I can see it in iTunes when I connect my iPod to my PC.
I can assure you the song is fine (the ine in my PC), compatible with iPod (mp3, part of a group that all work), not such thing as read-only etc. What's going on and how do I fix this?

Other similar cases:
https://discussions.apple.com/message/2864108#2864108 (very old post, has comments, but no help from Apple)
https://discussions.apple.com/message/11487143#11487143 (recent post, has no comment)

Video plays fine in iMovie but not in Web Gallery ?

Hi
I managed to import some small video clips to iMovie 08 using Streamclip (converting to .dv files).
The movies play fine in iMovie - no problems. However when I publish to Mac Web Gallery (I only published "mobile" size), one of the videos always hangs at the same point. The clip starts playing but you can see the clip stop loading and then it stops playing at the exact same point about 3 minutes in.
The Web Gallery says the clip is 4mins 36secs long but it never plays it in full. I've removed from Gallery and republished. I've also deleted the project and started from scratch. Both have failed to cure it.
Also tried it in Firefox 3 and Safari - same result.
Why is Mac Web Gallery struggling to play all the clip?
Thanks for any input!
Martin

Which version of iMovie?
If you are on version 8.0.6, this is probably due to the use of speed changes like fast motion or slow motion.
If you have speed changes in your project, you need to stick to the pre-set tick marks of 25%, 50%, 100%, 200%, 400%, 800%, etc. If you use a custom percent like 58% or 139%, you will get weird audio behavior in your final product.

Large .dv file plays fine in Quicktime, but audio out of sync in iMovie??

hi,
i'm trying to convert some old analog 8mm tapes to digital. to do this, i'm using a sony trv320 camcorder with firewire feeding iMovie '08. i've imported an entire 2 hour tape into iMovie, and everything is fine except that at some point, the audio gets out of sync from the picture. i've opened the huge 24 GB .dv file in Quicktime, and everything is in sync, so I assume this is some kind of problem related to iMovie. i've done lots of searching on this and have made sure that the camcorder is sending 16 bit audio out. i also tried using mpeg streamclip to split the huge .dv file into smaller parts, but this resulted in the same audio sync problem (which is weird).
is my only option to manually import my tapes 10 minutes at a time? please say no
the most puzzling thing about this is that the huge .dv file is perfectly in sync all the way through when playing back in Quicktime.
i'm at a loss!! hope someone can help.

I've edited in FCP and exported with compressor with all the appropriate settings, to mpeg 2.
Double check to make sure that you edited in Anamorphic and also encoded as 16:9 video not 4:3 - also make sure you set the Track to 16:9 Letterbox in DVD SP.
What encoding rates did you use for the video and audio? Sometimes if the rates are too high it can cause drifts.
On the audio side, did you export the FCP as self contained and make the audio AC3? Also you can try just exporting the audio as an AIF and encode that as an AC3.
How did you burn the DVD (Speed and Media used?) Sometimes bad burns/media can cause issues.
Also look at these threads
http://discussions.apple.com/thread.jspa?messageID=3131142&#3131142
http://discussions.apple.com/thread.jspa?messageID=1872235&#1872235
http://discussions.apple.com/thread.jspa?messageID=1363574&#1363574
http://discussions.apple.com/thread.jspa?messageID=1086775&#1086775

Only parts of my songs from itunes match are downloading onto my phone. The full song plays fine on computer but not on iphone

I recently purchased Itunes match to download some of the songs from my library onto my phone. Everything downloaded fine. At least I thought, until I tried to listen to my music on my phone. I found that some of the songs that were downloaded from the itunes match are not fully there. The full song plays fine on my computer, however on my phone it will only play a part of the song and then immediately cut off and skip to the next song, while the display still says the other song should be playing. I tried turning off the itunes match and just re-synching the music from my computer itunes library to my phone but still encounerted the same problem. Is there an easier way of fixing this, or do I have to basically restore my whole phone?

Did you let the scan in iTunes finish before you enabled the service on the iPhone? If not you need to. Disable iTM on the iPhone, then launch the Music app and let the content clear out. Once the scan is complete in iTunes re-enable iTM on the iPhone.

Can play fine on browser, but some .wmv's only play back 1 second??

Similar Messages

Maybe you are looking for