Can PO communication language be controled through User parameter?

Dear,
I am importing material from internal vendor.While creating PO the system is giving Error "No short text maintained in language DE ".After analysis i got to know that it is due to miss match between vendor communication language and material master description language.Now we can not change vendor master communication language form DE to EN because the vendor general data is maintained by the Germans and as per the logic it should be in thier local language.The next thing is we do not want to extend material description in language  DE as it may confuse Indian user.So kindly guide  how to resolve this issue?
Is there any user parameter to control this language error?
Regards
Dina

what you describe is like you want go swimming without getting wet.
No, you cannot control the language from a user parameter.
you have to maintain the material descriptions in any language that is used as communication language in vendor master.
A communication language should always be a language that could be understood by both parties, you and your vendor.
a common used vendor should have EN as communication language.
There should be a design concept in your company for such cases, otherwise it is a gap and needs to be closed with a decision that one of the effected parties does not like.

Similar Messages

  • Budget Control through User status

    Dear all,
    I am implementing the budget process through user status as follows
    step1 User has to do the Cost planning first, So that time system does not allow to do direct budget allocation through cj30 and stop all the process like Release,PR,PO,GRN FI posting.
    Step 2 approval of cost planning by HOD from this process only system allow the budget allocation.
    step 3 budget approval by GM, So afer the  approval of budget system should  allow PR process.
    Step 4 Budget Release by MD throuch CJ32 and set the user status budget released,After this status system system should allow all the process like Release,PO,GRN,MIRO,FI posting.
    I did all the required configration as per requirement for above process in WBS user status, But my problem is that if suppose MD set the user status Budget released without doing the budget release through cj32 then system allowing all the process because my AVAC is not activited.
    Please provide me the solution
    thanks
    abhijeet

    you need to check you budget profile your availability control should get checked against Release budget mostly for overall release ( A/c to your scenario ) . So when you does CJ32 and  give budget at that time AVAC  status will be on WBS and if you giving less budget in CJ32 system will not allow your approver ( MD ) to save transaction.
    Ind. 'Overall' Ind. 'Releases'       Avail. control against ...
             X                       X             Overall budget released
    Make setting shown as below in your budget profile with activation type 1 .
    With Regards
    Nitin P.

  • No communication with device control through AJA Io?

    So this is weird (to me). I'm trying to capture a few Beta tapes and can't seem to get the device control going. For whatever reason I'm getting the "No Communication" message in my Log and Capture window. Of course, I'm getting the image in the window, but I can't control the deck through Log and Capture.
    My settings seem right:
    -Deck in remote mode
    -FCP set to AJA Io device control
    -Capture settings at AJA Io Betacam to DV (I know this isn't a problem because I can see the image)
    -I have unplugged and reset each cable in each port on the deck, Io, and computer
    The only thing I can think about is that the last footage I captured was from my MiniDV camera, so I must have tweaked some kind of a setting that I don't know about. Any thoughts?
    Thanks,
    Stef

    Device control: AJA Io RS-422 NTSC
    The RS-422 cable is connected to both the deck and the AJA. The Firewire cable is connected to my 400 port and the AJA.
    There has to be some kind of a problem with my 400 port, because I just daisy chained the AJA (which only uses a 400 cable) through my Lacie drive, which is connected to the laptop through the 800 port.
    Is there an explanation for this? Hopefully besides, "Sounds like your 400 port chucks it, Stef. Time to go get a new one."
    Message was edited by: majormajor22

  • Can the business transaction be controlled using user status profile?

    Hi All
    there is a requirment that in a project there will be 3 stages of approval.
    Each stage of approval should allow specific business transaction.
    eg. When the project is apporved in 1st stage then only PR's and pln Oders can be raised.
    When 2nd stage is approved then PR's can be converted to PO.
    When 3rd stage is approved then and Production activity can take place.
    I would like know whether user staus profile can be used to control the business transactions? If yes how?
    If user status is not possible, can any one help me out?
    Regards
    Paimal

    Hi ,
    As per me this scenario can be handled without user status
    When the project is apporved in 1st stage then only PR's and pln Oders can be raised.
    If ur generating PR/ planned order thru MRP run it is only possible after WBS release.So give the WBS release authorisation to 1 st authority.
    When 2nd stage is approved then PR's can be converted to PO.
    Put release strategy to PR so that there can be check by autourised person.
    When 3rd stage is approved then and Production activity can take place.
    Give production order Release authorization to person who is responsible for production planning.
    It is not suggestable to look at this scenario for applying  user status.
    Rgds

  • Controlling through User Status

    Dear SAP Gurus,
    I have the following scenario:-
    Status Profile:PROFILE01
    1. User status - CRTD
    2. User status - REL......................Both with the same Lowest and Highest Number and with same priority and Position
    The status pofile is assigned to M2 Notification type.
    Now please let me know with these customization already done, how to go about the following:-
    1. US - CRTD - is to be active till the Corresponding Mnt.Order is CRTD But not Released
    2 US-REL- to be active once the Mnt.ORder is Released.
    Please help me out. Thank you very much in advance

    hi
    while creating the user status ,just doble click on the line which will lead to another screen where you can allow or forbid or set the business transaction .
    Assign this user status to the object type notification
    make the user status CRTD as Initial and for US REL maintain the set indicator for the required business transaction
    regards
    thyagarajan

  • When connected to my Ford Mondeo, my ipod nano can be controlled through interface.  But after while it comes up with message 'loading data' and then freezes.  Anyone else got the issue?

    When connected to my new Ford Mondeo, my ipod nano can be controlled through user interface in car.  This worksd most of the time, but after a while if I try to change the music or search, it comes up with message 'Loading Data'.  I then have to pull out USB and reinseert, at which point it works again.  Has anyone esle expereinced this/have a solution?

    Does not matter if anyone else has this issue.  You need to contact the Ford dealership.  It's their product you are having problems with. 
    If you really want to know if anyone else has this issue, post on Ford's Mondeo message boards.  It's where the Ford car owners hang out.

  • Parallel How many times user can login to the SAP system through ITS

    Hello all
    We are using the ITS ---620 and following 46D R/3 system 
    R/3 system details:
    Kernal :
    kernel release :46D
    O/S :SunOS 5.8 Generic_108528-05 sun4us
    We would like to now, At a time How many times user can login to the SAP system through ITS
    Kindly letus know  if any one have idea about parameter which can restrict the end users to u201CNu201D times/ sessions.
    Transaction SITSPMON/SMICM are not working in R/3 system as it is 46D.
    We found that parameter u201Clogin/disable_multi_gui_loginu201D works with SAPgui logons.
    System logons using the Internet Transaction Server (ITS) or Remote Function Call (RFC) are not affected by this Parameter u201Clogin/disable_multi_gui_loginu201D
    I need similar parameter u201Clogin/disable_multi_gui_loginu201D for the ITS users.
    Thanks

    I have searched all docs and notes.
    Everytime the answer is PArameter for multi_gui_logonis not applicable for SAP Gui for HTML ( Browser )
    The functionality does not exist for SAP Gui for HTML.
    Regards,

  • I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

    I have installed Itunes on my laptop. However, the apple store opens in German language. I need it in English. How can i change the language for istore through the itunes?

    Go to the bottom of the page, click the flag, then select your country.

  • How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

    How can I get the attributes details like user name, mail , from sAMAccount csv or notepad file through powershell or any other command in AD?

    Ok what about If i need to get all important attributes by comparing Email addresses from excel file and get all required answers
    currently I am trying to verify how many users Lines are missing , Emp numbers , Phones  from AD with HR list available to me.
    I am trying to Scan all the AD matching HR Excel sheet and want to search quickly how many accounts are active , Line Managers names , Phone numbers , locations , title , AD ID .
    these are fields I am interested to get in output file after scanning Excel file and geting reply from AD in another Excel or CSV file
    Name’tAccountName’tDescri ption’tEma I IAddress’tLastLogonoate’tManager’tTitle’tDepartmenttComp
    any’twhenCreatedtAcctEnabled’tGroups
    Name,SamAccountName,Description,EmailAddress,LastLogonDate,Manager,Title,Department,Company,whenCreated,Enabled,MemberOf | Sort-Object -Property Name
    Can you modify this script to help me out :)
    Hi,
    Depending on what attributes you want.
    Import-Module ActiveDirectory
    #From a txt file
    $USERS = Get-Content C:\Temp\USER-LIST.txt
    $USERS|Foreach{Get-ADUser $_ -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
    #or from a csv file
    $USERS = Import-CSV C:\Temp\USER-LIST.csv
    $USERS|Foreach{Get-ADUser $_.SAMAccountName -Properties * |Select SAMAccountName, mail, XXXXX}|Export-CSV -Path C:\Temp\USERS-ATTRIBUTES.csv
    Regards,
    Dear
    Gautam Ji<abbr class="affil"></abbr>
    Thanks for replying I tried both but it did not work for me instead this command which i extended generated nice results
    Get-ADUser -Filter * -Property * | Select-Object Name,Created,createTimeStamp,DistinguishedName,DisplayName,
    EmployeeID,EmployeeNumber,Enabled,HomeDirectory,LastBadPasswordAttempt,LastLogonDate,LogonWorkstations,City,Manager,MemberOf,MobilePhone,PasswordLastSet,BadLogonCount,pwdLastSet,SamAccountName,UserPrincipalName,whenCreated,whenChanged
    | Export-CSV Allusers.csv -NoTypeInformation -Encoding UTF8
    only one problem is that Manager column is generating this outcome rather showing exact name of the line Manager .
    CN=Mr XYZ ,OU=Users,OU=IT,OU=Departments,OU=Company ,DC=organization,DC=com,DC=tk

  • Safari can't establish secure connection in parental controls managed user account

    Hi,
    Safari can't establish any secure connection in parental controls managed user account. Normal web sites open OK, but secure connections, like Gmail which requires https doesn't work. This is what I get instead:
    Safari can’t open the page “https://www.google.com/accounts/ServiceLogin?service=mail&passive=true&rm=false& continue=http%3A%2F%2Fmail.google.com%2Fmail%2F%3Fui%3Dhtml%26zy%3Dl&bsv=llya694 le36z&scc=1&ltmpl=default&ltmplcache=2&from=login” because Safari can’t establish a secure connection to the server “www.google.com”.
    Any ideas how to overcome this?

    Do you have anti virus software installed, or Peer Guardian?
    "https note: For websites that use SSL encryption (the URL will usually begin with https), the Internet content filter is unable to examine the encrypted content of the page. For this reason, encrypted websites must be explicitly allowed using the Always Allow list. Encrypted websites that are not on the Always Allow list will be blocked by the automatic Internet content filter."
    From here:  
    Mac OS X v10.5, 10.6: About the Parental Controls Internet content filter

  • HT201335 I can't find the AirPlay menu through control centre on iPad mini.  I don't have Apple TV. Means I can't stream some content (Netflix is useless now)

    I can't find the AirPlay menu through control centre on iPad mini.  I don't have Apple TV. Means I can't stream some content (Netflix is uselessnow)Everything worked Ok but today an error message said I couln't stream video to TV. Fix suggested is turn off mirroring in AirPlay when there is NO MENU for Airplay in iPad mini or iPhone. All support advice keeps on about Apple Tv. I'm NOT USING Apple TV

    http://support.apple.com/kb/ht5209
    http://support.apple.com/kb/ht4437
    http://support.apple.com/kb/TS4215
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-Airplay-Icon-Missing. htm
     Cheers, Tom

  • Can I set up a community limited to certain iPAD users on this discussion site?

    Can I set up a community ---limited to certain iPAD users ---on this discussion site?

    No. Users cannot set up private forums here. If you need a private area, you'll need to find some other web site to host it.
    Regards.

  • I can't play my iPod shuffle through my cars' communication system. Is it compatible?

    I Can't play my iPod shuffle through my car's communication system. Is it compatible?

    Why can no one answer this question correctly? I'm
    on hour number four of trying to get mine to play a
    song....skips through the titles the same way. I
    have searched the discussions and it looks like it's
    been asked several hundreds of times with no help
    given.
    Welcome to Apple Discussions!
    Actually, help has been given many times.
    Jeff even posted some help in this very thread. (The 5 Rs)
    Try those and this...
    Troubleshooting Songs That Skip On iPod
    Also, you would get help faster and in a more efficient matter if you created your own topic.
    btabz

  • Can't see photos of iPhoto through my Apple TV after moving the iPhoto library to my Airport Extreme Disk. It keeps "loading user's library" forever...

    Hi there,
    some days ago I purchased an Airport Extreme router with disk to move my iphoto library there and free space of my crowded macbook pro.
    Everything was working well (iphoto takes a little bit longer to start and quit) but now I can't see my photo library through my apple tv.
    It keeps loading the library forever.
    Is there any problem doing that?
    Thanks
    jm

    Help,
    Thanks for the quick answer and for the welcome.
    Yes I selected it in the iTunes sharing options (in fact several times, with resets in between just in case)
    I think that it's related to the size of the library (more than 8 gb) and e fact that is in a remote disk (in the AirPort Extreme)
    Hope anyone has the solution :-))
    Thanks again!
    Jm

  • Controlling the default language for new business users

    Hi everyone,
    If this has been answered elsewhere, my apologies for asking again.
    My company is currently in the initial implementation of ByDesign (1405). I just migrated our employees into ByD using the migration tool. This went fine, and also created (inactive) Business Users for each employee.
    One small issue I have, is that for each Business User created, ByD picked a "Default Language" based on the country where the user's organization unit is based (so Dutch for users assigned to an entity in the Netherlands, Danish for users assigned to a unit in Denmark, etc...).
    This despite the fact that the only language we have configured in ByD during scoping is English. In fact, when you edit the default language on the business user record, the drop down only offers English as a choice.
    Since this is our test environment, this is not a big deal, but I would like to prevent this once I migrate user to our production environment.
    So: how do I make sure that the Default Language on each Business User created when creating an Employee is English? (I would rather not have to fix this manually for a large number of users).
    Thanks!
    Eelco

    It applies to selected text. It is part of the text's style.
    So if you want a document to be by default a particular language, make a template in which all the text and all the styles in the styles drawer are set to what you want.
    Peter

Maybe you are looking for