Can portal server customize theme?

Is it possible for portal server to let end users to customize theme besides changing the layout, content, etc (the portal server default features)? If possible, how to implement it? Anyone have any idea?

We don't ship a theme provider which you can use to change themes, however having said that you can write your own theme provider to change background. There was an unsupported theme provider written, you might wanna contact your local sales contact or tech support to see if you can get your hands on it and see if that provides what your looking for ..

Similar Messages

Missing Images and CSS when going to portal/server.pt can't login

Hi,
I installed WebCenterInteraction_10.3.0.0.0 on Windows and followed all the steps mentioned in the install doc. Deployed the portal.ear and here is what I see on the command line after deployment:
Task #1 (InitPortalObjects) END (OK)
Task #2 (CheckDevKit) END (OK)
Task #3 (InitializePaths) END (OK)
Task #4 (InitializeApplication) END (OK)
Task #5 (InitializeAppWarmUpHelper) END (OK)
Task #6 (InitializeImageServerHelper) END (OK)
Task #7 (InitializeConfigHelper) END (OK)
Task #8 (InitializeResourceManager) END (OK)
Task #9 (LoadVersionHelper) END (OK)
Task #10 (InitializeActivitySpaces) END (OK)
Task #11 (InitializeVarPacks) END (OK)
Task #12 (InitializeImageServerHelperPartII) END (OK)
Task #13 (InitializeObjects) END (OK)
Task #14 (LoadCustomLoads) END (OK)
Task #15 (CheckDBVersion) END (OK)
Aqualogic Interaction startup successful.
    ======= Diagnostic Run Complete =======
    Startup completion percentage: 100% (50 steps out of 50 complete)
    ===== Portal should now start successfully ===== But when I go to http://localhost:7001/portal/server.pt I don't see any images and the css is not applied so can't login. Any idea what might be wrong. Here is the Apache httpd.conf
Include "C:/bea/alui/plumtreeconf/"
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.0/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
#     whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
#     which responds to requests that aren't handled by a virtual host.
#     These directives also provide default values for the settings
#     of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
#     different IP addresses or hostnames and have them handled by the
#     same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "C:/Program Files/Apache Group/Apache2" will be interpreted by the
# server as "C:/Program Files/Apache Group/Apache2/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# NOTE! If you intend to place this on an NFS (or otherwise network)
# mounted filesystem then please read the LockFile documentation (available
# at <URL:http://httpd.apache.org/docs/2.0/mod/mpm_common.html#lockfile>);
# you will save yourself a lot of trouble.
# Do NOT add a slash at the end of the directory path.
ServerRoot "C:/Program Files/Apache Group/Apache2"
# ScoreBoardFile: File used to store internal server process information.
# If unspecified (the default), the scoreboard will be stored in an
# anonymous shared memory segment, and will be unavailable to third-party
# applications.
# If specified, ensure that no two invocations of Apache share the same
# scoreboard file. The scoreboard file MUST BE STORED ON A LOCAL DISK.
#ScoreBoardFile logs/apache_runtime_status
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
## Server-Pool Size Regulation (MPM specific)
# WinNT MPM
# ThreadsPerChild: constant number of worker threads in the server process
# MaxRequestsPerChild: maximum number of requests a server process serves
<IfModule mpm_winnt.c>
ThreadsPerChild 250
MaxRequestsPerChild 0
</IfModule>
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses (0.0.0.0)
#Listen 12.34.56.78:80
# Listen 80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule access_module modules/mod_access.so
LoadModule actions_module modules/mod_actions.so
LoadModule alias_module modules/mod_alias.so
LoadModule asis_module modules/mod_asis.so
LoadModule auth_module modules/mod_auth.so
#LoadModule auth_anon_module modules/mod_auth_anon.so
#LoadModule auth_dbm_module modules/mod_auth_dbm.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_module modules/mod_dav.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
LoadModule dir_module modules/mod_dir.so
LoadModule env_module modules/mod_env.so
#LoadModule expires_module modules/mod_expires.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule headers_module modules/mod_headers.so
LoadModule imap_module modules/mod_imap.so
LoadModule include_module modules/mod_include.so
#LoadModule info_module modules/mod_info.so
LoadModule isapi_module modules/mod_isapi.so
LoadModule log_config_module modules/mod_log_config.so
LoadModule mime_module modules/mod_mime.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule proxy_module modules/mod_proxy.so
#LoadModule proxy_connect_module modules/mod_proxy_connect.so
#LoadModule proxy_http_module modules/mod_proxy_http.so
#LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule negotiation_module modules/mod_negotiation.so
#LoadModule rewrite_module modules/mod_rewrite.so
LoadModule setenvif_module modules/mod_setenvif.so
#LoadModule speling_module modules/mod_speling.so
#LoadModule status_module modules/mod_status.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule userdir_module modules/mod_userdir.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
#LoadModule ssl_module modules/mod_ssl.so
LoadModule weblogic_module modules/mod_wl_20.so
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
#ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If this is not set to valid DNS name for your host, server-generated
# redirections will not work. See also the UseCanonicalName directive.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address anyway, and this will make
# redirections work in a sensible way.
ServerName localhost:80
# UseCanonicalName: Determines how Apache constructs self-referencing
# URLs and the SERVER_NAME and SERVER_PORT variables.
# When set "Off", Apache will use the Hostname and Port supplied
# by the client. When set "On", Apache will use the value of the
# ServerName directive.
UseCanonicalName Off
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "C:/Program Files/Apache Group/Apache2/htdocs"
# Each directory to which Apache has access can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# features.
<Directory />
    Options FollowSymLinks
    AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "C:/Program Files/Apache Group/Apache2/htdocs">
# Possible values for the Options directive are "None", "All",
# or any combination of:
#   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#options
# for more information.
    Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
#   Options FileInfo AuthConfig Limit
    AllowOverride None
# Controls who can get stuff from this server.
    Order allow,deny
    Allow from all
</Directory>
# UserDir: The name of the directory that is appended onto a user's home
# directory if a ~user request is received. Be especially careful to use
# proper, forward slashes here. On Windows NT, "Personal/My Website"
# is a more appropriate choice.
UserDir "My Documents/My Website"
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
# You must correct the path for the root to match your system's configured
# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website"
# or whichever, as appropriate.
#<Directory "C:/Documents and Settings/*/My Documents/My Website">
#    AllowOverride FileInfo AuthConfig Limit
#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
#    <Limit GET POST OPTIONS PROPFIND>
#        Order allow,deny
#        Allow from all
#    </Limit>
#    <LimitExcept GET POST OPTIONS PROPFIND>
#        Order deny,allow
#        Deny from all
#    </LimitExcept>
#</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
# The index.html.var file (a type-map) is used to deliver content-
# negotiated documents. The MultiViews Option can be used for the
# same purpose, but it is much slower.
DirectoryIndex index.html index.html.var
# AccessFileName: The name of the file to look for in each directory
# for additional configuration directives. See also the AllowOverride
# directive.
AccessFileName .htaccess
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<FilesMatch "^\.ht">
    Order allow,deny
    Deny from all
</FilesMatch>
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
TypesConfig conf/mime.types
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
<IfModule mod_mime_magic.c>
    MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# EnableMMAP: Control whether memory-mapping is used to deliver
# files (assuming that the underlying OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. On some systems, turning it off (regardless of
# filesystem) can improve performance; for details, please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablemmap
#EnableMMAP off
# EnableSendfile: Control whether the sendfile kernel support is
# used to deliver files (assuming that the OS supports it).
# The default is on; turn this off if you serve from NFS-mounted
# filesystems. Please see
# http://httpd.apache.org/docs/2.0/mod/core.html#enablesendfile
#EnableSendfile off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog logs/error.log
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# You need to enable mod_logio.c to use %I and %O
#LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog logs/access.log common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# ServerTokens
# This directive configures what you return as the Server HTTP response
# Header. The default is 'Full' which sends information about the OS-Type
# and compiled in modules.
# Set to one of: Full | OS | Minor | Minimal | Major | Prod
# where Full conveys the most information, and Prod the least.
ServerTokens Full
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (internal error documents, FTP directory
# listings, mod_status and mod_info output etc., but not CGI generated
# documents or custom error documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/". If the fakename is slash-terminated, then the
# realname must also be slash terminated, and if the fakename omits the
# trailing slash, the realname must also omit it.
# We include the /icons/ alias for FancyIndexed directory listings. If you
# do not use FancyIndexing, you may comment this out.
Alias /icons/ "C:/Program Files/Apache Group/Apache2/icons/"
<Directory "C:/Program Files/Apache Group/Apache2/icons">
    Options Indexes MultiViews
    AllowOverride None
    Order allow,deny
    Allow from all
</Directory>
# This should be changed to the ServerRoot/manual/. The alias provides
# the manual, even if you choose to move your DocumentRoot. You may comment
# this out if you do not care for the documentation.
AliasMatch ^/manual(?:/(?:de|en|es|fr|ja|ko|ru))?(/.*)?$ "C:/Program Files/Apache Group/Apache2/manual$1"
<Directory "C:/Program Files/Apache Group/Apache2/manual">
    Options Indexes
    AllowOverride None
    Order allow,deny
    Allow from all
    <Files *.html>
        SetHandler type-map
    </Files>
    SetEnvIf Request_URI ^/manual/(de|en|es|fr|ja|ko|ru)/ prefer-language=$1
    RedirectMatch 301 ^/manual(?:/(de|en|es|fr|ja|ko|ru)){2,}(/.*)?$ /manual/$1$2
</Directory>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "C:/Program Files/Apache Group/Apache2/cgi-bin/"
# "C:/Program Files/Apache Group/Apache2/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "C:/Program Files/Apache Group/Apache2/cgi-bin">
    AllowOverride None
    Options None
    Order allow,deny
    Allow from all
</Directory>
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Directives controlling the display of server-generated directory listings.
# IndexOptions: Controls the appearance of server-generated directory
# listings.
IndexOptions FancyIndexing VersionSort
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
ReadmeName README.html
HeaderName HEADER.html
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
# DefaultLanguage and AddLanguage allows you to specify the language of
# a document. You can then use content negotiation to give a browser a
# file in a language the user can understand.
# Specify a default language. This means that all data
# going out without a specific language tag (see below) will
# be marked with this one. You probably do NOT want to set
# this unless you are sure it is correct for all cases.
# * It is generally better to not mark a page as
# * being a certain language than marking it with the wrong
# * language!
# DefaultLanguage nl
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in some cases
# the two character 'Language' abbreviation is not identical to
# the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. There is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Catalan (ca) - Croatian (hr) - Czech (cs) - Danish (da) - Dutch (nl)
# English (en) - Esperanto (eo) - Estonian (et) - French (fr) - German (de)
# Greek-Modern (el) - Hebrew (he) - Italian (it) - Japanese (ja)
# Korean (ko) - Luxembourgeois* (ltz) - Norwegian Nynorsk (nn)
# Norwegian (no) - Polish (pl) - Portugese (pt)
# Brazilian Portuguese (pt-BR) - Russian (ru) - Swedish (sv)
# Simplified Chinese (zh-CN) - Spanish (es) - Traditional Chinese (zh-TW)
AddLanguage ca .ca
AddLanguage cs .cz .cs
AddLanguage da .dk
AddLanguage de .de
AddLanguage el .el
AddLanguage en .en
AddLanguage eo .eo
AddLanguage es .es
AddLanguage et .et
AddLanguage fr .fr
AddLanguage he .he
AddLanguage hr .hr
AddLanguage it .it
AddLanguage ja .ja
AddLanguage ko .ko
AddLanguage ltz .ltz
AddLanguage nl .nl
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddLanguage pt .pt
AddLanguage pt-BR .pt-br
AddLanguage ru .ru
AddLanguage sv .sv
AddLanguage zh-CN .zh-cn
AddLanguage zh-TW .zh-tw
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW
# ForceLanguagePriority allows you to serve a result page rather than
# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback)
# [in case no accepted languages matched the available variants]
ForceLanguagePriority Prefer Fallback
# Commonly used filename extensions to character sets. You probably
# want to avoid clashes with the language extensions, unless you
# are good at carefully testing your setup after each change.
# See http://www.iana.org/assignments/character-sets for the
# official list of        .utf7
AddCharset utf-8       .utf8
AddCharset big5        .big5 .b5
AddCharset EUC-TW      .euc-tw
AddCharset EUC-JP      .euc-jp
AddCharset EUC-KR      .euc-kr
AddCharset shift_jis   .sjis
# AddType allows you to add to or override the MIME configuration
# file mime.types for specific file types.
#AddType application/x-tar .tgz
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For files that include their own HTTP headers:
#AddHandler send-as-is asis
# For server-parsed imagemap files:
#AddHandler imap-file map
# For type maps (negotiated resources):
# (This is enabled by default to allow the Apache "It Worked" page
# to be distributed in multiple languages.)
AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external

I am not expert in these, but please check out the following things and see whether it would solve your issue. (All these changes can be easily rolled back in case I'm wrong :). So make note of what you do)
As per your httpd.conf, you have chosen an automatic configuration of Apache by OWCI installer itself. What it does is create an imageserver.conf file in a separate directory and these settings will be included in your httpd.conf as you can see in the first line: Include "C:/bea/alui/plumtreeconf/".
If you check the imageserver.conf in that location, you would find a line like: Alias /imageserver/ "C:/bea/alui/ptimages/imageserver/". This aliases the original path "C:/bea/alui/ptimages/imageserver/" to /imageserver"
To confirm whether this is done right, check the following:
1. Acces 'http://<server ip / server name / localhost >/' from your browser
This should display the Apache home page (as per your httpd.conf, it uses the default port 80; so no port number required)
2. Access 'http://<server ip>/imageserver/' from your browser
This should display the directory structure (if its not disabled) inside your 'C:/bea/alui/ptimages/imageserver/' folder. Also confirm that all the subfolders are accessible.
3. If all the above is right, it means that your imageserver settings are right. Please check your portalconfig.xml for the correct settings: For example, <setting name="HTTPPort"> should be 7001 in your case. If its something else, change it and restart Weblogic for the settings to take effect.
Hope this helps.

Where can I find a portal server for JAVA development?

Hi, everyone:
I am looking a portal server which can be used under Windows envorinment and related development environment (toolkit or SDK).
I have done some search through IBM and SUN's web site and I can not find any portal servers that running on Windows plarform for download and related Windows development (toolkit or SDK).
Where can I find some trial versions of portal servers running under Windows and related Windows development (toolkit or SDK)? I want to use JAVA to development portal, so Microsoft does not provide any useful information.
I just want to use basic functions of portal servers so I think other portal servers other than IBM and SUN's can also be used, maybe an open source one can be used. But I do not know what are they and where can I get them. :-)
So, anyone can help me to introduce a portal server that can meet my needs. Or provide me information where to download IBM or SUN's portal server running under Windows and related Windows development (toolkit or SDK).
Best regards,
George

I just want to use portal server and deploy some
applications written in JAVA. Have I made myself
understood?
Still not clear.
Do you want a server application that deploys software. For example you create a game. Someone logs into your "portal server" and downloads the game from that?
Or do you just want to know how to package a java app that you have already written, and then put it on a CD so someone can install that on their computer?

How we can reduce the star-up time of weblogic portal server

weblogic portal server takes 8-10 minutes to start on portal server
can anybody suggest any remedy by which I can cring down this startup time bye 3-4 minutes.
Thanks
Ashish

The reason portal server takes so much time is because in the background its starting many services and waiting for them to start completely.
The services are - Autonomy search engine, which has 4-5 compoments, if you are using pointbase then it will start pointbase DB.
To reduce the startup time you can disable autonomy, similarly you can use oracle or some other DB.
Server opens connections at startup according to whats defined in JDBC connection pool configuration, you can tune this too.

UWL item to use portal customize theme.

Dear all,
I have a customize abap web dynpro application that will launch in the UWL. (second level leave request). How can i force it to use our portal customize theme.
Can i include some code in the UWL and below are my XML code.
    <ItemType name="uwl.task.webflow.TS90200060.SAP_ECC_HumanResources" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
      <ItemTypeCriteria systemId="SAP_ECC_HumanResources" externalType="TS90200060" connector="WebFlowConnector"/>
      <Actions>
        <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproABAPLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
          <Properties>
            <Property name="WebDynproApplication" value="ZMSSLEAVE_APPROVAL"/>
            <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
            <Property name="DynamicParameter" value="WI_ID=${item.externalId}"/>
            <Property name="openInNewWindow" value="yes"/>
            <Property name="System" value="ECDCLNT110b"/>
            <Property name="WebDynproNamespace" value="SAP"/>
            <Property name="display_order_priority" value="5"/>
          </Properties>
          <Descriptions default=""/>
        </Action>
      </Actions>
    </ItemType>
Thanks
Regards,
Bryan

Hello,
I see your thread is still unanswered, were you able to resolve the problem yourself (if so can you share with others who may have the same problem)? If so can you add anymore details which may help someone else to find an answer? Or is it ok to mark this post as assumed answered?
Beth Maben
EP - Senior Support Consultant II
SAP Active Global Support
Global Support Centre Ireland
**SDN Forum Moderator:
SAP Enterprise Portal: Application Integration
**SDN Universal Worklist Wiki:
http://wiki.sdn.sap.com/wiki/x/ehU

Is it possible for a channel present in one portal server can be shared across another portal server?

Say there are two portal servers A and B.
Sample Channel is present in A iPlanet portal server which I want it to be in another
B iPlanet portal server.If it is possible then how to configure?

That really depends on the type of channel and what you want to share.. If it is a URL scraper or JSP channel, you should be able to define on one server and then export the definition using <b>ipsadmin</b>. This will bring it to an XML file which can then be imported on Server B using <b>ipsadmin</b>.

Why portal server can't create an instance of axis.Service class?

Hi,gurus,
We developed a uwl custom connector,The time out occured in that custom connector.After adding the time out value from 30s to 300s,the problem still existed.
The code is like below:
String endpoint = "http://172.16.127.4:8080/appframe-web/services/WorkItemService";
Service service = new Service(); // time out code
Call call = (Call) service.createCall();
call.setTargetEndpointAddress(endpoint);
call.setOperationName("wisForPortal");
call.addParameter("userCode", org.apache.axis.encoding.XMLType.XSD_STRING, javax.xml.rpc.ParameterMode.IN);/
call.setReturnType(org.apache.axis.encoding.XMLType.XSD_STRING);
String temp = "36";
Object result = call.invoke(new Object[]{temp});
The time out occured when the portal server create an instance of Service class.Does that mean the server can't find the jars?
But the object declaration like "Service service=null;" is all right.
Any ideas?Thanks in advance.

I have a project called 'Default EAR' in my workspace.
But I can't add the JAR to the that project. These instructions are for WSAD 4, but I assume WSAD 5 is similar:
Go to menu File and select Import. Choose "File System" to import from. Specify "Default EAR" as your folder and select the jar file from the directory/browse prompt.
This is assuming your web app is connected to Default EAR and not some other EAR file. Also once you've done this, you will find that the jar file automatically becomes part of your build path. You didn't have to do anything extra to make that happen.

Can't access Portal Server

Hi,
After installation of JSE(Windows Version),
I can access the identity admin console with url
http://host:port/amconsole
But I can't use the url
http://host:port/portal or
http://host:port/portal/dt
to access Portal Server Desktop, the browser
receive an 500 Internal Error Message.
The summary report after installation is
Installation Summary Report
Install Summary
Sun Java System Message Queue 3.0.1 Service Pack 2 : Installed, Configured
Sun Java System Application Server 7 Update 1 : Installed, Configured
Sun Java Studio Enterprise 6 2004Q1 : Installed, Configured
Sun Java System Web Server 6.1 Service Pack 1 : Installed, Configured
Sun Java System Directory Server 5.2 : Installed, Configured
Sun Java System Identity Server 6.1 : Installed, Configured
Sun Java System Portal Server 6.2 : Installed, Configured
PolicyAgent: Installed, Configured
It seems nothing wrong, and how can I solve
this problem?
Many thanks,

So, you got Java SE installed. Great. (I've been following your other thread re: installing IS and PS properly).It's not exactly right. I try to use Windows 2000 to install JES and with the same DNS configuration.
It works. But I still can't install IS/PS correctly in the original machine(Win XP).
Check the troubleshooting info in the Java SE Install Guide, I believethis error is covered in there. Be sure you use a new instance of your browser to access the PS desktop. And, be sure to check the supported browser list in the Release Notes.
I go through the overall Install Guide, it's really that I can't find and answer to solve my problem :'(
Regards,

Why do we need a portal server, why can't an application server do the same job?

what is the need of a portal server?
why can't the same work be done by an application server alone?
what is are the features of portal server which make it more attractive rather than an application server?

What Portal provides is
authentication
authorization,
user management,
security ( SRAP),
content presentation frame work ( URL Scraper provider, RSS provider and JSP provider )
dynamic vpn ( through netlets you can integrate any tcp based network application )
Wireless portal :-),
and a variety of other features ..
I don't believe app server provides all these features. Requirements of these features necessitates a portal market which the portal server addresses.

I want to write a java program that can add a user to a role or sub role to the Profile Database in iPlanet Portal Server 3.0. Does anyone has any idea or a sample program do such thing. Thanks, Tommy

I want to write a java program that can add a user to a role or sub role to the Profile Database in iPlanet Portal Server 3.0. Does anyone has any idea or a sample program do such thing? Thanks, Tommy

// create the user profile, get the handle back,
// and set the membership profile attributes.
ProfileAdmin newProfile = null;
try {
// the users profile name is the domain
// he belongs to plus their userName
// you will request.domain if your doing this from a servlet, domain_name is the domain_name the user belongs too
String profileName = domain_name + "/" + user;
     if (debug.messageEnabled()) {
debug.message("creating profile for " + profileName);
// create the user profile object
newProfile = ProfileManager.createProfile(
getSession(), profileName ,Profile.USER);
UserProfile userProfile = (UserProfile)newProfile;
     // set the role the user is a member of. Default is to set
     // the users to the default role of the domain they surfed to
     StringBuffer roleName = new StringBuffer(64);
// request.domain instead of domain_name if your doing this from a servlet ..
Profile dp = getDomainProfile(domain_name);
roleName.append(dp.getAttributeString("iwtAuth-defaultRole"));
     if (debug.messageEnabled()) {
debug.message("setting role for " + user + " = " + roleName);
userProfile.setRole(roleName.toString());
newProfile.store(false);
} catch (ProfileException pe) {
     debug.error("profile exception occured: ",pe);
return;
} catch (ProfileException pe) {
     debug.error("login exception occured: ",le);
return;
HTH ..

Failed configuring Portal Server. can't run cacaoadm.bat

Hi,
I am trying to install Sun Java ES5 (2006Q4) on window XP. The configuration for portal server was failed. When I checked the logs, it complains cacao default instance was disabled and couldn't started. I went to the the directory and tried to manually run cacaoadm command. It returns:
C:\Sun\JavaES5\share\cacao_2\bin>cacaoadm.bat enable
This action cannot be performed by a non privileged user.
I logged on to the windows as a user who is in the administrators group. Any other components installations were fine. I really have no idea how to solve this problem as there is no user account as administrator. Can someone please help?
The portal config error from the log are as following:
[#|2007-06-26T15:22:14.821+1000|INFO|SJS Portal Server|debug.com.sun.portal.fabric.config|ThreadID=10; ClassName=com.sun.portal.fabric.config.PortalConfigurator; MethodName=configureHost; |PSFB_CSPFC0021:Waiting for Cacao Server to Startup|#]
[#|2007-06-26T15:22:15.696+1000|FINEST|SJS Portal Server|debug.com.sun.portal.fabric.util|ThreadID=37; ClassName=com.sun.portal.fabric.util.StreamLogger; MethodName=run; |PSFB_CSPFU0004: C:/Sun/JavaES5/share/cacao_2/bin/cacaoadm(Output)=default instance is DISABLED at system startup.|#]
[#|2007-06-26T15:22:15.712+1000|FINEST|SJS Portal Server|debug.com.sun.portal.fabric.util|ThreadID=37; ClassName=com.sun.portal.fabric.util.StreamLogger; MethodName=run; |PSFB_CSPFU0004: C:/Sun/JavaES5/share/cacao_2/bin/cacaoadm(Output)=default instance is not running.|#]
[#|2007-06-26T15:22:15.790+1000|INFO|SJS Portal Server|debug.com.sun.portal.fabric.tasks|ThreadID=10; ClassName=com.sun.portal.fabric.tasks.Cacao; MethodName=execCommand; |PSFB_CSPFT0342:<C:/Sun/JavaES5/share/cacao_2/bin/cacaoadm status> Returned <default instance is DISABLED at system startup.
default instance is not running.
|#][#|2007-06-26T15:23:45.790+1000|SEVERE|SJS Portal Server|debug.com.sun.portal.fabric.config|ThreadID=10; ClassName=com.sun.portal.fabric.config.PortalConfigurator; MethodName=configureHost; |PSFB_CSPFC0020:Cacao Server startup failed|#]
[#|2007-06-26T15:23:45.790+1000|SEVERE|SJS Portal Server|debug.com.sun.portal.fabric.config|ThreadID=10; ClassName=com.sun.portal.fabric.config.PortalConfigurator; MethodName=configureHost; |PSFB_CSPFC0024:Failed to configure the Host
com.sun.portal.fabric.tasks.ConfigurationException
     at com.sun.portal.fabric.config.PortalConfigurator.configureHost(PortalConfigurator.java:635)
     at com.sun.portal.fabric.config.ConfigurePortal.main(ConfigurePortal.java:166)
|#]
[#|2007-06-26T15:23:45.790+1000|SEVERE|SJS Portal Server|debug.com.sun.portal.fabric.config|ThreadID=10; ClassName=com.sun.portal.fabric.config.ConfigurePortal; MethodName=main; |PSFB_CSPFC0014:Failed configuring Portal Server!!
com.sun.portal.fabric.tasks.ConfigurationException: com.sun.portal.fabric.tasks.ConfigurationException
     at com.sun.portal.fabric.config.PortalConfigurator.configureHost(PortalConfigurator.java:749)
     at com.sun.portal.fabric.config.ConfigurePortal.main(ConfigurePortal.java:166)
Thank you very much
Regards,
Tara

Hi Deepak,
Thanks for the post.
Use cacaoadm restar gives me the same error.
I found out that is a limitation for the windows version I am using. Basically, the account for installation and configuration has to be an local administrator not in network.
Cheers,
Tara

Where can I download Java Portal Server 7 for Windows

Hi all,
I have seen in FAQ that there is a Java Portal Server 7 available for Windows since last December. But I am not able to find where I can download it.
In the download section, I have found only the portal server 6.1 for SPARK but nothing about v7 for Windows =(
May someone tell me how can I get this Portal Server 7 ?
Thanks a lot in advance.
Cheers

The PS7.1 beta Win software is downloadble from the following location:
# Beta software posted on SDLC: http://javashoplm.sun.com/ECom/docs/Welcome.jsp?StoreId=7&PartDetailId=JES5-HP-WIN-G-B&TransactionId=Try
You will need to login using your Sun Online account
You need to download either the full distriution -
Java Enterprise System 5: Windows 2000 SP4 (Full Product Distribution), English
or
Java Enterprise System 5: Windows 2000 SP4 (Availability Platform Suite Distribution), English
Actually App Platfrom Suite and not the typo 'Availablity Platfrom'.
Message was edited by:
rabic

Can i install the Portal Server 7 on Red Hat Enterprise Linux 4 ?

hi all,
Can i install Portal Server 7 on Red Hat Enterprise Linux 4 ?
Thnx in Advance.

Hi All,
After tearing my hair out for about 3 weeks I've figured following are the steps for installing Sun Portal Server 7 on RH Linux 4. These though help successful installation I am still struggling to get the Single Sign On for the sample applications working.
1. Boot linux with the network cable disconnected. (cable disconnected or wireless disabled is very important).
2. set Hostname to localhost.localdomain
3. Start INstaller (I always used the root login).
4. Once the components list comes up "select All" then unselect "Sun POrtal Server 7" and "Sun Java System Portal Secure Remote Access". (trust me firends I am not kidding around).
5. Follow steps of installation. Provide a password wherever requested. Highly suggested that you note down the options and the values you are entering in each step. Its about 20 page installer. Also whereever host and domain is asked for use localhost.localdomain. IP should be 127.0.0.1. Valid IP and valid domain name will also work but I haven't gone that route yet.
6. Take special note of the LDAP Admin Password and LDAP user password. Note the usernames too. The admin password and user passwords HAVE to be different. DO NOT Forget the admin password. Default admin name is amAdmin.
7. Go ahead and let the installation complete.
8. I always used localhost.localdomain as domain name and host name and IP to loopback address 127.0.0.1
Once the installation is complete start newly installed server in the following sequence
A. To start localhost slapd:
cd /var/opt/sun/directory-server/slapd-localhost/
./start-slapd
cd /var/opt/sun/directory-server/
./start-admin
(you can test here by running ./startconsole and loggin in using the admin username and password (you you should have remembered those... don't tell me I didn't warn you :)...)
B. To start Sun Java System Application Server
cd /opt/sun/appserver/bin
./asadmin start-domain --user [username] --passwordfile [a simple txt file with only the password in it] [domain name]
e.g.
./asadmin start-domain user admin passwordfile adminpassword.txt domain1 OR
./asadmin start-domain user admin password pass123 domain1
takes a few seconds to kick it off.
open browser and go to http://localhost.localdomain:8080/ to check if application server is running
C. To start Identity Server
cd /opt/sun/identity/bin
./amserver start
Now go to the SunPortal Server installer again and run it.
9. In the screen that asks whether you want to install only or configure select configure now.
10. Fill in required parameters like password. and user name. ( I kept ALL default and used the same password all throughout except for LDAP admin, I am doing this for a PoC so security be damned at the moment ).
11. Be sure to fill in the correct LDAP admin and user passwords because else installation will fail.
12. Let the installation roll
13. At about 38% it will give a popup warning configuration may take upto an hour. If you get to click on this popups ok button good things are progressing fine. If not some server didn't start right.
14. Takes about 15 minutes (depends on machine config) after you hit okay for the configuration to complete. Anything lesser check logs for any failure notices.
15. IF all success reported congratulations!!!
16. Goto http://localhost.localdomain:8080/portal/ to go to portal home page
IT STILL DOESN"T WORK!!! HELP!!!
Folks after all I said above it still doesn't work. When I go to any of the portal server Sample Applications and try to log in using the default usernames
Community Samples has test/test
Enterprise Sample has mary/mary ed/ed etc
I cannot log in... The screen simply refreshes but doesn't go anywhere.
I am suspecting this is because the domain and host is pointing to localhost.localdomain instead it should be given a valid domain name and a valid host and a valid IP instead of 127.0.0.1. If anyone can throw anymore light on this I'll be grateful.

I have deployed SSIS Package to Integration Services Server, Can i still call them in Parent Package

i have deployed SSIS Package to Integration Services Server, Can i still call them in Parent Package

Hello,
In SSIS 2008 you have to adjust your parent package in Visual Studio and point to the deployed package, as ArthurZ stated.
In SSIS 2012 with projects in project deployment mode this has become easier: you can call the child package in your project from the main package and it will use the package in the development. then you can deploy the project ot SSISDB and the
Main package in there will call the child packages in the SSISDB.
Jan D'Hondt - SQL server BI development

Can I install Portal server 6.1 with Directory server 5.2

Hi,
Can I install Sun ONE Portal Server 6.1 with Sun ONE Directory Server 5.2 that is an existing installation? I have checked iPS 6.1 installation guide that mentioned iDS version should be 5.1.
Thanks a lot,
Yu Mao

Identity server 6.0 SPx has not been certified/tested on DS 5.2.
IS 6.1 will support DS 5.2.

Can portal server customize theme?

Similar Messages

Maybe you are looking for