Can power outages affect the IPod 5 cable cord and how it charges my IPod?

I have an IPod 5, i ordered it off of Amazon. Recently we have had two lightning storms that have knocked out the power in my house. My Ipod was not plugged in, i dont believe, at the time but my Ipod cable charger was. After the storm my ipod stopped charging. I could only charge it in certain positions and after a couple of days my charger just wouldnt work. What is the cause of this? Do i need to replace my IPod or just get a new charger? I see nothing wrong in the IPod itself so im guessing its the charger? Also, i cant try out a different charger because i do not have another one. Thank you for answering!

Also, when i try to plug it into a computer it shows an error and says something along the lines of "Power supply has exceeded" ??

Similar Messages

  • I lost my ipod i bought i new one...i just wanna know if i can still recover all the songs i bought and downloaded from my lost ipod to the new one..if i can how will i do that since i downloaded everything and bought in my ipod not in my computer

    i lost my ipod and i just bought a new one...i just wanna know if i can still recover my downloads from my lost one to the new one since i bought and downloaded all the songs through my ipod and not through computer..if i can, how can i do that?

    Nope.
    Apple recomends after each purchase to BACKUP your purchases. If purchased on a mobile device (iPhone, iTouch, iPod, etc) you should transfer your purchases to a computer running iTunes as soon as possible to back them up.
    If you don't have your items in your library, I'm afraid there is little recourse.
    Hope you did not loose too much.

  • I believe my ipads hard drive corrupted when i went from my macbook to a pc...I can get to the screen with cord and itunes but cant get past there to desktop of ipad...Any help would be appreciated....

    I believe my ipads hard drive corrupted when i went from my macbook to a pc...I can get to the screen with cord and itunes but cant get past there to desktop of ipad...Any help would be appreciated....

    Try using this article to help with your iPad not showing up in iTunes---
    http://support.apple.com/kb/TS1538     -This deals with the device not being recognized in iTunes for Windows
    The following steps work well with iPod but i would try them for help with your iPad issue:
    Try connecting your iPad to another USB port directly on the computer. Verify that you're connecting it to a high-powered USB 2.0 port on your computer to be sure iPad is getting power. If you're connecting to a Windows laptop computer through USB, connect the laptop to a power outlet before connecting your iPad. Also, see iPod not recognized when connected to Windows laptop over USB to be sure that your USB ports are supplying enough power.
    Avoid connecting to an external USB hub. If a hub must be used, make sure the hub is USB 2.0, and that it has its own power supply. Also, make sure the hub is connected to a high-power USB 2.0 port on your computer.
    If the issue persists, try disconnecting other USB devices from the computer such as printers, cameras, scanners, external hard drives, and USB hubs to determine if there is a conflict in the USB chain.

  • Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

    Hi there, I pay for extra iCloud space online. However I cannot seem to find any of my photos or account? As my iPod/iPhone only hold 1000 pictures, where are the previous pictures? And how can I access them?

    You cannot use iCloud Storage to suppliment your iPad. They are mainly used to backup iPad.
    Free up space on iPad
    Settings>General>Usage>Storage>Delete what is not needed to free up space on iPad.

  • HT3546 So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou! :)

    So i recently bought an Apple AirPort Extreme BaseStation (the mushroom shaped one) and was wondering if someone could tell me where and how to find a power cord and how to set it up with my Macintosh (2011 edition with 1.7.5) Thankyou!

    Welcome!
    Last question first, as we need to know what operating system that the Mac is using.
    If you are not sure, click the Apple icon in the upper left corner of the screen, then click About This Mac, and post back with the OS X Version number that you see there.
    Two possible solutions on the power cord
    ORIGINAL OEM APPLE AIRPORT EXTREME BASE STATION POWER SUPPLY AC ADAPTER A1202 if you want a white power supply and white power cord to match up with the Apple device
    AC adapter for Apple AirPort A1034 Extreme B... if you don't care what color the supply and cord might be
    If you don't already have a Setup Guide.....look here:
    AirPort Extreme Base Station Setup Guide v4.2 (Manual)

  • My iPod is dead and won't charge or connect to the computer. How can I fix this?

    My iPod is dead and won't charge or connect to the computer. How can I fix this? Before it died, it said I had a full battery whenever I charged it, but as soon as it came off of the charger, the battery level was always under ten per cent.

    Sounds like the battery needs to be replaced.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

  • I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility?

    I just bought an AirPort express. Currently I have a qwest wired router plugged into the back of my computer via an ethernet cable. Can I just unplug the ethernet cable and plug it into the AirPort express, then use the setup utility? Most of the discussions involve an existing wireless network. I don't have one.

    Correct. That's the way to set up the AirPort Express. After connecting your AirPort Express to the router, open AirPort Utility (in /Applications/Utilities) and follow the steps

  • HT1369 why is my ipod can not connect with the i tunes store and can not sync

    Dear apple,
    Please kindly help me because my ipod can not connect with the i tunes store and can not sync either

    Follow through: iTunes for Windows: Device Connectivity Tests
    That link, also contains other links that may be related to your problem and/or to your solution.
    Hope this helps.

  • HT1384 Is there a difference between an IPod USB cord and an IPhone USB cord?

    Is there a difference between an IPod USB cord and an IPhone USB cord?

    Guy would this be of any help:
    To start up your computer in Apple Hardware Test:
    Press the power button to turn on your computer.
    Press and hold the D key before the gray startup screen appears. If Apple Hardware Test does not start up, see the Additional Information section at the end of this article.
    Note: Some Macintosh computers that shipped with OS X Lion support the use of Apple Hardware Test over the Internet. These computers will start up to an Internet-based version of AHT if the hard drive does not contain AHT.  An Internet-enabled connection via Ethernet or Wi-Fi is required to use this feature.
    It takes a minute or so for Apple Hardware Test to start up and inspect your hardware configuration. While this is taking place, an icon appears on the screen:
    When the process is complete, select your language and click the right arrow. If you aren't using a mouse, you can use the up and down arrows to select a language and then press the Return key.
    The Apple Hardware Test console appears. You can choose which sort of test or tests to perform:
    To perform all of the basic tests, click the Test button or press the "T" key or the Return key.
    To perform a more thorough diagnostic test, select the "Perform extended testing" checkbox under the Test button before you click the Test button.
    Your test results will appear in the window in the bottom-right of the console.
    To exit AHT, click Restart or Shut Down at the bottom of the window.

  • I have an ipod 5 (IOS8) and two days ago my ipod died and when I tried to on it after charging it would turn on to the apple symbol and after about 5 minutes it would shut off. Another problem is that i also have a jammed home button.

    I have an ipod 5 (IOS8) and two days ago my ipod died and when I tried to on it after charging it would turn on to the apple symbol and after about 5 minutes it would shut off. Another problem is that i also have a jammed home button. Is there anyway i can fix my ipod?

    Try:
    Turn on without Home/Power Button

  • Macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again

    macbook pro 15" mid 2010 i spilled water on keyboard now it wont power on if the battery is connected and the keys on keyboard doesnt work it works fine with no battery and external keyboard if i order a battery and new keyboard will every else work again lik it did before

    If you have records that show that you've taken your MacBook Pro in for a year to fix the machine, I would escalate the problem to Apple Customer Relations - unfortunately I don't have a number for Spain.
    It would only seem logical to me that if you've been trying to have the machine repaired during the time that the 'recall' was in effect that you should be eligible for a new logic board. But only customer relations will be able to make that call.
    Good luck - take the issue as high up the food chain as you can and see what happens.
    Clinton

  • I tried to update my ipod 4th gen. but when I came to see how much charge the screen was red and it wasnt charged and i cant use my ipod. the screen turned blue also one time, and now the apple logo comes up and its bright then dim and it stays there help

    I tried to update my iPod 4th generation while it was charging and when I came back to check on it the screen was red and it wouldnt go off, and my ipod wasnt charging like it was supposed to. I found out how to get the color of the screen off but my ipod always has the low battery thing and when I charge it sometimes the screen turns blue or the apple logo comes up bright and then it gets dim and stays there. My ipod wont turn on, and I really want it to work again. Help me please! Also, I noticed my ipod battery hasnt been lasting long as it should efore this happened.

    Try:
    - iOS: Not responding or does not turn on
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Which wire on the 30-pin plug is responsible for charging an Ipod?

    Which wire on the 30-pin plug is responsible for charging an Ipod? I want to cut this wire so that I can use my Ipod in my car or on my computer without having to charge it. I understand that Ipod's are meant to withstand short charges, but I still want to figure out how to do this. There has to be one wire (or more) that is specifically responsible for only charging the ipod. Does anyone know which one? See wiring diagram below:
    Pin - Signal
    1 - GND
    2 - GND
    3 - Right
    4 - Left
    5 - Right In
    6 - Left In
    7 - ?
    8 - Video Out
    9 - S-Video Chrominance output
    10 - S-Video Luminance output
    11 - AUDIO_SW
    12 - Tx
    13 - Rx
    14 - RSVD
    15 - GND
    16 - GND
    17 - RSVD
    18 - 3.3V
    19,20 - +12V
    21 - Accessory Indicator/Serial enable
    22 - TPA -
    23 - 5 VDC +
    24 - TPA +
    25 - Data -
    26 - TPB -
    27 - Data +
    28 - TPB +
    29,30 - GND

    PStimola wrote:
    I just cut wire #23. It does not charge it now but the ipod is not recognized either. Would adding a false drain on the 5 volts help? I don't know what else to do. Let me know.
    Yes.  Reconnect the wire and use the iPod the way that it was designed to be used.

  • Iphone 4 will not charge but when i hold power button it the batt comes on and the plug and the lighning bolt shows up

    iphone 4 will not charge but when i hold power button it the batt comes on and the plug and the lighning bolt shows up. i tried different chargers wall and computer and tried soft reset, the phone died on its own it was jailbroken. but with the batt sing and the plug with the lightning bolt tells me the batt is still vholding charge.

    Hello!
    i know a place where they can look at your phone. It's call DoctorApple. i went there to repair my phone. this is their phone number : 514 234-2851

  • Can UCE communicate to the Universal Knowledge Base and Universal Software

    Question
    Can UCE communicate to the Universal Knowledge Base and Universal Software Component Repository through a company proxy server?
    Answer
    During the install process of the OnStage Management Server, the OnStage EZ-installer will detect your local proxy server whilst establishing communications with the Aduva Universal Servers.
    In this instance, the user is prompted for the proxy parameters, including IP address of the proxy or proxy server name if DNS is present, proxy user name and password.
    This information is stored locally in the .director.rc file and is never communicated to Aduva or any other 3rd party.
    Once the proxy settings have been correctly inputed during installation, OnStage will indeed work through the proxy server.

    Welcome to Apple Discussions.
    I assume you have already tried what has been said in this: iPod shows up in Windows Explorer but not in iTunes, iPod Service Error or Please reinstall iTunes and Fast User Switching in Windows XP is not supported?
    Sorry if you have, but have to know first.

Maybe you are looking for

  • Problem in integration senario?

    hi experts, iam doing simlane diagram in integration senario in IR part  for this i have created two Actions.in integration senario when iam creating Actions between two  between sender and receiver iam not geting asynchronous action,iam geting synch

  • Graphical display of core activity?

    So.. I have a Dual Core i7 MBP.... (also a quad core i7 iMac) is there a way to graphically see how different processes are being run on the different cores? In other words... can I see how efficent my computer is? when running different programs (Fi

  • Create smart album with ONLY some faces

    Hi. I need some help here. I created a smart album and I want it to have photos where only my girlfriend and I appear. I put two conditions: Face-is-my_name, and Face-is-mygirlfriend'sname. The problem is that it creates the album but it also contain

  • Sending SMTP mail using Mailgun does not work from Azure, but works from on premise

    I am using Mailgun to send email from my web application. When I test the application from my development box, the e-mail is sent and received I see the logs in Mailgun site as well. However, when I publish the code to Azure and send the e-mail, it i

  • Ituns se cierra automaticamente, ituns se cierra automaticamente

    Al intentar la sincronizacion estafa ituns me Que marca el Programa Dejo de funcionar Y Que el Programa en sí cerrará. Ya QUE SEA Conecta mi ipod o iphone.