Can Powerbook connect to sony LCD flat panel fo simultaneous display?

I want to buy the Sony KDL-52XBR2 LCD flat panel and connect my Powerbook G4 using an HDMI or HD-15 Pin cable for simultaneous display.
While the TV specs say it will allow a PC to connect and display, I have had trouble in the past with Mac/tv connectivity because of video driver issues in either the Powerbook or the tv. I could not get both screens to display simultaneously (without parts being cut off at the bottom or sides). Apple would not support my question as the "connected device" (the tv) was not an apple product.
Before I spend the money on a new TV, I would like to know if anyone has had success with "plug-and-play" connectivity to a 42" or 50" plasma or LCD flat panel, in particular a Sony product.
Thanks in advance for sharing.

There is no reliable way to know if a random TV will or will not suffer from the "overscan" problem where the top, bottom and sides are cut off. Many TVs do this and there is no way to get around it.
What I would do is take your PowerBook to the retailer where you are buying the TV and ask them if you can hook up the PB to the floor model. That is the only way to know for sure if it works to your satisfaction. Either that or, if you have a specific TV and know its model number, you might be able to ask your question again and get an answer from someone that already owns the TV. The AVSforum.com are a good place to check for various TV models.

Similar Messages

  • Can Powerbook connect to Sony LCD flat panel properly for simul. display?

    I want to buy the Sony KDL-52XBR2 LCD flat panel and connect my Powerbook G4 using an HDMI or HD-15 Pin cable for simultaneous display.
    While the TV specs say it will allow a PC to connect and display, I have had trouble in the past with Mac/tv connectivity because of video driver issues in either the Powerbook or the tv. I could not get both screens to display simultaneously (without parts being cut off at the bottom or sides). Apple would not support my question as the "connected device" (the tv) was not an apple product.
    Before I spend the money on a new TV, I would like to know if anyone has had success with "plug-and-play" connectivity to a 42" or 50" plasma or LCD flat panel, in particular a Sony product.
    Thanks in advance for sharing.

    YOu should probalby post your question in the appropriate PowerBook "Displays" discussions:
    http://discussions.apple.com/category.jspa?categoryID=120

  • Connect MBA to LCD Flat Panel

    I've tried to connect my MBA to my LG 42" LCD Flat Panel by using the RGB connector. When doing this, the MBA screen changes its resolution, but i can't see nothing on the LCD. Do I need to install a driver?

    You are going to need to purchase an adapter from Apple to interface to the Mini DVI connector. Then get a cable like this from monoprice:
    http://tinyurl.com/ekpm2

  • Hooking up 17" LCD Flat Panel Apple Monitor to an older G4

    I have an older G4 and bought a 17" LCD Flat Panel Apple Monitor Studio Display to use with it. However, the plug from the monitor doesn't fit into any of the G4 connections. Am I crazy? I thought these monitors were created for the G4s. I tried the USB port, but nothing happened. Am I gonna have to get an adapter?
    Sorry to be so ignorant. Can anyone help?
    Thank you in advance.

    The Apple Studio Display 17 (LCD) \[Clear lucite with white] has an ADC connector. Displays with ADC connector require a computer that supplies the required 25 Volt power through the cable, or if you use a DVI to ADC converter (with its own AC power cord) you can use a display card with DVI connector.
    Which older G4 or what speed in MHz?
    The PCI graphics and AGP Graphics cannot supply the 25 Volts to power this display. Gigabit Ethernet and later have the Power supply and the fingers in the AGP slot to pass that power to an ADC-equipped card.

  • Can I connect 2 sony bravia's, a sony home theatre, 2 macbooks, 2 ipads, 3 iphones and a dell laptop and stream media from my apple devices to my tv?

    Can I connect 2 sony bravia's, a sony home theatre, 2 macbooks, 2 ipads, 3 iphones and a dell laptop and stream media from my apple devices to my tv? I have a sony bravia 600 series and 700 series and a home theatre( sony 7100 series)

    The only way to stream directly to your TV would be if it is an AirPlay-enabled device.
    There are many AirPlay-enabled devices but I am not familiar with Sony's products. If yours do not specifically indicate AirPlay capability, then you need an AirPlay-enabled device such as an AppleTV connected to your Sony TV or Sony AVR.

  • HT5299 can i connect my sony smart TV via thunderbolt port for better resolution.

    can i connect my sony smart TV via thunderbolt port for better resolution.

    You can connect the TV via the Thunderbolt port. However if the result is "better resolution" would depend on what resolution you have now (I'm guessing you mean with the HDMI adapter?)
    I'm myself connecting the Mini Mac with a Thunderbolt->VGA adapter to my TV and get full 1920x1080 resolution.
    Have you checked your Display settings? Make sure mirroring is off, then check what resolutions you can get on the current connection.
    Please return with some more data.

  • How can I connect a Sony DCR-PC110 video camera with iMovie and import my videos?

    How can I connect my Sony video camera DCR-PC110 with iMovie in order to import my old videos?

    Hi
    This Camera has three types of ports.
    - Analog-out
    - USB
    - I.Link = FireWire = IEEE1394 = Digital in/out = DV-terminal
    And Your Camera only can send Photos via the USB-connection - NO VIDEO.
    So You Must get a FireWire Cable and eventually a ThunderBolt/FireWire converter Cable to get Import to work.
    There are no real way around this.
    Yours Bengt W

  • Can you connect a sony camcorder to a mac to edit the video

    Can I connect my Sony camcorder to my mac to get the videos on my mac and edit them?

    Yes, that is precisely what iMovie is for, but which camera, what version of iMovie do you have, and what version of OS X?

  • Can i connect thunderbolt duo hard drive to the mini display port of a late 2008 macbook pro which do not have thunderbolt port, but have mini display port.

    hi, i have a late 2008 15 inch macbook pro, which have a mini display port.
    I noticed that thunderbolt and mini display port looks a like. So, my question is :
    can i connect thunderbolt duo hard drive to the mini display port of a late 2008 macbook pro which do not have thunderbolt port, but have mini display port.
    thank you

    ken94538,
    no, you’d need a Thunderbolt-to-FireWire adapter or Thunderbolt-to-USB adapter to be able to access your Thunderbolt hard drive from your 2008 MacBook Pro.

  • Can't connect MBP to LCD projector using DVI-TO-VGA adapter

    I am trying to connect my MacBookPro to a Hitachi CP-X885 projector, which I normally connect an IBM Thinkpad to at 800x600 or 1024x768. I also use my MBP and the VGA adapter to connect to other LCD projectors and monitors (so my adapter works, as well as both systems, projector, cables, etc.). Problem is, that when I connect my MBP to the projector (I have to connect it via VGA as there is a 250 foot cable that goes to the front where the rear-projection takes place). When I do the "detect displays" nothing is detected. I also connected directly to the projector using a shorter cable, same thing (doesn't detect it). So, is the projector not supplying some type of signal to the output, that the MBP wants to see?)... is there a way to FORCE the MPB to have output? I know that if there is signal, it will display (we have LOTS of notebooks that display to the projector just fine, BUT have SEVERAL MBP's, and NONE of them will detect, and we've tried several adapters (just to be sure)... HELP!... is there some way to FORCE output from the MBP instead of it having to DETECT IT???
    Thanks!

    Sorry Walter, but according to the Terms of Use (which you agreed to the first time you logged in to the Discussions and can be found if you click on the "Help" link to the right):
    Do not post a URL unless it directly answers a user's question.
    The URL you post does not answer David's original question. Also, it could potentially void his warranty because a firmware hack (and this is indeed a link to a "hack") is an unauthorized alteration to the hardware of his computer. ("Software" can only be installed on the hard drive and that hack is not installed on the hard drive, it's installed on the firmware on a chip inside the logic board.)
    I don't want to take this thread off-topic, but your reply does NOT help David's situation. I would, however, value your input and anyone else's to this and any other topic in the Discussions as long as it is pertinent to the original subject.
    -Doug

  • Wireless connectivity with iMac G4 flat panel

    Hey everybody,
    We are thinking about buying an airport card for our imac G4 flat panel. We live in Ireland and are in the process of switching from a satellite dish-based Internet provider (connected via ethernet cable from the roof through the wall to the iMac) to our cable TV providers for a less expensive connection. The cable modem will be up in the TV room (the only cable CATV point that works), where we will attach a wireless router that will allow Internet access to the iMac downstairs and the iBook anywhere else in the house. Our cable providers offer 1, 2, 3 and 6 MB download speed packages. Here are the questions:
    1) Is the "Apple Part No. M7600LL/E" available on macwireless.com the right one for our flat panel iMac G4 from 2003?
    2) Is there any advantage to the airport card versus using a bridge? If so, which bridge is appropriate and easy to configure?
    3) Which wireless router is recommendable to link with the cable modem upstairs?
    4) Will the connection be strong enough between the router and the airport card or bridge to provide full speed and, possibly, VoIP (saving dough to one day be able to upgrade to a 20-inch iMac! LOL)? The distance is about 8 meters.
    5) If we later upgrade to a new iMac and give our son the flat panel will everything still plug and play?
    6) Which download speed package do we need to make everything run smoothly?
    7) Is it really feasible for a "layperson" to install the card themselves?
    Thanks again for your help!

    Forgot to say in my other post. There's no need to buy at that price ($199) and pay for shipping - there are plenty of UK/IE options for buying. 
    There are also alternatives like Ethernet over Mains electricity (14 or 85Mbps) which may be a better option than original Airport.
    mrtotes

  • Can I connect my Sony DCRHC42?? USB not compatible, and no firewire!

    I'm so frustrated - I used my Sony DCRHC42 camcorder with my old iMac and it was great - but now I find I have no way to connect it to my MacBook. The USB is not compatible and this computer doesn't have a firewire port! Is there a work around?

    Ok, since both are "n"s then you have two basic choices to enable the 802.11n AirPort Express Base Station's (AXn) Ethernet port to connect to the TV: 1) Configure the AXn as a Wireless-to-Ethernet bridge (ProxySTA), or 2) Configure the AXn to extend the wireless range of the 802.11n AirPort Extreme Base Station (AEBSn).
    If you don't really have a requirement to extend the wireless range of the AEBSn, I would suggest that you go with the first option: ProxySTA.
    To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility. The feature should work with any wireless network: a, b, g, or n; and 5GHz or 2.4GHz. (Note that the Express, which ships with firmware 7.3, must also be updated to firmware 7.3.1 for this feature to appear.) Configured as a ProxySTA, the AXn connects wirelessly to the AEBSn's wireless network and its Ethernet port is enabled. You can then connect a single or multiple Ethernet clients (using an Ethernet switch) to this port for network/Internet access.

  • MBP connected to Sony LCD 46X350A - No Signal Detected

    Need help.
    I've tried connecting my MBP to my Sony LCD via the VGA output (I believe that's what it is), via the cable supplied when I bought my notebook, but the message on the LCD says no signal detected.
    I've went into the System Preferences, Displays and the MBP definitely recognizes that it is connected to the LCD, but I cannot get any picture (No Signal Detected Message on LCD) either by mirroring or using the LCD as an external monitor.
    Any thoughts or suggestions from anyone?
    Many thanks in advance.

    Im having a very similar issue. I was happily using my MBP with an external Acer Display connected, until that display simply stopped working. It now only says 'No Signal' before shutting off. Zapping the PRAM and the SMC didn't get me anywhere, so I'll be taking it to the Mac Store tonight. I'll post what they'll tell me!

  • How to connect an old ADC flat panel to the new Mac mini?

    I am thinking of getting one of these new Mac mini's for the kids in the den and I have an old 20" flat panel ADC from Apple that is still going strong. Is there an adapter that will work with this configuration?
    Thanks,
    West

    Somewhat ungainly, but you'll need the mini-DVI-DVI adaptor (supplied with the new mini), and a DVI-ADC adaptor (http://store.apple.com/us/product/M8661LL/B?fnode=MTY1NDA5OQ&mco=MjE0NTg4NA)

  • How can i connect my MacBook pro to my 24" cinema display and my led tv?

    I sãs wondering if there is a way of connect my MacBook pro to my 24" cinema display trough mini displayport and my led tv trough the hdmi input. I know that is a lot of addapters but i never saw something that allows me to do it.
    Thanks for any help

    You can get a Matrox DualHead2Go:
    http://www.matrox.com/graphics/en/products/gxm/dh2go/
    There is also one for 3 monitors if you fancy that too...
    and http://www.monoprice.com sells all kinds of cable adapters for your displays

Maybe you are looking for

  • $500 equipment termination fee after paying $350 early termination fee?

    Hello, For some reason, my previous posting now says it is an unauthorized one and it cannot be accessed. I'm posting about a case of my girlfriend who upgraded to iPhone 5S 32G ($299.99+26.62) on December 23, 2013 with the 2-yr contract and had to c

  • "Slow motion" effect during songs - this is REALLY annoying!

    My iTunes has started to do this thing (usually towards the start of the song) where the song gets very choppy and/or plays in slow motion. This will happen too if I do something like rate one of the songs while music is playing. My pc has plenty of

  • Regd Customer payment/collections reports

    Hello Gurus, Can someone please tell me if there are any Customer payment/collections reports that could be run by profit center/plant and payment date. Regards, SNK.

  • RAW Best Practices

    I've used my D7000 and Apple Aperture for over a year now.  In the past, I've always shot JPEGs exclusively, but as I've read more about the virtues and flexibility of RAW, I've been considering the change.  I know you can shoot RAW+JPEG, but I'd lik

  • Changing "home" name on iMac

    I purchased a used iMac. I changed the name of my computer  (settings/sharing)  but the public folder and the name next to the "home" in finder is still wrong. How do I change these names?